! Started logfile: J0239-0234_X_1997_05_07_yyk_uvs.log on Mon Jan 8 02:30:02 2007 obs J0239-0234_X_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J0239-0234_X_1997_05_07_yyk_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.796804 visibilities/baseline/integration-bin. ! Found source: J0239-0234 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 613 lines of history. ! ! Reading 20940 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0239-0234_X_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.399512 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7329 mas, bmaj=1.969 mas, bpa=-4.547 degrees ! Estimated noise=1016.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.293355 Jy ! Component: 100 - total flux cleaned = 0.337189 Jy ! Total flux subtracted in 100 components = 0.337189 Jy ! Clean residual min=-0.009635 max=0.013000 Jy/beam ! Clean residual mean=0.000002 rms=0.002477 Jy/beam ! Combined flux in latest and established models = 0.337189 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.337189 Jy ! ! Correcting IF 1. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.201649Jy sigma=0.001271 ! Fit after self-cal, rms=0.201468Jy sigma=0.001269 ! Inverting map and beam ! Estimated beam: bmin=0.7329 mas, bmaj=1.969 mas, bpa=-4.547 degrees ! Estimated noise=1016.21 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9275 mas, bmaj=2.365 mas, bpa=-5.882 degrees ! Estimated noise=737.686 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0238685 Jy ! Component: 100 - total flux cleaned = 0.0323129 Jy ! Component: 150 - total flux cleaned = 0.0359566 Jy ! Component: 200 - total flux cleaned = 0.0376666 Jy ! Total flux subtracted in 200 components = 0.0376666 Jy ! Clean residual min=-0.006825 max=0.006192 Jy/beam ! Clean residual mean=-0.000006 rms=0.001566 Jy/beam ! Combined flux in latest and established models = 0.374856 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 31 components and 0.374856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200224Jy sigma=0.001257 ! Fit after self-cal, rms=0.200209Jy sigma=0.001257 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9275 x 2.365 at -5.882 degrees (North through East) ! Clean map min=-0.0062155 max=0.34575 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.99855 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.01 KP 1.01 ! LA 1.01 MK 1.02 NL 1.11 OV 0.98 ! PT 0.93 SC 0.92 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00028 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 0.99 KP 0.98 ! LA 1.00 MK 0.99 NL 1.10 OV 1.04 ! PT 0.89 SC 1.00 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.994164 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.99 KP 0.99 ! LA 1.00 MK 1.01 NL 1.08 OV 1.00 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.982633 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.03 KP 0.99 ! LA 1.02 MK 0.98 NL 1.09 OV 1.00 ! PT 0.99 SC 1.04 ! ! ! Fit before self-cal, rms=0.200209Jy sigma=0.001257 ! Fit after self-cal, rms=0.202148Jy sigma=0.001251 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202148Jy sigma=0.001251 ! Fit after self-cal, rms=0.202149Jy sigma=0.001251 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9277 mas, bmaj=2.377 mas, bpa=-5.701 degrees ! Estimated noise=729.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00407013 Jy ! Component: 100 - total flux cleaned = -0.00481128 Jy ! Component: 150 - total flux cleaned = -0.0048112 Jy ! Component: 200 - total flux cleaned = -0.00477383 Jy ! Total flux subtracted in 200 components = -0.00477383 Jy ! Clean residual min=-0.003911 max=0.004559 Jy/beam ! Clean residual mean=-0.000017 rms=0.000976 Jy/beam ! Combined flux in latest and established models = 0.370082 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 41 components and 0.370082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202090Jy sigma=0.001251 ! Fit after self-cal, rms=0.202085Jy sigma=0.001251 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202085Jy sigma=0.001251 ! Fit after self-cal, rms=0.196252Jy sigma=0.001212 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, -2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00470998 Jy ! Component: 100 - total flux cleaned = 0.00506242 Jy ! Component: 150 - total flux cleaned = 0.00489196 Jy ! Component: 200 - total flux cleaned = 0.00489151 Jy ! Total flux subtracted in 200 components = 0.00489151 Jy ! Clean residual min=-0.003134 max=0.003581 Jy/beam ! Clean residual mean=-0.000020 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.374973 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 65 components and 0.374973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196140Jy sigma=0.001211 ! Fit after self-cal, rms=0.195495Jy sigma=0.001207 