! Started logfile: J0336-1302_X_1997_05_07_yyk_uvs.log on Mon Jan 8 02:44:30 2007 obs J0336-1302_X_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J0336-1302_X_1997_05_07_yyk_uva.fits ! AN table 1: 149 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.804623 visibilities/baseline/integration-bin. ! Found source: J0336-1302 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 613 lines of history. ! ! Reading 21580 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0336-1302_X_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.400438 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6601 mas, bmaj=1.895 mas, bpa=-3.502 degrees ! Estimated noise=1570.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.272201 Jy ! Component: 100 - total flux cleaned = 0.329065 Jy ! Total flux subtracted in 100 components = 0.329065 Jy ! Clean residual min=-0.016415 max=0.025669 Jy/beam ! Clean residual mean=0.000179 rms=0.004177 Jy/beam ! Combined flux in latest and established models = 0.329065 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.329065 Jy ! ! Correcting IF 1. ! A total of 175 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 175 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 175 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.219377Jy sigma=0.001314 ! Fit after self-cal, rms=0.219266Jy sigma=0.001313 ! Inverting map and beam ! Estimated beam: bmin=0.6601 mas, bmaj=1.895 mas, bpa=-3.502 degrees ! Estimated noise=1570.54 mJy/beam. ! Added new window around map position (-1, -2.2). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.019451 Jy ! Component: 100 - total flux cleaned = 0.0281723 Jy ! Total flux subtracted in 100 components = 0.0281723 Jy ! Clean residual min=-0.011986 max=0.018490 Jy/beam ! Clean residual mean=0.000118 rms=0.003287 Jy/beam ! Combined flux in latest and established models = 0.357238 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 28 components and 0.357238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216486Jy sigma=0.001292 ! Fit after self-cal, rms=0.216430Jy sigma=0.001291 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9094 mas, bmaj=2.482 mas, bpa=-5.266 degrees ! Estimated noise=743.225 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185817 Jy ! Component: 100 - total flux cleaned = 0.0223396 Jy ! Component: 150 - total flux cleaned = 0.0233005 Jy ! Component: 200 - total flux cleaned = 0.0236353 Jy ! Total flux subtracted in 200 components = 0.0236353 Jy ! Clean residual min=-0.007125 max=0.011034 Jy/beam ! Clean residual mean=0.000102 rms=0.002281 Jy/beam ! Combined flux in latest and established models = 0.380873 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.380873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215917Jy sigma=0.001284 ! Fit after self-cal, rms=0.215894Jy sigma=0.001284 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9094 x 2.482 at -5.266 degrees (North through East) ! Clean map min=-0.0066953 max=0.32899 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01594 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.95 KP 1.00 ! LA 1.00 MK 1.01 NL 1.08 OV 1.01 ! PT 0.93 SC 0.87 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00722 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 0.97 KP 1.00 ! LA 0.98 MK 1.00 NL 1.10 OV 1.06 ! PT 0.91 SC 0.95 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.998839 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 0.93 KP 1.01 ! LA 0.99 MK 1.00 NL 1.10 OV 1.03 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.980568 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.02 KP 1.00 ! LA 1.00 MK 1.01 NL 1.12 OV 1.03 ! PT 0.99 SC 1.00 ! ! ! Fit before self-cal, rms=0.215894Jy sigma=0.001284 ! Fit after self-cal, rms=0.218092Jy sigma=0.001278 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218092Jy sigma=0.001278 ! Fit after self-cal, rms=0.218098Jy sigma=0.001278 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9006 mas, bmaj=2.447 mas, bpa=-4.363 degrees ! Estimated noise=739.738 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.4, 1.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00832901 Jy ! Component: 100 - total flux cleaned = 0.0092514 Jy ! Component: 150 - total flux cleaned = 0.00912014 Jy ! Component: 200 - total flux cleaned = 0.00900004 Jy ! Total flux subtracted in 200 components = 0.00900004 Jy ! Clean residual min=-0.004274 max=0.005242 Jy/beam ! Clean residual mean=-0.000059 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 0.389873 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 59 components and 0.389873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217664Jy sigma=0.001275 ! Fit after self-cal, rms=0.217607Jy sigma=0.001275 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217607Jy sigma=0.001275 ! Fit after self-cal, rms=0.209649Jy sigma=0.001223 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00361607 Jy ! Component: 100 - total flux cleaned = 0.00345331 Jy ! Component: 150 - total flux