! Started logfile: J0252-2219_S_1997_07_02_yyk_uvs.log on Sun Jan 7 15:56:51 2007 obs J0252-2219_S_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J0252-2219_S_1997_07_02_yyk_uva.fits ! AN table 1: 142 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1.62144 visibilities/baseline/integration-bin. ! Found source: J0252-2219 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 754 lines of history. ! ! Reading 41444 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0252-2219_S_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.477182 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.731 mas, bmaj=8.242 mas, bpa=1.647 degrees ! Estimated noise=1791.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.280117 Jy ! Component: 100 - total flux cleaned = 0.344276 Jy ! Total flux subtracted in 100 components = 0.344276 Jy ! Clean residual min=-0.013471 max=0.023539 Jy/beam ! Clean residual mean=0.000317 rms=0.004224 Jy/beam ! Combined flux in latest and established models = 0.344276 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.344276 Jy ! ! Correcting IF 1. ! A total of 353 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.332215Jy sigma=0.001709 ! Fit after self-cal, rms=0.331996Jy sigma=0.001708 ! Inverting map and beam ! Estimated beam: bmin=2.731 mas, bmaj=8.242 mas, bpa=1.647 degrees ! Estimated noise=1791.52 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.77 mas, bmaj=10.73 mas, bpa=-1.433 degrees ! Estimated noise=907.954 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0261645 Jy ! Component: 100 - total flux cleaned = 0.0336145 Jy ! Component: 150 - total flux cleaned = 0.0343795 Jy ! Component: 200 - total flux cleaned = 0.034757 Jy ! Total flux subtracted in 200 components = 0.034757 Jy ! Clean residual min=-0.011677 max=0.016220 Jy/beam ! Clean residual mean=0.000258 rms=0.004070 Jy/beam ! Combined flux in latest and established models = 0.379033 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 26 components and 0.379033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.330309Jy sigma=0.001700 ! Fit after self-cal, rms=0.330290Jy sigma=0.001700 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.77 x 10.73 at -1.433 degrees (North through East) ! Clean map min=-0.011347 max=0.33603 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01719 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.14 HN 0.94 KP 0.87 ! LA 0.99 MK 1.04 NL 1.00* OV 1.09 ! PT 0.92 SC 0.81 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.975434 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.17 HN 1.05 KP 0.93 ! LA 1.10 MK 1.04 NL 0.96 OV 1.07 ! PT 0.94 SC 0.94 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.03969 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.10 HN 1.01 KP 0.92 ! LA 0.80 MK 0.87 NL 0.94 OV 0.97 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.990487 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.14 HN 1.19 KP 0.92 ! LA 0.90 MK 1.07 NL 1.03 OV 0.93 ! PT 0.89 SC 0.98 ! ! ! Fit before self-cal, rms=0.330290Jy sigma=0.001700 ! Fit after self-cal, rms=0.325499Jy sigma=0.001684 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325499Jy sigma=0.001684 ! Fit after self-cal, rms=0.325499Jy sigma=0.001684 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.752 mas, bmaj=10.6 mas, bpa=-0.3805 degrees ! Estimated noise=904.991 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276174 Jy ! Component: 100 - total flux cleaned = 0.00295255 Jy ! Component: 150 - total flux cleaned = 0.00287609 Jy ! Component: 200 - total flux cleaned = 0.00273516 Jy ! Total flux subtracted in 200 components = 0.00273516 Jy ! Clean residual min=-0.006137 max=0.006933 Jy/beam ! Clean residual mean=0.000027 rms=0.001991 Jy/beam ! Combined flux in latest and established models = 0.381769 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 33 components and 0.381769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325428Jy sigma=0.001684 ! Fit after self-cal, rms=0.325413Jy sigma=0.001684 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325413Jy sigma=0.001684 ! Fit after self-cal, rms=0.324403Jy sigma=0.001678 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00077056 Jy ! Component: 100 - total flux cleaned = 0.000709848 Jy ! Component: 150 - total flux cleaned = 0.000604972 Jy ! Component: 200 - total flux cleaned = 0.000553343 Jy ! Total flux subtracted in 200 components = 0.000553343 Jy ! Clean residual min=-0.006020 max=0.007052 Jy/beam ! Clean residual mean=0.000015 rms=0.001990 Jy/beam ! Combined flux in latest and established models = 0.382322 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 37 components and 0.382322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.324375Jy sigma=0.001678 ! Fit after