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9277 x 2.377 at -5.701 degrees (North through East) ! Clean map min=-0.0028242 max=0.34559 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195495Jy sigma=0.001207 ! Fit after self-cal, rms=0.194412Jy sigma=0.001206 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194412Jy sigma=0.001206 ! Fit after self-cal, rms=0.194295Jy sigma=0.001205 ! Inverting map and beam ! Estimated beam: bmin=0.9248 mas, bmaj=2.372 mas, bpa=-5.809 degrees ! Estimated noise=726.498 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127367 Jy ! Component: 100 - total flux cleaned = 0.00128189 Jy ! Component: 150 - total flux cleaned = 0.00123235 Jy ! Component: 200 - total flux cleaned = 0.00118664 Jy ! Total flux subtracted in 200 components = 0.00118664 Jy ! Clean residual min=-0.002717 max=0.003289 Jy/beam ! Clean residual mean=-0.000018 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.37616 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 80 components and 0.37616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194265Jy sigma=0.001205 ! Fit after self-cal, rms=0.194227Jy sigma=0.001205 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194227Jy sigma=0.001205 ! Fit after self-cal, rms=0.194222Jy sigma=0.001203 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194222Jy sigma=0.001203 ! Fit after self-cal, rms=0.194208Jy sigma=0.001203 ! Inverting map and beam ! Estimated beam: bmin=0.9234 mas, bmaj=2.369 mas, bpa=-5.798 degrees ! Estimated noise=726.679 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000796207 Jy ! Component: 100 - total flux cleaned = 0.000843299 Jy ! Component: 150 - total flux cleaned = 0.000843223 Jy ! Component: 200 - total flux cleaned = 0.000842053 Jy ! Total flux subtracted in 200 components = 0.000842053 Jy ! Clean residual min=-0.002651 max=0.003169 Jy/beam ! Clean residual mean=-0.000015 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.377002 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 88 components and 0.377002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194194Jy sigma=0.001203 ! Fit after self-cal, rms=0.194185Jy sigma=0.001203 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.442 mas, bmaj=4.017 mas, bpa=8.982 degrees ! Estimated noise=920.611 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -2.46292e-05 Jy ! Component: 100 - total flux cleaned = -0.00029738 Jy ! Component: 150 - total flux cleaned = -0.000414089 Jy ! Component: 200 - total flux cleaned = -0.000461636 Jy ! Total flux subtracted in 200 components = -0.000461636 Jy ! Clean residual min=-0.002499 max=0.003246 Jy/beam ! Clean residual mean=-0.000029 rms=0.000882 Jy/beam ! Combined flux in latest and established models = 0.37654 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 95 components and 0.37654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194182Jy sigma=0.001203 ! Fit after self-cal, rms=0.194175Jy sigma=0.001203 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7298 mas, bmaj=1.969 mas, bpa=-4.492 degrees ! Estimated noise=1009.49 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.295043 Jy ! Component: 100 - total flux cleaned = 0.340751 Jy ! Component: 150 - total flux cleaned = 0.357095 Jy ! Component: 200 - total flux cleaned = 0.365842 Jy ! Total flux subtracted in 200 components = 0.365842 Jy ! Clean residual min=-0.004240 max=0.005436 Jy/beam ! Clean residual mean=-0.000008 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 0.365842 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.365842 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9234 mas, bmaj=2.369 mas, bpa=-5.798 degrees ! Estimated noise=726.679 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.2, -2.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00762452 Jy ! Component: 100 - total flux cleaned = 0.00996422 Jy ! Component: 150 - total flux cleaned = 0.0110305 Jy ! Component: 200 - total flux cleaned = 0.011417 Jy ! Total flux subtracted in 200 components = 0.011417 Jy ! Clean residual min=-0.002590 max=0.002822 Jy/beam ! Clean residual mean=-0.000016 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.377259 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 54 components and 0.377259 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.442 mas, bmaj=4.017 mas, bpa=8.982 degrees ! Estimated noise=920.611 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000349414 Jy ! Component: 100 - total flux cleaned = -0.000356551 Jy ! Component: 150 - total flux cleaned = -0.000385115 Jy ! Component: 200 - total flux cleaned = -0.000460028 Jy ! Total flux subtracted in 200 components = -0.000460028 Jy ! Clean residual min=-0.002377 max=0.003307 Jy/beam ! Clean residual mean=-0.000030 