! Started logfile: J0204-1701_S_1997_07_02_yyk_uvs.log on Sun Jan 7 15:47:10 2007 obs J0204-1701_S_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J0204-1701_S_1997_07_02_yyk_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1.95282 visibilities/baseline/integration-bin. ! Found source: J0204-1701 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 754 lines of history. ! ! Reading 51320 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0204-1701_S_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.32391 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.669 mas, bmaj=6.581 mas, bpa=-4.912 degrees ! Estimated noise=1791.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.04119 Jy ! Component: 100 - total flux cleaned = 1.28916 Jy ! Total flux subtracted in 100 components = 1.28916 Jy ! Clean residual min=-0.041254 max=0.063972 Jy/beam ! Clean residual mean=0.000726 rms=0.011453 Jy/beam ! Combined flux in latest and established models = 1.28916 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.28916 Jy ! ! Correcting IF 1. ! A total of 227 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.378221Jy sigma=0.002062 ! Fit after self-cal, rms=0.376339Jy sigma=0.002053 ! Inverting map and beam ! Estimated beam: bmin=2.669 mas, bmaj=6.581 mas, bpa=-4.912 degrees ! Estimated noise=1791.59 mJy/beam. ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0837622 Jy ! Component: 100 - total flux cleaned = 0.0941228 Jy ! Total flux subtracted in 100 components = 0.0941228 Jy ! Clean residual min=-0.029795 max=0.046453 Jy/beam ! Clean residual mean=0.000537 rms=0.008893 Jy/beam ! Combined flux in latest and established models = 1.38328 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 26 components and 1.38328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.357095Jy sigma=0.001961 ! Fit after self-cal, rms=0.356671Jy sigma=0.001958 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.556 mas, bmaj=8.977 mas, bpa=-6.211 degrees ! Estimated noise=767.711 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179241 Jy ! Component: 100 - total flux cleaned = 0.0179598 Jy ! Component: 150 - total flux cleaned = 0.0179812 Jy ! Component: 200 - total flux cleaned = 0.0179624 Jy ! Total flux subtracted in 200 components = 0.0179624 Jy ! Clean residual min=-0.030630 max=0.047424 Jy/beam ! Clean residual mean=0.000823 rms=0.009727 Jy/beam ! Combined flux in latest and established models = 1.40124 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 45 components and 1.40124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.353541Jy sigma=0.001944 ! Fit after self-cal, rms=0.353279Jy sigma=0.001943 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.556 x 8.977 at -6.211 degrees (North through East) ! Clean map min=-0.030879 max=1.1963 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02733 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.10 HN 0.92 KP 0.90 ! LA 0.99 MK 1.00 NL 1.00* OV 1.07 ! PT 0.95 SC 0.79 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.982727 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.16 HN 1.00 KP 0.95 ! LA 1.09 MK 1.04 NL 0.98 OV 1.04 ! PT 0.93 SC 0.91 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.04088 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.08 HN 0.95 KP 0.92 ! LA 0.82 MK 0.87 NL 0.96 OV 0.94 ! PT 1.07 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.988219 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.12 HN 1.13 KP 0.95 ! LA 0.90 MK 1.03 NL 1.07 OV 0.95 ! PT 0.91 SC 1.00 ! ! ! Fit before self-cal, rms=0.353279Jy sigma=0.001943 ! Fit after self-cal, rms=0.321214Jy sigma=0.001785 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321214Jy sigma=0.001785 ! Fit after self-cal, rms=0.321215Jy sigma=0.001785 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.502 mas, bmaj=8.825 mas, bpa=-5.41 degrees ! Estimated noise=770.752 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, 14.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0357506 Jy ! Component: 100 - total flux cleaned = 0.0477586 Jy ! Component: 150 - total flux cleaned = 0.0501326 Jy ! Component: 200 - total flux cleaned = 0.0517381 Jy ! Total flux subtracted in 200 components = 0.0517381 Jy ! Clean residual min=-0.010287 max=0.011861 Jy/beam ! Clean residual mean=-0.000017 rms=0.002850 Jy/beam ! Combined flux in latest and established models = 1.45298 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 68 components and 1.45298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317922Jy sigma=0.001767 ! Fit after self-cal, rms=0.317541Jy sigma=0.001765 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317541Jy sigma=0.001765 ! Fit after self-cal, rms=0.313568Jy sigma=0.001743 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00689491 Jy ! Component: 100 - total flux cleaned = 0.00802103 Jy ! Component: 150 - total flux cleaned = 0.00849654 Jy ! Component: 200 - total flux cleaned = 0.00849925 Jy ! Total flux subtracted in 200 