! Started logfile: J0106-0155_X_1997_05_07_yyk_uvs.log on Mon Jan  8 02:00:26 2007
obs J0106-0155_X_1997_05_07_yyk_uva.fits
! Reading UV FITS file: J0106-0155_X_1997_05_07_yyk_uva.fits
! AN table 1: 150 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.793481 visibilities/baseline/integration-bin.
! Found source: J0106-0155
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.15447e+09        8e+06          1        8e+06
!  02        2  8.23447e+09        8e+06          1        8e+06
!  03        3  8.41447e+09        8e+06          1        8e+06
!  04        4  8.55447e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 613 lines of history.
! 
! Reading 21424 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0106-0155_X_1997_05_07_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.269505 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7872 mas, bmaj=1.966 mas, bpa=-3.78 degrees
! Estimated noise=1177.65 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.2, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.142216 Jy
! Component: 100  -  total flux cleaned = 0.190925 Jy
! Total flux subtracted in 100 components = 0.190925 Jy
! Clean residual min=-0.009515 max=0.026875 Jy/beam
! Clean residual mean=0.000127 rms=0.003270 Jy/beam
! Combined flux in latest and established models = 0.190925 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.190925 Jy
! 
! Correcting IF 1.
!  A total of 167 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 167 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 167 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 167 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.196024Jy  sigma=0.001297
! Fit after  self-cal, rms=0.195807Jy  sigma=0.001295
! Inverting map and beam 
! Estimated beam: bmin=0.7872 mas, bmaj=1.966 mas, bpa=-3.78 degrees
! Estimated noise=1177.65 mJy/beam.
! Added new window around map position (-0.8, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0287725 Jy
! Component: 100  -  total flux cleaned = 0.0409511 Jy
! Total flux subtracted in 100 components = 0.0409511 Jy
! Clean residual min=-0.007359 max=0.011718 Jy/beam
! Clean residual mean=0.000107 rms=0.002322 Jy/beam
! Combined flux in latest and established models = 0.231876 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 30 components and 0.231876 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.192015Jy  sigma=0.001266
! Fit after  self-cal, rms=0.191968Jy  sigma=0.001266
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9778 mas, bmaj=2.394 mas, bpa=-6.673 degrees
! Estimated noise=716.686 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.014156 Jy
! Component: 100  -  total flux cleaned = 0.0210069 Jy
! Component: 150  -  total flux cleaned = 0.0245608 Jy
! Component: 200  -  total flux cleaned = 0.0257512 Jy
! Total flux subtracted in 200 components = 0.0257512 Jy
! Clean residual min=-0.008282 max=0.012518 Jy/beam
! Clean residual mean=0.000133 rms=0.002943 Jy/beam
! Combined flux in latest and established models = 0.257627 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 56 components and 0.257627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.191413Jy  sigma=0.001261
! Fit after  self-cal, rms=0.191399Jy  sigma=0.001261
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9778 x 2.394 at -6.673 degrees (North through East)
! Clean map  min=-0.0081314  max=0.15488 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.01318
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.05     KP        0.97     
!   LA        0.99     MK        0.90     NL        1.09     OV        1.04     
!   PT        0.91     SC        0.90     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.01712
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.03     KP        0.97     
!   LA        0.97     MK        0.88     NL        1.02     OV        1.08     
!   PT        0.90     SC        0.96     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.191399Jy  sigma=0.001261
! Fit after  self-cal, rms=0.192089Jy  sigma=0.001259
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.192089Jy  sigma=0.001259
! Fit after  self-cal, rms=0.192095Jy  sigma=0.001259
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9504 mas, bmaj=2.37 mas, bpa=-7.072 degrees
! Estimated noise=710.809 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00201728 Jy
! Component: 100  -  total flux cleaned = 0.00209179 Jy
! Component: 150  -  total flux cleaned = 0.00214907 Jy
! Component: 200  -  total flux cleaned = 0.00220021 Jy
! Total flux subtracted in 200 components = 0.00220021 Jy
! Clean residual min=-0.007294 max=0.011075 Jy/beam
! Clean residual mean=0.000110 rms=0.002668 Jy/beam
