! Started logfile: J0220-2151_X_1997_08_27_yyk_uvs.log on Mon Jan 8 02:25:23 2007 obs J0220-2151_X_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J0220-2151_X_1997_08_27_yyk_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.973516 visibilities/baseline/integration-bin. ! Found source: J0220-2151 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 701 lines of history. ! ! Reading 25584 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0220-2151_X_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.265806 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7052 mas, bmaj=1.764 mas, bpa=-4.525 degrees ! Estimated noise=1189.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.138392 Jy ! Component: 100 - total flux cleaned = 0.159633 Jy ! Total flux subtracted in 100 components = 0.159633 Jy ! Clean residual min=-0.006155 max=0.007576 Jy/beam ! Clean residual mean=0.000025 rms=0.001560 Jy/beam ! Combined flux in latest and established models = 0.159633 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.159633 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.211014Jy sigma=0.001207 ! Fit after self-cal, rms=0.210901Jy sigma=0.001206 ! Inverting map and beam ! Estimated beam: bmin=0.7052 mas, bmaj=1.764 mas, bpa=-4.525 degrees ! Estimated noise=1189.45 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8883 mas, bmaj=2.2 mas, bpa=-5.628 degrees ! Estimated noise=720.983 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109221 Jy ! Component: 100 - total flux cleaned = 0.0150196 Jy ! Component: 150 - total flux cleaned = 0.01668 Jy ! Component: 200 - total flux cleaned = 0.0171799 Jy ! Total flux subtracted in 200 components = 0.0171799 Jy ! Clean residual min=-0.004023 max=0.004001 Jy/beam ! Clean residual mean=0.000007 rms=0.000946 Jy/beam ! Combined flux in latest and established models = 0.176813 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 30 components and 0.176813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210687Jy sigma=0.001204 ! Fit after self-cal, rms=0.210685Jy sigma=0.001204 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8883 x 2.2 at -5.628 degrees (North through East) ! Clean map min=-0.0037115 max=0.16268 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.999765 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 1.10 KP 0.99 ! LA 1.00 MK 1.08 NL 1.00 OV 0.97 ! PT 0.93 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00821 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 1.00 KP 1.03 ! LA 1.00 MK 0.98 NL 0.98 OV 1.06 ! PT 0.92 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.996519 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 1.04 KP 0.98 ! LA 0.96 MK 1.00 NL 0.98 OV 0.99 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.971813 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 1.20 KP 1.01 ! LA 0.97 MK 0.98 NL 1.06 OV 1.04 ! PT 1.01 SC 0.96 ! ! ! Fit before self-cal, rms=0.210685Jy sigma=0.001204 ! Fit after self-cal, rms=0.213009Jy sigma=0.001203 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213009Jy sigma=0.001203 ! Fit after self-cal, rms=0.213010Jy sigma=0.001203 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8919 mas, bmaj=2.19 mas, bpa=-4.884 degrees ! Estimated noise=712.351 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00258533 Jy ! Component: 100 - total flux cleaned = -0.00302223 Jy ! Component: 150 - total flux cleaned = -0.00302352 Jy ! Component: 200 - total flux cleaned = -0.00302222 Jy ! Total flux subtracted in 200 components = -0.00302222 Jy ! Clean residual min=-0.003402 max=0.003096 Jy/beam ! Clean residual mean=-0.000004 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.173791 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.173791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212973Jy sigma=0.001203 ! Fit after self-cal, rms=0.212973Jy sigma=0.001203 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212973Jy sigma=0.001203 ! Fit after self-cal, rms=0.211769Jy sigma=0.001197 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000878298 Jy ! Component: 100 - total flux cleaned = 0.000904762 Jy ! Component: 150 - total flux cleaned = 0.000927408 Jy ! Component: 200 - total flux cleaned = 0.0009473 Jy ! Total flux subtracted in 200 components = 0.0009473 Jy ! Clean residual min=-0.003339 max=0.003193 Jy/beam ! Clean residual mean=-0.000005 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.174738 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.174738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211770Jy sigma=0.001197 ! Fit after self-cal, rms=0.211649Jy sigma=0.001196 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8919 x 2.19 at -4.884 degrees (North through East) ! Clean map min=-0.0030751 max=0.16331 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211649Jy sigma=0.001196 ! Fit after self-cal, rms=0.216952Jy sigma=0.001195 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216952Jy sigma=0.001195 ! Fit after self-cal, rms=0.216947Jy sigma=0.001195 ! Inverting map and beam ! Estimated beam: bmin=0.89 mas, bmaj=2.198 mas, bpa=-4.845 degrees ! Estimated noise=709.445 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000225909 Jy ! Component: 100 - total flux cleaned = 0.000244161 Jy ! Component: 150 - total flux cleaned = 0.000260229 Jy ! Component: 200 - total flux cleaned = 0.000261873 Jy ! Total flux subtracted in 200 components = 0.000261873 Jy ! Clean residual min=-0.003036 max=0.002824 Jy/beam ! Clean residual mean=0.000003 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.175 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 42 components and 0.175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216945Jy sigma=0.001195 ! Fit after self-cal, rms=0.216951Jy sigma=0.001195 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216951Jy sigma=0.001195 ! Fit after self-cal, rms=0.220254Jy sigma=0.001194 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220254Jy sigma=0.001194 ! Fit after self-cal, rms=0.220267Jy sigma=0.001194 ! Inverting map and beam ! Estimated beam: bmin=0.8929 mas, bmaj=2.218 mas, bpa=-4.846 degrees ! Estimated noise=711.372 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103965 Jy ! Component: 100 - total flux cleaned = 0.000101847 Jy ! Component: 150 - total flux cleaned = 0.000119925 Jy ! Component: 200 - total flux cleaned = 0.000135715 Jy ! Total flux subtracted in 200 components = 0.000135715 Jy ! Clean residual min=-0.003221 max=0.002783 Jy/beam ! Clean residual mean=0.000006 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.175136 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 48 components and 0.175136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220263Jy sigma=0.001194 ! Fit after self-cal, rms=0.220271Jy sigma=0.001194 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.351 mas, bmaj=4.949 mas, bpa=0.5657 degrees ! Estimated noise=920.489 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000322791 Jy ! Component: 100 - total flux cleaned = 0.000329543 Jy ! Component: 150 - total flux cleaned = 0.000346953 Jy ! Component: 200 - total flux cleaned = 0.000343646 Jy ! Total flux subtracted in 200 components = 0.000343646 Jy ! Clean residual min=-0.002725 max=0.002905 Jy/beam ! Clean residual mean=0.000012 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.17548 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 51 components and 0.17548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220273Jy sigma=0.001194 ! Fit after self-cal, rms=0.220273Jy sigma=0.001194 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7035 mas, bmaj=1.763 mas, bpa=-4.143 degrees ! Estimated noise=1188.32 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.139577 Jy ! Component: 100 - total flux cleaned = 0.161993 Jy ! Component: 150 - total flux cleaned = 0.169268 Jy ! Component: 200 - total flux cleaned = 0.172396 Jy ! Total flux subtracted in 200 components = 0.172396 Jy ! Clean residual min=-0.004884 max=0.003918 Jy/beam ! Clean residual mean=0.000009 rms=0.001131 Jy/beam ! Combined flux in latest and established models = 0.172396 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.172396 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8929 mas, bmaj=2.218 mas, bpa=-4.846 degrees ! Estimated noise=711.372 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198433 Jy ! Component: 100 - total flux cleaned = 0.00222013 Jy ! Component: 150 - total flux cleaned = 0.00244723 Jy ! Component: 200 - total flux cleaned = 0.00249965 Jy ! Total flux subtracted in 200 components = 0.00249965 Jy ! Clean residual min=-0.003140 max=0.002780 Jy/beam ! Clean residual mean=0.000006 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.174895 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.174895 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.351 mas, bmaj=4.949 mas, bpa=0.5657 degrees ! Estimated noise=920.489 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000631757 Jy ! Component: 100 - total flux cleaned = 0.000600554 Jy ! Component: 150 - total flux cleaned = 0.000598639 Jy ! Component: 200 - total flux cleaned = 0.000596883 Jy ! Total flux subtracted in 200 components = 0.000596883 Jy ! Clean residual min=-0.002709 max=0.002891 Jy/beam ! Clean residual mean=0.000012 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.175492 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 