! Started logfile: J0327-2202_S_1997_07_02_yyk_uvs.log on Sun Jan 7 16:02:54 2007 obs J0327-2202_S_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J0327-2202_S_1997_07_02_yyk_uva.fits ! AN table 1: 147 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1.19592 visibilities/baseline/integration-bin. ! Found source: J0327-2202 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 754 lines of history. ! ! Reading 31644 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0327-2202_S_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.712938 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3 mas, bmaj=8.422 mas, bpa=-1.706 degrees ! Estimated noise=1445.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.534386 Jy ! Component: 100 - total flux cleaned = 0.61809 Jy ! Total flux subtracted in 100 components = 0.61809 Jy ! Clean residual min=-0.016596 max=0.027712 Jy/beam ! Clean residual mean=0.000326 rms=0.005358 Jy/beam ! Combined flux in latest and established models = 0.618089 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.618089 Jy ! ! Correcting IF 1. ! A total of 270 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.339175Jy sigma=0.001464 ! Fit after self-cal, rms=0.339083Jy sigma=0.001464 ! Inverting map and beam ! Estimated beam: bmin=3 mas, bmaj=8.422 mas, bpa=-1.705 degrees ! Estimated noise=1445.89 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.819 mas, bmaj=10.79 mas, bpa=-2.698 degrees ! Estimated noise=1054.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0173459 Jy ! Component: 100 - total flux cleaned = 0.0176587 Jy ! Component: 150 - total flux cleaned = 0.0176517 Jy ! Component: 200 - total flux cleaned = 0.0176557 Jy ! Total flux subtracted in 200 components = 0.0176557 Jy ! Clean residual min=-0.015677 max=0.020165 Jy/beam ! Clean residual mean=0.000417 rms=0.005602 Jy/beam ! Combined flux in latest and established models = 0.635745 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 23 components and 0.635745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.337797Jy sigma=0.001460 ! Fit after self-cal, rms=0.337773Jy sigma=0.001460 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.819 x 10.79 at -2.698 degrees (North through East) ! Clean map min=-0.015467 max=0.61732 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02393 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.12 HN 0.92 KP 0.89 ! LA 0.96 MK 0.99 NL 1.00* OV 1.10 ! PT 0.95 SC 0.84 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.977218 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.16 HN 1.02 KP 0.95 ! LA 1.08 MK 1.06 NL 1.00 OV 1.06 ! PT 0.92 SC 0.94 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.03601 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.07 HN 0.97 KP 0.91 ! LA 0.82 MK 0.92 NL 0.94 OV 0.95 ! PT 1.09 SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.990582 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.11 HN 1.14 KP 0.93 ! LA 0.89 MK 1.06 NL 1.09 OV 0.94 ! PT 0.90 SC 1.01 ! ! ! Fit before self-cal, rms=0.337773Jy sigma=0.001460 ! Fit after self-cal, rms=0.325392Jy sigma=0.001426 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325392Jy sigma=0.001426 ! Fit after self-cal, rms=0.325393Jy sigma=0.001426 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.802 mas, bmaj=10.7 mas, bpa=-1.756 degrees ! Estimated noise=1053.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8, -1.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0184823 Jy ! Component: 100 - total flux cleaned = 0.0233174 Jy ! Component: 150 - total flux cleaned = 0.0233563 Jy ! Component: 200 - total flux cleaned = 0.0233622 Jy ! Total flux subtracted in 200 components = 0.0233622 Jy ! Clean residual min=-0.006247 max=0.008518 Jy/beam ! Clean residual mean=-0.000024 rms=0.002098 Jy/beam ! Combined flux in latest and established models = 0.659107 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 59 components and 0.659107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.324391Jy sigma=0.001422 ! Fit after self-cal, rms=0.324288Jy sigma=0.001422 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.324288Jy sigma=0.001422 ! Fit after self-cal, rms=0.322414Jy sigma=0.001412 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00487788 Jy ! Component: 100 - total flux cleaned = 0.00509073 Jy ! Component: 150 - total flux cleaned = 0.00472841 Jy ! Component: 200 - total flux cleaned = 0.00441233 Jy ! Total flux subtracted in 200 components = 0.00441233 Jy ! Clean residual min=-0.005500 max=0.006666 Jy/beam ! Clean residual mean=-0.000040 rms=0.001888 Jy/beam ! Combined flux in latest and established models = 0.66352 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 78 components and 0.66352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.322174Jy sigma=0.001411 ! Fit after self-cal, rms=0.321911Jy sigma=0.001410 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.802 x 10.7 at -1.756 degrees (North through East) ! Clean map min=-0.0053863 max=0.61664 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321911Jy sigma=0.001410 ! Fit after self-cal, rms=0.318494Jy sigma=0.001402 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318494Jy sigma=0.001402 ! Fit after self-cal, rms=0.318432Jy sigma=0.001402 ! Inverting map and beam ! Estimated beam: bmin=3.8 mas, bmaj=10.71 mas, bpa=-1.978 degrees ! Estimated noise=1049.54 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00530209 Jy ! Component: 100 - total flux cleaned = 0.00584564 Jy ! Component: 150 - total flux cleaned = 0.00564625 Jy ! Component: 200 - total flux cleaned = 0.00555189 Jy ! Total flux subtracted in 200 components = 0.00555189 Jy ! Clean residual min=-0.005068 max=0.005795 Jy/beam ! Clean residual mean=-0.000035 rms=0.001553 Jy/beam ! Combined flux in latest and established models = 0.669071 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 97 components and 0.669071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318323Jy sigma=0.001401 ! Fit after self-cal, rms=0.318295Jy sigma=0.001401 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318295Jy sigma=0.001401 ! Fit after self-cal, rms=0.318208Jy sigma=0.001399 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318208Jy sigma=0.001399 ! Fit after self-cal, rms=0.318204Jy sigma=0.001399 ! Inverting map and beam ! Estimated beam: bmin=3.797 mas, bmaj=10.7 mas, bpa=-1.955 degrees ! Estimated noise=1049.64 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238279 Jy ! Component: 100 - total flux cleaned = 0.00256098 Jy ! Component: 150 - total flux cleaned = 0.00256721 Jy ! Component: 200 - total flux cleaned = 0.0025691 Jy ! Total flux subtracted in 200 components = 0.0025691 Jy ! Clean residual min=-0.004917 max=0.005697 Jy/beam ! Clean residual mean=-0.000037 rms=0.001486 Jy/beam ! Combined flux in latest and established models = 0.67164 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 108 components and 0.67164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318156Jy sigma=0.001399 ! Fit after self-cal, rms=0.318150Jy sigma=0.001399 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.296 mas, bmaj=18.01 mas, bpa=-3.866 degrees ! Estimated noise=1267.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014895 Jy ! Component: 100 - total flux cleaned = 0.00142865 Jy ! Component: 150 - total flux cleaned = 0.00138139 Jy ! Component: 200 - total flux cleaned = 0.00138062 Jy ! Total flux subtracted in 200 components = 0.00138062 Jy ! Clean residual min=-0.005216 max=0.007477 Jy/beam ! Clean residual mean=-0.000068 rms=0.001916 Jy/beam ! Combined flux in latest and established models = 0.673021 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 124 components and 0.673021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318150Jy sigma=0.001399 ! Fit after self-cal, rms=0.318148Jy sigma=0.001399 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.007 mas, bmaj=8.424 mas, bpa=-1.21 degrees ! Estimated noise=1429.52 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.529539 Jy ! Component: 100 - total flux cleaned = 0.609759 Jy ! Component: 150 - total flux cleaned = 0.639672 Jy ! Component: 200 - total flux cleaned = 0.65756 Jy ! Total flux subtracted in 200 components = 0.65756 Jy ! Clean residual min=-0.007762 max=0.008648 Jy/beam ! Clean residual mean=0.000028 rms=0.002211 Jy/beam ! Combined flux in latest and established models = 0.65756 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.65756 Jy ! Inverting map and beam ! Estimated beam: bmin=3.797 mas, bmaj=10.7 mas, bpa=-1.955 degrees ! Estimated noise=1049.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116901 Jy ! Component: 100 - total flux cleaned = 0.0138137 Jy ! Component: 150 - total flux cleaned = 0.0145191 Jy ! Component: 200 - total flux cleaned = 0.0149109 Jy ! Total flux subtracted in 200 components = 0.0149109 Jy ! Clean residual min=-0.005436 max=0.006252 Jy/beam ! Clean residual mean=-0.000035 rms=0.001681 Jy/beam ! Combined flux in latest and established models = 0.672471 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 50 components and 0.672471 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.296 mas, bmaj=18.01 mas, bpa=-3.866 degrees ! Estimated noise=1267.