! Started logfile: J0118-2141_X_1997_08_27_yyk_uvs.log on Mon Jan  8 02:05:34 2007
obs J0118-2141_X_1997_08_27_yyk_uva.fits
! Reading UV FITS file: J0118-2141_X_1997_08_27_yyk_uva.fits
! AN table 1: 150 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.916 visibilities/baseline/integration-bin.
! Found source: J0118-2141
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.15447e+09        8e+06          1        8e+06
!  02        2  8.23447e+09        8e+06          1        8e+06
!  03        3  8.41447e+09        8e+06          1        8e+06
!  04        4  8.55447e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 701 lines of history.
! 
! Reading 24732 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0118-2141_X_1997_08_27_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.521868 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6824 mas, bmaj=1.72 mas, bpa=-1.837 degrees
! Estimated noise=1507.52 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.358946 Jy
! Component: 100  -  total flux cleaned = 0.449229 Jy
! Total flux subtracted in 100 components = 0.449229 Jy
! Clean residual min=-0.020126 max=0.029624 Jy/beam
! Clean residual mean=0.000047 rms=0.006012 Jy/beam
! Combined flux in latest and established models = 0.449229 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.449229 Jy
! 
! Correcting IF 1.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.240485Jy  sigma=0.001380
! Fit after  self-cal, rms=0.238954Jy  sigma=0.001377
! Inverting map and beam 
! Estimated beam: bmin=0.6824 mas, bmaj=1.72 mas, bpa=-1.837 degrees
! Estimated noise=1507.52 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8856 mas, bmaj=2.217 mas, bpa=-4.42 degrees
! Estimated noise=717.646 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.073188 Jy
! Component: 100  -  total flux cleaned = 0.097265 Jy
! Component: 150  -  total flux cleaned = 0.106349 Jy
! Component: 200  -  total flux cleaned = 0.109224 Jy
! Total flux subtracted in 200 components = 0.109224 Jy
! Clean residual min=-0.006272 max=0.011745 Jy/beam
! Clean residual mean=0.000003 rms=0.002000 Jy/beam
! Combined flux in latest and established models = 0.558452 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 39 model components to the UV plane model.
! The established model now contains 45 components and 0.558452 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.228876Jy  sigma=0.001278
! Fit after  self-cal, rms=0.228870Jy  sigma=0.001278
! Inverting map 
! Added new window around map position (0.8, -3).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0144474 Jy
! Component: 100  -  total flux cleaned = 0.0164569 Jy
! Component: 150  -  total flux cleaned = 0.0164575 Jy
! Component: 200  -  total flux cleaned = 0.0166224 Jy
! Total flux subtracted in 200 components = 0.0166224 Jy
! Clean residual min=-0.005938 max=0.007710 Jy/beam
! Clean residual mean=-0.000022 rms=0.001407 Jy/beam
! Combined flux in latest and established models = 0.575074 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 71 components and 0.575075 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.227899Jy  sigma=0.001274
! Fit after  self-cal, rms=0.227808Jy  sigma=0.001273
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8856 x 2.217 at -4.42 degrees (North through East)
! Clean map  min=-0.0045064  max=0.46023 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00065
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.03     KP        1.02     
!   LA        1.01     MK        1.03     NL        1.01     OV        1.00     
!   PT        0.97     SC        0.93     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00555
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.01     KP        1.00     
!   LA        0.98     MK        0.99     NL        1.00     OV        1.04     
!   PT        0.94     SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.989795
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.08     KP        0.99     
!   LA        0.99     MK        1.02     NL        1.00     OV        1.00     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.981033
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.08     KP        1.00     
!   LA        0.98     MK        1.01     NL        1.00     OV        1.03     
!   PT        1.01     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.227808Jy  sigma=0.001273
! Fit after  self-cal, rms=0.228235Jy  sigma=0.001270
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.228235Jy  sigma=0.001270
! Fit after  self-cal, rms=0.228234Jy  sigma=0.001270
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8923 mas, bmaj=2.224 mas, bpa=-4.046 degrees
! Estimated noise=712.71 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00613033 Jy
! Component: 100  -  total flux cleaned = -0.00733721 Jy
! Component: 150  -  total flux cleaned = -0.00788778 Jy
! Component: 200  -  total flux cleaned = -0.00835062 Jy
! Total flux subtracted in 200 components = -0.00835062 Jy
