! Started logfile: J0108-0037_S_1997_05_07_yyk_uvs.log on Sun Jan 7 15:34:47 2007 obs J0108-0037_S_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J0108-0037_S_1997_05_07_yyk_uva.fits ! AN table 1: 147 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.755253 visibilities/baseline/integration-bin. ! Found source: J0108-0037 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 614 lines of history. ! ! Reading 19984 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0108-0037_S_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.511995 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=7.404 mas, bpa=-6.486 degrees ! Estimated noise=1828.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.277015 Jy ! Component: 100 - total flux cleaned = 0.357092 Jy ! Total flux subtracted in 100 components = 0.357092 Jy ! Clean residual min=-0.031317 max=0.087939 Jy/beam ! Clean residual mean=0.001183 rms=0.011252 Jy/beam ! Combined flux in latest and established models = 0.357092 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.357092 Jy ! ! Correcting IF 1. ! A total of 350 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 206 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 206 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 206 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.345473Jy sigma=0.001405 ! Fit after self-cal, rms=0.343368Jy sigma=0.001399 ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=7.404 mas, bpa=-6.486 degrees ! Estimated noise=1828.94 mJy/beam. ! Added new window around map position (5, 1.5). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0881902 Jy ! Component: 100 - total flux cleaned = 0.121774 Jy ! Total flux subtracted in 100 components = 0.121774 Jy ! Clean residual min=-0.030879 max=0.035290 Jy/beam ! Clean residual mean=0.000936 rms=0.007551 Jy/beam ! Combined flux in latest and established models = 0.478866 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 26 components and 0.478866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.319668Jy sigma=0.001308 ! Fit after self-cal, rms=0.317191Jy sigma=0.001298 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.771 mas, bmaj=8.903 mas, bpa=-6.529 degrees ! Estimated noise=1143.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0286503 Jy ! Component: 100 - total flux cleaned = 0.0330179 Jy ! Component: 150 - total flux cleaned = 0.0368446 Jy ! Component: 200 - total flux cleaned = 0.0391427 Jy ! Total flux subtracted in 200 components = 0.0391427 Jy ! Clean residual min=-0.025107 max=0.045464 Jy/beam ! Clean residual mean=0.002029 rms=0.010919 Jy/beam ! Combined flux in latest and established models = 0.518009 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 42 components and 0.518009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.312918Jy sigma=0.001285 ! Fit after self-cal, rms=0.312545Jy sigma=0.001284 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.771 x 8.903 at -6.529 degrees (North through East) ! Clean map min=-0.022118 max=0.30297 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02025 ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.29 HN 0.98 KP 0.86 ! LA 0.96 MK 1.00 NL 1.00* OV 1.06 ! PT 0.92 SC 0.86 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.979725 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.34 HN 1.13 KP 0.99 ! LA 1.04 MK 1.05 NL 0.92 OV 1.05 ! PT 0.89 SC 0.86 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.05111 ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.20 HN 0.93 KP 0.89 ! LA 0.78 MK 0.91 NL 0.89 OV 0.95 ! PT 1.00 SC 1.07 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.97752 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.26 HN 1.11 KP 0.94 ! LA 0.85 MK 1.06 NL 1.03 OV 1.09 ! PT 0.87 SC 1.06 ! ! ! Fit before self-cal, rms=0.312545Jy sigma=0.001284 ! Fit after self-cal, rms=0.294158Jy sigma=0.001253 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294158Jy sigma=0.001253 ! Fit after self-cal, rms=0.294192Jy sigma=0.001253 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.812 mas, bmaj=8.68 mas, bpa=-5.558 degrees ! Estimated noise=1132.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00568453 Jy ! Component: 100 - total flux cleaned = 0.00568303 Jy ! Component: 150 - total flux cleaned = 0.00544007 Jy ! Component: 200 - total flux cleaned = 0.00544501 Jy ! Total flux subtracted in 200 components = 0.00544501 Jy ! Clean residual min=-0.019713 max=0.030671 Jy/beam ! Clean residual mean=0.001202 rms=0.008568 Jy/beam ! Combined flux in latest and established models = 0.523454 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 65 components and 0.523454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293710Jy sigma=0.001251 ! Fit after self-cal, rms=0.293557Jy sigma=0.001250 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293557Jy sigma=0.001250 ! Fit after self-cal, rms=0.290855Jy sigma=0.001239 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000221703 Jy ! Component: 100 - total flux cleaned = 0.00042841 Jy ! Component: 