! Started logfile: J0339-0146_S_1996_06_07_yyk_uvs.log on Sun Jan 7 16:05:17 2007 obs J0339-0146_S_1996_06_07_yyk_uva.fits ! Reading UV FITS file: J0339-0146_S_1996_06_07_yyk_uva.fits ! AN table 1: 53 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.898532 visibilities/baseline/integration-bin. ! Found source: J0339-0146 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 8e+06 1 8e+06 ! 02 2 2.23424e+09 8e+06 1 8e+06 ! 03 3 2.29424e+09 8e+06 1 8e+06 ! 04 4 2.32424e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 689 lines of history. ! ! Reading 8572 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0339-0146_S_1996_06_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.52682 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.939 mas, bmaj=7.082 mas, bpa=-6.203 degrees ! Estimated noise=2954.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.03681 Jy ! Component: 100 - total flux cleaned = 2.44646 Jy ! Total flux subtracted in 100 components = 2.44646 Jy ! Clean residual min=-0.058263 max=0.122822 Jy/beam ! Clean residual mean=0.002143 rms=0.022602 Jy/beam ! Combined flux in latest and established models = 2.44646 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 2.44646 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.527288Jy sigma=0.001980 ! Fit after self-cal, rms=0.526365Jy sigma=0.001976 ! Inverting map and beam ! Estimated beam: bmin=2.939 mas, bmaj=7.082 mas, bpa=-6.203 degrees ! Estimated noise=2954.01 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.519 mas, bmaj=8.925 mas, bpa=-8.869 degrees ! Estimated noise=1741.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.11801 Jy ! Component: 100 - total flux cleaned = 0.152774 Jy ! Component: 150 - total flux cleaned = 0.15484 Jy ! Component: 200 - total flux cleaned = 0.155711 Jy ! Total flux subtracted in 200 components = 0.155711 Jy ! Clean residual min=-0.061054 max=0.104186 Jy/beam ! Clean residual mean=0.002385 rms=0.021251 Jy/beam ! Combined flux in latest and established models = 2.60217 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 29 components and 2.60217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.493810Jy sigma=0.001885 ! Fit after self-cal, rms=0.493681Jy sigma=0.001885 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.519 x 8.925 at -8.869 degrees (North through East) ! Clean map min=-0.059768 max=2.3375 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02846 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.11 HN 1.03 KP 0.89 ! LA 1.01 MK 0.99 NL 0.88 OV 1.07 ! PT 0.94 SC 0.85 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.973726 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.15 HN 1.13 KP 0.93 ! LA 1.10 MK 1.04 NL 0.98 OV 1.03 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.03918 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.07 HN 0.99 KP 0.92 ! LA 0.80 MK 0.88 NL 0.94 OV 0.96 ! PT 1.08 SC 1.03 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.993005 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.07 HN 1.10 KP 0.98 ! LA 0.89 MK 1.05 NL 1.06 OV 0.93 ! PT 1.00 SC 1.01 ! ! ! Fit before self-cal, rms=0.493681Jy sigma=0.001885 ! Fit after self-cal, rms=0.408421Jy sigma=0.001559 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.408421Jy sigma=0.001559 ! Fit after self-cal, rms=0.408423Jy sigma=0.001559 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.525 mas, bmaj=8.809 mas, bpa=-8.53 degrees ! Estimated noise=1749.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, 4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.041178 Jy ! Component: 100 - total flux cleaned = 0.0522623 Jy ! Component: 150 - total flux cleaned = 0.0535418 Jy ! Component: 200 - total flux cleaned = 0.0530916 Jy ! Total flux subtracted in 200 components = 0.0530916 Jy ! Clean residual min=-0.011812 max=0.016382 Jy/beam ! Clean residual mean=0.000135 rms=0.003436 Jy/beam ! Combined flux in latest and established models = 2.65526 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 50 components and 2.65526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.403958Jy sigma=0.001544 ! Fit after self-cal, rms=0.403821Jy sigma=0.001543 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.403821Jy sigma=0.001543 ! Fit after self-cal, rms=0.379943Jy sigma=0.001469 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (36.5, 12.