! Started logfile: J0242-2132_S_1997_07_02_yyk_uvs.log on Sun Jan  7 15:55:28 2007
obs J0242-2132_S_1997_07_02_yyk_uva.fits
! Reading UV FITS file: J0242-2132_S_1997_07_02_yyk_uva.fits
! AN table 1: 148 integrations on 45 of 45 possible baselines.
! Apparent sampling: 1.76997 visibilities/baseline/integration-bin.
! Found source: J0242-2132
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22447e+09        8e+06          1        8e+06
!  02        2  2.23447e+09        8e+06          1        8e+06
!  03        3  2.29447e+09        8e+06          1        8e+06
!  04        4  2.32447e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 754 lines of history.
! 
! Reading 47152 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0242-2132_S_1997_07_02_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.90328 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.892 mas, bmaj=8.09 mas, bpa=3.287 degrees
! Estimated noise=1440.61 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.631781 Jy
! Component: 100  -  total flux cleaned = 0.769561 Jy
! Total flux subtracted in 100 components = 0.769561 Jy
! Clean residual min=-0.049330 max=0.106269 Jy/beam
! Clean residual mean=0.001833 rms=0.018946 Jy/beam
! Combined flux in latest and established models = 0.769562 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.769562 Jy
! 
! Correcting IF 1.
!  A total of 263 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 91 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 91 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.427363Jy  sigma=0.002369
! Fit after  self-cal, rms=0.422981Jy  sigma=0.002344
! Inverting map and beam 
! Estimated beam: bmin=2.892 mas, bmaj=8.09 mas, bpa=3.287 degrees
! Estimated noise=1440.74 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.754 mas, bmaj=10.55 mas, bpa=-0.6574 degrees
! Estimated noise=837.653 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.146609 Jy
! Component: 100  -  total flux cleaned = 0.207303 Jy
! Component: 150  -  total flux cleaned = 0.234972 Jy
! Component: 200  -  total flux cleaned = 0.24372 Jy
! Total flux subtracted in 200 components = 0.24372 Jy
! Clean residual min=-0.054411 max=0.126282 Jy/beam
! Clean residual mean=0.001949 rms=0.020674 Jy/beam
! Combined flux in latest and established models = 1.01328 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 54 components and 1.01328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.399811Jy  sigma=0.002146
! Fit after  self-cal, rms=0.399731Jy  sigma=0.002145
! Inverting map 
! Added new window around map position (-9, -4.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.1373 Jy
! Component: 100  -  total flux cleaned = 0.160279 Jy
! Component: 150  -  total flux cleaned = 0.16999 Jy
! Component: 200  -  total flux cleaned = 0.175643 Jy
! Total flux subtracted in 200 components = 0.175643 Jy
! Clean residual min=-0.051181 max=0.079434 Jy/beam
! Clean residual mean=0.001432 rms=0.013522 Jy/beam
! Combined flux in latest and established models = 1.18892 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 60 model components to the UV plane model.
! The established model now contains 112 components and 1.18892 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.365776Jy  sigma=0.001935
! Fit after  self-cal, rms=0.356903Jy  sigma=0.001883
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.754 x 10.55 at -0.6574 degrees (North through East)
! Clean map  min=-0.036568  max=0.7109 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.03009
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.07     HN        0.95     KP        0.89     
!   LA        1.01     MK        0.96     NL        1.00*    OV        1.11     
!   PT        0.90     SC        0.85     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.961584
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.12     HN        1.02     KP        0.95     
!   LA        1.11     MK        1.00     NL        1.28     OV        1.04     
!   PT        0.89     SC        0.93     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.01669
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        0.93     KP        0.92     
!   LA        0.84     MK        0.88     NL        1.21     OV        0.97     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.963188
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.09     HN        1.14     KP        0.95     
!   LA        0.94     MK        1.06     NL        1.33     OV        0.97     
!   PT        0.88     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.356903Jy  sigma=0.001883
! Fit after  self-cal, rms=0.344835Jy  sigma=0.001802
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.344835Jy  sigma=0.001802
! Fit after  self-cal, rms=0.344873Jy  sigma=0.001802
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.68 mas, bmaj=10.38 mas, bpa=0.2431 degrees
! Estimated noise=826.293 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.006804 Jy
! Component: 100  -  total flux cleaned = 0.00780974 Jy
! Component: 150  -  total flux cleaned = 0.00784155 Jy
! Component: 200  -  total flux cleaned = 0.00722809 Jy
! Total flux subtracted in 200 components = 0.00722809 Jy
! Clean residual min=-0.017616 max=0.033126 Jy/beam
! Clean residual mean=0.000717 rms=0.006670 Jy/beam
! Combined flux in latest and established models = 1.19615 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 40 model components to the UV plane model.