150 - total flux cleaned = 0.000415143 Jy ! Component: 200 - total flux cleaned = 0.000568201 Jy ! Total flux subtracted in 200 components = 0.000568201 Jy ! Clean residual min=-0.019971 max=0.030598 Jy/beam ! Clean residual mean=0.001193 rms=0.008525 Jy/beam ! Combined flux in latest and established models = 0.524022 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 72 components and 0.524022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.290605Jy sigma=0.001238 ! Fit after self-cal, rms=0.290220Jy sigma=0.001237 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.812 x 8.68 at -5.558 degrees (North through East) ! Clean map min=-0.018842 max=0.30337 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.290220Jy sigma=0.001237 ! Fit after self-cal, rms=0.285718Jy sigma=0.001215 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.285718Jy sigma=0.001215 ! Fit after self-cal, rms=0.285689Jy sigma=0.001215 ! Inverting map and beam ! Estimated beam: bmin=3.774 mas, bmaj=8.647 mas, bpa=-5.49 degrees ! Estimated noise=1120.9 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000921155 Jy ! Component: 100 - total flux cleaned = -0.00112579 Jy ! Component: 150 - total flux cleaned = -0.00127478 Jy ! Component: 200 - total flux cleaned = -0.00140983 Jy ! Total flux subtracted in 200 components = -0.00140983 Jy ! Clean residual min=-0.015947 max=0.026706 Jy/beam ! Clean residual mean=0.000924 rms=0.006453 Jy/beam ! Combined flux in latest and established models = 0.522612 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 75 components and 0.522612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.285522Jy sigma=0.001214 ! Fit after self-cal, rms=0.285444Jy sigma=0.001213 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.285444Jy sigma=0.001213 ! Fit after self-cal, rms=0.285025Jy sigma=0.001212 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.285025Jy sigma=0.001212 ! Fit after self-cal, rms=0.285029Jy sigma=0.001212 ! Inverting map and beam ! Estimated beam: bmin=3.77 mas, bmaj=8.633 mas, bpa=-5.498 degrees ! Estimated noise=1119.2 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00090303 Jy ! Component: 100 - total flux cleaned = -0.000892284 Jy ! Component: 150 - total flux cleaned = -0.00101078 Jy ! Component: 200 - total flux cleaned = -0.00110688 Jy ! Total flux subtracted in 200 components = -0.00110688 Jy ! Clean residual min=-0.015410 max=0.026304 Jy/beam ! Clean residual mean=0.000919 rms=0.006376 Jy/beam ! Combined flux in latest and established models = 0.521506 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 81 components and 0.521506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284943Jy sigma=0.001211 ! Fit after self-cal, rms=0.284907Jy sigma=0.001211 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.43 mas, bmaj=13.48 mas, bpa=11.59 degrees ! Estimated noise=1336.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00250473 Jy ! Component: 100 - total flux cleaned = 0.00232799 Jy ! Component: 150 - total flux cleaned = 0.00225793 Jy ! Component: 200 - total flux cleaned = 0.00226179 Jy ! Total flux subtracted in 200 components = 0.00226179 Jy ! Clean residual min=-0.021554 max=0.035002 Jy/beam ! Clean residual mean=0.001588 rms=0.010446 Jy/beam ! Combined flux in latest and established models = 0.523767 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 90 components and 0.523768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284946Jy sigma=0.001211 ! Fit after self-cal, rms=0.284937Jy sigma=0.001211 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=7.238 mas, bpa=-5.639 degrees ! Estimated noise=1790.22 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.294643 Jy ! Component: 100 - total flux cleaned = 0.392509 Jy ! Component: 150 - total flux cleaned = 0.438021 Jy ! Component: 200 - total flux cleaned = 0.464205 Jy ! Total flux subtracted in 200 components = 0.464205 Jy ! Clean residual min=-0.016051 max=0.018069 Jy/beam ! Clean residual mean=0.000453 rms=0.004525 Jy/beam ! Combined flux in latest and established models = 0.464205 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.464205 Jy ! Inverting map and beam ! Estimated beam: bmin=3.77 mas, bmaj=8.633 mas, bpa=-5.498 degrees ! Estimated noise=1119.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0264114 Jy ! Component: 100 - total flux cleaned = 0.0403488 Jy ! Component: 150 - total flux cleaned = 0.0443183 Jy ! Component: 200 - total flux cleaned = 0.0465692 Jy ! Total flux subtracted in 200 components = 0.0465692 Jy ! Clean residual min=-0.015971 max=0.026206 Jy/beam ! Clean residual mean=0.001054 rms=0.006581 Jy/beam ! Combined flux in latest and established models = 0.510775 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 58 components and 0.510775 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.43 mas, bmaj=13.48 mas, bpa=11.59 degrees ! Estimated noise=1336.