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.376799 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 69 components and 0.376799 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9234 mas, bmaj=2.369 mas, bpa=-5.798 degrees ! Estimated noise=726.679 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000161371 Jy ! Component: 100 - total flux cleaned = -0.000250022 Jy ! Component: 150 - total flux cleaned = -0.000287063 Jy ! Component: 200 - total flux cleaned = -0.000249504 Jy ! Total flux subtracted in 200 components = -0.000249504 Jy ! Clean residual min=-0.002496 max=0.002934 Jy/beam ! Clean residual mean=-0.000015 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.37655 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 83 components and 0.37655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194139Jy sigma=0.001202 ! Fit after self-cal, rms=0.194134Jy sigma=0.001202 wmodel J0239-0234_X_1997_05_07_yyk\_map.mod ! Writing 83 model components to file: J0239-0234_X_1997_05_07_yyk_map.mod wobs J0239-0234_X_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J0239-0234_X_1997_05_07_yyk_uvs.fits wwins J0239-0234_X_1997_05_07_yyk\_map.win ! wwins: Wrote 3 windows to J0239-0234_X_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000975033 Jy ! Component: 100 - total flux cleaned = 0.00142735 Jy ! Component: 150 - total flux cleaned = 0.00176847 Jy ! Component: 200 - total flux cleaned = 0.00196987 Jy ! Component: 250 - total flux cleaned = 0.0020072 Jy ! Component: 300 - total flux cleaned = 0.002007 Jy ! Component: 350 - total flux cleaned = 0.0020437 Jy ! Component: 400 - total flux cleaned = 0.00207924 Jy ! Component: 450 - total flux cleaned = 0.00208008 Jy ! Component: 500 - total flux cleaned = 0.0021475 Jy ! Component: 550 - total flux cleaned = 0.00221278 Jy ! Component: 600 - total flux cleaned = 0.00224493 Jy ! Component: 650 - total flux cleaned = 0.00237091 Jy ! Component: 700 - total flux cleaned = 0.00249443 Jy ! Component: 750 - total flux cleaned = 0.00258495 Jy ! Component: 800 - total flux cleaned = 0.00270365 Jy ! Component: 850 - total flux cleaned = 0.0027621 Jy ! Component: 900 - total flux cleaned = 0.00276201 Jy ! Component: 950 - total flux cleaned = 0.00284589 Jy ! Component: 1000 - total flux cleaned = 0.00281753 Jy ! Component: 1050 - total flux cleaned = 0.0028173 Jy ! Component: 1100 - total flux cleaned = 0.00281694 Jy ! Component: 1150 - total flux cleaned = 0.00284323 Jy ! Component: 1200 - total flux cleaned = 0.00276488 Jy ! Component: 1250 - total flux cleaned = 0.00273898 Jy ! Component: 1300 - total flux cleaned = 0.00281517 Jy ! Component: 1350 - total flux cleaned = 0.00284046 Jy ! Component: 1400 - total flux cleaned = 0.00286501 Jy ! Component: 1450 - total flux cleaned = 0.00291356 Jy ! Component: 1500 - total flux cleaned = 0.00298579 Jy ! Component: 1550 - total flux cleaned = 0.0030096 Jy ! Component: 1600 - total flux cleaned = 0.00307987 Jy ! Component: 1650 - total flux cleaned = 0.00314923 Jy ! Component: 1700 - total flux cleaned = 0.00319441 Jy ! Component: 1750 - total flux cleaned = 0.0032618 Jy ! Component: 1800 - total flux cleaned = 0.00330633 Jy ! Component: 1850 - total flux cleaned = 0.0033503 Jy ! Component: 1900 - total flux cleaned = 0.00337207 Jy ! Component: 1950 - total flux cleaned = 0.00350079 Jy ! Component: 2000 - total flux cleaned = 0.00347955 Jy ! Total flux subtracted in 2048 components = 0.00347971 Jy ! Clean residual min=-0.001182 max=0.001170 Jy/beam ! Clean residual mean=-0.000015 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.38003 Jy keep ! Adding 137 model components to the UV plane model. ! The established model now contains 220 components and 0.38003 Jy ![Exited script file: muppet] wmap "J0239-0234_X_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9234 x 2.369 at -5.798 degrees (North through East) ! Clean map min=-0.0021795 max=0.34483 Jy/beam ! Writing clean map to FITS file: J0239-0234_X_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.344834 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000381727 device "J0239-0234_X_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J0239-0234_X_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.332096 0.332096 0.664192 1.32838 2.65677 5.31354 10.6271 21.2541 42.5083 85.0166 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.344 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9234 x 2.369 at -5.798 degrees (North through East) ! Clean map min=-0.0021795 max=0.34483 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0239-0234_X_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J0239-0234_X_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0239-0234_X_1997_05_07_yyk_uvs.log closed on Mon Jan 8 02:30:11 2007