cleaned = 0.00318806 Jy ! Component: 200 - total flux cleaned = 0.00283706 Jy ! Total flux subtracted in 200 components = 0.00283706 Jy ! Clean residual min=-0.003933 max=0.004057 Jy/beam ! Clean residual mean=-0.000074 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.39271 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 70 components and 0.39271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209553Jy sigma=0.001221 ! Fit after self-cal, rms=0.208569Jy sigma=0.001215 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9006 x 2.447 at -4.363 degrees (North through East) ! Clean map min=-0.0077426 max=0.3348 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208569Jy sigma=0.001215 ! Fit after self-cal, rms=0.721735Jy sigma=0.001209 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.721735Jy sigma=0.001209 ! Fit after self-cal, rms=0.721718Jy sigma=0.001207 ! Inverting map and beam ! Estimated beam: bmin=0.8979 mas, bmaj=2.446 mas, bpa=-4.209 degrees ! Estimated noise=734.507 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176512 Jy ! Component: 100 - total flux cleaned = 0.00201332 Jy ! Component: 150 - total flux cleaned = 0.00201373 Jy ! Component: 200 - total flux cleaned = 0.00201128 Jy ! Total flux subtracted in 200 components = 0.00201128 Jy ! Clean residual min=-0.003476 max=0.002989 Jy/beam ! Clean residual mean=0.000019 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.394721 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 84 components and 0.394721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.721705Jy sigma=0.001207 ! Fit after self-cal, rms=0.721755Jy sigma=0.001206 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.721755Jy sigma=0.001206 ! Fit after self-cal, rms=0.729908Jy sigma=0.001205 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.729908Jy sigma=0.001205 ! Fit after self-cal, rms=0.729915Jy sigma=0.001205 ! Inverting map and beam ! Estimated beam: bmin=0.8963 mas, bmaj=2.437 mas, bpa=-4.059 degrees ! Estimated noise=733.024 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000718656 Jy ! Component: 100 - total flux cleaned = 0.000718648 Jy ! Component: 150 - total flux cleaned = 0.000485779 Jy ! Component: 200 - total flux cleaned = 0.000349674 Jy ! Total flux subtracted in 200 components = 0.000349674 Jy ! Clean residual min=-0.003203 max=0.002859 Jy/beam ! Clean residual mean=0.000028 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.395071 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 86 components and 0.395071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.729909Jy sigma=0.001204 ! Fit after self-cal, rms=0.729991Jy sigma=0.001204 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.407 mas, bmaj=4.551 mas, bpa=8.265 degrees ! Estimated noise=939.216 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000478968 Jy ! Component: 100 - total flux cleaned = 0.000256857 Jy ! Component: 150 - total flux cleaned = 0.000163492 Jy ! Component: 200 - total flux cleaned = 0.000164537 Jy ! Total flux subtracted in 200 components = 0.000164537 Jy ! Clean residual min=-0.003114 max=0.002408 Jy/beam ! Clean residual mean=0.000054 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 0.395236 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 96 components and 0.395236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.729983Jy sigma=0.001204 ! Fit after self-cal, rms=0.730156Jy sigma=0.001204 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6542 mas, bmaj=2.027 mas, bpa=-4.627 degrees ! Estimated noise=1619.82 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.284752 Jy ! Component: 100 - total flux cleaned = 0.336785 Jy ! Component: 150 - total flux cleaned = 0.358336 Jy ! Component: 200 - total flux cleaned = 0.371304 Jy ! Total flux subtracted in 200 components = 0.371304 Jy ! Clean residual min=-0.007272 max=0.008108 Jy/beam ! Clean residual mean=0.000083 rms=0.001825 Jy/beam ! Combined flux in latest and established models = 0.371304 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.371304 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8963 mas, bmaj=2.437 mas, bpa=-4.059 degrees ! Estimated noise=733.024 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 0.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118163 Jy ! Component: 100 - total flux cleaned = 0.0176905 Jy ! Component: 150 - total flux cleaned = 0.0195239 Jy ! Component: 200 - total flux cleaned = 0.0201024 Jy ! Total flux subtracted in 200 components = 0.0201024 Jy ! Clean residual min=-0.003181 max=0.003164 Jy/beam ! Clean residual mean=0.000046 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.391407 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 75 components and 0.391407 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.407 mas, bmaj=4.551 mas, bpa=8.265 degrees ! Estimated noise=939.216 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178202 Jy ! Component: 100 - total flux cleaned = 0.00245928 Jy ! Component: 150 - total