! Started logfile: J0138-0540_S_1997_05_07_yyk_uvs.log on Sun Jan 7 15:41:50 2007 obs J0138-0540_S_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J0138-0540_S_1997_05_07_yyk_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.78534 visibilities/baseline/integration-bin. ! Found source: J0138-0540 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 614 lines of history. ! ! Reading 20356 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0138-0540_S_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.384552 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.867 mas, bmaj=7.483 mas, bpa=-5.403 degrees ! Estimated noise=2320.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.18518 Jy ! Component: 100 - total flux cleaned = 0.239748 Jy ! Total flux subtracted in 100 components = 0.239748 Jy ! Clean residual min=-0.012371 max=0.022271 Jy/beam ! Clean residual mean=0.000240 rms=0.004121 Jy/beam ! Combined flux in latest and established models = 0.239748 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.239748 Jy ! ! Correcting IF 1. ! A total of 318 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.300854Jy sigma=0.001208 ! Fit after self-cal, rms=0.300705Jy sigma=0.001208 ! Inverting map and beam ! Estimated beam: bmin=2.867 mas, bmaj=7.483 mas, bpa=-5.403 degrees ! Estimated noise=2320.46 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.695 mas, bmaj=9.105 mas, bpa=-5.484 degrees ! Estimated noise=1167.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0337102 Jy ! Component: 100 - total flux cleaned = 0.0469201 Jy ! Component: 150 - total flux cleaned = 0.0539782 Jy ! Component: 200 - total flux cleaned = 0.0566759 Jy ! Total flux subtracted in 200 components = 0.0566759 Jy ! Clean residual min=-0.008127 max=0.008921 Jy/beam ! Clean residual mean=0.000511 rms=0.002357 Jy/beam ! Combined flux in latest and established models = 0.296424 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 54 model components to the UV plane model. ! The established model now contains 64 components and 0.296424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.297722Jy sigma=0.001196 ! Fit after self-cal, rms=0.297576Jy sigma=0.001195 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.695 x 9.105 at -5.484 degrees (North through East) ! Clean map min=-0.0066381 max=0.20382 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.03062 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.05 HN 1.03 KP 0.88 ! LA 1.00 MK 0.98 NL 1.00* OV 1.08 ! PT 0.96 SC 0.82 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.976985 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.14 HN 1.14 KP 0.99 ! LA 1.07 MK 1.05 NL 1.02 OV 1.00 ! PT 0.94 SC 0.90 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.0451 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.07 HN 0.99 KP 0.91 ! LA 0.79 MK 0.83 NL 0.98 OV 0.96 ! PT 1.06 SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.996863 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.08 HN 1.04 KP 0.99 ! LA 0.86 MK 1.04 NL 1.09 OV 1.05 ! PT 0.90 SC 0.96 ! ! ! Fit before self-cal, rms=0.297576Jy sigma=0.001195 ! Fit after self-cal, rms=0.291014Jy sigma=0.001190 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291014Jy sigma=0.001190 ! Fit after self-cal, rms=0.291012Jy sigma=0.001190 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.656 mas, bmaj=8.868 mas, bpa=-4.594 degrees ! Estimated noise=1171.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00632485 Jy ! Component: 100 - total flux cleaned = 0.00696769 Jy ! Component: 150 - total flux cleaned = 0.00716897 Jy ! Component: 200 - total flux cleaned = 0.00725549 Jy ! Total flux subtracted in 200 components = 0.00725549 Jy ! Clean residual min=-0.005619 max=0.005334 Jy/beam ! Clean residual mean=0.000207 rms=0.001453 Jy/beam ! Combined flux in latest and established models = 0.303679 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 85 components and 0.303679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.290872Jy sigma=0.001190 ! Fit after self-cal, rms=0.290859Jy sigma=0.001190 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.290859Jy sigma=0.001190 ! Fit after self-cal, rms=0.289595Jy sigma=0.001185 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224309 Jy ! Component: 100 - total flux cleaned = 0.00264227 Jy ! Component: 150 - total flux cleaned = 0.00256702 Jy ! Component: 200 - total flux cleaned = 0.00256669 Jy ! Total flux subtracted in 200 components = 0.00256669 Jy ! Clean residual min=-0.005617 max=0.004892 Jy/beam ! Clean residual mean=0.000196 rms=0.001421 Jy/beam ! Combined flux in latest and established models = 0.306246 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 98 components and 0.306246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289533Jy