! Started logfile: J0217-1631_S_1997_07_02_yyk_uvs.log on Sun Jan 7 15:49:59 2007 obs J0217-1631_S_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J0217-1631_S_1997_07_02_yyk_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1.84289 visibilities/baseline/integration-bin. ! Found source: J0217-1631 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 754 lines of history. ! ! Reading 47436 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0217-1631_S_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.512201 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.779 mas, bmaj=6.585 mas, bpa=-5.816 degrees ! Estimated noise=1860.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.346266 Jy ! Component: 100 - total flux cleaned = 0.392645 Jy ! Total flux subtracted in 100 components = 0.392645 Jy ! Clean residual min=-0.015850 max=0.019452 Jy/beam ! Clean residual mean=0.000093 rms=0.003940 Jy/beam ! Combined flux in latest and established models = 0.392645 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.392645 Jy ! ! Correcting IF 1. ! A total of 210 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.313183Jy sigma=0.001667 ! Fit after self-cal, rms=0.313104Jy sigma=0.001666 ! Inverting map and beam ! Estimated beam: bmin=2.779 mas, bmaj=6.585 mas, bpa=-5.817 degrees ! Estimated noise=1860.5 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.575 mas, bmaj=8.965 mas, bpa=-6.567 degrees ! Estimated noise=791.829 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16.5, 36.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00746043 Jy ! Component: 100 - total flux cleaned = 0.00706968 Jy ! Component: 150 - total flux cleaned = 0.0065473 Jy ! Component: 200 - total flux cleaned = 0.00655872 Jy ! Total flux subtracted in 200 components = 0.00655872 Jy ! Clean residual min=-0.008851 max=0.011482 Jy/beam ! Clean residual mean=0.000145 rms=0.002279 Jy/beam ! Combined flux in latest and established models = 0.399204 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 27 components and 0.399204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.312196Jy sigma=0.001662 ! Fit after self-cal, rms=0.312157Jy sigma=0.001662 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.575 x 8.965 at -6.567 degrees (North through East) ! Clean map min=-0.0082385 max=0.39106 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02778 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.10 HN 0.87 KP 0.91 ! LA 1.02 MK 0.99 NL 1.00* OV 1.07 ! PT 0.99 SC 0.80 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.983907 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.14 HN 0.98 KP 0.97 ! LA 1.10 MK 1.05 NL 0.98 OV 1.02 ! PT 0.96 SC 0.90 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.04444 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 0.93 KP 0.95 ! LA 0.83 MK 0.91 NL 0.93 OV 0.91 ! PT 1.10 SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.991543 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.06 HN 1.10 KP 0.96 ! LA 0.92 MK 1.06 NL 1.05 OV 0.93 ! PT 0.95 SC 0.99 ! ! ! Fit before self-cal, rms=0.312157Jy sigma=0.001662 ! Fit after self-cal, rms=0.303569Jy sigma=0.001648 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.303569Jy sigma=0.001648 ! Fit after self-cal, rms=0.303563Jy sigma=0.001648 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.527 mas, bmaj=8.781 mas, bpa=-5.306 degrees ! Estimated noise=798.569 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224148 Jy ! Component: 100 - total flux cleaned = 0.00213849 Jy ! Component: 150 - total flux cleaned = 0.00143065 Jy ! Component: 200 - total flux cleaned = 0.00114191 Jy ! Total flux subtracted in 200 components = 0.00114191 Jy ! Clean residual min=-0.004120 max=0.005573 Jy/beam ! Clean residual mean=0.000102 rms=0.001278 Jy/beam ! Combined flux in latest and established models = 0.400346 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 58 components and 0.400345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.303374Jy sigma=0.001647 ! Fit after self-cal, rms=0.303364Jy sigma=0.001647 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.303364Jy sigma=0.001647 ! Fit after self-cal, rms=0.302450Jy sigma=0.001642 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00011684 Jy ! Component: 100 - total flux cleaned = 0.000104463 Jy ! Component: 150 - total flux cleaned = 0.000203054 Jy ! Component: 200 - total flux cleaned = 0.000249704 Jy ! Total flux subtracted in 200 components = 0.000249704 Jy ! Clean residual min=-0.004108 max=0.005319 Jy/beam ! Clean residual mean=0.000101 rms=0.001260 Jy/beam ! Combined flux in latest and established models = 0.400595 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 82 components and 0.400595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.302431Jy sigma=0.001642 ! Fit after