! Started logfile: J0339-0146_S_1994_08_12_yyk_uvs.log on Sun Jan 7 16:04:48 2007 obs J0339-0146_S_1994_08_12_yyk_uva.fits ! Reading UV FITS file: J0339-0146_S_1994_08_12_yyk_uva.fits ! AN table 1: 45 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.793086 visibilities/baseline/integration-bin. ! Found source: J0339-0146 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 4e+06 1 4e+06 ! 02 2 2.23236e+09 4e+06 1 4e+06 ! 03 3 2.29236e+09 4e+06 1 4e+06 ! 04 4 2.32236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 783 lines of history. ! ! Reading 6424 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0339-0146_S_1994_08_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.56498 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.713 mas, bmaj=7.006 mas, bpa=-4.37 degrees ! Estimated noise=2247.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.96922 Jy ! Component: 100 - total flux cleaned = 2.48905 Jy ! Total flux subtracted in 100 components = 2.48905 Jy ! Clean residual min=-0.161286 max=0.287808 Jy/beam ! Clean residual mean=0.001542 rms=0.054013 Jy/beam ! Combined flux in latest and established models = 2.48905 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 2.48905 Jy ! ! Correcting IF 1. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.720568Jy sigma=0.004153 ! Fit after self-cal, rms=0.719481Jy sigma=0.004146 ! Inverting map and beam ! Estimated beam: bmin=3.713 mas, bmaj=7.006 mas, bpa=-4.37 degrees ! Estimated noise=2307.7 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.565 mas, bmaj=8.782 mas, bpa=-4.596 degrees ! Estimated noise=1385.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.145167 Jy ! Component: 100 - total flux cleaned = 0.148767 Jy ! Component: 150 - total flux cleaned = 0.154134 Jy ! Component: 200 - total flux cleaned = 0.158469 Jy ! Total flux subtracted in 200 components = 0.158469 Jy ! Clean residual min=-0.116231 max=0.130387 Jy/beam ! Clean residual mean=0.002356 rms=0.031494 Jy/beam ! Combined flux in latest and established models = 2.64752 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 25 components and 2.64752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.653624Jy sigma=0.003874 ! Fit after self-cal, rms=0.653499Jy sigma=0.003873 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.565 x 8.782 at -4.596 degrees (North through East) ! Clean map min=-0.10925 max=2.2445 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02272 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.03 HN 0.96 KP 0.91 ! LA 0.97 MK 1.29 NL 0.88 OV 0.98 ! PT 0.96 SC 0.88 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00048 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.11 HN 0.98 KP 0.93 ! LA 1.06 MK 1.31 NL 0.83 OV 0.96 ! PT 0.94 SC 0.93 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00642 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.06 HN 0.95 KP 0.93 ! LA 0.84 MK 1.21 NL 0.92 OV 1.04 ! PT 1.10 SC 0.97 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.955827 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.11 HN 1.01 KP 0.99 ! LA 0.89 MK 1.38 NL 0.90 OV 1.32 ! PT 0.96 SC 0.93 ! ! ! Fit before self-cal, rms=0.653499Jy sigma=0.003873 ! Fit after self-cal, rms=0.609021Jy sigma=0.003267 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.609021Jy sigma=0.003267 ! Fit after self-cal, rms=0.609010Jy sigma=0.003267 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.99 mas, bmaj=8.94 mas, bpa=3.508 degrees ! Estimated noise=1369.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0524471 Jy ! Component: 100 - total flux cleaned = -0.056293 Jy ! Component: 150 - total flux cleaned = -0.0579696 Jy ! Component: 200 - total flux cleaned = -0.06094 Jy ! Total flux subtracted in 200 components = -0.06094 Jy ! Clean residual min=-0.055004 max=0.079017 Jy/beam ! Clean residual mean=0.000467 rms=0.017030 Jy/beam ! Combined flux in latest and established models = 2.58658 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 38 components and 2.58658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.596709Jy sigma=0.003186 ! Fit after self-cal, rms=0.596593Jy sigma=0.003185 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.596593Jy sigma=0.003185 ! Fit after self-cal, rms=0.583379Jy sigma=0.003095 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16, -13). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0196918 Jy ! Component: 100 - total flux cleaned = 0.00528934 Jy ! Component: 150 - total flux cleaned = 0.000201593 Jy ! Component: 200 - total flux cleaned = -0.00209509 Jy ! Total flux subtracted in 200 components = -0.00209509 Jy ! Clean residual min=-0.047949 max=0.075220 Jy/beam ! Clean residual mean=0.000540 rms=0.015736 Jy/beam ! Combined flux in latest and established models = 2.58449 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 52 components and 2.58449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.549889Jy sigma=0.002942 ! Fit after self-cal, rms=0.547232Jy sigma=0.002925 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.99 x 8.94 at 3.508 degrees (North through East) ! Clean map min=-0.049528 max=2.2857 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.547232Jy sigma=0.002925 ! Fit after self-cal, rms=1.973312Jy sigma=0.002081 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.973312Jy sigma=0.002081 ! Fit after self-cal, rms=1.973125Jy sigma=0.002079 ! Inverting map and beam ! Estimated beam: bmin=4.677 mas, bmaj=8.927 mas, bpa=0.9237 degrees ! Estimated noise=1352.52 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00678921 Jy ! Component: 100 - total flux cleaned = -0.00371158 Jy ! Component: 150 - total flux cleaned = -0.00365906 Jy ! Component: 200 - total flux cleaned = -0.00234232 Jy ! Total flux subtracted in 200 components = -0.00234232 Jy ! Clean residual min=-0.026814 max=0.029138 Jy/beam ! Clean residual mean=0.000513 rms=0.007217 Jy/beam ! Combined flux in latest and established models = 2.58214 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 73 components and 2.58214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.971238Jy sigma=0.002018 ! Fit after self-cal, rms=1.971261Jy sigma=0.002017 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.971261Jy sigma=0.002017 ! Fit after self-cal, rms=2.106001Jy sigma=0.002006 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.106001Jy sigma=0.002006 ! Fit after self-cal, rms=2.106124Jy sigma=0.002006 ! Inverting map and beam ! Estimated beam: bmin=4.664 mas, bmaj=8.896 mas, bpa=1.263 degrees ! Estimated noise=1349.64 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00339834 Jy ! Component: 100 - total flux cleaned = -0.00335574 Jy ! Component: 150 - total flux cleaned = -0.00329264 Jy ! Component: 200 - total flux cleaned = -0.00328588 Jy ! Total flux subtracted in 200 components = -0.00328588 Jy ! Clean residual min=-0.022197 max=0.025058 Jy/beam ! Clean residual mean=0.000417 rms=0.006080 Jy/beam ! Combined flux in latest and established models = 2.57886 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 80 components and 2.57886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.105192Jy sigma=0.001976 ! Fit after self-cal, rms=2.105225Jy sigma=0.001976 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.608 mas, bmaj=13.26 mas, bpa=11.39 degrees ! Estimated noise=1537.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00234517 Jy ! Component: 100 - total flux cleaned = -0.00284058 Jy ! Component: 150 - total flux cleaned = -0.00327886 Jy ! Component: 200 - total flux cleaned = -0.0032781 Jy ! Total flux subtracted in 200 components = -0.0032781 Jy ! Clean residual min=-0.019023 max=0.017781 Jy/beam ! Clean residual mean=0.000764 rms=0.005431 Jy/beam ! Combined flux in latest and established models = 2.57558 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 94 components and 2.57558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.105071Jy sigma=0.001970 ! Fit after self-cal, rms=2.105048Jy sigma=0.001970 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.746 mas, bmaj=7.286 mas, bpa=2.244 degrees ! Estimated noise=2449.98 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.0321 Jy ! Component: 100 - total flux cleaned = 2.38373 Jy ! Component: 150 - total flux cleaned = 2.48557 Jy ! Component: 200 - total flux cleaned = 2.50926 Jy ! Total flux subtracted in 200 components = 2.50926 Jy ! Clean residual min=-0.032099 max=0.043082 Jy/beam ! Clean residual mean=0.000523 rms=0.008740 Jy/beam ! Combined flux in latest and established models = 2.50926 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 2.50926 Jy ! Inverting map and beam ! Estimated beam: bmin=4.664 mas, bmaj=8.896 mas, bpa=1.263 degrees ! Estimated noise=1349.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, 4.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0487061 Jy ! Component: 100 - total flux cleaned = 0.0586799 Jy ! Component: 150 - total flux cleaned = 0.0611728 Jy ! Component: 200 - total flux cleaned = 0.0618549 Jy ! Total flux subtracted in 200 components = 0.0618549 Jy ! Clean residual min=-0.014910 max=0.014908 Jy/beam ! Clean residual mean=0.000542 rms=0.004217 Jy/beam ! Combined flux in latest and established models = 2.57111 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 52 components and 2.57111 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.608 mas, bmaj=13.26 mas, bpa=11.39 degrees ! Estimated noise=1537.