! Started logfile: J0329-2357_S_1997_08_27_yyk_uvs.log on Sun Jan 7 16:03:26 2007 obs J0329-2357_S_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J0329-2357_S_1997_08_27_yyk_uva.fits ! AN table 1: 148 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.979279 visibilities/baseline/integration-bin. ! Found source: J0329-2357 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 702 lines of history. ! ! Reading 26088 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0329-2357_S_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.600901 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.694 mas, bmaj=6.658 mas, bpa=-12.07 degrees ! Estimated noise=2093.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.392833 Jy ! Component: 100 - total flux cleaned = 0.498375 Jy ! Total flux subtracted in 100 components = 0.498375 Jy ! Clean residual min=-0.036278 max=0.038076 Jy/beam ! Clean residual mean=0.000081 rms=0.008726 Jy/beam ! Combined flux in latest and established models = 0.498375 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.498375 Jy ! ! Correcting IF 1. ! A total of 173 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.371187Jy sigma=0.001293 ! Fit after self-cal, rms=0.370823Jy sigma=0.001291 ! Inverting map and beam ! Estimated beam: bmin=2.694 mas, bmaj=6.658 mas, bpa=-12.07 degrees ! Estimated noise=2093.26 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.361 mas, bmaj=8.02 mas, bpa=-11.77 degrees ! Estimated noise=1197.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168125 Jy ! Component: 100 - total flux cleaned = 0.0197528 Jy ! Component: 150 - total flux cleaned = 0.0197771 Jy ! Component: 200 - total flux cleaned = 0.0191843 Jy ! Total flux subtracted in 200 components = 0.0191843 Jy ! Clean residual min=-0.021376 max=0.019266 Jy/beam ! Clean residual mean=0.000115 rms=0.005189 Jy/beam ! Combined flux in latest and established models = 0.517559 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 23 components and 0.517559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.367159Jy sigma=0.001278 ! Fit after self-cal, rms=0.367022Jy sigma=0.001277 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.361 x 8.02 at -11.77 degrees (North through East) ! Clean map min=-0.016016 max=0.4201 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02542 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.11 HN 0.91 KP 0.93 ! LA 1.00 MK 0.93 NL 1.00* OV 1.10 ! PT 0.99 SC 0.83 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.992633 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.15 HN 1.01 KP 0.95 ! LA 1.10 MK 1.02 NL 0.95 OV 1.05 ! PT 0.97 SC 0.91 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.05867 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.06 HN 0.93 KP 0.93 ! LA 0.80 MK 0.81 NL 0.91 OV 0.95 ! PT 1.15 SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01915 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.13 HN 1.13 KP 0.94 ! LA 0.89 MK 0.91 NL 0.99 OV 0.96 ! PT 0.94 SC 0.97 ! ! ! Fit before self-cal, rms=0.367022Jy sigma=0.001277 ! Fit after self-cal, rms=0.352968Jy sigma=0.001264 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.352968Jy sigma=0.001264 ! Fit after self-cal, rms=0.352964Jy sigma=0.001264 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.215 mas, bmaj=7.656 mas, bpa=-11.89 degrees ! Estimated noise=1206 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0220021 Jy ! Component: 100 - total flux cleaned = 0.0234906 Jy ! Component: 150 - total flux cleaned = 0.0235255 Jy ! Component: 200 - total flux cleaned = 0.0235304 Jy ! Total flux subtracted in 200 components = 0.0235304 Jy ! Clean residual min=-0.017783 max=0.016236 Jy/beam ! Clean residual mean=-0.000037 rms=0.004273 Jy/beam ! Combined flux in latest and established models = 0.541089 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 33 components and 0.541089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.351757Jy sigma=0.001260 ! Fit after self-cal, rms=0.351731Jy sigma=0.001260 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.351731Jy sigma=0.001260 ! Fit after self-cal, rms=0.350248Jy sigma=0.001254 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000607279 Jy ! Component: 100 - total flux cleaned = 0.000627863 Jy ! Component: 150 - total flux cleaned = 0.000620121 Jy ! Component: 200 - total flux cleaned = 0.000605799 Jy ! Total flux subtracted in 200 components = 0.000605799 Jy ! Clean residual min=-0.015228 max=0.014774 Jy/beam ! Clean residual mean=-0.000038 rms=0.003985 Jy/beam ! Combined flux in latest and established models = 0.541695 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.541695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349782Jy sigma=0.001253 ! Fit after self-cal, rms=0.349453Jy