self-cal, rms=0.302310Jy sigma=0.001641 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.527 x 8.781 at -5.306 degrees (North through East) ! Clean map min=-0.0040307 max=0.39743 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.302310Jy sigma=0.001641 ! Fit after self-cal, rms=0.298567Jy sigma=0.001636 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298567Jy sigma=0.001636 ! Fit after self-cal, rms=0.298545Jy sigma=0.001636 ! Inverting map and beam ! Estimated beam: bmin=3.505 mas, bmaj=8.781 mas, bpa=-5.186 degrees ! Estimated noise=797.188 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00077193 Jy ! Component: 100 - total flux cleaned = -0.000713826 Jy ! Component: 150 - total flux cleaned = -0.000609404 Jy ! Component: 200 - total flux cleaned = -0.000562296 Jy ! Total flux subtracted in 200 components = -0.000562296 Jy ! Clean residual min=-0.004026 max=0.004493 Jy/beam ! Clean residual mean=0.000085 rms=0.001151 Jy/beam ! Combined flux in latest and established models = 0.400033 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 93 components and 0.400033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298525Jy sigma=0.001636 ! Fit after self-cal, rms=0.298518Jy sigma=0.001636 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298518Jy sigma=0.001636 ! Fit after self-cal, rms=0.298212Jy sigma=0.001634 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298212Jy sigma=0.001634 ! Fit after self-cal, rms=0.298212Jy sigma=0.001634 ! Inverting map and beam ! Estimated beam: bmin=3.495 mas, bmaj=8.761 mas, bpa=-5.161 degrees ! Estimated noise=797.495 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 4.05451e-05 Jy ! Component: 100 - total flux cleaned = 0.00013858 Jy ! Component: 150 - total flux cleaned = 0.000263853 Jy ! Component: 200 - total flux cleaned = 0.000376911 Jy ! Total flux subtracted in 200 components = 0.000376911 Jy ! Clean residual min=-0.003966 max=0.004410 Jy/beam ! Clean residual mean=0.000086 rms=0.001128 Jy/beam ! Combined flux in latest and established models = 0.40041 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 106 components and 0.40041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298201Jy sigma=0.001634 ! Fit after self-cal, rms=0.298201Jy sigma=0.001634 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.238 mas, bmaj=16.43 mas, bpa=-0.4709 degrees ! Estimated noise=988.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000358002 Jy ! Component: 100 - total flux cleaned = 0.000512542 Jy ! Component: 150 - total flux cleaned = 0.000621648 Jy ! Component: 200 - total flux cleaned = 0.000719121 Jy ! Total flux subtracted in 200 components = 0.000719121 Jy ! Clean residual min=-0.004683 max=0.005513 Jy/beam ! Clean residual mean=0.000158 rms=0.001504 Jy/beam ! Combined flux in latest and established models = 0.401129 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 117 components and 0.401129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298199Jy sigma=0.001634 ! Fit after self-cal, rms=0.298200Jy sigma=0.001634 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.759 mas, bmaj=6.556 mas, bpa=-4.953 degrees ! Estimated noise=1866.01 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.348251 Jy ! Component: 100 - total flux cleaned = 0.395563 Jy ! Component: 150 - total flux cleaned = 0.400816 Jy ! Component: 200 - total flux cleaned = 0.400792 Jy ! Total flux subtracted in 200 components = 0.400792 Jy ! Clean residual min=-0.008948 max=0.008579 Jy/beam ! Clean residual mean=0.000040 rms=0.002521 Jy/beam ! Combined flux in latest and established models = 0.400792 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.400792 Jy ! Inverting map and beam ! Estimated beam: bmin=3.495 mas, bmaj=8.761 mas, bpa=-5.161 degrees ! Estimated noise=797.495 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012968 Jy ! Component: 100 - total flux cleaned = 0.000371711 Jy ! Component: 150 - total flux cleaned = 7.43245e-05 Jy ! Component: 200 - total flux cleaned = -6.46699e-06 Jy ! Total flux subtracted in 200 components = -6.46699e-06 Jy ! Clean residual min=-0.004058 max=0.004641 Jy/beam ! Clean residual mean=0.000088 rms=0.001177 Jy/beam ! Combined flux in latest and established models = 0.400786 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 39 components and 0.400786 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.238 mas, bmaj=16.43 mas, bpa=-0.4709 degrees ! Estimated noise=988.