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130943 Jy ! Component: 100 - total flux cleaned = 0.00144059 Jy ! Component: 150 - total flux cleaned = 0.00144141 Jy ! Component: 200 - total flux cleaned = 0.00152824 Jy ! Total flux subtracted in 200 components = 0.00152824 Jy ! Clean residual min=-0.005668 max=0.008037 Jy/beam ! Clean residual mean=-0.000069 rms=0.001997 Jy/beam ! Combined flux in latest and established models = 0.673999 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 74 components and 0.673999 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.797 mas, bmaj=10.7 mas, bpa=-1.955 degrees ! Estimated noise=1049.64 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -6.92494e-05 Jy ! Component: 100 - total flux cleaned = -6.78007e-05 Jy ! Component: 150 - total flux cleaned = -0.000177387 Jy ! Component: 200 - total flux cleaned = -0.000381343 Jy ! Total flux subtracted in 200 components = -0.000381343 Jy ! Clean residual min=-0.005000 max=0.005988 Jy/beam ! Clean residual mean=-0.000039 rms=0.001539 Jy/beam ! Combined flux in latest and established models = 0.673618 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 93 components and 0.673618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318238Jy sigma=0.001399 ! Fit after self-cal, rms=0.318229Jy sigma=0.001399 wmodel J0327-2202_S_1997_07_02_yyk\_map.mod ! Writing 93 model components to file: J0327-2202_S_1997_07_02_yyk_map.mod wobs J0327-2202_S_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J0327-2202_S_1997_07_02_yyk_uvs.fits wwins J0327-2202_S_1997_07_02_yyk\_map.win ! wwins: Wrote 2 windows to J0327-2202_S_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189694 Jy ! Component: 100 - total flux cleaned = 0.00278508 Jy ! Component: 150 - total flux cleaned = 0.00342997 Jy ! Component: 200 - total flux cleaned = 0.00441348 Jy ! Component: 250 - total flux cleaned = 0.00462751 Jy ! Component: 300 - total flux cleaned = 0.00455854 Jy ! Component: 350 - total flux cleaned = 0.00482242 Jy ! Component: 400 - total flux cleaned = 0.00494974 Jy ! Component: 450 - total flux cleaned = 0.00507388 Jy ! Component: 500 - total flux cleaned = 0.00519529 Jy ! Component: 550 - total flux cleaned = 0.0053692 Jy ! Component: 600 - total flux cleaned = 0.00531233 Jy ! Component: 650 - total flux cleaned = 0.00531244 Jy ! Component: 700 - total flux cleaned = 0.0052595 Jy ! Component: 750 - total flux cleaned = 0.00526021 Jy ! Component: 800 - total flux cleaned = 0.00531113 Jy ! Component: 850 - total flux cleaned = 0.00521202 Jy ! Component: 900 - total flux cleaned = 0.00521247 Jy ! Component: 950 - total flux cleaned = 0.00516531 Jy ! Component: 1000 - total flux cleaned = 0.00511883 Jy ! Component: 1050 - total flux cleaned = 0.00521137 Jy ! Component: 1100 - total flux cleaned = 0.00521166 Jy ! Component: 1150 - total flux cleaned = 0.00516658 Jy ! Component: 1200 - total flux cleaned = 0.00512219 Jy ! Component: 1250 - total flux cleaned = 0.00503543 Jy ! Component: 1300 - total flux cleaned = 0.00495107 Jy ! Component: 1350 - total flux cleaned = 0.00495154 Jy ! Component: 1400 - total flux cleaned = 0.00478833 Jy ! Component: 1450 - total flux cleaned = 0.00466833 Jy ! Component: 1500 - total flux cleaned = 0.00458968 Jy ! Component: 1550 - total flux cleaned = 0.00443462 Jy ! Component: 1600 - total flux cleaned = 0.00428241 Jy ! Component: 1650 - total flux cleaned = 0.0043957 Jy ! Component: 1700 - total flux cleaned = 0.00409756 Jy ! Component: 1750 - total flux cleaned = 0.0040252 Jy ! Component: 1800 - total flux cleaned = 0.00409814 Jy ! Component: 1850 - total flux cleaned = 0.00399096 Jy ! Component: 1900 - total flux cleaned = 0.00399084 Jy ! Component: 1950 - total flux cleaned = 0.00402583 Jy ! Component: 2000 - total flux cleaned = 0.0039578 Jy ! Total flux subtracted in 2048 components = 0.00395763 Jy ! Clean residual min=-0.001958 max=0.002996 Jy/beam ! Clean residual mean=-0.000025 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.677575 Jy keep ! Adding 158 model components to the UV plane model. ! The established model now contains 251 components and 0.677575 Jy ![Exited script file: muppet] wmap "J0327-2202_S_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.797 x 10.7 at -1.955 degrees (North through East) ! Clean map min=-0.0038165 max=0.61377 Jy/beam ! Writing clean map to FITS file: J0327-2202_S_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.613774 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000721291 device "J0327-2202_S_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J0327-2202_S_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.352552 0.352552 0.705105 1.41021 2.82042 5.64084 11.2817 22.5634 45.1267 90.2534 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.613 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.797 x 10.7 at -1.955 degrees (North through East) ! Clean map min=-0.0038165 max=0.61377 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0327-2202_S_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J0327-2202_S_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0327-2202_S_1997_07_02_yyk_uvs.log closed on Sun Jan 7 16:03:02 2007