sigma=0.001251 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.215 x 7.656 at -11.89 degrees (North through East) ! Clean map min=-0.014019 max=0.42506 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349453Jy sigma=0.001251 ! Fit after self-cal, rms=0.580299Jy sigma=0.001239 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.580299Jy sigma=0.001239 ! Fit after self-cal, rms=0.580234Jy sigma=0.001239 ! Inverting map and beam ! Estimated beam: bmin=3.271 mas, bmaj=9.259 mas, bpa=-4.439 degrees ! Estimated noise=1241.37 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00115913 Jy ! Component: 100 - total flux cleaned = -0.000696724 Jy ! Component: 150 - total flux cleaned = 6.71191e-05 Jy ! Component: 200 - total flux cleaned = 0.000399452 Jy ! Total flux subtracted in 200 components = 0.000399452 Jy ! Clean residual min=-0.010340 max=0.009695 Jy/beam ! Clean residual mean=-0.000053 rms=0.002650 Jy/beam ! Combined flux in latest and established models = 0.542095 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.542095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.579909Jy sigma=0.001236 ! Fit after self-cal, rms=0.579839Jy sigma=0.001236 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.579839Jy sigma=0.001236 ! Fit after self-cal, rms=0.663918Jy sigma=0.001234 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.663918Jy sigma=0.001234 ! Fit after self-cal, rms=0.663911Jy sigma=0.001234 ! Inverting map and beam ! Estimated beam: bmin=3.267 mas, bmaj=9.34 mas, bpa=-4.158 degrees ! Estimated noise=1238.49 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -1.82129e-05 Jy ! Component: 100 - total flux cleaned = 0.000316324 Jy ! Component: 150 - total flux cleaned = 0.000605896 Jy ! Component: 200 - total flux cleaned = 0.00111094 Jy ! Total flux subtracted in 200 components = 0.00111094 Jy ! Clean residual min=-0.009455 max=0.008488 Jy/beam ! Clean residual mean=-0.000057 rms=0.002343 Jy/beam ! Combined flux in latest and established models = 0.543206 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.543206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.663777Jy sigma=0.001233 ! Fit after self-cal, rms=0.663780Jy sigma=0.001233 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.888 mas, bmaj=17.61 mas, bpa=-0.4276 degrees ! Estimated noise=1578.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00308571 Jy ! Component: 100 - total flux cleaned = 0.00307594 Jy ! Component: 150 - total flux cleaned = 0.00307004 Jy ! Component: 200 - total flux cleaned = 0.00306476 Jy ! Total flux subtracted in 200 components = 0.00306476 Jy ! Clean residual min=-0.009315 max=0.006850 Jy/beam ! Clean residual mean=-0.000147 rms=0.002529 Jy/beam ! Combined flux in latest and established models = 0.54627 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 55 components and 0.54627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.663745Jy sigma=0.001233 ! Fit after self-cal, rms=0.663750Jy sigma=0.001232 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.754 mas, bmaj=7.518 mas, bpa=-4.662 degrees ! Estimated noise=2285.48 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.400001 Jy ! Component: 100 - total flux cleaned = 0.486773 Jy ! Component: 150 - total flux cleaned = 0.524121 Jy ! Component: 200 - total flux cleaned = 0.537155 Jy ! Total flux subtracted in 200 components = 0.537155 Jy ! Clean residual min=-0.015238 max=0.015813 Jy/beam ! Clean residual mean=-0.000010 rms=0.003895 Jy/beam ! Combined flux in latest and established models = 0.537155 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.537155 Jy ! Inverting map and beam ! Estimated beam: bmin=3.267 mas, bmaj=9.34 mas, bpa=-4.158 degrees ! Estimated noise=1238.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00741777 Jy ! Component: 100 - total flux cleaned = 0.00909325 Jy ! Component: 150 - total flux cleaned = 0.0100812 Jy ! Component: 200 - total flux cleaned = 0.0109065 Jy ! Total flux subtracted in 200 components = 0.0109065 Jy ! Clean residual min=-0.007098 max=0.006884 Jy/beam ! Clean residual mean=-0.000080 rms=0.001921 Jy/beam ! Combined flux in latest and established models = 0.548062 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 46 components and 0.548062 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.888 mas, bmaj=17.61 mas, bpa=-0.4276 degrees ! Estimated noise=1578.