! Started logfile: J0145-2733_S_1997_08_27_yyk_uvs.log on Sun Jan 7 15:43:12 2007 obs J0145-2733_S_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J0145-2733_S_1997_08_27_yyk_uva.fits ! AN table 1: 142 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.909859 visibilities/baseline/integration-bin. ! Found source: J0145-2733 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 702 lines of history. ! ! Reading 23256 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0145-2733_S_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.736407 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.633 mas, bmaj=6.536 mas, bpa=-1.51 degrees ! Estimated noise=2749.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.439495 Jy ! Component: 100 - total flux cleaned = 0.54824 Jy ! Total flux subtracted in 100 components = 0.54824 Jy ! Clean residual min=-0.048872 max=0.063887 Jy/beam ! Clean residual mean=-0.000360 rms=0.016162 Jy/beam ! Combined flux in latest and established models = 0.54824 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.54824 Jy ! ! Correcting IF 1. ! A total of 515 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.440763Jy sigma=0.001515 ! Fit after self-cal, rms=0.406564Jy sigma=0.001355 ! Inverting map and beam ! Estimated beam: bmin=2.633 mas, bmaj=6.536 mas, bpa=-1.51 degrees ! Estimated noise=2749.09 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.427 mas, bmaj=8.674 mas, bpa=-5.544 degrees ! Estimated noise=1350.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.121285 Jy ! Component: 100 - total flux cleaned = 0.156909 Jy ! Component: 150 - total flux cleaned = 0.164369 Jy ! Component: 200 - total flux cleaned = 0.16571 Jy ! Total flux subtracted in 200 components = 0.16571 Jy ! Clean residual min=-0.016311 max=0.030779 Jy/beam ! Clean residual mean=0.000398 rms=0.005942 Jy/beam ! Combined flux in latest and established models = 0.71395 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 33 components and 0.71395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.379592Jy sigma=0.001263 ! Fit after self-cal, rms=0.379553Jy sigma=0.001263 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.427 x 8.674 at -5.544 degrees (North through East) ! Clean map min=-0.016268 max=0.58802 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00774 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.07 HN 1.20 KP 0.90 ! LA 0.98 MK 0.99 NL 1.00* OV 1.09 ! PT 0.96 SC 0.81 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.968948 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.14 HN 1.31 KP 0.93 ! LA 1.06 MK 1.05 NL 0.99 OV 1.05 ! PT 0.92 SC 0.87 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02686 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.04 HN 1.28 KP 0.91 ! LA 0.80 MK 0.86 NL 0.97 OV 0.93 ! PT 1.07 SC 0.95 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.974523 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.12 HN 1.49 KP 0.94 ! LA 0.87 MK 1.00 NL 1.10 OV 0.94 ! PT 0.92 SC 0.93 ! ! ! Fit before self-cal, rms=0.379553Jy sigma=0.001263 ! Fit after self-cal, rms=0.364277Jy sigma=0.001226 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.364277Jy sigma=0.001226 ! Fit after self-cal, rms=0.364287Jy sigma=0.001226 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.4 mas, bmaj=8.296 mas, bpa=-3.446 degrees ! Estimated noise=1304.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.5, 1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00900755 Jy ! Component: 100 - total flux cleaned = 0.00962315 Jy ! Component: 150 - total flux cleaned = 0.00963656 Jy ! Component: 200 - total flux cleaned = 0.00927416 Jy ! Total flux subtracted in 200 components = 0.00927416 Jy ! Clean residual min=-0.012265 max=0.013470 Jy/beam ! Clean residual mean=-0.000188 rms=0.003145 Jy/beam ! Combined flux in latest and established models = 0.723224 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 62 components and 0.723224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.362639Jy sigma=0.001221 ! Fit after self-cal, rms=0.362433Jy sigma=0.001220 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.362433Jy sigma=0.001220 ! Fit after self-cal, rms=0.360161Jy sigma=0.001212 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00551924 Jy ! Component: 100 - total flux cleaned = 0.00608375 Jy ! Component: 150 - total flux cleaned = 0.00585678 Jy ! Component: 200 - total flux cleaned = 0.00541872 Jy ! Total flux subtracted in 200 components = 0.00541872 Jy ! Clean residual min=-0.010928 max=0.011605 Jy/beam ! Clean residual mean=-0.000219 rms=0.003023 Jy/beam ! Combined flux in latest and established models = 0.728642 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 81 components and 0.728642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.359552Jy sigma=0.001211 ! Fit after self-cal, rms=0.359233Jy sigma=0.001210 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.4 x 8.296 at -3.446 degrees (North through East) ! Clean map min=-0.011685 max=0.57601 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.359233Jy sigma=0.001210 ! Fit after self-cal, rms=1.187637Jy sigma=0.001179 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.187637Jy sigma=0.001179 ! Fit after self-cal, rms=1.187686Jy sigma=0.001179 ! Inverting map and beam ! Estimated beam: bmin=3.365 mas, bmaj=8.27 mas, bpa=-3.818 degrees ! Estimated noise=1293.49 mJy/beam. ! Added new window around map position (4, 3.