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136091 Jy ! Component: 100 - total flux cleaned = 0.0158677 Jy ! Component: 150 - total flux cleaned = 0.0169991 Jy ! Component: 200 - total flux cleaned = 0.0173457 Jy ! Total flux subtracted in 200 components = 0.0173457 Jy ! Clean residual min=-0.010464 max=0.010634 Jy/beam ! Clean residual mean=0.000099 rms=0.002810 Jy/beam ! Combined flux in latest and established models = 2.67261 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 78 components and 2.67261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.378372Jy sigma=0.001465 ! Fit after self-cal, rms=0.371627Jy sigma=0.001443 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.525 x 8.809 at -8.53 degrees (North through East) ! Clean map min=-0.01037 max=2.3593 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.371627Jy sigma=0.001443 ! Fit after self-cal, rms=0.342703Jy sigma=0.001330 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.342703Jy sigma=0.001330 ! Fit after self-cal, rms=0.339648Jy sigma=0.001320 ! Inverting map and beam ! Estimated beam: bmin=3.517 mas, bmaj=8.77 mas, bpa=-8.419 degrees ! Estimated noise=1743.98 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00459647 Jy ! Component: 100 - total flux cleaned = 0.00407862 Jy ! Component: 150 - total flux cleaned = 0.00335501 Jy ! Component: 200 - total flux cleaned = 0.00313412 Jy ! Total flux subtracted in 200 components = 0.00313412 Jy ! Clean residual min=-0.009471 max=0.009435 Jy/beam ! Clean residual mean=0.000142 rms=0.002331 Jy/beam ! Combined flux in latest and established models = 2.67574 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 100 components and 2.67574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.339164Jy sigma=0.001318 ! Fit after self-cal, rms=0.337516Jy sigma=0.001313 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.337516Jy sigma=0.001313 ! Fit after self-cal, rms=0.335723Jy sigma=0.001306 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.335723Jy sigma=0.001306 ! Fit after self-cal, rms=0.334799Jy sigma=0.001303 ! Inverting map and beam ! Estimated beam: bmin=3.514 mas, bmaj=8.763 mas, bpa=-8.392 degrees ! Estimated noise=1743.48 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100542 Jy ! Component: 100 - total flux cleaned = 0.000803806 Jy ! Component: 150 - total flux cleaned = 0.000800696 Jy ! Component: 200 - total flux cleaned = 0.000797969 Jy ! Total flux subtracted in 200 components = 0.000797969 Jy ! Clean residual min=-0.009195 max=0.008847 Jy/beam ! Clean residual mean=0.000155 rms=0.002192 Jy/beam ! Combined flux in latest and established models = 2.67654 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 113 components and 2.67654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.334523Jy sigma=0.001302 ! Fit after self-cal, rms=0.333935Jy sigma=0.001300 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.313 mas, bmaj=13.57 mas, bpa=7.364 degrees ! Estimated noise=2135.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246066 Jy ! Component: 100 - total flux cleaned = 0.0023285 Jy ! Component: 150 - total flux cleaned = 0.00221035 Jy ! Component: 200 - total flux cleaned = 0.00198889 Jy ! Total flux subtracted in 200 components = 0.00198889 Jy ! Clean residual min=-0.009814 max=0.007886 Jy/beam ! Clean residual mean=0.000259 rms=0.002443 Jy/beam ! Combined flux in latest and established models = 2.67853 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 129 components and 2.67852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.333879Jy sigma=0.001300 ! Fit after self-cal, rms=0.333487Jy sigma=0.001298 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.938 mas, bmaj=7.009 mas, bpa=-5.677 degrees ! Estimated noise=2946.61 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.0357 Jy ! Component: 100 - total flux cleaned = 2.44198 Jy ! Component: 150 - total flux cleaned = 2.56299 Jy ! Component: 200 - total flux cleaned = 2.61454 Jy ! Total flux subtracted in 200 components = 2.61454 Jy ! Clean residual min=-0.018050 max=0.023301 Jy/beam ! Clean residual mean=0.000355 rms=0.005816 Jy/beam ! Combined flux in latest and established models = 2.61453 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 2.61453 Jy ! Inverting map and beam ! Estimated beam: bmin=3.514 mas, bmaj=8.763 mas, bpa=-8.392 degrees ! Estimated noise=1743.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0334564 Jy ! Component: 100 - total flux cleaned = 0.0497426 Jy ! Component: 150 - total flux cleaned = 0.0526512 Jy ! Component: 200 - total flux cleaned = 0.0541547 Jy ! Total flux subtracted in 200 components = 0.0541547 Jy ! Clean residual min=-0.010678 max=0.010491 Jy/beam ! Clean residual mean=0.000187 rms=0.002794 Jy/beam ! Combined flux in latest and established models = 2.66869 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 50 components and 2.66869 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.313 mas, bmaj=13.57 mas, bpa=7.364 degrees ! Estimated noise=2135.