! Started logfile: J0138-0540_X_1997_05_07_yyk_uvs.log on Mon Jan 8 02:12:19 2007 obs J0138-0540_X_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J0138-0540_X_1997_05_07_yyk_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.78534 visibilities/baseline/integration-bin. ! Found source: J0138-0540 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 613 lines of history. ! ! Reading 20356 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0138-0540_X_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.276761 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8002 mas, bmaj=1.951 mas, bpa=-3.148 degrees ! Estimated noise=1264.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.155966 Jy ! Component: 100 - total flux cleaned = 0.18649 Jy ! Total flux subtracted in 100 components = 0.18649 Jy ! Clean residual min=-0.011057 max=0.014013 Jy/beam ! Clean residual mean=0.000064 rms=0.003071 Jy/beam ! Combined flux in latest and established models = 0.18649 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.18649 Jy ! ! Correcting IF 1. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.208646Jy sigma=0.001247 ! Fit after self-cal, rms=0.208341Jy sigma=0.001246 ! Inverting map and beam ! Estimated beam: bmin=0.8002 mas, bmaj=1.951 mas, bpa=-3.148 degrees ! Estimated noise=1264.57 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9555 mas, bmaj=2.375 mas, bpa=-4.123 degrees ! Estimated noise=777.715 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.2, -2.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0225587 Jy ! Component: 100 - total flux cleaned = 0.0325931 Jy ! Component: 150 - total flux cleaned = 0.0385629 Jy ! Component: 200 - total flux cleaned = 0.0423027 Jy ! Total flux subtracted in 200 components = 0.0423027 Jy ! Clean residual min=-0.006145 max=0.010296 Jy/beam ! Clean residual mean=0.000065 rms=0.001906 Jy/beam ! Combined flux in latest and established models = 0.228793 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 49 components and 0.228793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206961Jy sigma=0.001234 ! Fit after self-cal, rms=0.206694Jy sigma=0.001232 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9555 x 2.375 at -4.123 degrees (North through East) ! Clean map min=-0.0045376 max=0.17496 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.206694Jy sigma=0.001232 ! Fit after self-cal, rms=0.206694Jy sigma=0.001232 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206694Jy sigma=0.001232 ! Fit after self-cal, rms=0.206693Jy sigma=0.001232 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9555 mas, bmaj=2.375 mas, bpa=-4.123 degrees ! Estimated noise=777.715 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00675843 Jy ! Component: 100 - total flux cleaned = 0.00857227 Jy ! Component: 150 - total flux cleaned = 0.00916482 Jy ! Component: 200 - total flux cleaned = 0.00956916 Jy ! Total flux subtracted in 200 components = 0.00956916 Jy ! Clean residual min=-0.004660 max=0.005547 Jy/beam ! Clean residual mean=0.000045 rms=0.001503 Jy/beam ! Combined flux in latest and established models = 0.238362 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 43 model components to the UV plane model. ! The established model now contains 83 components and 0.238362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206489Jy sigma=0.001231 ! Fit after self-cal, rms=0.206449Jy sigma=0.001231 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206449Jy sigma=0.001231 ! Fit after self-cal, rms=0.201305Jy sigma=0.001205 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00471226 Jy ! Component: 100 - total flux cleaned = 0.00623334 Jy ! Component: 150 - total flux cleaned = 0.00647402 Jy ! Component: 200 - total flux cleaned = 0.00662892 Jy ! Total flux subtracted in 200 components = 0.00662892 Jy ! Clean residual min=-0.003511 max=0.004869 Jy/beam ! Clean residual mean=0.000044 rms=0.001201 Jy/beam ! Combined flux in latest and established models = 0.244991 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 104 components and 0.244991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201250Jy sigma=0.001204 ! Fit after self-cal, rms=0.200594Jy sigma=0.001201 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9555 x 2.375 at -4.123 degrees (North through East) ! Clean map min=-0.0032736 max=0.17453 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200594Jy sigma=0.001201 ! Fit after self-cal, rms=0.207326Jy sigma=0.001199 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207326Jy sigma=0.001199 ! Fit after self-cal, rms=0.207207Jy sigma=0.001198 ! Inverting map and beam ! Estimated beam: bmin=0.9509 mas, bmaj=2.373 mas, bpa=-4.199 degrees ! Estimated noise=773.724 mJy/beam. ! Added new window around map position (-4.8, -3.