! Clean residual min=-0.004607 max=0.004346 Jy/beam
! Clean residual mean=-0.000044 rms=0.001041 Jy/beam
! Combined flux in latest and established models = 0.566724 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 82 components and 0.566724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.227753Jy  sigma=0.001269
! Fit after  self-cal, rms=0.227747Jy  sigma=0.001269
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.227747Jy  sigma=0.001269
! Fit after  self-cal, rms=0.223359Jy  sigma=0.001241
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7.8, 19.6).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00215025 Jy
! Component: 100  -  total flux cleaned = 0.00202311 Jy
! Component: 150  -  total flux cleaned = 0.00180965 Jy
! Component: 200  -  total flux cleaned = 0.00161124 Jy
! Total flux subtracted in 200 components = 0.00161124 Jy
! Clean residual min=-0.004190 max=0.003734 Jy/beam
! Clean residual mean=-0.000038 rms=0.000970 Jy/beam
! Combined flux in latest and established models = 0.568335 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 98 components and 0.568335 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.223145Jy  sigma=0.001240
! Fit after  self-cal, rms=0.222626Jy  sigma=0.001237
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8923 x 2.224 at -4.046 degrees (North through East)
! Clean map  min=-0.004734  max=0.45853 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.222626Jy  sigma=0.001237
! Fit after  self-cal, rms=1.480208Jy  sigma=0.001219
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.480208Jy  sigma=0.001219
! Fit after  self-cal, rms=1.480587Jy  sigma=0.001219
! Inverting map and beam 
! Estimated beam: bmin=0.893 mas, bmaj=2.238 mas, bpa=-4.262 degrees
! Estimated noise=711.352 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103638 Jy
! Component: 100  -  total flux cleaned = 0.00112113 Jy
! Component: 150  -  total flux cleaned = 0.00119354 Jy
! Component: 200  -  total flux cleaned = 0.00132563 Jy
! Total flux subtracted in 200 components = 0.00132563 Jy
! Clean residual min=-0.003213 max=0.002868 Jy/beam
! Clean residual mean=-0.000009 rms=0.000693 Jy/beam
! Combined flux in latest and established models = 0.569661 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 116 components and 0.569661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.480579Jy  sigma=0.001218
! Fit after  self-cal, rms=1.480471Jy  sigma=0.001218
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.480471Jy  sigma=0.001218
! Fit after  self-cal, rms=1.196381Jy  sigma=0.001216
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.196381Jy  sigma=0.001216
! Fit after  self-cal, rms=1.196360Jy  sigma=0.001216
! Inverting map and beam 
! Estimated beam: bmin=0.8919 mas, bmaj=2.239 mas, bpa=-4.286 degrees
! Estimated noise=711.115 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000653131 Jy
! Component: 100  -  total flux cleaned = 0.000768984 Jy
! Component: 150  -  total flux cleaned = 0.000714565 Jy
! Component: 200  -  total flux cleaned = 0.000766185 Jy
! Total flux subtracted in 200 components = 0.000766185 Jy
! Clean residual min=-0.003211 max=0.002810 Jy/beam
! Clean residual mean=-0.000009 rms=0.000673 Jy/beam
! Combined flux in latest and established models = 0.570427 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 124 components and 0.570427 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.196352Jy  sigma=0.001216
! Fit after  self-cal, rms=1.196364Jy  sigma=0.001216
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.386 mas, bmaj=5.055 mas, bpa=3.999 degrees
! Estimated noise=917.717 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000275684 Jy
! Component: 100  -  total flux cleaned = -0.000391115 Jy
! Component: 150  -  total flux cleaned = -0.000439004 Jy
! Component: 200  -  total flux cleaned = -0.000438677 Jy
! Total flux subtracted in 200 components = -0.000438677 Jy
! Clean residual min=-0.003045 max=0.003314 Jy/beam
! Clean residual mean=-0.000019 rms=0.000840 Jy/beam
! Combined flux in latest and established models = 0.569988 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 136 components and 0.569988 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.196368Jy  sigma=0.001216
! Fit after  self-cal, rms=1.196410Jy  sigma=0.001216
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6833 mas, bmaj=1.711 mas, bpa=-1.978 degrees
! Estimated noise=1560.92 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.375754 Jy
! Component: 100  -  total flux cleaned = 0.469469 Jy
! Component: 150  -  total flux cleaned = 0.511561 Jy
! Component: 200  -  total flux cleaned = 0.532962 Jy
! Total flux subtracted in 200 components = 0.532962 Jy
! Clean residual min=-0.007842 max=0.008938 Jy/beam
! Clean residual mean=0.000019 rms=0.002155 Jy/beam
! Combined flux in latest and established models = 0.532962 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 33 model components to the UV plane model.