! Combined flux in latest and established models = 0.259828 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 65 components and 0.259828 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.192054Jy  sigma=0.001259
! Fit after  self-cal, rms=0.192050Jy  sigma=0.001259
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.192050Jy  sigma=0.001259
! Fit after  self-cal, rms=0.188591Jy  sigma=0.001236
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00275096 Jy
! Component: 100  -  total flux cleaned = 0.00321425 Jy
! Component: 150  -  total flux cleaned = 0.00363297 Jy
! Component: 200  -  total flux cleaned = 0.00397131 Jy
! Total flux subtracted in 200 components = 0.00397131 Jy
! Clean residual min=-0.007187 max=0.011342 Jy/beam
! Clean residual mean=0.000118 rms=0.002680 Jy/beam
! Combined flux in latest and established models = 0.263799 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 70 components and 0.263799 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.188536Jy  sigma=0.001236
! Fit after  self-cal, rms=0.188138Jy  sigma=0.001233
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9504 x 2.37 at -7.072 degrees (North through East)
! Clean map  min=-0.0066549  max=0.15397 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.188138Jy  sigma=0.001233
! Fit after  self-cal, rms=0.185557Jy  sigma=0.001231
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.185557Jy  sigma=0.001231
! Fit after  self-cal, rms=0.185477Jy  sigma=0.001230
! Inverting map and beam 
! Estimated beam: bmin=0.9423 mas, bmaj=2.371 mas, bpa=-7.463 degrees
! Estimated noise=696.615 mJy/beam.
! Added new window around map position (-3.6, 7).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119226 Jy
! Component: 100  -  total flux cleaned = 0.0167368 Jy
! Component: 150  -  total flux cleaned = 0.0184604 Jy
! Component: 200  -  total flux cleaned = 0.0195605 Jy
! Total flux subtracted in 200 components = 0.0195605 Jy
! Clean residual min=-0.005706 max=0.007030 Jy/beam
! Clean residual mean=0.000053 rms=0.001827 Jy/beam
! Combined flux in latest and established models = 0.283359 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 38 model components to the UV plane model.
! The established model now contains 105 components and 0.283359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.184971Jy  sigma=0.001227
! Fit after  self-cal, rms=0.184898Jy  sigma=0.001226
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.184898Jy  sigma=0.001226
! Fit after  self-cal, rms=0.183759Jy  sigma=0.001224
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.183759Jy  sigma=0.001224
! Fit after  self-cal, rms=0.183738Jy  sigma=0.001224
! Inverting map and beam 
! Estimated beam: bmin=0.9197 mas, bmaj=2.345 mas, bpa=-7.623 degrees
! Estimated noise=684.779 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00152473 Jy
! Component: 100  -  total flux cleaned = 0.0019036 Jy
! Component: 150  -  total flux cleaned = 0.00205882 Jy
! Component: 200  -  total flux cleaned = 0.00212481 Jy
! Total flux subtracted in 200 components = 0.00212481 Jy
! Clean residual min=-0.005177 max=0.006508 Jy/beam
! Clean residual mean=0.000035 rms=0.001616 Jy/beam
! Combined flux in latest and established models = 0.285484 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 119 components and 0.285484 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.183661Jy  sigma=0.001223
! Fit after  self-cal, rms=0.183646Jy  sigma=0.001223
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.42 mas, bmaj=3.898 mas, bpa=8.034 degrees
! Estimated noise=871.903 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00184799 Jy
! Component: 100  -  total flux cleaned = 0.00260417 Jy
! Component: 150  -  total flux cleaned = 0.0027398 Jy
! Component: 200  -  total flux cleaned = 0.00280342 Jy
! Total flux subtracted in 200 components = 0.00280342 Jy
! Clean residual min=-0.006967 max=0.008670 Jy/beam
! Clean residual mean=0.000060 rms=0.002446 Jy/beam
! Combined flux in latest and established models = 0.288288 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 126 components and 0.288288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.183648Jy  sigma=0.001223
! Fit after  self-cal, rms=0.183633Jy  sigma=0.001223
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7654 mas, bmaj=1.944 mas, bpa=-4.147 degrees
! Estimated noise=1126.47 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.143064 Jy
! Component: 100  -  total flux cleaned = 0.195483 Jy
! Component: 150  -  total flux cleaned = 0.220253 Jy
! Component: 200  -  total flux cleaned = 0.234142 Jy
! Total flux subtracted in 200 components = 0.234142 Jy
! Clean residual min=-0.006097 max=0.010455 Jy/beam
! Clean residual mean=0.000061 rms=0.001960 Jy/beam
! Combined flux in latest and established models = 0.234142 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 42 model components to the UV plane model.