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423196 Jy ! Component: 100 - total flux cleaned = 0.00423848 Jy ! Component: 150 - total flux cleaned = 0.00408227 Jy ! Component: 200 - total flux cleaned = 0.00401875 Jy ! Total flux subtracted in 200 components = 0.00401875 Jy ! Clean residual min=-0.002944 max=0.002926 Jy/beam ! Clean residual mean=-0.000006 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.24901 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 134 components and 0.24901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207091Jy sigma=0.001198 ! Fit after self-cal, rms=0.207058Jy sigma=0.001198 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207058Jy sigma=0.001198 ! Fit after self-cal, rms=0.206371Jy sigma=0.001196 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206371Jy sigma=0.001196 ! Fit after self-cal, rms=0.206367Jy sigma=0.001196 ! Inverting map and beam ! Estimated beam: bmin=0.9539 mas, bmaj=2.383 mas, bpa=-4.315 degrees ! Estimated noise=770.035 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111139 Jy ! Component: 100 - total flux cleaned = -5.16487e-05 Jy ! Component: 150 - total flux cleaned = -0.000237678 Jy ! Component: 200 - total flux cleaned = -0.000316995 Jy ! Total flux subtracted in 200 components = -0.000316995 Jy ! Clean residual min=-0.002715 max=0.002690 Jy/beam ! Clean residual mean=0.000011 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.248693 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 147 components and 0.248693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206341Jy sigma=0.001196 ! Fit after self-cal, rms=0.206341Jy sigma=0.001196 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.356 mas, bmaj=4.044 mas, bpa=9.103 degrees ! Estimated noise=962.766 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000152016 Jy ! Component: 100 - total flux cleaned = 0.000257258 Jy ! Component: 150 - total flux cleaned = 0.000321615 Jy ! Component: 200 - total flux cleaned = 0.000378889 Jy ! Total flux subtracted in 200 components = 0.000378889 Jy ! Clean residual min=-0.003132 max=0.002507 Jy/beam ! Clean residual mean=0.000018 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.249071 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 156 components and 0.249071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206335Jy sigma=0.001196 ! Fit after self-cal, rms=0.206335Jy sigma=0.001196 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.799 mas, bmaj=1.948 mas, bpa=-3.244 degrees ! Estimated noise=1256.87 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.159421 Jy ! Component: 100 - total flux cleaned = 0.195582 Jy ! Component: 150 - total flux cleaned = 0.212841 Jy ! Component: 200 - total flux cleaned = 0.223667 Jy ! Total flux subtracted in 200 components = 0.223667 Jy ! Clean residual min=-0.006803 max=0.005624 Jy/beam ! Clean residual mean=0.000014 rms=0.001609 Jy/beam ! Combined flux in latest and established models = 0.223667 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.223667 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9539 mas, bmaj=2.383 mas, bpa=-4.315 degrees ! Estimated noise=770.035 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100786 Jy ! Component: 100 - total flux cleaned = 0.0156829 Jy ! Component: 150 - total flux cleaned = 0.0193394 Jy ! Component: 200 - total flux cleaned = 0.0209148 Jy ! Total flux subtracted in 200 components = 0.0209148 Jy ! Clean residual min=-0.002754 max=0.002791 Jy/beam ! Clean residual mean=0.000020 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.244581 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 94 components and 0.244581 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.356 mas, bmaj=4.044 mas, bpa=9.103 degrees ! Estimated noise=962.766 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197379 Jy ! Component: 100 - total flux cleaned = 0.00252854 Jy ! Component: 150 - total flux cleaned = 0.00298382 Jy ! Component: 200 - total flux cleaned = 0.00336369 Jy ! Total flux subtracted in 200 components = 0.00336369 Jy ! Clean residual min=-0.003221 max=0.002506 Jy/beam ! Clean residual mean=0.000023 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.247945 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 117 components and 0.247945 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9539 mas, bmaj=2.383 mas, bpa=-4.315 degrees ! Estimated noise=770.035 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000223249 Jy ! Component: 100 - total flux cleaned = 0.000282035 Jy ! Component: 150 - total flux cleaned = 0.000329827 Jy ! Component: 200 - total flux cleaned = 0.000287178 Jy ! Total flux subtracted in 200 components = 0.000287178 Jy ! Clean residual min=-0.002698 max=0.002592 Jy/beam ! Clean residual mean=0.000011 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.248232 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 140 components and 0.248232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206339Jy sigma=0.001196 ! Fit after self-cal, rms=0.206335Jy sigma=0.001196 wmodel J0138-0540_X_1997_05_07_yyk\_map.mod ! Writing 140 model components to file: J0138-0540_X_1997_05_07_yyk_map.mod wobs J0138-0540_X_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J0138-0540_X_1997_05_07_yyk_uvs.fits wwins J0138-0540_X_1997_05_07_yyk\_map.win ! wwins: Wrote 3 windows to J0138-0540_X_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00035631 Jy ! Component: 100 - total flux cleaned = -0.000533474 Jy ! Component: 150 - total flux cleaned = -0.000533013 Jy ! Component: 200 - total flux cleaned = -0.000649314 Jy ! Component: 250 - total flux cleaned = -0.000649327 Jy ! Component: 300 - total flux cleaned = -0.000649224 Jy ! Component: 350 - total flux cleaned = -0.000719015 Jy ! Component: 400 - total flux cleaned = -0.000685651 Jy ! Component: 450 - total flux cleaned = -0.000718481 Jy ! Component: 500 - total flux cleaned = -0.000750675 Jy ! Component: 550 - total flux cleaned = -0.000781376 Jy ! Component: 600 - total flux cleaned = -0.000720946 Jy ! Component: 650 - total flux cleaned = -0.000720243 Jy ! Component: 700 - total flux cleaned = -0.000633603 Jy ! Component: 750 - total flux cleaned = -0.00052035 Jy ! Component: 800 - total flux cleaned = -0.000464938 Jy ! Component: 850 - total flux cleaned = -0.000383152 Jy ! Component: 900 - total flux cleaned = -0.000436589 Jy ! Component: 950 - total flux cleaned = -0.000331198 Jy ! Component: 1000 - total flux cleaned = -0.000331465 Jy ! Component: 1050 - total flux cleaned = -0.000178612 Jy ! Component: 1100 - total flux cleaned = -0.000229036 Jy ! Component: 1150 - total flux cleaned = -0.000129775 Jy ! Component: 1200 - total flux cleaned = -0.000105367 Jy ! Component: 1250 - total flux cleaned = -3.2847e-05 Jy ! Component: 1300 - total flux cleaned = 6.21925e-05 Jy ! Component: 1350 - total flux cleaned = 0.000108559 Jy ! Component: 1400 - total flux cleaned = 0.00020087 Jy ! Component: 1450 - total flux cleaned = 0.000291904 Jy ! Component: 1500 - total flux cleaned = 0.000427339 Jy ! Component: 1550 - total flux cleaned = 0.000604341 Jy ! Component: 1600 - total flux cleaned = 0.000648019 Jy ! Component: 1650 - total flux cleaned = 0.00071299 Jy ! Component: 1700 - total flux cleaned = 0.000883981 Jy ! Component: 1750 - total flux cleaned = 0.000947215 Jy ! Component: 1800 - total flux cleaned = 0.0011135 Jy ! Component: 1850 - total flux cleaned = 0.00115466 Jy ! Component: 1900 - total flux cleaned = 0.00123626 Jy ! Component: 1950 - total flux cleaned = 0.00133686 Jy ! Component: 2000 - total flux cleaned = 0.00151591 Jy ! Total flux subtracted in 2048 components = 0.00151555 Jy ! Clean residual min=-0.001317 max=0.000994 Jy/beam ! Clean residual mean=0.000011 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.249748 Jy keep ! Adding 134 model components to the UV plane model. ! The established model now contains 274 components and 0.249748 Jy ![Exited script file: muppet] wmap "J0138-0540_X_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9539 x 2.383 at -4.315 degrees (North through East) ! Clean map min=-0.0020585 max=0.17326 Jy/beam ! Writing clean map to FITS file: J0138-0540_X_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.173263 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000376688 device "J0138-0540_X_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J0138-0540_X_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.652225 0.652225 1.30445 2.6089 5.2178 10.4356 20.8712 41.7424 83.4848 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.173 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9539 x 2.383 at -4.315 degrees (North through East) ! Clean map min=-0.0020585 max=0.17326 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0138-0540_X_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J0138-0540_X_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0138-0540_X_1997_05_07_yyk_uvs.log closed on Mon Jan 8 02:12:29 2007