! The established model now contains 33 components and 0.532962 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8919 mas, bmaj=2.239 mas, bpa=-4.286 degrees
! Estimated noise=711.115 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0192307 Jy
! Component: 100  -  total flux cleaned = 0.0286638 Jy
! Component: 150  -  total flux cleaned = 0.034095 Jy
! Component: 200  -  total flux cleaned = 0.0358073 Jy
! Total flux subtracted in 200 components = 0.0358073 Jy
! Clean residual min=-0.003086 max=0.003303 Jy/beam
! Clean residual mean=-0.000006 rms=0.000787 Jy/beam
! Combined flux in latest and established models = 0.568769 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 68 components and 0.568769 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.386 mas, bmaj=5.055 mas, bpa=3.999 degrees
! Estimated noise=917.717 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00155379 Jy
! Component: 100  -  total flux cleaned = 0.00160764 Jy
! Component: 150  -  total flux cleaned = 0.00169851 Jy
! Component: 200  -  total flux cleaned = 0.00165961 Jy
! Total flux subtracted in 200 components = 0.00165961 Jy
! Clean residual min=-0.003037 max=0.003138 Jy/beam
! Clean residual mean=-0.000020 rms=0.000856 Jy/beam
! Combined flux in latest and established models = 0.570429 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 86 components and 0.570429 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8919 mas, bmaj=2.239 mas, bpa=-4.286 degrees
! Estimated noise=711.115 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000174831 Jy
! Component: 100  -  total flux cleaned = -0.000178676 Jy
! Component: 150  -  total flux cleaned = -8.76956e-05 Jy
! Component: 200  -  total flux cleaned = -8.06907e-06 Jy
! Total flux subtracted in 200 components = -8.06907e-06 Jy
! Clean residual min=-0.003202 max=0.002897 Jy/beam
! Clean residual mean=-0.000009 rms=0.000717 Jy/beam
! Combined flux in latest and established models = 0.570421 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 24 model components to the UV plane model.
