! Started logfile: J0215-0222_X_1997_05_07_yyk_uvs.log on Mon Jan 8 02:23:02 2007 obs J0215-0222_X_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J0215-0222_X_1997_05_07_yyk_uva.fits ! AN table 1: 147 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.782615 visibilities/baseline/integration-bin. ! Found source: J0215-0222 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 613 lines of history. ! ! Reading 20708 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0215-0222_X_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.503686 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7752 mas, bmaj=2.004 mas, bpa=-4.177 degrees ! Estimated noise=1331.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.375202 Jy ! Component: 100 - total flux cleaned = 0.474979 Jy ! Total flux subtracted in 100 components = 0.474979 Jy ! Clean residual min=-0.016580 max=0.028281 Jy/beam ! Clean residual mean=0.000082 rms=0.004393 Jy/beam ! Combined flux in latest and established models = 0.474979 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.474979 Jy ! ! Correcting IF 1. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.217417Jy sigma=0.001389 ! Fit after self-cal, rms=0.217117Jy sigma=0.001387 ! Inverting map and beam ! Estimated beam: bmin=0.7752 mas, bmaj=2.004 mas, bpa=-4.177 degrees ! Estimated noise=1331.51 mJy/beam. ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0352181 Jy ! Component: 100 - total flux cleaned = 0.0511457 Jy ! Total flux subtracted in 100 components = 0.0511457 Jy ! Clean residual min=-0.014887 max=0.015973 Jy/beam ! Clean residual mean=0.000056 rms=0.003333 Jy/beam ! Combined flux in latest and established models = 0.526125 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 21 components and 0.526125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211997Jy sigma=0.001344 ! Fit after self-cal, rms=0.211941Jy sigma=0.001343 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9349 mas, bmaj=2.345 mas, bpa=-5.78 degrees ! Estimated noise=746.966 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203431 Jy ! Component: 100 - total flux cleaned = 0.0291348 Jy ! Component: 150 - total flux cleaned = 0.0334183 Jy ! Component: 200 - total flux cleaned = 0.0347183 Jy ! Total flux subtracted in 200 components = 0.0347183 Jy ! Clean residual min=-0.010737 max=0.016744 Jy/beam ! Clean residual mean=0.000049 rms=0.003101 Jy/beam ! Combined flux in latest and established models = 0.560843 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 30 components and 0.560843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211275Jy sigma=0.001335 ! Fit after self-cal, rms=0.211264Jy sigma=0.001335 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9349 x 2.345 at -5.78 degrees (North through East) ! Clean map min=-0.010096 max=0.42092 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.997263 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.02 KP 1.00 ! LA 1.02 MK 0.99 NL 1.15 OV 0.96 ! PT 0.93 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.999832 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.04 KP 1.01 ! LA 0.99 MK 0.95 NL 1.11 OV 1.03 ! PT 0.89 SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.988753 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 1.04 KP 1.00 ! LA 1.00 MK 0.95 NL 1.13 OV 0.97 ! PT 0.94 SC 1.06 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.977895 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 1.07 KP 1.00 ! LA 1.02 MK 0.95 NL 1.13 OV 0.98 ! PT 0.96 SC 1.06 ! ! ! Fit before self-cal, rms=0.211264Jy sigma=0.001335 ! Fit after self-cal, rms=0.212431Jy sigma=0.001321 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212431Jy sigma=0.001321 ! Fit after self-cal, rms=0.212438Jy sigma=0.001321 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.924 mas, bmaj=2.36 mas, bpa=-6.369 degrees ! Estimated noise=729.275 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -5.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0086858 Jy ! Component: 100 - total flux cleaned = 0.00878734 Jy ! Component: 150 - total flux cleaned = 0.00819107 Jy ! Component: 200 - total flux cleaned = 0.00751129 Jy ! Total flux subtracted in 200 components = 0.00751129 Jy ! Clean residual min=-0.004602 max=0.005317 Jy/beam ! Clean residual mean=0.000008 rms=0.001250 Jy/beam ! Combined flux in latest and established models = 0.568355 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 56 components and 0.568355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211672Jy sigma=0.001315 ! Fit after self-cal, rms=0.211600Jy sigma=0.001315 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211600Jy sigma=0.001315 ! Fit after self-cal, rms=0.202229Jy sigma=0.001250 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00448306 Jy ! Component: 100 - total flux cleaned = 0.00583341 Jy ! Component: 150 - total flux cleaned = 0.00609902 Jy ! Component: 200 - total flux cleaned = 0.00617303 Jy ! Total flux subtracted in 200 components = 