self-cal, rms=0.324253Jy sigma=0.001677 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.752 x 10.6 at -0.3805 degrees (North through East) ! Clean map min=-0.0057853 max=0.3385 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.324253Jy sigma=0.001677 ! Fit after self-cal, rms=0.325152Jy sigma=0.001673 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325152Jy sigma=0.001673 ! Fit after self-cal, rms=0.325147Jy sigma=0.001673 ! Inverting map and beam ! Estimated beam: bmin=3.75 mas, bmaj=10.61 mas, bpa=-0.3608 degrees ! Estimated noise=902.893 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117275 Jy ! Component: 100 - total flux cleaned = 0.00131167 Jy ! Component: 150 - total flux cleaned = 0.00143021 Jy ! Component: 200 - total flux cleaned = 0.00150479 Jy ! Total flux subtracted in 200 components = 0.00150479 Jy ! Clean residual min=-0.005586 max=0.007011 Jy/beam ! Clean residual mean=0.000041 rms=0.001871 Jy/beam ! Combined flux in latest and established models = 0.383827 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.383827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325139Jy sigma=0.001673 ! Fit after self-cal, rms=0.325145Jy sigma=0.001673 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325145Jy sigma=0.001673 ! Fit after self-cal, rms=0.325108Jy sigma=0.001671 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325108Jy sigma=0.001671 ! Fit after self-cal, rms=0.325120Jy sigma=0.001671 ! Inverting map and beam ! Estimated beam: bmin=3.736 mas, bmaj=10.58 mas, bpa=-0.3978 degrees ! Estimated noise=902.598 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106174 Jy ! Component: 100 - total flux cleaned = 0.00114206 Jy ! Component: 150 - total flux cleaned = 0.00124938 Jy ! Component: 200 - total flux cleaned = 0.00134743 Jy ! Total flux subtracted in 200 components = 0.00134743 Jy ! Clean residual min=-0.005626 max=0.007026 Jy/beam ! Clean residual mean=0.000032 rms=0.001855 Jy/beam ! Combined flux in latest and established models = 0.385174 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.385174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325116Jy sigma=0.001671 ! Fit after self-cal, rms=0.325121Jy sigma=0.001671 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.662 mas, bmaj=19.12 mas, bpa=0.1262 degrees ! Estimated noise=1089.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000908483 Jy ! Component: 100 - total flux cleaned = 0.000915705 Jy ! Component: 150 - total flux cleaned = 0.000871142 Jy ! Component: 200 - total flux cleaned = 0.000871528 Jy ! Total flux subtracted in 200 components = 0.000871528 Jy ! Clean residual min=-0.005137 max=0.008214 Jy/beam ! Clean residual mean=0.000055 rms=0.002578 Jy/beam ! Combined flux in latest and established models = 0.386046 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 55 components and 0.386046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325153Jy sigma=0.001671 ! Fit after self-cal, rms=0.325138Jy sigma=0.001671 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.732 mas, bmaj=8.294 mas, bpa=2.84 degrees ! Estimated noise=1732.1 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.279911 Jy ! Component: 100 - total flux cleaned = 0.344583 Jy ! Component: 150 - total flux cleaned = 0.369236 Jy ! Component: 200 - total flux cleaned = 0.377832 Jy ! Total flux subtracted in 200 components = 0.377832 Jy ! Clean residual min=-0.009105 max=0.010261 Jy/beam ! Clean residual mean=0.000073 rms=0.002661 Jy/beam ! Combined flux in latest and established models = 0.377832 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.377832 Jy ! Inverting map and beam ! Estimated beam: bmin=3.736 mas, bmaj=10.58 mas, bpa=-0.3978 degrees ! Estimated noise=902.598 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00748623 Jy ! Component: 100 - total flux cleaned = 0.00780662 Jy ! Component: 150 - total flux cleaned = 0.00780819 Jy ! Component: 200 - total flux cleaned = 0.00786676 Jy ! Total flux subtracted in 200 components = 0.00786676 Jy ! Clean residual min=-0.005552 max=0.006714 Jy/beam ! Clean residual mean=0.000030 rms=0.001859 Jy/beam ! Combined flux in latest and established models = 0.385699 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.385699 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.662 mas, bmaj=19.12 mas, bpa=0.1262 degrees ! Estimated noise=1089.