! Started logfile: J0106-4034_X_1994_08_12_yyk_uvs.log on Mon Jan 8 02:01:29 2007 obs J0106-4034_X_1994_08_12_yyk_uva.fits ! Reading UV FITS file: J0106-4034_X_1994_08_12_yyk_uva.fits ! AN table 1: 27 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.869136 visibilities/baseline/integration-bin. ! Found source: J0106-4034 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15049e+09 4e+06 1 4e+06 ! 02 2 8.23236e+09 4e+06 1 4e+06 ! 03 3 8.41236e+09 4e+06 1 4e+06 ! 04 4 8.55236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 783 lines of history. ! ! Reading 4224 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0106-4034_X_1994_08_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.82623 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7071 mas, bmaj=2.138 mas, bpa=-14.09 degrees ! Estimated noise=4202.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.31729 Jy ! Component: 100 - total flux cleaned = 1.63856 Jy ! Total flux subtracted in 100 components = 1.63856 Jy ! Clean residual min=-0.196375 max=0.316204 Jy/beam ! Clean residual mean=0.001194 rms=0.069947 Jy/beam ! Combined flux in latest and established models = 1.63856 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.63856 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.996772Jy sigma=0.007010 ! Fit after self-cal, rms=0.994166Jy sigma=0.006991 ! Inverting map and beam ! Estimated beam: bmin=0.7071 mas, bmaj=2.138 mas, bpa=-14.09 degrees ! Estimated noise=4202.89 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.093 mas, bmaj=2.964 mas, bpa=-12.07 degrees ! Estimated noise=1670.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.14044 Jy ! Component: 100 - total flux cleaned = 0.152119 Jy ! Component: 150 - total flux cleaned = 0.153325 Jy ! Component: 200 - total flux cleaned = 0.15353 Jy ! Total flux subtracted in 200 components = 0.15353 Jy ! Clean residual min=-0.164688 max=0.348457 Jy/beam ! Clean residual mean=0.007391 rms=0.098724 Jy/beam ! Combined flux in latest and established models = 1.79209 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 13 components and 1.79209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.990478Jy sigma=0.006910 ! Fit after self-cal, rms=0.990472Jy sigma=0.006909 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.093 x 2.964 at -12.07 degrees (North through East) ! Clean map min=-0.15837 max=1.5787 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.0804585 ! Telescope amplitude corrections in sub-array 1: ! BR 115.80 FD 0.83 HN 1.34 KP 0.88 ! LA 0.84 MK 1.06 NL 0.90 OV 0.88 ! PT 0.84 SC 0.90 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.051376 ! Telescope amplitude corrections in sub-array 1: ! BR 186.08 FD 0.82 HN 1.41 KP 0.87 ! LA 0.83 MK 1.08 NL 0.88 OV 0.91 ! PT 0.85 SC 0.93 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.0586513 ! Telescope amplitude corrections in sub-array 1: ! BR 161.99 FD 0.82 HN 1.38 KP 0.83 ! LA 0.82 MK 1.01 NL 0.92 OV 0.88 ! PT 0.88 SC 0.97 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.0566933 ! Telescope amplitude corrections in sub-array 1: ! BR 167.93 FD 0.83 HN 1.40 KP 0.86 ! LA 0.83 MK 1.01 NL 0.89 OV 0.85 ! PT 0.84 SC 0.95 ! ! ! Fit before self-cal, rms=0.990472Jy sigma=0.006909 ! Fit after self-cal, rms=1.584239Jy sigma=3.733748 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.584239Jy sigma=3.733748 ! Fit after self-cal, rms=1.584428Jy sigma=3.733748 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.168 mas, bmaj=3.122 mas, bpa=-10.6 degrees ! Estimated noise=4.91658 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -1.47771 Jy ! Component: 100 - total flux cleaned = -1.72074 Jy ! Component: 150 - total flux cleaned = -1.76942 Jy ! Component: 200 - total flux cleaned = -1.78175 Jy ! Total flux subtracted in 200 components = -1.78175 Jy ! Clean residual min=-0.007238 max=0.004519 Jy/beam ! Clean residual mean=-0.000016 rms=0.001175 Jy/beam ! Combined flux in latest and established models = 0.0103419 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 21 components and 0.0103418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080014Jy sigma=0.038771 ! Fit after self-cal, rms=0.078102Jy sigma=0.036140 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078102Jy