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0037373 Jy ! Component: 100 - total flux cleaned = 0.0050082 Jy ! Component: 150 - total flux cleaned = 0.00541418 Jy ! Component: 200 - total flux cleaned = 0.00541422 Jy ! Total flux subtracted in 200 components = 0.00541422 Jy ! Clean residual min=-0.010790 max=0.008751 Jy/beam ! Clean residual mean=0.000299 rms=0.002556 Jy/beam ! Combined flux in latest and established models = 2.6741 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 77 components and 2.6741 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.514 mas, bmaj=8.763 mas, bpa=-8.392 degrees ! Estimated noise=1743.48 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00122656 Jy ! Component: 100 - total flux cleaned = -0.00191528 Jy ! Component: 150 - total flux cleaned = -0.00219139 Jy ! Component: 200 - total flux cleaned = -0.00244338 Jy ! Total flux subtracted in 200 components = -0.00244338 Jy ! Clean residual min=-0.009377 max=0.008792 Jy/beam ! Clean residual mean=0.000171 rms=0.002276 Jy/beam ! Combined flux in latest and established models = 2.67166 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 94 components and 2.67166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.333649Jy sigma=0.001299 ! Fit after self-cal, rms=0.333341Jy sigma=0.001298 wmodel J0339-0146_S_1996_06_07_yyk\_map.mod ! Writing 94 model components to file: J0339-0146_S_1996_06_07_yyk_map.mod wobs J0339-0146_S_1996_06_07_yyk\_uvs.fits ! Writing UV FITS file: J0339-0146_S_1996_06_07_yyk_uvs.fits wwins J0339-0146_S_1996_06_07_yyk\_map.win ! wwins: Wrote 3 windows to J0339-0146_S_1996_06_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00125575 Jy ! Component: 100 - total flux cleaned = 0.000446494 Jy ! Component: 150 - total flux cleaned = 0.00252982 Jy ! Component: 200 - total flux cleaned = 0.0044426 Jy ! Component: 250 - total flux cleaned = 0.00622513 Jy ! Component: 300 - total flux cleaned = 0.007808 Jy ! Component: 350 - total flux cleaned = 0.0095137 Jy ! Component: 400 - total flux cleaned = 0.0108583 Jy ! Component: 450 - total flux cleaned = 0.0119663 Jy ! Component: 500 - total flux cleaned = 0.0132122 Jy ! Component: 550 - total flux cleaned = 0.0141563 Jy ! Component: 600 - total flux cleaned = 0.0150688 Jy ! Component: 650 - total flux cleaned = 0.0157906 Jy ! Component: 700 - total flux cleaned = 0.0164132 Jy ! Component: 750 - total flux cleaned = 0.0168667 Jy ! Component: 800 - total flux cleaned = 0.0173058 Jy ! Component: 850 - total flux cleaned = 0.0175202 Jy ! Component: 900 - total flux cleaned = 0.0177982 Jy ! Component: 950 - total flux cleaned = 0.0179332 Jy ! Component: 1000 - total flux cleaned = 0.0179339 Jy ! Component: 1050 - total flux cleaned = 0.0179335 Jy ! Component: 1100 - total flux cleaned = 0.0179954 Jy ! Component: 1150 - total flux cleaned = 0.0179938 Jy ! Component: 1200 - total flux cleaned = 0.0178112 Jy ! Component: 1250 - total flux cleaned = 0.0175752 Jy ! Component: 1300 - total flux cleaned = 0.0176351 Jy ! Component: 1350 - total flux cleaned = 0.0176927 Jy ! Component: 1400 - total flux cleaned = 0.0177481 Jy ! Component: 1450 - total flux cleaned = 0.0178021 Jy ! Component: 1500 - total flux cleaned = 0.0177471 Jy ! Component: 1550 - total flux cleaned = 0.0176944 Jy ! Component: 1600 - total flux cleaned = 0.0178531 Jy ! Component: 1650 - total flux cleaned = 0.0181123 Jy ! Component: 1700 - total flux cleaned = 0.0181625 Jy ! Component: 1750 - total flux cleaned = 0.0182129 Jy ! Component: 1800 - total flux cleaned = 0.0182137 Jy ! Component: 1850 - total flux cleaned = 0.0181662 Jy ! Component: 1900 - total flux cleaned = 0.0181671 Jy ! Component: 1950 - total flux cleaned = 0.0181684 Jy ! Component: 2000 - total flux cleaned = 0.0181687 Jy ! Total flux subtracted in 2048 components = 0.0181686 Jy ! Clean residual min=-0.002907 max=0.003219 Jy/beam ! Clean residual mean=0.000073 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 2.68983 Jy keep ! Adding 110 model components to the UV plane model. ! The established model now contains 203 components and 2.68983 Jy ![Exited script file: muppet] wmap "J0339-0146_S_1996_06_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.514 x 8.763 at -8.392 degrees (North through East) ! Clean map min=-0.0055676 max=2.3631 Jy/beam ! Writing clean map to FITS file: J0339-0146_S_1996_06_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.36305 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000913501 device "J0339-0146_S_1996_06_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J0339-0146_S_1996_06_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.115973 0.115973 0.231946 0.463892 0.927785 1.85557 3.71114 7.42228 14.8446 29.6891 59.3782 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(peak_flux*1000)/1000 ! peak= 2.363 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.514 x 8.763 at -8.392 degrees (North through East) ! Clean map min=-0.0055676 max=2.3631 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0339-0146_S_1996_06_07_yyk\_map.gif/gif" ! Attempting to open device: 'J0339-0146_S_1996_06_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0339-0146_S_1996_06_07_yyk_uvs.log closed on Sun Jan 7 16:05:23 2007