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00986631 Jy ! Component: 100 - total flux cleaned = 0.00925999 Jy ! Component: 150 - total flux cleaned = 0.00901473 Jy ! Component: 200 - total flux cleaned = 0.00840603 Jy ! Total flux subtracted in 200 components = 0.00840603 Jy ! Clean residual min=-0.006075 max=0.007486 Jy/beam ! Clean residual mean=-0.000189 rms=0.001896 Jy/beam ! Combined flux in latest and established models = 0.737048 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 118 components and 0.737049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.187573Jy sigma=0.001177 ! Fit after self-cal, rms=1.187478Jy sigma=0.001177 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.187478Jy sigma=0.001177 ! Fit after self-cal, rms=1.120952Jy sigma=0.001175 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.120952Jy sigma=0.001175 ! Fit after self-cal, rms=1.121051Jy sigma=0.001175 ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=8.281 mas, bpa=-3.624 degrees ! Estimated noise=1293.84 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0060355 Jy ! Component: 100 - total flux cleaned = 0.00584702 Jy ! Component: 150 - total flux cleaned = 0.00584899 Jy ! Component: 200 - total flux cleaned = 0.00570799 Jy ! Total flux subtracted in 200 components = 0.00570799 Jy ! Clean residual min=-0.005460 max=0.006592 Jy/beam ! Clean residual mean=-0.000169 rms=0.001693 Jy/beam ! Combined flux in latest and established models = 0.742756 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 136 components and 0.742757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.121008Jy sigma=0.001174 ! Fit after self-cal, rms=1.120898Jy sigma=0.001174 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.532 mas, bmaj=19.42 mas, bpa=3.887 degrees ! Estimated noise=1635.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104983 Jy ! Component: 100 - total flux cleaned = 0.00130332 Jy ! Component: 150 - total flux cleaned = 0.00130585 Jy ! Component: 200 - total flux cleaned = 0.00130998 Jy ! Total flux subtracted in 200 components = 0.00130998 Jy ! Clean residual min=-0.006417 max=0.005614 Jy/beam ! Clean residual mean=-0.000338 rms=0.001971 Jy/beam ! Combined flux in latest and established models = 0.744067 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 143 components and 0.744067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.120910Jy sigma=0.001174 ! Fit after self-cal, rms=1.120777Jy sigma=0.001174 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.596 mas, bmaj=6.3 mas, bpa=-0.06634 degrees ! Estimated noise=2301.52 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.477947 Jy ! Component: 100 - total flux cleaned = 0.607813 Jy ! Component: 150 - total flux cleaned = 0.665983 Jy ! Component: 200 - total flux cleaned = 0.697287 Jy ! Total flux subtracted in 200 components = 0.697287 Jy ! Clean residual min=-0.013415 max=0.014840 Jy/beam ! Clean residual mean=-0.000047 rms=0.004041 Jy/beam ! Combined flux in latest and established models = 0.697287 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.697287 Jy ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=8.281 mas, bpa=-3.624 degrees ! Estimated noise=1293.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0242007 Jy ! Component: 100 - total flux cleaned = 0.0371933 Jy ! Component: 150 - total flux cleaned = 0.0441167 Jy ! Component: 200 - total flux cleaned = 0.0455975 Jy ! Total flux subtracted in 200 components = 0.0455975 Jy ! Clean residual min=-0.005795 max=0.006934 Jy/beam ! Clean residual mean=-0.000167 rms=0.001827 Jy/beam ! Combined flux in latest and established models = 0.742885 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 71 components and 0.742884 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.532 mas, bmaj=19.42 mas, bpa=3.887 degrees ! Estimated noise=1635.