sigma=0.001185 ! Fit after self-cal, rms=0.289360Jy sigma=0.001184 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.656 x 8.868 at -4.594 degrees (North through East) ! Clean map min=-0.0054944 max=0.20411 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289360Jy sigma=0.001184 ! Fit after self-cal, rms=0.284632Jy sigma=0.001182 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284632Jy sigma=0.001182 ! Fit after self-cal, rms=0.284595Jy sigma=0.001182 ! Inverting map and beam ! Estimated beam: bmin=3.609 mas, bmaj=8.795 mas, bpa=-4.473 degrees ! Estimated noise=1161.32 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000515414 Jy ! Component: 100 - total flux cleaned = 0.000852734 Jy ! Component: 150 - total flux cleaned = 0.00106603 Jy ! Component: 200 - total flux cleaned = 0.00119325 Jy ! Total flux subtracted in 200 components = 0.00119325 Jy ! Clean residual min=-0.005513 max=0.004764 Jy/beam ! Clean residual mean=0.000177 rms=0.001299 Jy/beam ! Combined flux in latest and established models = 0.307439 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 108 components and 0.307439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284554Jy sigma=0.001182 ! Fit after self-cal, rms=0.284546Jy sigma=0.001182 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284546Jy sigma=0.001182 ! Fit after self-cal, rms=0.286892Jy sigma=0.001180 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286892Jy sigma=0.001180 ! Fit after self-cal, rms=0.286898Jy sigma=0.001180 ! Inverting map and beam ! Estimated beam: bmin=3.601 mas, bmaj=8.776 mas, bpa=-4.316 degrees ! Estimated noise=1163.98 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125815 Jy ! Component: 100 - total flux cleaned = 0.0015999 Jy ! Component: 150 - total flux cleaned = 0.0017178 Jy ! Component: 200 - total flux cleaned = 0.00187457 Jy ! Total flux subtracted in 200 components = 0.00187457 Jy ! Clean residual min=-0.005407 max=0.004858 Jy/beam ! Clean residual mean=0.000185 rms=0.001271 Jy/beam ! Combined flux in latest and established models = 0.309314 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 121 components and 0.309314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286875Jy sigma=0.001180 ! Fit after self-cal, rms=0.286881Jy sigma=0.001180 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.176 mas, bmaj=14.06 mas, bpa=9.818 degrees ! Estimated noise=1415.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168347 Jy ! Component: 100 - total flux cleaned = 0.00173413 Jy ! Component: 150 - total flux cleaned = 0.0017379 Jy ! Component: 200 - total flux cleaned = 0.0017078 Jy ! Total flux subtracted in 200 components = 0.0017078 Jy ! Clean residual min=-0.004536 max=0.004546 Jy/beam ! Clean residual mean=0.000307 rms=0.001444 Jy/beam ! Combined flux in latest and established models = 0.311022 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 134 components and 0.311022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286881Jy sigma=0.001180 ! Fit after self-cal, rms=0.286887Jy sigma=0.001180 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.829 mas, bmaj=7.315 mas, bpa=-4.46 degrees ! Estimated noise=2305.36 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.185176 Jy ! Component: 100 - total flux cleaned = 0.240395 Jy ! Component: 150 - total flux cleaned = 0.26862 Jy ! Component: 200 - total flux cleaned = 0.284395 Jy ! Total flux subtracted in 200 components = 0.284395 Jy ! Clean residual min=-0.009742 max=0.009647 Jy/beam ! Clean residual mean=0.000093 rms=0.002784 Jy/beam ! Combined flux in latest and established models = 0.284395 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.284395 Jy ! Inverting map and beam ! Estimated beam: bmin=3.601 mas, bmaj=8.776 mas, bpa=-4.316 degrees ! Estimated noise=1163.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119177 Jy ! Component: 100 - total flux cleaned = 0.0182222 Jy ! Component: 150 - total flux cleaned = 0.0213181 Jy ! Component: 200 - total flux cleaned = 0.0220651 Jy ! Total flux subtracted in 200 components = 0.0220651 Jy ! Clean residual min=-0.005485 max=0.004978 Jy/beam ! Clean residual mean=0.000213 rms=0.001341 Jy/beam ! Combined flux in latest and established models = 0.30646 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 87 components and 0.30646 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.176 mas, bmaj=14.06 mas, bpa=9.818 degrees ! Estimated noise=1415.