sigma=0.036140 ! Fit after self-cal, rms=0.077521Jy sigma=0.035812 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00263298 Jy ! Component: 100 - total flux cleaned = -0.00324805 Jy ! Component: 150 - total flux cleaned = -0.00359478 Jy ! Component: 200 - total flux cleaned = -0.00390124 Jy ! Total flux subtracted in 200 components = -0.00390124 Jy ! Clean residual min=-0.003322 max=0.002471 Jy/beam ! Clean residual mean=-0.000003 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.00644058 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 26 components and 0.00644058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075929Jy sigma=0.027097 ! Fit after self-cal, rms=0.075498Jy sigma=0.026706 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.168 x 3.122 at -10.6 degrees (North through East) ! Clean map min=-0.011525 max=0.017904 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.891 mas, bmaj=12.44 mas, bpa=-9.453 degrees ! Estimated noise=5.64456 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00066391 Jy ! Component: 100 - total flux cleaned = -0.00066938 Jy ! Component: 150 - total flux cleaned = -0.000702481 Jy ! Component: 200 - total flux cleaned = -0.000737495 Jy ! Total flux subtracted in 200 components = -0.000737495 Jy ! Clean residual min=-0.001194 max=0.000811 Jy/beam ! Clean residual mean=-0.000000 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.00570308 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 29 components and 0.00570308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075315Jy sigma=0.025459 ! Fit after self-cal, rms=0.075341Jy sigma=0.025402 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7148 mas, bmaj=2.143 mas, bpa=-13.83 degrees ! Estimated noise=15.6138 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00405422 Jy ! Component: 100 - total flux cleaned = 0.00412977 Jy ! Component: 150 - total flux cleaned = 0.0041387 Jy ! Component: 200 - total flux cleaned = 0.00409909 Jy ! Total flux subtracted in 200 components = 0.00409909 Jy ! Clean residual min=-0.000848 max=0.001950 Jy/beam ! Clean residual mean=0.000002 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.00409909 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.00409909 Jy ! Inverting map and beam ! Estimated beam: bmin=1.168 mas, bmaj=3.122 mas, bpa=-10.6 degrees ! Estimated noise=4.91658 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.2, 0.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157888 Jy ! Component: 100 - total flux cleaned = 0.00177205 Jy ! Component: 150 - total flux cleaned = 0.00182027 Jy ! Component: 200 - total flux cleaned = 0.00185964 Jy ! Total flux subtracted in 200 components = 0.00185964 Jy ! Clean residual min=-0.000287 max=0.000258 Jy/beam ! Clean residual mean=0.000001 rms=0.000076 Jy/beam ! Combined flux in latest and established models = 0.00595873 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 38 components and 0.00595874 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.891 mas, bmaj=12.44 mas, bpa=-9.453 degrees ! Estimated noise=5.64456 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 5.65208e-05 Jy ! Component: 100 - total flux cleaned = 6.73144e-05 Jy ! Component: 150 - total flux cleaned = 8.21976e-05 Jy ! Component: 200 - total flux cleaned = 9.108e-05 Jy ! Total flux subtracted in 200 components = 9.108e-05 Jy ! Clean residual min=-0.000196 max=0.000171 Jy/beam ! Clean residual mean=0.000002 rms=0.000064 Jy/beam ! Combined flux in latest and established models = 0.00604982 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 45 components and 0.00604981 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.168 mas, bmaj=3.122 mas, bpa=-10.6 degrees ! Estimated noise=4.91658 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -1.90447e-05 Jy ! Component: 100 - total flux cleaned = -5.19643e-06 Jy ! Component: 150 - total flux cleaned = 7.23964e-06 Jy ! Component: 200 - total flux cleaned = 1.25238e-05 Jy ! Total flux subtracted in 200 components = 1.25238e-05 Jy ! Clean residual min=-0.000206 max=0.000215 Jy/beam ! Clean residual mean=0.000002 rms=0.000059 Jy/beam ! Combined flux in latest and established models = 0.00606234 