! The established model now contains 42 components and 0.234142 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9197 mas, bmaj=2.345 mas, bpa=-7.623 degrees
! Estimated noise=684.779 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.6, -0.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0173549 Jy
! Component: 100  -  total flux cleaned = 0.0275923 Jy
! Component: 150  -  total flux cleaned = 0.0349557 Jy
! Component: 200  -  total flux cleaned = 0.0404518 Jy
! Total flux subtracted in 200 components = 0.0404518 Jy
! Clean residual min=-0.005484 max=0.007799 Jy/beam
! Clean residual mean=0.000048 rms=0.001661 Jy/beam
! Combined flux in latest and established models = 0.274594 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 90 components and 0.274594 Jy
! Inverting map 
! Added new window around map position (10.4, 0.4).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00825809 Jy
! Component: 100  -  total flux cleaned = 0.0125848 Jy
! Component: 150  -  total flux cleaned = 0.0145557 Jy
! Component: 200  -  total flux cleaned = 0.0161056 Jy
! Total flux subtracted in 200 components = 0.0161056 Jy
! Clean residual min=-0.004242 max=0.004296 Jy/beam
! Clean residual mean=0.000018 rms=0.001274 Jy/beam
! Combined flux in latest and established models = 0.290699 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 121 components and 0.290699 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.42 mas, bmaj=3.898 mas, bpa=8.034 degrees
! Estimated noise=871.903 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00343331 Jy
! Component: 100  -  total flux cleaned = 0.00501354 Jy
! Component: 150  -  total flux cleaned = 0.00549015 Jy
! Component: 200  -  total flux cleaned = 0.00574886 Jy
! Total flux subtracted in 200 components = 0.00574886 Jy
! Clean residual min=-0.004829 max=0.005495 Jy/beam
! Clean residual mean=0.000017 rms=0.001745 Jy/beam
! Combined flux in latest and established models = 0.296448 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 144 components and 0.296448 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9197 mas, bmaj=2.345 mas, bpa=-7.623 degrees
! Estimated noise=684.779 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00137154 Jy
! Component: 100  -  total flux cleaned = -0.00111683 Jy
! Component: 150  -  total flux cleaned = -0.000740129 Jy
! Component: 200  -  total flux cleaned = -0.00046813 Jy
! Total flux subtracted in 200 components = -0.00046813 Jy
! Clean residual min=-0.003881 max=0.003937 Jy/beam
! Clean residual mean=0.000008 rms=0.001168 Jy/beam
! Combined flux in latest and established models = 0.29598 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 167 components and 0.29598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.183039Jy  sigma=0.001220
! Fit after  self-cal, rms=0.182991Jy  sigma=0.001219
wmodel J0106-0155_X_1997_05_07_yyk\_map.mod
! Writing 167 model components to file: J0106-0155_X_1997_05_07_yyk_map.mod
wobs J0106-0155_X_1997_05_07_yyk\_uvs.fits
! Writing UV FITS file: J0106-0155_X_1997_05_07_yyk_uvs.fits
wwins J0106-0155_X_1997_05_07_yyk\_map.win
! wwins: Wrote 5 windows to J0106-0155_X_1997_05_07_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000352965 Jy
! Component: 100  -  total flux cleaned = -0.000880608 Jy
! Component: 150  -  total flux cleaned = -0.00119675 Jy
! Component: 200  -  total flux cleaned = -0.00119441 Jy
! Component: 250  -  total flux cleaned = -0.00130936 Jy