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00472859 Jy ! Component: 100 - total flux cleaned = 0.00436532 Jy ! Component: 150 - total flux cleaned = 0.00377537 Jy ! Component: 200 - total flux cleaned = 0.00350848 Jy ! Total flux subtracted in 200 components = 0.00350848 Jy ! Clean residual min=-0.013495 max=0.012062 Jy/beam ! Clean residual mean=0.000806 rms=0.003992 Jy/beam ! Combined flux in latest and established models = 2.57462 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 74 components and 2.57462 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.664 mas, bmaj=8.896 mas, bpa=1.263 degrees ! Estimated noise=1349.64 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000969604 Jy ! Component: 100 - total flux cleaned = 0.00235898 Jy ! Component: 150 - total flux cleaned = 0.00356982 Jy ! Component: 200 - total flux cleaned = 0.00430528 Jy ! Total flux subtracted in 200 components = 0.00430528 Jy ! Clean residual min=-0.013396 max=0.012791 Jy/beam ! Clean residual mean=0.000483 rms=0.003562 Jy/beam ! Combined flux in latest and established models = 2.57893 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 94 components and 2.57893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.107609Jy sigma=0.001920 ! Fit after self-cal, rms=2.116216Jy sigma=0.001917 wmodel J0339-0146_S_1994_08_12_yyk\_map.mod ! Writing 94 model components to file: J0339-0146_S_1994_08_12_yyk_map.mod wobs J0339-0146_S_1994_08_12_yyk\_uvs.fits ! Writing UV FITS file: J0339-0146_S_1994_08_12_yyk_uvs.fits wwins J0339-0146_S_1994_08_12_yyk\_map.win ! wwins: Wrote 3 windows to J0339-0146_S_1994_08_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121357 Jy ! Component: 100 - total flux cleaned = 0.00225289 Jy ! Component: 150 - total flux cleaned = 0.0028251 Jy ! Component: 200 - total flux cleaned = 0.00334839 Jy ! Component: 250 - total flux cleaned = 0.00417526 Jy ! Component: 300 - total flux cleaned = 0.00527292 Jy ! Component: 350 - total flux cleaned = 0.00661852 Jy ! Component: 400 - total flux cleaned = 0.00834378 Jy ! Component: 450 - total flux cleaned = 0.00987233 Jy ! Component: 500 - total flux cleaned = 0.0110885 Jy ! Component: 550 - total flux cleaned = 0.0124023 Jy ! Component: 600 - total flux cleaned = 0.0138036 Jy ! Component: 650 - total flux cleaned = 0.0149188 Jy ! Component: 700 - total flux cleaned = 0.0161255 Jy ! Component: 750 - total flux cleaned = 0.0168338 Jy ! Component: 800 - total flux cleaned = 0.0178775 Jy ! Component: 850 - total flux cleaned = 0.0187841 Jy ! Component: 900 - total flux cleaned = 0.0197856 Jy ! Component: 950 - total flux cleaned = 0.0207659 Jy ! Component: 1000 - total flux cleaned = 0.0215153 Jy ! Component: 1050 - total flux cleaned = 0.0223556 Jy ! Component: 1100 - total flux cleaned = 0.0232826 Jy ! Component: 1150 - total flux cleaned = 0.0241944 Jy ! Component: 1200 - total flux cleaned = 0.0248913 Jy ! Component: 1250 - total flux cleaned = 0.0256737 Jy ! Component: 1300 - total flux cleaned = 0.02625 Jy ! Component: 1350 - total flux cleaned = 0.0268203 Jy ! Component: 1400 - total flux cleaned = 0.0279381 Jy ! Component: 1450 - total flux cleaned = 0.0288529 Jy ! Component: 1500 - total flux cleaned = 0.0295753 Jy ! Component: 1550 - total flux cleaned = 0.0304609 Jy ! Component: 1600 - total flux cleaned = 0.0310712 Jy ! Component: 1650 - total flux cleaned = 0.0317602 Jy ! Component: 1700 - total flux cleaned = 0.0322681 Jy ! Component: 1750 - total flux cleaned = 0.0325184 Jy ! Component: 1800 - total flux cleaned = 0.0330957 Jy ! Component: 1850 - total flux cleaned = 0.0332572 Jy ! Component: 1900 - total flux cleaned = 0.0336596 Jy ! Component: 1950 - total flux cleaned = 0.0342947 Jy ! Component: 2000 - total flux cleaned = 0.0346086 Jy ! Total flux subtracted in 2048 components = 0.0346872 Jy ! Clean residual min=-0.004334 max=0.004443 Jy/beam ! Clean residual mean=0.000236 rms=0.001613 Jy/beam ! Combined flux in latest and established models = 2.61361 Jy keep ! Adding 131 model components to the UV plane model. ! The established model now contains 224 components and 2.61361 Jy ![Exited script file: muppet] wmap "J0339-0146_S_1994_08_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.664 x 8.896 at 1.263 degrees (North through East) ! Clean map min=-0.012257 max=2.3329 Jy/beam ! Writing clean map to FITS file: J0339-0146_S_1994_08_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.33294 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00161645 device "J0339-0146_S_1994_08_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J0339-0146_S_1994_08_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.207864 0.207864 0.415728 0.831455 1.66291 3.32582 6.65164 13.3033 26.6066 53.2131 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0048 print "peak=",int(peak_flux*1000)/1000 ! peak= 2.332 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.664 x 8.896 at 1.263 degrees (North through East) ! Clean map min=-0.012257 max=2.3329 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0339-0146_S_1994_08_12_yyk\_map.gif/gif" ! Attempting to open device: 'J0339-0146_S_1994_08_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0339-0146_S_1994_08_12_yyk_uvs.log closed on Sun Jan 7 16:04:53 2007