! Started logfile: J0104-2416_X_1997_07_02_yyk_uvs.log on Mon Jan 8 01:59:43 2007 obs J0104-2416_X_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J0104-2416_X_1997_07_02_yyk_uva.fits ! AN table 1: 147 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1.84399 visibilities/baseline/integration-bin. ! Found source: J0104-2416 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 753 lines of history. ! ! Reading 48792 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0104-2416_X_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.265812 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6928 mas, bmaj=1.824 mas, bpa=-2.666 degrees ! Estimated noise=947.304 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.143715 Jy ! Component: 100 - total flux cleaned = 0.165033 Jy ! Total flux subtracted in 100 components = 0.165033 Jy ! Clean residual min=-0.006852 max=0.008351 Jy/beam ! Clean residual mean=-0.000002 rms=0.001888 Jy/beam ! Combined flux in latest and established models = 0.165033 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.165033 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.204950Jy sigma=0.001689 ! Fit after self-cal, rms=0.204886Jy sigma=0.001689 ! Inverting map and beam ! Estimated beam: bmin=0.6928 mas, bmaj=1.824 mas, bpa=-2.666 degrees ! Estimated noise=947.304 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9142 mas, bmaj=2.431 mas, bpa=-2.128 degrees ! Estimated noise=495.879 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124344 Jy ! Component: 100 - total flux cleaned = 0.016681 Jy ! Component: 150 - total flux cleaned = 0.018483 Jy ! Component: 200 - total flux cleaned = 0.0189118 Jy ! Total flux subtracted in 200 components = 0.0189118 Jy ! Clean residual min=-0.004285 max=0.004739 Jy/beam ! Clean residual mean=-0.000027 rms=0.001152 Jy/beam ! Combined flux in latest and established models = 0.183945 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 31 components and 0.183945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204654Jy sigma=0.001684 ! Fit after self-cal, rms=0.204652Jy sigma=0.001684 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9142 x 2.431 at -2.128 degrees (North through East) ! Clean map min=-0.0041682 max=0.17095 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.996933 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 1.05 KP 1.00 ! LA 0.97 MK 1.06 NL 1.09 OV 0.97 ! PT 0.92 SC 0.92 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.0069 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.02 KP 1.00 ! LA 0.98 MK 0.98 NL 1.07 OV 1.06 ! PT 0.89 SC 0.94 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.988141 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.06 HN 1.07 KP 0.99 ! LA 0.97 MK 1.02 NL 1.06 OV 0.97 ! PT 0.95 SC 1.04 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.970536 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.98 HN 1.17 KP 0.94 ! LA 1.01 MK 0.99 NL 1.12 OV 1.03 ! PT 0.98 SC 1.04 ! ! ! Fit before self-cal, rms=0.204652Jy sigma=0.001684 ! Fit after self-cal, rms=0.207613Jy sigma=0.001681 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207613Jy sigma=0.001681 ! Fit after self-cal, rms=0.207615Jy sigma=0.001681 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9234 mas, bmaj=2.437 mas, bpa=-1.402 degrees ! Estimated noise=487.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00381046 Jy ! Component: 100 - total flux cleaned = -0.00461954 Jy ! Component: 150 - total flux cleaned = -0.00476867 Jy ! Component: 200 - total flux cleaned = -0.00486196 Jy ! Total flux subtracted in 200 components = -0.00486196 Jy ! Clean residual min=-0.003080 max=0.003257 Jy/beam ! Clean residual mean=0.000002 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.179083 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.179083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207545Jy sigma=0.001681 ! Fit after self-cal, rms=0.207544Jy sigma=0.001681 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207544Jy sigma=0.001681 ! Fit after self-cal, rms=0.204646Jy sigma=0.001655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.6, 15.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00299905 Jy ! Component: 100 - total flux cleaned = 0.00291001 Jy ! Component: 150 - total flux cleaned = 0.002835 Jy ! Component: 200 - total flux cleaned = 0.00270389 Jy ! Total flux subtracted in 200 components = 0.00270389 Jy ! Clean residual min=-0.002957 max=0.002915 Jy/beam ! Clean residual mean=0.000008 rms=0.000772 Jy/beam ! Combined flux in latest and established models = 0.181787 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 56 components and 0.181787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204560Jy sigma=0.001654 ! Fit after self-cal, rms=0.204111Jy sigma=0.001651 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9234 x 2.437 at -1.402 degrees (North through East) ! Clean map min=-0.002718 max=0.17192 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204111Jy sigma=0.001651 ! Fit after self-cal, rms=0.206251Jy sigma=0.001649 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206251Jy sigma=0.001649 ! Fit after self-cal, rms=0.206162Jy sigma=0.001648 ! Inverting map and beam ! Estimated beam: bmin=0.9227 mas, bmaj=2.439 mas, bpa=-1.149 degrees ! Estimated noise=480.683 mJy/beam. ! Added new window around map position (-23, -10.