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105361 Jy ! Component: 100 - total flux cleaned = 0.00106794 Jy ! Component: 150 - total flux cleaned = 0.000955032 Jy ! Component: 200 - total flux cleaned = 0.000751263 Jy ! Total flux subtracted in 200 components = 0.000751263 Jy ! Clean residual min=-0.008495 max=0.006563 Jy/beam ! Clean residual mean=-0.000178 rms=0.002381 Jy/beam ! Combined flux in latest and established models = 0.548813 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 66 components and 0.548813 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.267 mas, bmaj=9.34 mas, bpa=-4.158 degrees ! Estimated noise=1238.49 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000487405 Jy ! Component: 100 - total flux cleaned = -0.000478928 Jy ! Component: 150 - total flux cleaned = -0.000812649 Jy ! Component: 200 - total flux cleaned = -0.000815394 Jy ! Total flux subtracted in 200 components = -0.000815394 Jy ! Clean residual min=-0.007103 max=0.006610 Jy/beam ! Clean residual mean=-0.000088 rms=0.001804 Jy/beam ! Combined flux in latest and established models = 0.547997 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 83 components and 0.547998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.665936Jy sigma=0.001232 ! Fit after self-cal, rms=0.665153Jy sigma=0.001231 wmodel J0329-2357_S_1997_08_27_yyk\_map.mod ! Writing 83 model components to file: J0329-2357_S_1997_08_27_yyk_map.mod wobs J0329-2357_S_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J0329-2357_S_1997_08_27_yyk_uvs.fits wwins J0329-2357_S_1997_08_27_yyk\_map.win ! wwins: Wrote 2 windows to J0329-2357_S_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00160409 Jy ! Component: 100 - total flux cleaned = -0.00117864 Jy ! Component: 150 - total flux cleaned = -0.000270158 Jy ! Component: 200 - total flux cleaned = 0.000589971 Jy ! Component: 250 - total flux cleaned = 0.0012216 Jy ! Component: 300 - total flux cleaned = 0.0019096 Jy ! Component: 350 - total flux cleaned = 0.00248312 Jy ! Component: 400 - total flux cleaned = 0.00287599 Jy ! Component: 450 - total flux cleaned = 0.00295141 Jy ! Component: 500 - total flux cleaned = 0.00302394 Jy ! Component: 550 - total flux cleaned = 0.00288295 Jy ! Component: 600 - total flux cleaned = 0.00288267 Jy ! Component: 650 - total flux cleaned = 0.00294804 Jy ! Component: 700 - total flux cleaned = 0.00281997 Jy ! Component: 750 - total flux cleaned = 0.0026965 Jy ! Component: 800 - total flux cleaned = 0.00251622 Jy ! Component: 850 - total flux cleaned = 0.00251734 Jy ! Component: 900 - total flux cleaned = 0.00240175 Jy ! Component: 950 - total flux cleaned = 0.00206029 Jy ! Component: 1000 - total flux cleaned = 0.00200565 Jy ! Component: 1050 - total flux cleaned = 0.00178691 Jy ! Component: 1100 - total flux cleaned = 0.00151954 Jy ! Component: 1150 - total flux cleaned = 0.00136158 Jy ! Component: 1200 - total flux cleaned = 0.00110285 Jy ! Component: 1250 - total flux cleaned = 0.000899508 Jy ! Component: 1300 - total flux cleaned = 0.000749094 Jy ! Component: 1350 - total flux cleaned = 0.000503701 Jy ! Component: 1400 - total flux cleaned = 0.000407422 Jy ! Component: 1450 - total flux cleaned = 0.00031213 Jy ! Component: 1500 - total flux cleaned = 0.000172496 Jy ! Component: 1550 - total flux cleaned = 0.000126271 Jy ! Component: 1600 - total flux cleaned = -1.05533e-05 Jy ! Component: 1650 - total flux cleaned = -0.000235029 Jy ! Component: 1700 - total flux cleaned = -0.000278701 Jy ! Component: 1750 - total flux cleaned = -0.00036598 Jy ! Component: 1800 - total flux cleaned = -0.000538439 Jy ! Component: 1850 - total flux cleaned = -0.000665872 Jy ! Component: 1900 - total flux cleaned = -0.000792243 Jy ! Component: 1950 - total flux cleaned = -0.000916739 Jy ! Component: 2000 - total flux cleaned = -0.000999258 Jy ! Total flux subtracted in 2048 components = -0.00128233 Jy ! Clean residual min=-0.002433 max=0.002561 Jy/beam ! Clean residual mean=-0.000033 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.546715 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 227 components and 0.546715 Jy ![Exited script file: muppet] wmap "J0329-2357_S_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.267 x 9.34 at -4.158 degrees (North through East) ! Clean map min=-0.0044826 max=0.46727 Jy/beam ! Writing clean map to FITS file: J0329-2357_S_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.467275 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000812493 device "J0329-2357_S_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J0329-2357_S_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.521637 0.521637 1.04327 2.08655 4.1731 8.34619 16.6924 33.3848 66.7696 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.467 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.267 x 9.34 at -4.158 degrees (North through East) ! Clean map min=-0.0044826 max=0.46727 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0329-2357_S_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J0329-2357_S_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0329-2357_S_1997_08_27_yyk_uvs.log closed on Sun Jan 7 16:03:33 2007