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 57 components and 0.00606234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073578Jy sigma=0.004327 ! Fit after self-cal, rms=0.073575Jy sigma=0.004167 wmodel J0106-4034_X_1994_08_12_yyk\_map.mod ! Writing 57 model components to file: J0106-4034_X_1994_08_12_yyk_map.mod wobs J0106-4034_X_1994_08_12_yyk\_uvs.fits ! Writing UV FITS file: J0106-4034_X_1994_08_12_yyk_uvs.fits wwins J0106-4034_X_1994_08_12_yyk\_map.win ! wwins: Wrote 2 windows to J0106-4034_X_1994_08_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -7.88495e-05 Jy ! Component: 100 - total flux cleaned = -9.97246e-05 Jy ! Component: 150 - total flux cleaned = -0.000104733 Jy ! Component: 200 - total flux cleaned = -0.000104798 Jy ! Component: 250 - total flux cleaned = -0.000114585 Jy ! Component: 300 - total flux cleaned = -0.000127522 Jy ! Component: 350 - total flux cleaned = -0.000134568 Jy ! Component: 400 - total flux cleaned = -0.000136293 Jy ! Component: 450 - total flux cleaned = -0.000133144 Jy ! Component: 500 - total flux cleaned = -0.000133198 Jy ! Component: 550 - total flux cleaned = -0.00013031 Jy ! Component: 600 - total flux cleaned = -0.000128917 Jy ! Component: 650 - total flux cleaned = -0.000124768 Jy ! Component: 700 - total flux cleaned = -0.000120786 Jy ! Component: 750 - total flux cleaned = -0.000118205 Jy ! Component: 800 - total flux cleaned = -0.000118214 Jy ! Component: 850 - total flux cleaned = -0.000119449 Jy ! Component: 900 - total flux cleaned = -0.000120664 Jy ! Component: 950 - total flux cleaned = -0.000122995 Jy ! Component: 1000 - total flux cleaned = -0.000123015 Jy ! Component: 1050 - total flux cleaned = -0.000123001 Jy ! Component: 1100 - total flux cleaned = -0.000119776 Jy ! Component: 1150 - total flux cleaned = -0.00011665 Jy ! Component: 1200 - total flux cleaned = -0.000112534 Jy ! Component: 1250 - total flux cleaned = -0.000105501 Jy ! Component: 1300 - total flux cleaned = -0.000100604 Jy ! Component: 1350 - total flux cleaned = -9.57859e-05 Jy ! Component: 1400 - total flux cleaned = -8.91754e-05 Jy ! Component: 1450 - total flux cleaned = -8.1759e-05 Jy ! Component: 1500 - total flux cleaned = -7.3551e-05 Jy ! Component: 1550 - total flux cleaned = -6.72803e-05 Jy ! Component: 1600 - total flux cleaned = -5.9354e-05 Jy ! Component: 1650 - total flux cleaned = -5.1556e-05 Jy ! Component: 1700 - total flux cleaned = -4.38859e-05 Jy ! Component: 1750 - total flux cleaned = -3.46783e-05 Jy ! Component: 1800 - total flux cleaned = -2.72656e-05 Jy ! Component: 1850 - total flux cleaned = -1.99608e-05 Jy ! Component: 1900 - total flux cleaned = -1.03816e-05 Jy ! Component: 1950 - total flux cleaned = 6.42169e-07 Jy ! Component: 2000 - total flux cleaned = 1.07331e-05 Jy ! Total flux subtracted in 2048 components = 1.99248e-05 Jy ! Clean residual min=-0.000038 max=0.000039 Jy/beam ! Clean residual mean=0.000001 rms=0.000014 Jy/beam ! Combined flux in latest and established models = 0.00608226 Jy keep ! Adding 96 model components to the UV plane model. ! The established model now contains 151 components and 0.00608227 Jy ![Exited script file: muppet] wmap "J0106-4034_X_1994_08_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.168 x 3.122 at -10.6 degrees (North through East) ! Clean map min=-0.0014167 max=0.0050392 Jy/beam ! Writing clean map to FITS file: J0106-4034_X_1994_08_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0050392 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 1.43244e-05 device "J0106-4034_X_1994_08_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J0106-4034_X_1994_08_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.852777 0.852777 1.70555 3.41111 6.82221 13.6444 27.2889 54.5777 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.005 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.168 x 3.122 at -10.6 degrees (North through East) ! Clean map min=-0.0014167 max=0.0050392 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0106-4034_X_1994_08_12_yyk\_map.gif/gif" ! Attempting to open device: 'J0106-4034_X_1994_08_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0106-4034_X_1994_08_12_yyk_uvs.log closed on Mon Jan 8 02:01:35 2007