! The established model now contains 99 components and 0.570421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.196408Jy  sigma=0.001216
! Fit after  self-cal, rms=1.196462Jy  sigma=0.001216
wmodel J0118-2141_X_1997_08_27_yyk\_map.mod
! Writing 99 model components to file: J0118-2141_X_1997_08_27_yyk_map.mod
wobs J0118-2141_X_1997_08_27_yyk\_uvs.fits
! Writing UV FITS file: J0118-2141_X_1997_08_27_yyk_uvs.fits
wwins J0118-2141_X_1997_08_27_yyk\_map.win
! wwins: Wrote 3 windows to J0118-2141_X_1997_08_27_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 2.15983e-05 Jy
! Component: 100  -  total flux cleaned = -0.000176196 Jy
! Component: 150  -  total flux cleaned = -4.24896e-05 Jy
! Component: 200  -  total flux cleaned = 8.5799e-05 Jy
! Component: 250  -  total flux cleaned = 0.000127717 Jy
! Component: 300  -  total flux cleaned = 8.80925e-05 Jy
! Component: 350  -  total flux cleaned = 0.000125822 Jy
! Component: 400  -  total flux cleaned = 0.00023801 Jy
! Component: 450  -  total flux cleaned = 0.00042081 Jy
! Component: 500  -  total flux cleaned = 0.000492388 Jy
! Component: 550  -  total flux cleaned = 0.000667865 Jy
! Component: 600  -  total flux cleaned = 0.000907063 Jy
! Component: 650  -  total flux cleaned = 0.00114083 Jy
! Component: 700  -  total flux cleaned = 0.00133749 Jy
! Component: 750  -  total flux cleaned = 0.00165819 Jy
! Component: 800  -  total flux cleaned = 0.00181556 Jy
! Component: 850  -  total flux cleaned = 0.00209276 Jy
! Component: 900  -  total flux cleaned = 0.00227371 Jy
! Component: 950  -  total flux cleaned = 0.00248142 Jy
! Component: 1000  -  total flux cleaned = 0.00271438 Jy
! Component: 1050  -  total flux cleaned = 0.00297218 Jy
! Component: 1100  -  total flux cleaned = 0.00316871 Jy
! Component: 1150  -  total flux cleaned = 0.00336254 Jy
! Component: 1200  -  total flux cleaned = 0.00352529 Jy
! Component: 1250  -  total flux cleaned = 0.00363256 Jy
! Component: 1300  -  total flux cleaned = 0.00371171 Jy
! Component: 1350  -  total flux cleaned = 0.00384213 Jy
! Component: 1400  -  total flux cleaned = 0.00397032 Jy
! Component: 1450  -  total flux cleaned = 0.00399584 Jy
! Component: 1500  -  total flux cleaned = 0.00407121 Jy
! Component: 1550  -  total flux cleaned = 0.00414508 Jy
! Component: 1600  -  total flux cleaned = 0.00416938 Jy
! Component: 1650  -  total flux cleaned = 0.00419364 Jy
! Component: 1700  -  total flux cleaned = 0.00431341 Jy
! Component: 1750  -  total flux cleaned = 0.00433714 Jy
! Component: 1800  -  total flux cleaned = 0.00440727 Jy
! Component: 1850  -  total flux cleaned = 0.00445345 Jy
! Component: 1900  -  total flux cleaned = 0.00436137 Jy
! Component: 1950  -  total flux cleaned = 0.00442968 Jy
! Component: 2000  -  total flux cleaned = 0.0043622 Jy
! Total flux subtracted in 2048 components = 0.00438487 Jy
! Clean residual min=-0.001477 max=0.001216 Jy/beam
! Clean residual mean=-0.000015 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.574805 Jy
keep
! Adding 130 model components to the UV plane model.
! The established model now contains 229 components and 0.574806 Jy
![Exited script file: muppet]
wmap "J0118-2141_X_1997_08_27_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8919 x 2.239 at -4.286 degrees (North through East)
! Clean map  min=-0.0020826  max=0.46043 Jy/beam
! Writing clean map to FITS file: J0118-2141_X_1997_08_27_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.460426 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000401916 
device "J0118-2141_X_1997_08_27_yyk\_map.eps/VPS"
! Attempting to open device: 'J0118-2141_X_1997_08_27_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.261877 0.261877 0.523753 1.04751 2.09501 4.19002 8.38005 16.7601 33.5202 67.0404
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0012 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.46 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8919 x 2.239 at -4.286 degrees (North through East)
! Clean map  min=-0.0020826  max=0.46043 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0118-2141_X_1997_08_27_yyk\_map.gif/gif"
! Attempting to open device: 'J0118-2141_X_1997_08_27_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0118-2141_X_1997_08_27_yyk_uvs.log closed on Mon Jan  8 02:05:44 2007