! Started logfile: J0104-2416_S_1997_08_27_yyk_uvs.log on Sun Jan 7 15:33:11 2007 obs J0104-2416_S_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J0104-2416_S_1997_08_27_yyk_uva.fits ! AN table 1: 142 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.865884 visibilities/baseline/integration-bin. ! Found source: J0104-2416 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 702 lines of history. ! ! Reading 22132 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0104-2416_S_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.408306 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.665 mas, bmaj=6.972 mas, bpa=-1.652 degrees ! Estimated noise=2709.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.146205 Jy ! Component: 100 - total flux cleaned = 0.174273 Jy ! Total flux subtracted in 100 components = 0.174273 Jy ! Clean residual min=-0.016872 max=0.018758 Jy/beam ! Clean residual mean=0.000023 rms=0.004362 Jy/beam ! Combined flux in latest and established models = 0.174273 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.174273 Jy ! ! Correcting IF 1. ! A total of 252 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.366611Jy sigma=0.001199 ! Fit after self-cal, rms=0.365310Jy sigma=0.001197 ! Inverting map and beam ! Estimated beam: bmin=2.665 mas, bmaj=6.972 mas, bpa=-1.652 degrees ! Estimated noise=2710.25 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=9.779 mas, bpa=-7.672 degrees ! Estimated noise=1282.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00945387 Jy ! Component: 100 - total flux cleaned = 0.00869356 Jy ! Component: 150 - total flux cleaned = 0.00809853 Jy ! Component: 200 - total flux cleaned = 0.00760361 Jy ! Total flux subtracted in 200 components = 0.00760361 Jy ! Clean residual min=-0.007087 max=0.007731 Jy/beam ! Clean residual mean=0.000046 rms=0.002043 Jy/beam ! Combined flux in latest and established models = 0.181877 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 21 components and 0.181877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.364730Jy sigma=0.001195 ! Fit after self-cal, rms=0.364729Jy sigma=0.001195 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.475 x 9.779 at -7.672 degrees (North through East) ! Clean map min=-0.0068617 max=0.18143 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00851 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.06 HN 1.17 KP 0.97 ! LA 0.89 MK 1.03 NL 0.98 OV 0.97 ! PT 0.94 SC 0.88 ! ! ! Fit before self-cal, rms=0.364729Jy sigma=0.001195 ! Fit after self-cal, rms=0.363033Jy sigma=0.001195 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.363033Jy sigma=0.001195 ! Fit after self-cal, rms=0.363032Jy sigma=0.001195 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.491 mas, bmaj=9.68 mas, bpa=-6.959 degrees ! Estimated noise=1279.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000699938 Jy ! Component: 100 - total flux cleaned = -0.000980693 Jy ! Component: 150 - total flux cleaned = -0.00121844 Jy ! Component: 200 - total flux cleaned = -0.00148691 Jy ! Total flux subtracted in 200 components = -0.00148691 Jy ! Clean residual min=-0.007711 max=0.007072 Jy/beam ! Clean residual mean=0.000017 rms=0.001916 Jy/beam ! Combined flux in latest and established models = 0.18039 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 27 components and 0.18039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.362989Jy sigma=0.001195 ! Fit after self-cal, rms=0.362989Jy sigma=0.001195 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.362989Jy sigma=0.001195 ! Fit after self-cal, rms=0.361892Jy sigma=0.001192 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107152 Jy ! Component: 100 - total flux cleaned = 0.00101283 Jy ! Component: 150 - total flux cleaned = 0.000905698 Jy ! Component: 200 - total flux cleaned = 0.000764351 Jy ! Total flux subtracted in 200 components = 0.000764351 Jy ! Clean residual min=-0.007887 max=0.006836 Jy/beam ! Clean residual mean=0.000018 rms=0.001928 Jy/beam ! Combined flux in latest and established models = 0.181154 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 38 components and 0.181154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.361862Jy sigma=0.001192 ! Fit after self-cal, rms=0.361769Jy sigma=0.001191 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.491 x 9.68 at -6.959 degrees (North through East) ! Clean map min=-0.0075506 max=0.1838 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.361769Jy sigma=0.001191 ! Fit after self-cal, rms=0.360879Jy sigma=0.001191 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.360879Jy sigma=0.001191 ! Fit after self-cal, rms=0.360835Jy sigma=0.001191 ! Inverting map and beam ! Estimated beam: bmin=3.525 mas, bmaj=9.776 mas, bpa=-6.798 degrees ! Estimated noise=1272.09 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00204327 Jy ! Component: 100 - total flux cleaned = -0.00212906 Jy ! Component: 150 - total flux cleaned = -0.00220131 Jy ! Component: 200 - total flux cleaned = -0.00223308 Jy ! Total flux subtracted in 200 components = -0.00223308 Jy ! Clean residual min=-0.007650 max=0.006473 Jy/beam ! Clean residual mean=0.000034 rms=0.001892 Jy/beam ! Combined flux in latest and established models = 0.178921 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 44 components and 0.178921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.360824Jy sigma=0.001191 ! Fit after self-cal, rms=0.360776Jy sigma=0.001191 