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000228808 Jy ! Component: 100 - total flux cleaned = 0.00022863 Jy ! Component: 150 - total flux cleaned = 0.000258403 Jy ! Component: 200 - total flux cleaned = 0.000259834 Jy ! Total flux subtracted in 200 components = 0.000259834 Jy ! Clean residual min=-0.004816 max=0.005690 Jy/beam ! Clean residual mean=0.000161 rms=0.001533 Jy/beam ! Combined flux in latest and established models = 0.401045 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 54 components and 0.401045 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.495 mas, bmaj=8.761 mas, bpa=-5.161 degrees ! Estimated noise=797.495 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -4.45512e-06 Jy ! Component: 100 - total flux cleaned = 5.01256e-05 Jy ! Component: 150 - total flux cleaned = 0.000102649 Jy ! Component: 200 - total flux cleaned = 5.60614e-05 Jy ! Total flux subtracted in 200 components = 5.60614e-05 Jy ! Clean residual min=-0.004051 max=0.004557 Jy/beam ! Clean residual mean=0.000085 rms=0.001149 Jy/beam ! Combined flux in latest and established models = 0.401101 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 70 components and 0.401101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298223Jy sigma=0.001634 ! Fit after self-cal, rms=0.298221Jy sigma=0.001634 wmodel J0217-1631_S_1997_07_02_yyk\_map.mod ! Writing 70 model components to file: J0217-1631_S_1997_07_02_yyk_map.mod wobs J0217-1631_S_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J0217-1631_S_1997_07_02_yyk_uvs.fits wwins J0217-1631_S_1997_07_02_yyk\_map.win ! wwins: Wrote 2 windows to J0217-1631_S_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124225 Jy ! Component: 100 - total flux cleaned = 0.0014595 Jy ! Component: 150 - total flux cleaned = 0.00184861 Jy ! Component: 200 - total flux cleaned = 0.0023346 Jy ! Component: 250 - total flux cleaned = 0.00273853 Jy ! Component: 300 - total flux cleaned = 0.00306909 Jy ! Component: 350 - total flux cleaned = 0.00338665 Jy ! Component: 400 - total flux cleaned = 0.00363908 Jy ! Component: 450 - total flux cleaned = 0.00368717 Jy ! Component: 500 - total flux cleaned = 0.00368694 Jy ! Component: 550 - total flux cleaned = 0.00382324 Jy ! Component: 600 - total flux cleaned = 0.00386707 Jy ! Component: 650 - total flux cleaned = 0.00412705 Jy ! Component: 700 - total flux cleaned = 0.00438091 Jy ! Component: 750 - total flux cleaned = 0.0045469 Jy ! Component: 800 - total flux cleaned = 0.00475032 Jy ! Component: 850 - total flux cleaned = 0.00482997 Jy ! Component: 900 - total flux cleaned = 0.00498587 Jy ! Component: 950 - total flux cleaned = 0.00502367 Jy ! Component: 1000 - total flux cleaned = 0.00509953 Jy ! Component: 1050 - total flux cleaned = 0.00502592 Jy ! Component: 1100 - total flux cleaned = 0.00506337 Jy ! Component: 1150 - total flux cleaned = 0.00513497 Jy ! Component: 1200 - total flux cleaned = 0.00509974 Jy ! Component: 1250 - total flux cleaned = 0.00510046 Jy ! Component: 1300 - total flux cleaned = 0.00520379 Jy ! Component: 1350 - total flux cleaned = 0.00520395 Jy ! Component: 1400 - total flux cleaned = 0.00526989 Jy ! Component: 1450 - total flux cleaned = 0.00523702 Jy ! Component: 1500 - total flux cleaned = 0.00526929 Jy ! Component: 1550 - total flux cleaned = 0.00533324 Jy ! Component: 1600 - total flux cleaned = 0.00542739 Jy ! Component: 1650 - total flux cleaned = 0.00548925 Jy ! Component: 1700 - total flux cleaned = 0.00555047 Jy ! Component: 1750 - total flux cleaned = 0.00567153 Jy ! Component: 1800 - total flux cleaned = 0.00579085 Jy ! Component: 1850 - total flux cleaned = 0.00584965 Jy ! Component: 1900 - total flux cleaned = 0.00584992 Jy ! Component: 1950 - total flux cleaned = 0.0059076 Jy ! Component: 2000 - total flux cleaned = 0.00585089 Jy ! Total flux subtracted in 2048 components = 0.00596427 Jy ! Clean residual min=-0.001766 max=0.001761 Jy/beam ! Clean residual mean=0.000053 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.407066 Jy keep ! Adding 138 model components to the UV plane model. ! The established model now contains 208 components and 0.407066 Jy ![Exited script file: muppet] wmap "J0217-1631_S_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.495 x 8.761 at -5.161 degrees (North through East) ! Clean map min=-0.0037177 max=0.39793 Jy/beam ! Writing clean map to FITS file: J0217-1631_S_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.397926 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000584872 device "J0217-1631_S_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J0217-1631_S_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.44094 0.44094 0.881879 1.76376 3.52752 7.05503 14.1101 28.2201 56.4403 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.397 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.495 x 8.761 at -5.161 degrees (North through East) ! Clean map min=-0.0037177 max=0.39793 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0217-1631_S_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J0217-1631_S_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0217-1631_S_1997_07_02_yyk_uvs.log closed on Sun Jan 7 15:50:06 2007