0.00617303 Jy ! Clean residual min=-0.004401 max=0.004277 Jy/beam ! Clean residual mean=0.000005 rms=0.001110 Jy/beam ! Combined flux in latest and established models = 0.574528 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 68 components and 0.574528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202130Jy sigma=0.001249 ! Fit after self-cal, rms=0.200540Jy sigma=0.001237 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.924 x 2.36 at -6.369 degrees (North through East) ! Clean map min=-0.0041624 max=0.41653 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200540Jy sigma=0.001237 ! Fit after self-cal, rms=0.198700Jy sigma=0.001235 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198700Jy sigma=0.001235 ! Fit after self-cal, rms=0.198242Jy sigma=0.001232 ! Inverting map and beam ! Estimated beam: bmin=0.9192 mas, bmaj=2.353 mas, bpa=-6.437 degrees ! Estimated noise=725.099 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00361245 Jy ! Component: 100 - total flux cleaned = 0.00426205 Jy ! Component: 150 - total flux cleaned = 0.0046156 Jy ! Component: 200 - total flux cleaned = 0.00461909 Jy ! Total flux subtracted in 200 components = 0.00461909 Jy ! Clean residual min=-0.003797 max=0.003418 Jy/beam ! Clean residual mean=0.000008 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.579147 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 85 components and 0.579147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198192Jy sigma=0.001231 ! Fit after self-cal, rms=0.197989Jy sigma=0.001230 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197989Jy sigma=0.001230 ! Fit after self-cal, rms=0.197620Jy sigma=0.001228 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197620Jy sigma=0.001228 ! Fit after self-cal, rms=0.197531Jy sigma=0.001227 ! Inverting map and beam ! Estimated beam: bmin=0.9195 mas, bmaj=2.353 mas, bpa=-6.483 degrees ! Estimated noise=725.176 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021299 Jy ! Component: 100 - total flux cleaned = 0.00261355 Jy ! Component: 150 - total flux cleaned = 0.00280372 Jy ! Component: 200 - total flux cleaned = 0.00284364 Jy ! Total flux subtracted in 200 components = 0.00284364 Jy ! Clean residual min=-0.003695 max=0.003062 Jy/beam ! Clean residual mean=0.000005 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.58199 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 95 components and 0.58199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197503Jy sigma=0.001227 ! Fit after self-cal, rms=0.197445Jy sigma=0.001227 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.426 mas, bmaj=3.957 mas, bpa=8.929 degrees ! Estimated noise=922.568 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000695602 Jy ! Component: 100 - total flux cleaned = 0.00103216 Jy ! Component: 150 - total flux cleaned = 0.0012029 Jy ! Component: 200 - total flux cleaned = 0.00117594 Jy ! Total flux subtracted in 200 components = 0.00117594 Jy ! Clean residual min=-0.003284 max=0.003144 Jy/beam ! Clean residual mean=0.000004 rms=0.000946 Jy/beam ! Combined flux in latest and established models = 0.583166 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 106 components and 0.583166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197440Jy sigma=0.001227 ! Fit after self-cal, rms=0.197395Jy sigma=0.001226 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7685 mas, bmaj=2.007 mas, bpa=-4.489 degrees ! Estimated noise=1303.54 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.374984 Jy ! Component: 100 - total flux cleaned = 0.476772 Jy ! Component: 150 - total flux cleaned = 0.512331 Jy ! Component: 200 - total flux cleaned = 0.531225 Jy ! Total flux subtracted in 200 components = 0.531225 Jy ! Clean residual min=-0.008886 max=0.008947 Jy/beam ! Clean residual mean=0.000039 rms=0.002327 Jy/beam ! Combined flux in latest and established models = 0.531225 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.531225 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9195 mas, bmaj=2.353 mas, bpa=-6.483 degrees ! Estimated noise=725.176 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, -1.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0205397 Jy ! Component: 100 - total flux cleaned = 0.0316539 Jy ! Component: 150 - total flux cleaned = 0.0384412 Jy ! Component: 200 - total flux cleaned = 0.0427955 Jy ! Total flux subtracted in 200 components = 0.0427955 Jy ! Clean residual min=-0.003679 max=0.002931 Jy/beam ! Clean residual mean=0.000014 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.57402 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 78 components and 0.57402 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.426 mas, bmaj=3.957 mas, bpa=8.929 degrees ! Estimated noise=922.568 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00445192 Jy ! Component: 100 - total flux cleaned = 0.00544199 Jy ! Component: 150 - total flux cleaned = 0.00608654 Jy ! Component: 200 - total flux cleaned = 0.00652897 Jy ! Total flux subtracted in 200 components = 0.00652897 Jy ! Clean residual min=-0.003136 max=0.002654 Jy/beam ! Clean residual mean=0.000010 rms=0.000929 Jy/beam ! Combined flux in latest and established models = 0.580549 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 108 components and 0.580549 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9195 mas, bmaj=2.353 mas, bpa=-6.483 degrees ! Estimated noise=725.176 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183742 Jy ! Component: 100 - total flux cleaned = 0.000246221 Jy ! Component: 150 - total flux cleaned = 0.000349691 Jy ! Component: 200 - total flux cleaned = 0.000443617 Jy ! Total flux subtracted in 200 components = 0.000443617 Jy ! Clean residual min=-0.003520 max=0.002839 Jy/beam ! Clean residual mean=0.000006 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.580993 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 126 components and 0.580993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197293Jy sigma=0.001226 ! Fit after self-cal, rms=0.197257Jy sigma=0.001226 wmodel J0215-0222_X_1997_05_07_yyk\_map.mod ! Writing 126 model components to file: J0215-0222_X_1997_05_07_yyk_map.mod wobs J0215-0222_X_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J0215-0222_X_1997_05_07_yyk_uvs.fits wwins J0215-0222_X_1997_05_07_yyk\_map.win ! wwins: Wrote 3 windows to J0215-0222_X_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00130683 Jy ! Component: 100 - total flux cleaned = -0.00182095 Jy ! Component: 150 - total flux cleaned = -0.00201038 Jy ! Component: 200 - total flux cleaned = -0.00187823 Jy ! Component: 250 - total flux cleaned = -0.0016677 Jy ! Component: 300 - total flux cleaned = -0.00158823 Jy ! Component: 350 - total flux cleaned = -0.00139534 Jy ! Component: 400 - total flux cleaned = -0.00143329 Jy ! Component: 450 - total flux cleaned = -0.00150669 Jy ! Component: 500 - total flux cleaned = -0.00140009 Jy ! Component: 550 - total flux cleaned = -0.0014351 Jy ! Component: 600 - total flux cleaned = -0.00146863 Jy ! Component: 650 - total flux cleaned = -0.00143528 Jy ! Component: 700 - total flux cleaned = -0.00143511 Jy ! Component: 750 - total flux cleaned = -0.0013712 Jy ! Component: 800 - total flux cleaned = -0.00133993 Jy ! Component: 850 - total flux cleaned = -0.00130881 Jy ! Component: 900 - total flux cleaned = -0.00121794 Jy ! Component: 950 - total flux cleaned = -0.00118847 Jy ! Component: 1000 - total flux cleaned = -0.00113054 Jy ! Component: 1050 - total flux cleaned = -0.00104449 Jy ! Component: 1100 - total flux cleaned = -0.000903674 Jy ! Component: 1150 - total flux cleaned = -0.000875961 Jy ! Component: 1200 - total flux cleaned = -0.000766257 Jy ! Component: 1250 - total flux cleaned = -0.000685303 Jy ! Component: 1300 - total flux cleaned = -0.00052594 Jy ! Component: 1350 - total flux cleaned = -0.000499735 Jy ! Component: 1400 - total flux cleaned = -0.000370518 Jy ! Component: 1450 - total flux cleaned = -0.000396363 Jy ! Component: 1500 - total flux cleaned = -0.000320852 Jy ! Component: 1550 - total flux cleaned = -0.000295832 Jy ! Component: 1600 - total flux cleaned = -0.000198316 Jy ! Component: 1650 - total flux cleaned = -0.000174116 Jy ! Component: 1700 - total flux cleaned = -7.87337e-05 Jy ! Component: 1750 - total flux cleaned = 1.57514e-05 Jy ! Component: 1800 - total flux cleaned = 3.87911e-05 Jy ! Component: 1850 - total flux cleaned = 0.000176538 Jy ! Component: 1900 - total flux cleaned = 0.000153648 Jy ! Component: 1950 - total flux cleaned = 0.000176193 Jy ! Component: 2000 - total flux cleaned = 0.00017624 Jy ! Total flux subtracted in 2048 components = 0.000308204 Jy ! Clean residual min=-0.001620 max=0.001212 Jy/beam ! Clean residual mean=0.000003 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.581301 Jy keep ! Adding 134 model components to the UV plane model. ! The established model now contains 260 components and 0.581301 Jy ![Exited script file: muppet] wmap "J0215-0222_X_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9195 x 2.353 at -6.483 degrees (North through East) ! Clean map min=-0.0027273 max=0.41436 Jy/beam ! Writing clean map to FITS file: J0215-0222_X_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.414359 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000412349 device "J0215-0222_X_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J0215-0222_X_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.298545 0.298545 0.59709 1.19418 2.38836 4.77672 9.55344 19.1069 38.2137 76.4275 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.414 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9195 x 2.353 at -6.483 degrees (North through East) ! Clean map min=-0.0027273 max=0.41436 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0215-0222_X_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J0215-0222_X_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0215-0222_X_1997_05_07_yyk_uvs.log closed on Mon Jan 8 02:23:12 2007