! Component: 300  -  total flux cleaned = -0.00153305 Jy
! Component: 350  -  total flux cleaned = -0.0017474 Jy
! Component: 400  -  total flux cleaned = -0.00185246 Jy
! Component: 450  -  total flux cleaned = -0.00200483 Jy
! Component: 500  -  total flux cleaned = -0.00220169 Jy
! Component: 550  -  total flux cleaned = -0.00229626 Jy
! Component: 600  -  total flux cleaned = -0.00243551 Jy
! Component: 650  -  total flux cleaned = -0.0025713 Jy
! Component: 700  -  total flux cleaned = -0.00270482 Jy
! Component: 750  -  total flux cleaned = -0.00296522 Jy
! Component: 800  -  total flux cleaned = -0.0032184 Jy
! Component: 850  -  total flux cleaned = -0.00334233 Jy
! Component: 900  -  total flux cleaned = -0.00354473 Jy
! Component: 950  -  total flux cleaned = -0.00378282 Jy
! Component: 1000  -  total flux cleaned = -0.00401623 Jy
! Component: 1050  -  total flux cleaned = -0.00420748 Jy
! Component: 1100  -  total flux cleaned = -0.00450801 Jy
! Component: 1150  -  total flux cleaned = -0.00461826 Jy
! Component: 1200  -  total flux cleaned = -0.00487175 Jy
! Component: 1250  -  total flux cleaned = -0.00501407 Jy
! Component: 1300  -  total flux cleaned = -0.0051896 Jy
! Component: 1350  -  total flux cleaned = -0.00536224 Jy
! Component: 1400  -  total flux cleaned = -0.00553135 Jy
! Component: 1450  -  total flux cleaned = -0.0056974 Jy
! Component: 1500  -  total flux cleaned = -0.00586114 Jy
! Component: 1550  -  total flux cleaned = -0.00602318 Jy
! Component: 1600  -  total flux cleaned = -0.00630886 Jy
! Component: 1650  -  total flux cleaned = -0.00646514 Jy
! Component: 1700  -  total flux cleaned = -0.00665001 Jy
! Component: 1750  -  total flux cleaned = -0.00686191 Jy
! Component: 1800  -  total flux cleaned = -0.00695165 Jy
! Component: 1850  -  total flux cleaned = -0.0071875 Jy
! Component: 1900  -  total flux cleaned = -0.0073617 Jy
! Component: 1950  -  total flux cleaned = -0.00753351 Jy
! Component: 2000  -  total flux cleaned = -0.00761833 Jy
! Total flux subtracted in 2048 components = -0.00770249 Jy
! Clean residual min=-0.001528 max=0.001461 Jy/beam
! Clean residual mean=0.000000 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.288278 Jy
keep
! Adding 139 model components to the UV plane model.
! The established model now contains 306 components and 0.288278 Jy
![Exited script file: muppet]
wmap "J0106-0155_X_1997_05_07_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9197 x 2.345 at -7.623 degrees (North through East)
! Clean map  min=-0.0031753  max=0.15205 Jy/beam
! Writing clean map to FITS file: J0106-0155_X_1997_05_07_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.152055 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000548747 
device "J0106-0155_X_1997_05_07_yyk\_map.eps/VPS"
! Attempting to open device: 'J0106-0155_X_1997_05_07_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.08266 1.08266 2.16533 4.33066 8.66131 17.3226 34.6452 69.2905
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0016 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.152 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9197 x 2.345 at -7.623 degrees (North through East)
! Clean map  min=-0.0031753  max=0.15205 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0106-0155_X_1997_05_07_yyk\_map.gif/gif"
! Attempting to open device: 'J0106-0155_X_1997_05_07_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0106-0155_X_1997_05_07_yyk_uvs.log closed on Mon Jan  8 02:00:37 2007