! Started logfile: J0339-0146_S_1996_05_15_yyk_uvs.log on Sun Jan 7 16:05:11 2007 obs J0339-0146_S_1996_05_15_yyk_uva.fits ! Reading UV FITS file: J0339-0146_S_1996_05_15_yyk_uva.fits ! AN table 1: 106 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.778407 visibilities/baseline/integration-bin. ! Found source: J0339-0146 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 8e+06 1 8e+06 ! 02 2 2.23424e+09 8e+06 1 8e+06 ! 03 3 2.29424e+09 8e+06 1 8e+06 ! 04 4 2.32424e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 617 lines of history. ! ! Reading 14852 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0339-0146_S_1996_05_15_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.4839 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.738 mas, bmaj=7.103 mas, bpa=-3.899 degrees ! Estimated noise=1627.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.90758 Jy ! Component: 100 - total flux cleaned = 2.28481 Jy ! Total flux subtracted in 100 components = 2.28481 Jy ! Clean residual min=-0.136654 max=0.199726 Jy/beam ! Clean residual mean=0.000198 rms=0.045917 Jy/beam ! Combined flux in latest and established models = 2.28481 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 2.28481 Jy ! ! Correcting IF 1. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.743951Jy sigma=0.003013 ! Fit after self-cal, rms=0.742222Jy sigma=0.003000 ! Inverting map and beam ! Estimated beam: bmin=2.738 mas, bmaj=7.102 mas, bpa=-3.899 degrees ! Estimated noise=1627.9 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.293 mas, bmaj=8.327 mas, bpa=-5.015 degrees ! Estimated noise=1188.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.225061 Jy ! Component: 100 - total flux cleaned = 0.291987 Jy ! Component: 150 - total flux cleaned = 0.298779 Jy ! Component: 200 - total flux cleaned = 0.299863 Jy ! Total flux subtracted in 200 components = 0.299863 Jy ! Clean residual min=-0.057861 max=0.094671 Jy/beam ! Clean residual mean=0.000648 rms=0.021279 Jy/beam ! Combined flux in latest and established models = 2.58468 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 27 components and 2.58468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.689584Jy sigma=0.002736 ! Fit after self-cal, rms=0.689554Jy sigma=0.002736 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.293 x 8.327 at -5.015 degrees (North through East) ! Clean map min=-0.057023 max=2.3228 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02272 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.08 HN 1.03 KP 0.88 ! LA 0.94 MK 0.95 NL 0.90 OV 1.21 ! PT 0.94 SC 0.89 ! ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.968273 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.13 HN 1.18 KP 0.92 ! LA 1.04 MK 1.00 NL 0.98 OV 1.16 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.03745 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.04 HN 0.97 KP 0.91 ! LA 0.79 MK 0.87 NL 0.95 OV 1.08 ! PT 1.06 SC 1.03 ! ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.989475 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 1.12 KP 0.96 ! LA 0.88 MK 1.03 NL 1.06 OV 1.04 ! PT 0.98 SC 0.99 ! ! ! Fit before self-cal, rms=0.689554Jy sigma=0.002736 ! Fit after self-cal, rms=0.639941Jy sigma=0.002423 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.639941Jy sigma=0.002423 ! Fit after self-cal, rms=0.639857Jy sigma=0.002423 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.301 mas, bmaj=8.281 mas, bpa=-4.793 degrees ! Estimated noise=1182.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100744 Jy ! Component: 100 - total flux cleaned = 0.00878372 Jy ! Component: 150 - total flux cleaned = 0.00802272 Jy ! Component: 200 - total flux cleaned = 0.00694697 Jy ! Total flux subtracted in 200 components = 0.00694697 Jy ! Clean residual min=-0.045689 max=0.040460 Jy/beam ! Clean residual mean=-0.000010 rms=0.012430 Jy/beam ! Combined flux in latest and established models = 2.59162 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 2.59162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.639258Jy sigma=0.002421 ! Fit after self-cal, rms=0.639249Jy sigma=0.002421 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.639249Jy sigma=0.002421 ! Fit after self-cal, rms=0.631217Jy sigma=0.002371 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0004518 Jy ! Component: 100 - total flux cleaned = -0.00045385 Jy ! Component: 150 - total flux cleaned = -0.00125149 Jy ! Component: 200 - total flux cleaned = -0.00199471 Jy ! Total flux subtracted in 200 components = -0.00199471 Jy ! Clean residual min=-0.044866 max=0.040973 Jy/beam ! Clean residual mean=-0.000005 rms=0.012386 Jy/beam ! Combined flux in latest and established models = 2.58963 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 42 components and 2.58963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.630916Jy sigma=0.002370 ! Fit after self-cal, rms=0.628680Jy sigma=0.002357 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.301 x 8.281 at -4.793 degrees (North through East) ! Clean map min=-0.044314 max=2.3276 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.628680Jy sigma=0.002357 ! Fit after self-cal, rms=4.985415Jy sigma=0.001669 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.985415Jy sigma=0.001669 ! Fit after self-cal, rms=4.985343Jy sigma=0.001662 ! Inverting map and beam ! Estimated beam: bmin=3.302 mas, bmaj=8.296 mas, bpa=-4.776 degrees ! Estimated noise=1170.5 mJy/beam. ! Added new window around map position (5, 3). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0208926 Jy ! Component: 100 - total flux cleaned = 0.0213131 Jy ! Component: 150 - total flux cleaned = 0.021645 Jy ! Component: 200 - total flux cleaned = 0.0213298 Jy ! Total flux subtracted in 200 components = 0.0213298 Jy ! Clean residual min=-0.008823 max=0.009942 Jy/beam ! Clean residual mean=-0.000044 rms=0.002380 Jy/beam ! Combined flux in latest and established models = 2.61096 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 62 components and 2.61096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.985412Jy sigma=0.001656 ! Fit after self-cal, rms=4.985387Jy sigma=0.001652 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.985387Jy sigma=0.001652 ! Fit after self-cal, rms=4.998852Jy sigma=0.001644 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.998852Jy sigma=0.001644 ! Fit after self-cal, rms=4.998862Jy sigma=0.001642 ! Inverting map and beam ! Estimated beam: bmin=3.295 mas, bmaj=8.275 mas, bpa=-4.676 degrees ! Estimated noise=1170.4 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00982085 Jy ! Component: 100 - total flux cleaned = 0.00959195 Jy ! Component: 150 - total flux cleaned = 0.00937202 Jy ! Component: 200 - total flux cleaned = 0.00917258 Jy ! Total flux subtracted in 200 components = 0.00917258 Jy ! Clean residual min=-0.007143 max=0.008403 Jy/beam ! Clean residual mean=-0.000048 rms=0.002023 Jy/beam ! Combined flux in latest and established models = 2.62013 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 77 components and 2.62013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.998935Jy sigma=0.001640 ! Fit after self-cal, rms=4.998921Jy sigma=0.001639 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.9 mas, bmaj=13.02 mas, bpa=-2.228 degrees ! Estimated noise=1481.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 9.71035e-05 Jy ! Component: 100 - total flux cleaned = -0.000538233 Jy ! Component: 150 - total flux cleaned = -0.000835594 Jy ! Component: 200 - total flux cleaned = -0.00101226 Jy ! Total flux subtracted in 200 components = -0.00101226 Jy ! Clean residual min=-0.007024 max=0.008698 Jy/beam ! Clean residual mean=-0.000106 rms=0.002450 Jy/beam ! Combined flux in latest and established models = 2.61912 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 95 components and 2.61912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.998937Jy sigma=0.001639 ! Fit after self-cal, rms=4.998917Jy sigma=0.001638 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.69 mas, bmaj=7.014 mas, bpa=-3.632 degrees ! Estimated noise=1692.41 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.97109 Jy ! Component: 100 - total flux cleaned = 2.38332 Jy ! Component: 150 - total flux cleaned = 2.52525 Jy ! Component: 200 - total flux cleaned = 2.58592 Jy ! Total flux subtracted in 200 components = 2.58592 Jy ! Clean residual min=-0.014913 max=0.020806 Jy/beam ! Clean residual mean=0.000076 rms=0.004112 Jy/beam ! Combined flux in latest and established models = 2.58592 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 2.58592 Jy ! Inverting map and beam ! Estimated beam: bmin=3.295 mas, bmaj=8.275 mas, bpa=-4.676 degrees ! Estimated noise=1170.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0304775 Jy ! Component: 100 - total flux cleaned = 0.0325771 Jy ! Component: 150 - total flux cleaned = 0.0331702 Jy ! Component: 200 - total flux cleaned = 0.0336488 Jy ! Total flux subtracted in 200 components = 0.0336488 Jy ! Clean residual min=-0.009500 max=0.009498 Jy/beam ! Clean residual mean=-0.000026 rms=0.002365 Jy/beam ! Combined flux in latest and established models = 2.61957 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 33 components and 2.61957 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.9 mas, bmaj=13.02 mas, bpa=-2.228 degrees ! Estimated noise=1481.