! The established model now contains 149 components and 1.19615 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.339270Jy  sigma=0.001770
! Fit after  self-cal, rms=0.338209Jy  sigma=0.001763
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.338209Jy  sigma=0.001763
! Fit after  self-cal, rms=0.335945Jy  sigma=0.001752
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0137842 Jy
! Component: 100  -  total flux cleaned = 0.015032 Jy
! Component: 150  -  total flux cleaned = 0.0155202 Jy
! Component: 200  -  total flux cleaned = 0.0155081 Jy
! Total flux subtracted in 200 components = 0.0155081 Jy
! Clean residual min=-0.015582 max=0.026513 Jy/beam
! Clean residual mean=0.000669 rms=0.005630 Jy/beam
! Combined flux in latest and established models = 1.21166 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 53 model components to the UV plane model.
! The established model now contains 188 components and 1.21166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.333934Jy  sigma=0.001741
! Fit after  self-cal, rms=0.333255Jy  sigma=0.001737
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.68 x 10.38 at 0.2431 degrees (North through East)
! Clean map  min=-0.015509  max=0.70233 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.333255Jy  sigma=0.001737
! Fit after  self-cal, rms=0.333493Jy  sigma=0.001698
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.333493Jy  sigma=0.001698
! Fit after  self-cal, rms=0.333449Jy  sigma=0.001698
! Inverting map and beam 
! Estimated beam: bmin=3.725 mas, bmaj=10.42 mas, bpa=0.2773 degrees
! Estimated noise=827.656 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0125741 Jy
! Component: 100  -  total flux cleaned = 0.0138081 Jy
! Component: 150  -  total flux cleaned = 0.0138176 Jy
! Component: 200  -  total flux cleaned = 0.0138248 Jy
! Total flux subtracted in 200 components = 0.0138248 Jy
! Clean residual min=-0.013972 max=0.017461 Jy/beam
! Clean residual mean=0.000653 rms=0.004453 Jy/beam
! Combined flux in latest and established models = 1.22549 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 38 model components to the UV plane model.
! The established model now contains 216 components and 1.22549 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.332523Jy  sigma=0.001692
! Fit after  self-cal, rms=0.332312Jy  sigma=0.001691
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.332312Jy  sigma=0.001691
! Fit after  self-cal, rms=0.333043Jy  sigma=0.001688
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.333043Jy  sigma=0.001688
! Fit after  self-cal, rms=0.333035Jy  sigma=0.001688
! Inverting map and beam 
! Estimated beam: bmin=3.744 mas, bmaj=10.47 mas, bpa=0.1866 degrees
! Estimated noise=828.637 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0090988 Jy
! Component: 100  -  total flux cleaned = 0.00996198 Jy
! Component: 150  -  total flux cleaned = 0.00971418 Jy
! Component: 200  -  total flux cleaned = 0.00932093 Jy
! Total flux subtracted in 200 components = 0.00932093 Jy
! Clean residual min=-0.012747 max=0.015280 Jy/beam
! Clean residual mean=0.000599 rms=0.004034 Jy/beam
! Combined flux in latest and established models = 1.23481 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 231 components and 1.23481 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.332539Jy  sigma=0.001686
! Fit after  self-cal, rms=0.332447Jy  sigma=0.001685
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.873 mas, bmaj=19.3 mas, bpa=2.652 degrees
! Estimated noise=1000.48 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00674232 Jy
! Component: 100  -  total flux cleaned = 0.0064441 Jy
! Component: 150  -  total flux cleaned = 0.00687482 Jy