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022374 Jy ! Component: 100 - total flux cleaned = 0.00223293 Jy ! Component: 150 - total flux cleaned = 0.00217771 Jy ! Component: 200 - total flux cleaned = 0.00207828 Jy ! Total flux subtracted in 200 components = 0.00207828 Jy ! Clean residual min=-0.002153 max=0.002374 Jy/beam ! Clean residual mean=-0.000000 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.183865 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 83 components and 0.183865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206116Jy sigma=0.001648 ! Fit after self-cal, rms=0.206089Jy sigma=0.001648 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206089Jy sigma=0.001648 ! Fit after self-cal, rms=0.206368Jy sigma=0.001647 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206368Jy sigma=0.001647 ! Fit after self-cal, rms=0.206356Jy sigma=0.001647 ! Inverting map and beam ! Estimated beam: bmin=0.9265 mas, bmaj=2.449 mas, bpa=-1.137 degrees ! Estimated noise=480.649 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000835281 Jy ! Component: 100 - total flux cleaned = 0.000894951 Jy ! Component: 150 - total flux cleaned = 0.000898266 Jy ! Component: 200 - total flux cleaned = 0.000899828 Jy ! Total flux subtracted in 200 components = 0.000899828 Jy ! Clean residual min=-0.002165 max=0.002418 Jy/beam ! Clean residual mean=0.000005 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.184765 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 98 components and 0.184765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206330Jy sigma=0.001647 ! Fit after self-cal, rms=0.206326Jy sigma=0.001647 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.413 mas, bmaj=5.739 mas, bpa=2.01 degrees ! Estimated noise=603.429 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000254277 Jy ! Component: 100 - total flux cleaned = 0.00013353 Jy ! Component: 150 - total flux cleaned = 0.00010962 Jy ! Component: 200 - total flux cleaned = 0.000108718 Jy ! Total flux subtracted in 200 components = 0.000108718 Jy ! Clean residual min=-0.002448 max=0.002448 Jy/beam ! Clean residual mean=0.000014 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.184874 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 114 components and 0.184874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206320Jy sigma=0.001647 ! Fit after self-cal, rms=0.206318Jy sigma=0.001647 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6959 mas, bmaj=1.828 mas, bpa=-1.999 degrees ! Estimated noise=931.337 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.144575 Jy ! Component: 100 - total flux cleaned = 0.165847 Jy ! Component: 150 - total flux cleaned = 0.172655 Jy ! Component: 200 - total flux cleaned = 0.176003 Jy ! Total flux subtracted in 200 components = 0.176003 Jy ! Clean residual min=-0.005271 max=0.005961 Jy/beam ! Clean residual mean=0.000008 rms=0.001403 Jy/beam ! Combined flux in latest and established models = 0.176003 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.176003 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9265 mas, bmaj=2.449 mas, bpa=-1.137 degrees ! Estimated noise=480.649 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0057176 Jy ! Component: 100 - total flux cleaned = 0.00779309 Jy ! Component: 150 - total flux cleaned = 0.00872397 Jy ! Component: 200 - total flux cleaned = 0.00892726 Jy ! Total flux subtracted in 200 components = 0.00892726 Jy ! Clean residual min=-0.002214 max=0.002275 Jy/beam ! Clean residual mean=0.000003 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.18493 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 43 components and 0.18493 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.413 mas, bmaj=5.739 mas, bpa=2.01 degrees ! Estimated noise=603.429 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000246791 Jy ! Component: 100 - total flux cleaned = 0.000239649 Jy ! Component: 150 - total flux cleaned = 0.000305678 Jy ! Component: 200 - total flux cleaned = 0.000332902 Jy ! Total flux subtracted in 200 components = 0.000332902 Jy ! Clean residual min=-0.002383 max=0.002478 Jy/beam ! Clean residual mean=0.000015 