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00069724 Jy ! Component: 100 - total flux cleaned = 0.000245336 Jy ! Component: 150 - total flux cleaned = 6.31708e-05 Jy ! Component: 200 - total flux cleaned = -9.29327e-05 Jy ! Total flux subtracted in 200 components = -9.29327e-05 Jy ! Clean residual min=-0.007715 max=0.008466 Jy/beam ! Clean residual mean=-0.000091 rms=0.002575 Jy/beam ! Combined flux in latest and established models = 2.61948 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 53 components and 2.61948 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.295 mas, bmaj=8.275 mas, bpa=-4.676 degrees ! Estimated noise=1170.4 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000761903 Jy ! Component: 100 - total flux cleaned = 0.00103491 Jy ! Component: 150 - total flux cleaned = 0.001028 Jy ! Component: 200 - total flux cleaned = 0.00123716 Jy ! Total flux subtracted in 200 components = 0.00123716 Jy ! Clean residual min=-0.007918 max=0.008412 Jy/beam ! Clean residual mean=-0.000050 rms=0.002050 Jy/beam ! Combined flux in latest and established models = 2.62072 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 70 components and 2.62072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.998881Jy sigma=0.001639 ! Fit after self-cal, rms=4.998861Jy sigma=0.001638 wmodel J0339-0146_S_1996_05_15_yyk\_map.mod ! Writing 70 model components to file: J0339-0146_S_1996_05_15_yyk_map.mod wobs J0339-0146_S_1996_05_15_yyk\_uvs.fits ! Writing UV FITS file: J0339-0146_S_1996_05_15_yyk_uvs.fits wwins J0339-0146_S_1996_05_15_yyk\_map.win ! wwins: Wrote 2 windows to J0339-0146_S_1996_05_15_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197591 Jy ! Component: 100 - total flux cleaned = 0.00288822 Jy ! Component: 150 - total flux cleaned = 0.00348091 Jy ! Component: 200 - total flux cleaned = 0.00348386 Jy ! Component: 250 - total flux cleaned = 0.00369371 Jy ! Component: 300 - total flux cleaned = 0.0040943 Jy ! Component: 350 - total flux cleaned = 0.00467527 Jy ! Component: 400 - total flux cleaned = 0.00514462 Jy ! Component: 450 - total flux cleaned = 0.00559773 Jy ! Component: 500 - total flux cleaned = 0.00594663 Jy ! Component: 550 - total flux cleaned = 0.00602965 Jy ! Component: 600 - total flux cleaned = 0.00611465 Jy ! Component: 650 - total flux cleaned = 0.00611665 Jy ! Component: 700 - total flux cleaned = 0.00643174 Jy ! Component: 750 - total flux cleaned = 0.00635391 Jy ! Component: 800 - total flux cleaned = 0.0062788 Jy ! Component: 850 - total flux cleaned = 0.00613304 Jy ! Component: 900 - total flux cleaned = 0.00634785 Jy ! Component: 950 - total flux cleaned = 0.00641721 Jy ! Component: 1000 - total flux cleaned = 0.00655622 Jy ! Component: 1050 - total flux cleaned = 0.00703039 Jy ! Component: 1100 - total flux cleaned = 0.00729595 Jy ! Component: 1150 - total flux cleaned = 0.0076199 Jy ! Component: 1200 - total flux cleaned = 0.0077477 Jy ! Component: 1250 - total flux cleaned = 0.00793766 Jy ! Component: 1300 - total flux cleaned = 0.008372 Jy ! Component: 1350 - total flux cleaned = 0.00861674 Jy ! Component: 1400 - total flux cleaned = 0.00897579 Jy ! Component: 1450 - total flux cleaned = 0.0089748 Jy ! Component: 1500 - total flux cleaned = 0.00926661 Jy ! Component: 1550 - total flux cleaned = 0.00949696 Jy ! Component: 1600 - total flux cleaned = 0.00983724 Jy ! Component: 1650 - total flux cleaned = 0.0101156 Jy ! Component: 1700 - total flux cleaned = 0.0103364 Jy ! Component: 1750 - total flux cleaned = 0.0105542 Jy ! Component: 1800 - total flux cleaned = 0.0109836 Jy ! Component: 1850 - total flux cleaned = 0.011195 Jy ! Component: 1900 - total flux cleaned = 0.0114568 Jy ! Component: 1950 - total flux cleaned = 0.0116113 Jy ! Component: 2000 - total flux cleaned = 0.0118654 Jy ! Total flux subtracted in 2048 components = 0.0121168 Jy ! Clean residual min=-0.002705 max=0.002996 Jy/beam ! Clean residual mean=-0.000002 rms=0.001001 Jy/beam ! Combined flux in latest and established models = 2.63283 Jy keep ! Adding 127 model components to the UV plane model. ! The established model now contains 197 components and 2.63283 Jy ![Exited script file: muppet] wmap "J0339-0146_S_1996_05_15_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.295 x 8.275 at -4.676 degrees (North through East) ! Clean map min=-0.0059992 max=2.32 Jy/beam ! Writing clean map to FITS file: J0339-0146_S_1996_05_15_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.31997 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000986789 device "J0339-0146_S_1996_05_15_yyk\_map.eps/VPS" ! Attempting to open device: 'J0339-0146_S_1996_05_15_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.127603 0.127603 0.255207 0.510414 1.02083 2.04165 4.08331 8.16662 16.3332 32.6665 65.333 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(peak_flux*1000)/1000 ! peak= 2.319 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.295 x 8.275 at -4.676 degrees (North through East) ! Clean map min=-0.0059992 max=2.32 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0339-0146_S_1996_05_15_yyk\_map.gif/gif" ! Attempting to open device: 'J0339-0146_S_1996_05_15_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0339-0146_S_1996_05_15_yyk_uvs.log closed on Sun Jan 7 16:05:17 2007