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00333627 Jy ! Component: 100 - total flux cleaned = 0.00370777 Jy ! Component: 150 - total flux cleaned = 0.00368936 Jy ! Component: 200 - total flux cleaned = 0.00368477 Jy ! Total flux subtracted in 200 components = 0.00368477 Jy ! Clean residual min=-0.006545 max=0.005525 Jy/beam ! Clean residual mean=-0.000348 rms=0.002011 Jy/beam ! Combined flux in latest and established models = 0.746569 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 85 components and 0.746569 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=8.281 mas, bpa=-3.624 degrees ! Estimated noise=1293.84 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000720944 Jy ! Component: 100 - total flux cleaned = 0.000722811 Jy ! Component: 150 - total flux cleaned = 0.000581799 Jy ! Component: 200 - total flux cleaned = 0.000577168 Jy ! Total flux subtracted in 200 components = 0.000577168 Jy ! Clean residual min=-0.005202 max=0.005778 Jy/beam ! Clean residual mean=-0.000189 rms=0.001672 Jy/beam ! Combined flux in latest and established models = 0.747146 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 101 components and 0.747146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.120666Jy sigma=0.001174 ! Fit after self-cal, rms=1.120574Jy sigma=0.001174 wmodel J0145-2733_S_1997_08_27_yyk\_map.mod ! Writing 101 model components to file: J0145-2733_S_1997_08_27_yyk_map.mod wobs J0145-2733_S_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J0145-2733_S_1997_08_27_yyk_uvs.fits wwins J0145-2733_S_1997_08_27_yyk\_map.win ! wwins: Wrote 3 windows to J0145-2733_S_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000177107 Jy ! Component: 100 - total flux cleaned = -0.000465007 Jy ! Component: 150 - total flux cleaned = -0.000643812 Jy ! Component: 200 - total flux cleaned = -0.00089545 Jy ! Component: 250 - total flux cleaned = -0.00113677 Jy ! Component: 300 - total flux cleaned = -0.00121282 Jy ! Component: 350 - total flux cleaned = -0.00144078 Jy ! Component: 400 - total flux cleaned = -0.00166036 Jy ! Component: 450 - total flux cleaned = -0.00187486 Jy ! Component: 500 - total flux cleaned = -0.00229135 Jy ! Component: 550 - total flux cleaned = -0.00256128 Jy ! Component: 600 - total flux cleaned = -0.00275867 Jy ! Component: 650 - total flux cleaned = -0.00301585 Jy ! Component: 700 - total flux cleaned = -0.00320328 Jy ! Component: 750 - total flux cleaned = -0.00320279 Jy ! Component: 800 - total flux cleaned = -0.00338499 Jy ! Component: 850 - total flux cleaned = -0.00362283 Jy ! Component: 900 - total flux cleaned = -0.00391443 Jy ! Component: 950 - total flux cleaned = -0.00414312 Jy ! Component: 1000 - total flux cleaned = -0.00442503 Jy ! Component: 1050 - total flux cleaned = -0.00459162 Jy ! Component: 1100 - total flux cleaned = -0.00502709 Jy ! Component: 1150 - total flux cleaned = -0.0049732 Jy ! Component: 1200 - total flux cleaned = -0.0053445 Jy ! Component: 1250 - total flux cleaned = -0.00555304 Jy ! Component: 1300 - total flux cleaned = -0.00581072 Jy ! Component: 1350 - total flux cleaned = -0.00601337 Jy ! Component: 1400 - total flux cleaned = -0.00636424 Jy ! Component: 1450 - total flux cleaned = -0.00666091 Jy ! Component: 1500 - total flux cleaned = -0.00695395 Jy ! Component: 1550 - total flux cleaned = -0.00724253 Jy ! Component: 1600 - total flux cleaned = -0.00752807 Jy ! Component: 1650 - total flux cleaned = -0.00776333 Jy ! Component: 1700 - total flux cleaned = -0.00804148 Jy ! Component: 1750 - total flux cleaned = -0.00831611 Jy ! Component: 1800 - total flux cleaned = -0.00854208 Jy ! Component: 1850 - total flux cleaned = -0.00872151 Jy ! Component: 1900 - total flux cleaned = -0.0089866 Jy ! Component: 1950 - total flux cleaned = -0.00911774 Jy ! Component: 2000 - total flux cleaned = -0.00929146 Jy ! Total flux subtracted in 2048 components = -0.00959202 Jy ! Clean residual min=-0.003299 max=0.003306 Jy/beam ! Clean residual mean=-0.000142 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 0.737554 Jy keep ! Adding 126 model components to the UV plane model. ! The established model now contains 227 components and 0.737554 Jy ![Exited script file: muppet] wmap "J0145-2733_S_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.35 x 8.281 at -3.624 degrees (North through East) ! Clean map min=-0.0046059 max=0.56455 Jy/beam ! Writing clean map to FITS file: J0145-2733_S_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.56455 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000880016 device "J0145-2733_S_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J0145-2733_S_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.467637 0.467637 0.935275 1.87055 3.7411 7.4822 14.9644 29.9288 59.8576 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.564 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.35 x 8.281 at -3.624 degrees (North through East) ! Clean map min=-0.0046059 max=0.56455 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0145-2733_S_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J0145-2733_S_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0145-2733_S_1997_08_27_yyk_uvs.log closed on Sun Jan 7 15:43:19 2007