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.185263 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 61 components and 0.185263 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9265 mas, bmaj=2.449 mas, bpa=-1.137 degrees ! Estimated noise=480.649 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 4.19651e-05 Jy ! Component: 100 - total flux cleaned = 8.86353e-05 Jy ! Component: 150 - total flux cleaned = 9.03296e-05 Jy ! Component: 200 - total flux cleaned = 0.000130381 Jy ! Total flux subtracted in 200 components = 0.000130381 Jy ! Clean residual min=-0.002083 max=0.002267 Jy/beam ! Clean residual mean=0.000007 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.185394 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 80 components and 0.185394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206323Jy sigma=0.001647 ! Fit after self-cal, rms=0.206323Jy sigma=0.001647 wmodel J0104-2416_X_1997_07_02_yyk\_map.mod ! Writing 80 model components to file: J0104-2416_X_1997_07_02_yyk_map.mod wobs J0104-2416_X_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J0104-2416_X_1997_07_02_yyk_uvs.fits wwins J0104-2416_X_1997_07_02_yyk\_map.win ! wwins: Wrote 3 windows to J0104-2416_X_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00037621 Jy ! Component: 100 - total flux cleaned = 0.000756959 Jy ! Component: 150 - total flux cleaned = 0.000829588 Jy ! Component: 200 - total flux cleaned = 0.000829107 Jy ! Component: 250 - total flux cleaned = 0.000829364 Jy ! Component: 300 - total flux cleaned = 0.000829488 Jy ! Component: 350 - total flux cleaned = 0.000767435 Jy ! Component: 400 - total flux cleaned = 0.00067678 Jy ! Component: 450 - total flux cleaned = 0.000530295 Jy ! Component: 500 - total flux cleaned = 0.00053052 Jy ! Component: 550 - total flux cleaned = 0.000446208 Jy ! Component: 600 - total flux cleaned = 0.00036318 Jy ! Component: 650 - total flux cleaned = 0.000308793 Jy ! Component: 700 - total flux cleaned = 0.000255597 Jy ! Component: 750 - total flux cleaned = 0.00025583 Jy ! Component: 800 - total flux cleaned = 0.00022971 Jy ! Component: 850 - total flux cleaned = 0.000229531 Jy ! Component: 900 - total flux cleaned = 0.000204279 Jy ! Component: 950 - total flux cleaned = 0.000204404 Jy ! Component: 1000 - total flux cleaned = 0.000253522 Jy ! Component: 1050 - total flux cleaned = 0.000277963 Jy ! Component: 1100 - total flux cleaned = 0.000325869 Jy ! Component: 1150 - total flux cleaned = 0.000349657 Jy ! Component: 1200 - total flux cleaned = 0.000396532 Jy ! Component: 1250 - total flux cleaned = 0.000373069 Jy ! Component: 1300 - total flux cleaned = 0.000373271 Jy ! Component: 1350 - total flux cleaned = 0.000328253 Jy ! Component: 1400 - total flux cleaned = 0.000440965 Jy ! Component: 1450 - total flux cleaned = 0.000507597 Jy ! Component: 1500 - total flux cleaned = 0.000507717 Jy ! Component: 1550 - total flux cleaned = 0.000551233 Jy ! Component: 1600 - total flux cleaned = 0.000616169 Jy ! Component: 1650 - total flux cleaned = 0.000594849 Jy ! Component: 1700 - total flux cleaned = 0.000679879 Jy ! Component: 1750 - total flux cleaned = 0.000721926 Jy ! Component: 1800 - total flux cleaned = 0.000742911 Jy ! Component: 1850 - total flux cleaned = 0.000866864 Jy ! Component: 1900 - total flux cleaned = 0.000825833 Jy ! Component: 1950 - total flux cleaned = 0.000887125 Jy ! Component: 2000 - total flux cleaned = 0.00098784 Jy ! Total flux subtracted in 2048 components = 0.00100784 Jy ! Clean residual min=-0.001070 max=0.001351 Jy/beam ! Clean residual mean=0.000005 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.186401 Jy keep ! Adding 122 model components to the UV plane model. ! The established model now contains 202 components and 0.186401 Jy ![Exited script file: muppet] wmap "J0104-2416_X_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9265 x 2.449 at -1.137 degrees (North through East) ! Clean map min=-0.002646 max=0.16996 Jy/beam ! Writing clean map to FITS file: J0104-2416_X_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.169958 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000374352 device "J0104-2416_X_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J0104-2416_X_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.660786 0.660786 1.32157 2.64314 5.28628 10.5726 21.1451 42.2903 84.5806 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.169 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9265 x 2.449 at -1.137 degrees (North through East) ! Clean map min=-0.002646 max=0.16996 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0104-2416_X_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J0104-2416_X_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0104-2416_X_1997_07_02_yyk_uvs.log closed on Mon Jan 8 01:59:53 2007