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000908308 Jy ! Component: 100 - total flux cleaned = 0.000838622 Jy ! Component: 150 - total flux cleaned = 0.00078996 Jy ! Component: 200 - total flux cleaned = 0.000750962 Jy ! Total flux subtracted in 200 components = 0.000750962 Jy ! Clean residual min=-0.005053 max=0.008169 Jy/beam ! Clean residual mean=0.000053 rms=0.002575 Jy/beam ! Combined flux in latest and established models = 0.38645 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 42 components and 0.38645 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.736 mas, bmaj=10.58 mas, bpa=-0.3978 degrees ! Estimated noise=902.598 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000536812 Jy ! Component: 100 - total flux cleaned = -0.000521774 Jy ! Component: 150 - total flux cleaned = -0.00046466 Jy ! Component: 200 - total flux cleaned = -0.00041596 Jy ! Total flux subtracted in 200 components = -0.00041596 Jy ! Clean residual min=-0.005479 max=0.006690 Jy/beam ! Clean residual mean=0.000030 rms=0.001839 Jy/beam ! Combined flux in latest and established models = 0.386034 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.386034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325150Jy sigma=0.001671 ! Fit after self-cal, rms=0.325148Jy sigma=0.001671 wmodel J0252-2219_S_1997_07_02_yyk\_map.mod ! Writing 50 model components to file: J0252-2219_S_1997_07_02_yyk_map.mod wobs J0252-2219_S_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J0252-2219_S_1997_07_02_yyk_uvs.fits wwins J0252-2219_S_1997_07_02_yyk\_map.win ! wwins: Wrote 1 windows to J0252-2219_S_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246712 Jy ! Component: 100 - total flux cleaned = 0.00373066 Jy ! Component: 150 - total flux cleaned = 0.0045458 Jy ! Component: 200 - total flux cleaned = 0.00488483 Jy ! Component: 250 - total flux cleaned = 0.00504425 Jy ! Component: 300 - total flux cleaned = 0.00519447 Jy ! Component: 350 - total flux cleaned = 0.00519437 Jy ! Component: 400 - total flux cleaned = 0.00560749 Jy ! Component: 450 - total flux cleaned = 0.00573765 Jy ! Component: 500 - total flux cleaned = 0.00592825 Jy ! Component: 550 - total flux cleaned = 0.00599088 Jy ! Component: 600 - total flux cleaned = 0.00617297 Jy ! Component: 650 - total flux cleaned = 0.00646713 Jy ! Component: 700 - total flux cleaned = 0.00675412 Jy ! Component: 750 - total flux cleaned = 0.00709053 Jy ! Component: 800 - total flux cleaned = 0.00719948 Jy ! Component: 850 - total flux cleaned = 0.00736017 Jy ! Component: 900 - total flux cleaned = 0.00741273 Jy ! Component: 950 - total flux cleaned = 0.00756788 Jy ! Component: 1000 - total flux cleaned = 0.00776978 Jy ! Component: 1050 - total flux cleaned = 0.00786831 Jy ! Component: 1100 - total flux cleaned = 0.00815868 Jy ! Component: 1150 - total flux cleaned = 0.0082531 Jy ! Component: 1200 - total flux cleaned = 0.00848628 Jy ! Component: 1250 - total flux cleaned = 0.00839453 Jy ! Component: 1300 - total flux cleaned = 0.00857515 Jy ! Component: 1350 - total flux cleaned = 0.00861878 Jy ! Component: 1400 - total flux cleaned = 0.00866232 Jy ! Component: 1450 - total flux cleaned = 0.00870481 Jy ! Component: 1500 - total flux cleaned = 0.00870491 Jy ! Component: 1550 - total flux cleaned = 0.00870513 Jy ! Component: 1600 - total flux cleaned = 0.00858185 Jy ! Component: 1650 - total flux cleaned = 0.00862269 Jy ! Component: 1700 - total flux cleaned = 0.00846302 Jy ! Component: 1750 - total flux cleaned = 0.00846341 Jy ! Component: 1800 - total flux cleaned = 0.00861961 Jy ! Component: 1850 - total flux cleaned = 0.0086586 Jy ! Component: 1900 - total flux cleaned = 0.00877273 Jy ! Component: 1950 - total flux cleaned = 0.00888558 Jy ! Component: 2000 - total flux cleaned = 0.00884847 Jy ! Total flux subtracted in 2048 components = 0.00895914 Jy ! Clean residual min=-0.002100 max=0.002373 Jy/beam ! Clean residual mean=-0.000012 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.394993 Jy keep ! Adding 132 model components to the UV plane model. ! The established model now contains 182 components and 0.394993 Jy ![Exited script file: muppet] wmap "J0252-2219_S_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.736 x 10.58 at -0.3978 degrees (North through East) ! Clean map min=-0.0039869 max=0.33529 Jy/beam ! Writing clean map to FITS file: J0252-2219_S_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.335293 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000772955 device "J0252-2219_S_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J0252-2219_S_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.691594 0.691594 1.38319 2.76638 5.53275 11.0655 22.131 44.262 88.524 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.335 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.736 x 10.58 at -0.3978 degrees (North through East) ! Clean map min=-0.0039869 max=0.33529 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0252-2219_S_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J0252-2219_S_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0252-2219_S_1997_07_02_yyk_uvs.log closed on Sun Jan 7 15:56:58 2007