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311377 Jy ! Component: 100 - total flux cleaned = 0.00342892 Jy ! Component: 150 - total flux cleaned = 0.00363506 Jy ! Component: 200 - total flux cleaned = 0.00373058 Jy ! Total flux subtracted in 200 components = 0.00373058 Jy ! Clean residual min=-0.004447 max=0.004923 Jy/beam ! Clean residual mean=0.000323 rms=0.001475 Jy/beam ! Combined flux in latest and established models = 0.310191 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 97 components and 0.310191 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.601 mas, bmaj=8.776 mas, bpa=-4.316 degrees ! Estimated noise=1163.98 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108103 Jy ! Component: 100 - total flux cleaned = -0.00108277 Jy ! Component: 150 - total flux cleaned = -0.00108269 Jy ! Component: 200 - total flux cleaned = -0.00108137 Jy ! Total flux subtracted in 200 components = -0.00108137 Jy ! Clean residual min=-0.005194 max=0.004697 Jy/beam ! Clean residual mean=0.000185 rms=0.001277 Jy/beam ! Combined flux in latest and established models = 0.309109 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 109 components and 0.309109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286895Jy sigma=0.001180 ! Fit after self-cal, rms=0.286891Jy sigma=0.001180 wmodel J0138-0540_S_1997_05_07_yyk\_map.mod ! Writing 109 model components to file: J0138-0540_S_1997_05_07_yyk_map.mod wobs J0138-0540_S_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J0138-0540_S_1997_05_07_yyk_uvs.fits wwins J0138-0540_S_1997_05_07_yyk\_map.win ! wwins: Wrote 2 windows to J0138-0540_S_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000781829 Jy ! Component: 100 - total flux cleaned = -0.000316016 Jy ! Component: 150 - total flux cleaned = -2.40442e-05 Jy ! Component: 200 - total flux cleaned = 0.00025457 Jy ! Component: 250 - total flux cleaned = 0.000518554 Jy ! Component: 300 - total flux cleaned = 0.000708838 Jy ! Component: 350 - total flux cleaned = 0.000831364 Jy ! Component: 400 - total flux cleaned = 0.000949428 Jy ! Component: 450 - total flux cleaned = 0.00117559 Jy ! Component: 500 - total flux cleaned = 0.00150079 Jy ! Component: 550 - total flux cleaned = 0.00181532 Jy ! Component: 600 - total flux cleaned = 0.00201861 Jy ! Component: 650 - total flux cleaned = 0.00226538 Jy ! Component: 700 - total flux cleaned = 0.00250675 Jy ! Component: 750 - total flux cleaned = 0.00288481 Jy ! Component: 800 - total flux cleaned = 0.00320772 Jy ! Component: 850 - total flux cleaned = 0.00347743 Jy ! Component: 900 - total flux cleaned = 0.00378557 Jy ! Component: 950 - total flux cleaned = 0.00399975 Jy ! Component: 1000 - total flux cleaned = 0.00408426 Jy ! Component: 1050 - total flux cleaned = 0.00429101 Jy ! Component: 1100 - total flux cleaned = 0.00445286 Jy ! Component: 1150 - total flux cleaned = 0.0046504 Jy ! Component: 1200 - total flux cleaned = 0.00480636 Jy ! Component: 1250 - total flux cleaned = 0.00495937 Jy ! Component: 1300 - total flux cleaned = 0.00514633 Jy ! Component: 1350 - total flux cleaned = 0.00529283 Jy ! Component: 1400 - total flux cleaned = 0.00540103 Jy ! Component: 1450 - total flux cleaned = 0.00554301 Jy ! Component: 1500 - total flux cleaned = 0.00578602 Jy ! Component: 1550 - total flux cleaned = 0.00588893 Jy ! Component: 1600 - total flux cleaned = 0.00615819 Jy ! Component: 1650 - total flux cleaned = 0.00638989 Jy ! Component: 1700 - total flux cleaned = 0.00655246 Jy ! Component: 1750 - total flux cleaned = 0.0067447 Jy ! Component: 1800 - total flux cleaned = 0.00693408 Jy ! Component: 1850 - total flux cleaned = 0.00712091 Jy ! Component: 1900 - total flux cleaned = 0.00730438 Jy ! Component: 1950 - total flux cleaned = 0.00745592 Jy ! Component: 2000 - total flux cleaned = 0.00766472 Jy ! Total flux subtracted in 2048 components = 0.00787063 Jy ! Clean residual min=-0.002522 max=0.001500 Jy/beam ! Clean residual mean=0.000090 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.31698 Jy keep ! Adding 139 model components to the UV plane model. ! The established model now contains 248 components and 0.31698 Jy ![Exited script file: muppet] wmap "J0138-0540_S_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.601 x 8.776 at -4.316 degrees (North through East) ! Clean map min=-0.004182 max=0.20315 Jy/beam ! Writing clean map to FITS file: J0138-0540_S_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.203146 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000594993 device "J0138-0540_S_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J0138-0540_S_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.87867 0.87867 1.75734 3.51468 7.02936 14.0587 28.1174 56.2349 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.203 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.601 x 8.776 at -4.316 degrees (North through East) ! Clean map min=-0.004182 max=0.20315 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0138-0540_S_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J0138-0540_S_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0138-0540_S_1997_05_07_yyk_uvs.log closed on Sun Jan 7 15:41:58 2007