! Component: 200  -  total flux cleaned = 0.00744576 Jy
! Total flux subtracted in 200 components = 0.00744576 Jy
! Clean residual min=-0.017027 max=0.016716 Jy/beam
! Clean residual mean=0.000982 rms=0.005414 Jy/beam
! Combined flux in latest and established models = 1.24225 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 242 components and 1.24225 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.332416Jy  sigma=0.001684
! Fit after  self-cal, rms=0.332359Jy  sigma=0.001684
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.875 mas, bmaj=8.047 mas, bpa=4.164 degrees
! Estimated noise=1453.53 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.638327 Jy
! Component: 100  -  total flux cleaned = 0.827851 Jy
! Component: 150  -  total flux cleaned = 0.942541 Jy
! Component: 200  -  total flux cleaned = 1.01811 Jy
! Total flux subtracted in 200 components = 1.01811 Jy
! Clean residual min=-0.021339 max=0.034230 Jy/beam
! Clean residual mean=0.000780 rms=0.007291 Jy/beam
! Combined flux in latest and established models = 1.01811 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 58 model components to the UV plane model.
! The established model now contains 58 components and 1.01811 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.744 mas, bmaj=10.47 mas, bpa=0.1866 degrees
! Estimated noise=828.637 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.5, -3).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0895611 Jy
! Component: 100  -  total flux cleaned = 0.138004 Jy
! Component: 150  -  total flux cleaned = 0.168217 Jy
! Component: 200  -  total flux cleaned = 0.187865 Jy
! Total flux subtracted in 200 components = 0.187865 Jy
! Clean residual min=-0.016089 max=0.015509 Jy/beam
! Clean residual mean=0.000695 rms=0.004387 Jy/beam
! Combined flux in latest and established models = 1.20597 Jy
! Adding 107 model components to the UV plane model.
! The established model now contains 160 components and 1.20597 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.873 mas, bmaj=19.3 mas, bpa=2.652 degrees
! Estimated noise=1000.48 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.020883 Jy
! Component: 100  -  total flux cleaned = 0.0297322 Jy
! Component: 150  -  total flux cleaned = 0.0324368 Jy
! Component: 200  -  total flux cleaned = 0.0340428 Jy
! Total flux subtracted in 200 components = 0.0340428 Jy
! Clean residual min=-0.018126 max=0.016816 Jy/beam
! Clean residual mean=0.000993 rms=0.005360 Jy/beam
! Combined flux in latest and established models = 1.24002 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 183 components and 1.24002 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.744 mas, bmaj=10.47 mas, bpa=0.1866 degrees
! Estimated noise=828.637 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00222002 Jy
! Component: 100  -  total flux cleaned = -0.00179994 Jy
! Component: 150  -  total flux cleaned = -0.00160234 Jy
! Component: 200  -  total flux cleaned = -0.00124856 Jy
! Total flux subtracted in 200 components = -0.00124856 Jy
! Clean residual min=-0.012977 max=0.013429 Jy/beam
! Clean residual mean=0.000591 rms=0.003632 Jy/beam
! Combined flux in latest and established models = 1.23877 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 209 components and 1.23877 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.331634Jy  sigma=0.001682
! Fit after  self-cal, rms=0.331420Jy  sigma=0.001681
wmodel J0242-2132_S_1997_07_02_yyk\_map.mod
! Writing 209 model components to file: J0242-2132_S_1997_07_02_yyk_map.mod
wobs J0242-2132_S_1997_07_02_yyk\_uvs.fits
! Writing UV FITS file: J0242-2132_S_1997_07_02_yyk_uvs.fits
wwins J0242-2132_S_1997_07_02_yyk\_map.win
! wwins: Wrote 3 windows to J0242-2132_S_1997_07_02_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00207619 Jy