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0085174 Jy ! Component: 100 - total flux cleaned = 0.00950353 Jy ! Component: 150 - total flux cleaned = 0.0101264 Jy ! Component: 200 - total flux cleaned = 0.0102674 Jy ! Total flux subtracted in 200 components = 0.0102674 Jy ! Clean residual min=-0.021432 max=0.035880 Jy/beam ! Clean residual mean=0.001654 rms=0.010552 Jy/beam ! Combined flux in latest and established models = 0.521042 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 66 components and 0.521042 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.77 mas, bmaj=8.633 mas, bpa=-5.498 degrees ! Estimated noise=1119.2 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00189771 Jy ! Component: 100 - total flux cleaned = -0.0022281 Jy ! Component: 150 - total flux cleaned = -0.00251571 Jy ! Component: 200 - total flux cleaned = -0.00276457 Jy ! Total flux subtracted in 200 components = -0.00276457 Jy ! Clean residual min=-0.015853 max=0.026246 Jy/beam ! Clean residual mean=0.000956 rms=0.006426 Jy/beam ! Combined flux in latest and established models = 0.518277 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 80 components and 0.518278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284965Jy sigma=0.001212 ! Fit after self-cal, rms=0.284799Jy sigma=0.001211 wmodel J0108-0037_S_1997_05_07_yyk\_map.mod ! Writing 80 model components to file: J0108-0037_S_1997_05_07_yyk_map.mod wobs J0108-0037_S_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J0108-0037_S_1997_05_07_yyk_uvs.fits wwins J0108-0037_S_1997_05_07_yyk\_map.win ! wwins: Wrote 2 windows to J0108-0037_S_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110827 Jy ! Component: 100 - total flux cleaned = 0.020248 Jy ! Component: 150 - total flux cleaned = 0.0283124 Jy ! Component: 200 - total flux cleaned = 0.0355179 Jy ! Component: 250 - total flux cleaned = 0.0409873 Jy ! Component: 300 - total flux cleaned = 0.0455248 Jy ! Component: 350 - total flux cleaned = 0.0493107 Jy ! Component: 400 - total flux cleaned = 0.0524543 Jy ! Component: 450 - total flux cleaned = 0.0550314 Jy ! Component: 500 - total flux cleaned = 0.057107 Jy ! Component: 550 - total flux cleaned = 0.0583686 Jy ! Component: 600 - total flux cleaned = 0.059583 Jy ! Component: 650 - total flux cleaned = 0.0602562 Jy ! Component: 700 - total flux cleaned = 0.0612382 Jy ! Component: 750 - total flux cleaned = 0.0620309 Jy ! Component: 800 - total flux cleaned = 0.0626473 Jy ! Component: 850 - total flux cleaned = 0.0632456 Jy ! Component: 900 - total flux cleaned = 0.0635354 Jy ! Component: 950 - total flux cleaned = 0.0635346 Jy ! Component: 1000 - total flux cleaned = 0.0636734 Jy ! Component: 1050 - total flux cleaned = 0.0635397 Jy ! Component: 1100 - total flux cleaned = 0.0634072 Jy ! Component: 1150 - total flux cleaned = 0.0630195 Jy ! Component: 1200 - total flux cleaned = 0.0630218 Jy ! Component: 1250 - total flux cleaned = 0.0630215 Jy ! Component: 1300 - total flux cleaned = 0.0626558 Jy ! Component: 1350 - total flux cleaned = 0.0626547 Jy ! Component: 1400 - total flux cleaned = 0.0624186 Jy ! Component: 1450 - total flux cleaned = 0.0624178 Jy ! Component: 1500 - total flux cleaned = 0.0621916 Jy ! Component: 1550 - total flux cleaned = 0.062081 Jy ! Component: 1600 - total flux cleaned = 0.0620821 Jy ! Component: 1650 - total flux cleaned = 0.0619758 Jy ! Component: 1700 - total flux cleaned = 0.0619745 Jy ! Component: 1750 - total flux cleaned = 0.0616611 Jy ! Component: 1800 - total flux cleaned = 0.0614565 Jy ! Component: 1850 - total flux cleaned = 0.061456 Jy ! Component: 1900 - total flux cleaned = 0.0611596 Jy ! Component: 1950 - total flux cleaned = 0.0613574 Jy ! Component: 2000 - total flux cleaned = 0.0614536 Jy ! Total flux subtracted in 2048 components = 0.0612635 Jy ! Clean residual min=-0.005998 max=0.006061 Jy/beam ! Clean residual mean=0.000222 rms=0.002490 Jy/beam ! Combined flux in latest and established models = 0.579541 Jy keep ! Adding 231 model components to the UV plane model. ! The established model now contains 311 components and 0.579541 Jy ![Exited script file: muppet] wmap "J0108-0037_S_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.77 x 8.633 at -5.498 degrees (North through East) ! Clean map min=-0.011334 max=0.31262 Jy/beam ! Writing clean map to FITS file: J0108-0037_S_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.312616 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00242805 device "J0108-0037_S_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J0108-0037_S_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.33006 2.33006 4.66013 9.32025 18.6405 37.281 74.562 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0072 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.312 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.77 x 8.633 at -5.498 degrees (North through East) ! Clean map min=-0.011334 max=0.31262 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0108-0037_S_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J0108-0037_S_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0108-0037_S_1997_05_07_yyk_uvs.log closed on Sun Jan 7 15:34:54 2007