components = 0.00849925 Jy ! Clean residual min=-0.010591 max=0.010036 Jy/beam ! Clean residual mean=-0.000058 rms=0.002620 Jy/beam ! Combined flux in latest and established models = 1.46148 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 87 components and 1.46148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313080Jy sigma=0.001740 ! Fit after self-cal, rms=0.312382Jy sigma=0.001737 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.502 x 8.825 at -5.41 degrees (North through East) ! Clean map min=-0.010699 max=1.2024 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.312382Jy sigma=0.001737 ! Fit after self-cal, rms=0.300831Jy sigma=0.001688 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.300831Jy sigma=0.001688 ! Fit after self-cal, rms=0.300650Jy sigma=0.001687 ! Inverting map and beam ! Estimated beam: bmin=3.49 mas, bmaj=8.835 mas, bpa=-5.631 degrees ! Estimated noise=767.793 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114422 Jy ! Component: 100 - total flux cleaned = 0.0116605 Jy ! Component: 150 - total flux cleaned = 0.0116619 Jy ! Component: 200 - total flux cleaned = 0.0113767 Jy ! Total flux subtracted in 200 components = 0.0113767 Jy ! Clean residual min=-0.007370 max=0.006501 Jy/beam ! Clean residual mean=-0.000063 rms=0.001670 Jy/beam ! Combined flux in latest and established models = 1.47286 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 110 components and 1.47286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.300274Jy sigma=0.001685 ! Fit after self-cal, rms=0.300155Jy sigma=0.001685 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.300155Jy sigma=0.001685 ! Fit after self-cal, rms=0.299699Jy sigma=0.001682 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.299699Jy sigma=0.001682 ! Fit after self-cal, rms=0.299670Jy sigma=0.001682 ! Inverting map and beam ! Estimated beam: bmin=3.485 mas, bmaj=8.824 mas, bpa=-5.7 degrees ! Estimated noise=767.886 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00570905 Jy ! Component: 100 - total flux cleaned = 0.00584841 Jy ! Component: 150 - total flux cleaned = 0.00560064 Jy ! Component: 200 - total flux cleaned = 0.00560062 Jy ! Total flux subtracted in 200 components = 0.00560062 Jy ! Clean residual min=-0.006938 max=0.005960 Jy/beam ! Clean residual mean=-0.000050 rms=0.001527 Jy/beam ! Combined flux in latest and established models = 1.47846 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 131 components and 1.47846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.299528Jy sigma=0.001681 ! Fit after self-cal, rms=0.299487Jy sigma=0.001681 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.253 mas, bmaj=16.45 mas, bpa=-0.119 degrees ! Estimated noise=954.486 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 5.59789e-05 Jy ! Component: 100 - total flux cleaned = -0.000524465 Jy ! Component: 150 - total flux cleaned = -0.000744363 Jy ! Component: 200 - total flux cleaned = -0.000803809 Jy ! Total flux subtracted in 200 components = -0.000803809 Jy ! Clean residual min=-0.005650 max=0.005167 Jy/beam ! Clean residual mean=-0.000089 rms=0.001822 Jy/beam ! Combined flux in latest and established models = 1.47766 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 143 components and 1.47766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.299460Jy sigma=0.001681 ! Fit after self-cal, rms=0.299432Jy sigma=0.001681 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.652 mas, bmaj=6.524 mas, bpa=-4.636 degrees ! Estimated noise=1774.23 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.03788 Jy ! Component: 100 - total flux cleaned = 1.29271 Jy ! Component: 150 - total flux cleaned = 1.38211 Jy ! Component: 200 - total flux cleaned = 1.42795 Jy ! Total flux subtracted in 200 components = 1.42795 Jy ! Clean residual min=-0.017094 max=0.017216 Jy/beam ! Clean residual mean=0.000115 rms=0.003873 Jy/beam ! Combined flux in latest and established models = 1.42795 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 1.42795 Jy ! Inverting map and beam ! Estimated beam: bmin=3.485 mas, bmaj=8.824 mas, bpa=-5.7 degrees ! Estimated noise=767.886 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0333629 Jy ! Component: 100 - total flux cleaned = 0.0406724 Jy ! Component: 150 - total flux cleaned = 0.0447622 Jy ! Component: 200 - total flux cleaned = 0.045546 Jy ! Total flux subtracted in 200 components = 0.045546 Jy ! Clean residual min=-0.006879 max=0.006851 Jy/beam ! Clean residual mean=-0.000032 rms=0.001775 Jy/beam ! Combined flux in latest and established models = 1.47349 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 59 components and 1.47349 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.253 mas, bmaj=16.45 mas, bpa=-0.119 degrees ! Estimated noise=954.486 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00369063 Jy ! Component: 100 - total flux cleaned = 0.00369373 Jy ! Component: 150 - total flux cleaned = 0.00361917 Jy ! Component: 200 - total flux cleaned = 0.00361927 Jy ! Total flux subtracted in 200 components = 0.00361927 Jy ! Clean residual min=-0.005718 max=0.005264 Jy/beam ! Clean residual mean=-0.000086 rms=0.001841 Jy/beam ! Combined flux in latest and established models = 1.47711 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 66 components and 1.47711 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.485 mas, bmaj=8.824 mas, bpa=-5.7 degrees ! Estimated noise=767.886 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000631281 Jy ! Component: 100 - total flux cleaned = -0.000415995 Jy ! Component: 150 - total flux cleaned = -1.49543e-05 Jy ! Component: 200 - total flux cleaned = 0.000166286 Jy ! Total flux subtracted in 200 components = 0.000166286 Jy ! Clean residual min=-0.006342 max=0.006529 Jy/beam ! Clean residual mean=-0.000047 rms=0.001544 Jy/beam ! Combined flux in latest and established models = 1.47728 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 83 components and 1.47728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.299614Jy sigma=0.001681 ! Fit after self-cal, rms=0.299549Jy sigma=0.001681 wmodel J0204-1701_S_1997_07_02_yyk\_map.mod ! Writing 83 model components to file: J0204-1701_S_1997_07_02_yyk_map.mod wobs J0204-1701_S_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J0204-1701_S_1997_07_02_yyk_uvs.fits wwins J0204-1701_S_1997_07_02_yyk\_map.win ! wwins: Wrote 2 windows to J0204-1701_S_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 6.07494e-05 Jy ! Component: 100 - total flux cleaned = -0.00119367 Jy ! Component: 150 - total flux cleaned = -0.0010263 Jy ! Component: 200 - total flux cleaned = -0.000868403 Jy ! Component: 250 - total flux cleaned = -0.00101691 Jy ! Component: 300 - total flux cleaned = -0.00108914 Jy ! Component: 350 - total flux cleaned = -0.00102079 Jy ! Component: 400 - total flux cleaned = -0.00088636 Jy ! Component: 450 - total flux cleaned = -0.000689494 Jy ! Component: 500 - total flux cleaned = -0.000499318 Jy ! Component: 550 - total flux cleaned = -0.000314959 Jy ! Component: 600 - total flux cleaned = 4.71971e-05 Jy ! Component: 650 - total flux cleaned = 0.000460267 Jy ! Component: 700 - total flux cleaned = 0.000922998 Jy ! Component: 750 - total flux cleaned = 0.00115048 Jy ! Component: 800 - total flux cleaned = 0.00142953 Jy ! Component: 850 - total flux cleaned = 0.00159393 Jy ! Component: 900 - total flux cleaned = 0.0017558 Jy ! Component: 950 - total flux cleaned = 0.00191518 Jy ! Component: 1000 - total flux cleaned = 0.00212347 Jy ! Component: 1050 - total flux cleaned = 0.00222554 Jy ! Component: 1100 - total flux cleaned = 0.00247667 Jy ! Component: 1150 - total flux cleaned = 0.00252575 Jy ! Component: 1200 - total flux cleaned = 0.00276925 Jy ! Component: 1250 - total flux cleaned = 0.00281672 Jy ! Component: 1300 - total flux cleaned = 0.00291171 Jy ! Component: 1350 - total flux cleaned = 0.00323853 Jy ! Component: 1400 - total flux cleaned = 0.0033765 Jy ! Component: 1450 - total flux cleaned = 0.00373979 Jy ! Component: 1500 - total flux cleaned = 0.00396324 Jy ! Component: 1550 - total flux cleaned = 0.00418466 Jy ! Component: 1600 - total flux cleaned = 0.00453396 Jy ! Component: 1650 - total flux cleaned = 0.00479279 Jy ! Component: 1700 - total flux cleaned = 0.00496323 Jy ! Component: 1750 - total flux cleaned = 0.00513143 Jy ! Component: 1800 - total flux cleaned = 0.00558855 Jy ! Component: 1850 - total flux cleaned = 0.00579348 Jy ! Component: 1900 - total flux cleaned = 0.00619888 Jy ! Component: 1950 - total flux cleaned = 0.00635898 Jy ! Component: 2000 - total flux cleaned = 0.00651791 Jy ! Total flux subtracted in 2048 components = 0.00671376 Jy ! Clean residual min=-0.002030 max=0.002022 Jy/beam ! Clean residual mean=-0.000012 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 1.48399 Jy keep ! Adding 125 model components to the UV plane model. ! The established model now contains 206 components and 1.48399 Jy ![Exited script file: muppet] wmap "J0204-1701_S_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.485 x 8.824 at -5.7 degrees (North through East) ! Clean map min=-0.004528 max=1.198 Jy/beam ! Writing clean map to FITS file: J0204-1701_S_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.19799 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00081297 device "J0204-1701_S_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J0204-1701_S_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.203584 0.203584 0.407168 0.814337 1.62867 3.25735 6.5147 13.0294 26.0588 52.1176 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.197 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.485 x 8.824 at -5.7 degrees (North through East) ! Clean map min=-0.004528 max=1.198 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0204-1701_S_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J0204-1701_S_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0204-1701_S_1997_07_02_yyk_uvs.log closed on Sun Jan 7 15:47:18 2007