flux cleaned = 0.0029057 Jy ! Component: 200 - total flux cleaned = 0.00321458 Jy ! Total flux subtracted in 200 components = 0.00321458 Jy ! Clean residual min=-0.002814 max=0.002389 Jy/beam ! Clean residual mean=0.000060 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.394621 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 98 components and 0.394621 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8963 mas, bmaj=2.437 mas, bpa=-4.059 degrees ! Estimated noise=733.024 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00129163 Jy ! Component: 100 - total flux cleaned = -0.00109444 Jy ! Component: 150 - total flux cleaned = -0.000928762 Jy ! Component: 200 - total flux cleaned = -0.000830938 Jy ! Total flux subtracted in 200 components = -0.000830938 Jy ! Clean residual min=-0.002922 max=0.002715 Jy/beam ! Clean residual mean=0.000033 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.39379 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 123 components and 0.39379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.730112Jy sigma=0.001204 ! Fit after self-cal, rms=0.730161Jy sigma=0.001204 wmodel J0336-1302_X_1997_05_07_yyk\_map.mod ! Writing 123 model components to file: J0336-1302_X_1997_05_07_yyk_map.mod wobs J0336-1302_X_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J0336-1302_X_1997_05_07_yyk_uvs.fits wwins J0336-1302_X_1997_05_07_yyk\_map.win ! wwins: Wrote 4 windows to J0336-1302_X_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000242286 Jy ! Component: 100 - total flux cleaned = 0.00019013 Jy ! Component: 150 - total flux cleaned = 0.000553563 Jy ! Component: 200 - total flux cleaned = 0.000640331 Jy ! Component: 250 - total flux cleaned = 0.000805849 Jy ! Component: 300 - total flux cleaned = 0.000845777 Jy ! Component: 350 - total flux cleaned = 0.00100115 Jy ! Component: 400 - total flux cleaned = 0.00115013 Jy ! Component: 450 - total flux cleaned = 0.00125843 Jy ! Component: 500 - total flux cleaned = 0.00129349 Jy ! Component: 550 - total flux cleaned = 0.00129366 Jy ! Component: 600 - total flux cleaned = 0.00129408 Jy ! Component: 650 - total flux cleaned = 0.00129389 Jy ! Component: 700 - total flux cleaned = 0.00135685 Jy ! Component: 750 - total flux cleaned = 0.00138771 Jy ! Component: 800 - total flux cleaned = 0.00153873 Jy ! Component: 850 - total flux cleaned = 0.00165671 Jy ! Component: 900 - total flux cleaned = 0.00177177 Jy ! Component: 950 - total flux cleaned = 0.00180041 Jy ! Component: 1000 - total flux cleaned = 0.00196854 Jy ! Component: 1050 - total flux cleaned = 0.00207834 Jy ! Component: 1100 - total flux cleaned = 0.00218614 Jy ! Component: 1150 - total flux cleaned = 0.00231878 Jy ! Component: 1200 - total flux cleaned = 0.00237054 Jy ! Component: 1250 - total flux cleaned = 0.00247275 Jy ! Component: 1300 - total flux cleaned = 0.00244729 Jy ! Component: 1350 - total flux cleaned = 0.00254714 Jy ! Component: 1400 - total flux cleaned = 0.00254704 Jy ! Component: 1450 - total flux cleaned = 0.00257143 Jy ! Component: 1500 - total flux cleaned = 0.00261927 Jy ! Component: 1550 - total flux cleaned = 0.00264275 Jy ! Component: 1600 - total flux cleaned = 0.00261926 Jy ! Component: 1650 - total flux cleaned = 0.00261979 Jy ! Component: 1700 - total flux cleaned = 0.00259747 Jy ! Component: 1750 - total flux cleaned = 0.0026649 Jy ! Component: 1800 - total flux cleaned = 0.00257658 Jy ! Component: 1850 - total flux cleaned = 0.00262021 Jy ! Component: 1900 - total flux cleaned = 0.00257679 Jy ! Component: 1950 - total flux cleaned = 0.00255501 Jy ! Component: 2000 - total flux cleaned = 0.00251306 Jy ! Total flux subtracted in 2048 components = 0.00253378 Jy ! Clean residual min=-0.001219 max=0.001202 Jy/beam ! Clean residual mean=-0.000001 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.396324 Jy keep ! Adding 128 model components to the UV plane model. ! The established model now contains 251 components and 0.396324 Jy ![Exited script file: muppet] wmap "J0336-1302_X_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8963 x 2.437 at -4.059 degrees (North through East) ! Clean map min=-0.0027558 max=0.3366 Jy/beam ! Writing clean map to FITS file: J0336-1302_X_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.336596 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00038315 device "J0336-1302_X_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J0336-1302_X_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.341492 0.341492 0.682985 1.36597 2.73194 5.46388 10.9278 21.8555 43.711 87.422 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.336 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8963 x 2.437 at -4.059 degrees (North through East) ! Clean map min=-0.0027558 max=0.3366 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0336-1302_X_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J0336-1302_X_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0336-1302_X_1997_05_07_yyk_uvs.log closed on Mon Jan 8 02:44:40 2007