35 components and 0.175492 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8929 mas, bmaj=2.218 mas, bpa=-4.846 degrees ! Estimated noise=711.372 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000457663 Jy ! Component: 100 - total flux cleaned = -0.000382721 Jy ! Component: 150 - total flux cleaned = -0.000332233 Jy ! Component: 200 - total flux cleaned = -0.000294626 Jy ! Total flux subtracted in 200 components = -0.000294626 Jy ! Clean residual min=-0.003177 max=0.002796 Jy/beam ! Clean residual mean=0.000006 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.175198 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.175198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220273Jy sigma=0.001194 ! Fit after self-cal, rms=0.220277Jy sigma=0.001194 wmodel J0220-2151_X_1997_08_27_yyk\_map.mod ! Writing 43 model components to file: J0220-2151_X_1997_08_27_yyk_map.mod wobs J0220-2151_X_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J0220-2151_X_1997_08_27_yyk_uvs.fits wwins J0220-2151_X_1997_08_27_yyk\_map.win ! wwins: Wrote 1 windows to J0220-2151_X_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00112545 Jy ! Component: 100 - total flux cleaned = -0.00147726 Jy ! Component: 150 - total flux cleaned = -0.00171565 Jy ! Component: 200 - total flux cleaned = -0.00176128 Jy ! Component: 250 - total flux cleaned = -0.00184829 Jy ! Component: 300 - total flux cleaned = -0.00176511 Jy ! Component: 350 - total flux cleaned = -0.00188906 Jy ! Component: 400 - total flux cleaned = -0.00208784 Jy ! Component: 450 - total flux cleaned = -0.00224304 Jy ! Component: 500 - total flux cleaned = -0.00250883 Jy ! Component: 550 - total flux cleaned = -0.0027672 Jy ! Component: 600 - total flux cleaned = -0.00294734 Jy ! Component: 650 - total flux cleaned = -0.00316104 Jy ! Component: 700 - total flux cleaned = -0.00330078 Jy ! Component: 750 - total flux cleaned = -0.00340418 Jy ! Component: 800 - total flux cleaned = -0.00357276 Jy ! Component: 850 - total flux cleaned = -0.00367234 Jy ! Component: 900 - total flux cleaned = -0.00373752 Jy ! Component: 950 - total flux cleaned = -0.00380196 Jy ! Component: 1000 - total flux cleaned = -0.0038648 Jy ! Component: 1050 - total flux cleaned = -0.0038955 Jy ! Component: 1100 - total flux cleaned = -0.00395627 Jy ! Component: 1150 - total flux cleaned = -0.00395547 Jy ! Component: 1200 - total flux cleaned = -0.00404516 Jy ! Component: 1250 - total flux cleaned = -0.00419139 Jy ! Component: 1300 - total flux cleaned = -0.00419105 Jy ! Component: 1350 - total flux cleaned = -0.00421961 Jy ! Component: 1400 - total flux cleaned = -0.00430445 Jy ! Component: 1450 - total flux cleaned = -0.00438798 Jy ! Component: 1500 - total flux cleaned = -0.00444313 Jy ! Component: 1550 - total flux cleaned = -0.00441562 Jy ! Component: 1600 - total flux cleaned = -0.00449649 Jy ! Component: 1650 - total flux cleaned = -0.0045497 Jy ! Component: 1700 - total flux cleaned = -0.00460283 Jy ! Component: 1750 - total flux cleaned = -0.00465498 Jy ! Component: 1800 - total flux cleaned = -0.00475808 Jy ! Component: 1850 - total flux cleaned = -0.00475807 Jy ! Component: 1900 - total flux cleaned = -0.00478352 Jy ! Component: 1950 - total flux cleaned = -0.00478362 Jy ! Component: 2000 - total flux cleaned = -0.00495734 Jy ! Total flux subtracted in 2048 components = -0.00498174 Jy ! Clean residual min=-0.001398 max=0.001616 Jy/beam ! Clean residual mean=0.000001 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.170216 Jy keep ! Adding 135 model components to the UV plane model. ! The established model now contains 178 components and 0.170216 Jy ![Exited script file: muppet] wmap "J0220-2151_X_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8929 x 2.218 at -4.846 degrees (North through East) ! Clean map min=-0.002586 max=0.16317 Jy/beam ! Writing clean map to FITS file: J0220-2151_X_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.163172 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000458891 device "J0220-2151_X_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J0220-2151_X_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.843695 0.843695 1.68739 3.37478 6.74956 13.4991 26.9983 53.9965 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.163 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8929 x 2.218 at -4.846 degrees (North through East) ! Clean map min=-0.002586 max=0.16317 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0220-2151_X_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J0220-2151_X_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0220-2151_X_1997_08_27_yyk_uvs.log closed on Mon Jan 8 02:25:32 2007