! Component: 100  -  total flux cleaned = 0.00392283 Jy
! Component: 150  -  total flux cleaned = 0.00594879 Jy
! Component: 200  -  total flux cleaned = 0.00796565 Jy
! Component: 250  -  total flux cleaned = 0.0104702 Jy
! Component: 300  -  total flux cleaned = 0.0126669 Jy
! Component: 350  -  total flux cleaned = 0.0147494 Jy
! Component: 400  -  total flux cleaned = 0.0167432 Jy
! Component: 450  -  total flux cleaned = 0.0182723 Jy
! Component: 500  -  total flux cleaned = 0.0196216 Jy
! Component: 550  -  total flux cleaned = 0.0211681 Jy
! Component: 600  -  total flux cleaned = 0.0228938 Jy
! Component: 650  -  total flux cleaned = 0.0245615 Jy
! Component: 700  -  total flux cleaned = 0.0257472 Jy
! Component: 750  -  total flux cleaned = 0.0270043 Jy
! Component: 800  -  total flux cleaned = 0.0280209 Jy
! Component: 850  -  total flux cleaned = 0.0292084 Jy
! Component: 900  -  total flux cleaned = 0.0300777 Jy
! Component: 950  -  total flux cleaned = 0.031211 Jy
! Component: 1000  -  total flux cleaned = 0.0322235 Jy
! Component: 1050  -  total flux cleaned = 0.0331221 Jy
! Component: 1100  -  total flux cleaned = 0.0338251 Jy
! Component: 1150  -  total flux cleaned = 0.0345123 Jy
! Component: 1200  -  total flux cleaned = 0.0351853 Jy
! Component: 1250  -  total flux cleaned = 0.0357631 Jy
! Component: 1300  -  total flux cleaned = 0.036412 Jy
! Component: 1350  -  total flux cleaned = 0.0371291 Jy
! Component: 1400  -  total flux cleaned = 0.0379077 Jy
! Component: 1450  -  total flux cleaned = 0.0385956 Jy
! Component: 1500  -  total flux cleaned = 0.0391953 Jy
! Component: 1550  -  total flux cleaned = 0.0398583 Jy
! Component: 1600  -  total flux cleaned = 0.0406534 Jy
! Component: 1650  -  total flux cleaned = 0.0412202 Jy
! Component: 1700  -  total flux cleaned = 0.0419172 Jy
! Component: 1750  -  total flux cleaned = 0.0423962 Jy
! Component: 1800  -  total flux cleaned = 0.0428662 Jy
! Component: 1850  -  total flux cleaned = 0.0431968 Jy
! Component: 1900  -  total flux cleaned = 0.0437184 Jy
! Component: 1950  -  total flux cleaned = 0.0441026 Jy
! Component: 2000  -  total flux cleaned = 0.0444186 Jy
! Total flux subtracted in 2048 components = 0.0448543 Jy
! Clean residual min=-0.003618 max=0.004576 Jy/beam
! Clean residual mean=0.000058 rms=0.001396 Jy/beam
! Combined flux in latest and established models = 1.28362 Jy
keep
! Adding 158 model components to the UV plane model.
! The established model now contains 367 components and 1.28362 Jy
![Exited script file: muppet]
wmap "J0242-2132_S_1997_07_02_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.744 x 10.47 at 0.1866 degrees (North through East)
! Clean map  min=-0.0070414  max=0.70847 Jy/beam
! Writing clean map to FITS file: J0242-2132_S_1997_07_02_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.708472 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00134752 
device "J0242-2132_S_1997_07_02_yyk\_map.eps/VPS"
! Attempting to open device: 'J0242-2132_S_1997_07_02_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.570601 0.570601 1.1412 2.28241 4.56481 9.12962 18.2592 36.5185 73.037
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.004 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.708 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.744 x 10.47 at 0.1866 degrees (North through East)
! Clean map  min=-0.0070414  max=0.70847 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0242-2132_S_1997_07_02_yyk\_map.gif/gif"
! Attempting to open device: 'J0242-2132_S_1997_07_02_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0242-2132_S_1997_07_02_yyk_uvs.log closed on Sun Jan  7 15:55:37 2007