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.360776Jy sigma=0.001191 ! Fit after self-cal, rms=0.360116Jy sigma=0.001190 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.360116Jy sigma=0.001190 ! Fit after self-cal, rms=0.360035Jy sigma=0.001190 ! Inverting map and beam ! Estimated beam: bmin=3.532 mas, bmaj=9.864 mas, bpa=-6.148 degrees ! Estimated noise=1265.63 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000980275 Jy ! Component: 100 - total flux cleaned = -0.000983378 Jy ! Component: 150 - total flux cleaned = -0.000899812 Jy ! Component: 200 - total flux cleaned = -0.000823288 Jy ! Total flux subtracted in 200 components = -0.000823288 Jy ! Clean residual min=-0.006624 max=0.004698 Jy/beam ! Clean residual mean=-0.000068 rms=0.001645 Jy/beam ! Combined flux in latest and established models = 0.178098 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 48 components and 0.178098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.360023Jy sigma=0.001190 ! Fit after self-cal, rms=0.359972Jy sigma=0.001190 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.51 mas, bmaj=19.24 mas, bpa=4.041 degrees ! Estimated noise=1553.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000832595 Jy ! Component: 100 - total flux cleaned = 0.00102295 Jy ! Component: 150 - total flux cleaned = 0.00112534 Jy ! Component: 200 - total flux cleaned = 0.00121283 Jy ! Total flux subtracted in 200 components = 0.00121283 Jy ! Clean residual min=-0.007369 max=0.005227 Jy/beam ! Clean residual mean=-0.000137 rms=0.002025 Jy/beam ! Combined flux in latest and established models = 0.179311 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 52 components and 0.179311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.359972Jy sigma=0.001190 ! Fit after self-cal, rms=0.359946Jy sigma=0.001190 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.678 mas, bmaj=7.017 mas, bpa=-0.8418 degrees ! Estimated noise=2681.1 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.151743 Jy ! Component: 100 - total flux cleaned = 0.171399 Jy ! Component: 150 - total flux cleaned = 0.173061 Jy ! Component: 200 - total flux cleaned = 0.173674 Jy ! Total flux subtracted in 200 components = 0.173674 Jy ! Clean residual min=-0.011028 max=0.013512 Jy/beam ! Clean residual mean=-0.000023 rms=0.003296 Jy/beam ! Combined flux in latest and established models = 0.173674 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.173674 Jy ! Inverting map and beam ! Estimated beam: bmin=3.532 mas, bmaj=9.864 mas, bpa=-6.148 degrees ! Estimated noise=1265.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00560229 Jy ! Component: 100 - total flux cleaned = 0.00537487 Jy ! Component: 150 - total flux cleaned = 0.00528452 Jy ! Component: 200 - total flux cleaned = 0.00514398 Jy ! Total flux subtracted in 200 components = 0.00514398 Jy ! Clean residual min=-0.006326 max=0.004946 Jy/beam ! Clean residual mean=-0.000071 rms=0.001654 Jy/beam ! Combined flux in latest and established models = 0.178818 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 31 components and 0.178818 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.51 mas, bmaj=19.24 mas, bpa=4.041 degrees ! Estimated noise=1553.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 4.75508e-05 Jy ! Component: 100 - total flux cleaned = 0.000236096 Jy ! Component: 150 - total flux cleaned = 0.000389173 Jy ! Component: 200 - total flux cleaned = 0.000474051 Jy ! Total flux subtracted in 200 components = 0.000474051 Jy ! Clean residual min=-0.007314 max=0.005156 Jy/beam ! Clean residual mean=-0.000137 rms=0.002015 Jy/beam ! Combined flux in latest and established models = 0.179292 Jy ! Adding 4 model components to the UV plane model. ! The established model now contains 35 components and 0.179292 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.532 mas, bmaj=9.864 mas, bpa=-6.148 degrees ! Estimated noise=1265.63 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000553572 Jy ! Component: 100 - total flux cleaned = -0.00055131 Jy ! Component: 150 - total flux cleaned = -0.000613419 Jy ! Component: 200 - total flux cleaned = -0.000662348 Jy ! Total flux subtracted in 200 components = -0.000662348 Jy ! Clean residual min=-0.006308 max=0.004797 Jy/beam ! Clean residual mean=-0.000071 rms=0.001632 Jy/beam ! Combined flux in latest and established models = 0.17863 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 47 components and 0.17863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.360007Jy sigma=0.001190 ! Fit after self-cal, rms=0.359982Jy sigma=0.001190 wmodel J0104-2416_S_1997_08_27_yyk\_map.mod ! Writing 47 model components to file: J0104-2416_S_1997_08_27_yyk_map.mod wobs J0104-2416_S_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J0104-2416_S_1997_08_27_yyk_uvs.fits wwins J0104-2416_S_1997_08_27_yyk\_map.win ! wwins: Wrote 1 windows to J0104-2416_S_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00264232 Jy ! Component: 100 - total flux cleaned = -0.00373995 Jy ! Component: 150 - total flux cleaned = -0.00489681 Jy ! Component: 200 - total flux cleaned = -0.00583532 Jy ! Component: 250 - total flux cleaned = -0.00635992 Jy ! Component: 300 - total flux cleaned = -0.00672184 Jy ! Component: 350 - total flux cleaned = -0.00707484 Jy ! Component: 400 - total flux cleaned = -0.00741766 Jy ! Component: 450 - total flux cleaned = -0.00768446 Jy ! Component: 500 - total flux cleaned = -0.00801041 Jy ! Component: 550 - total flux cleaned = -0.00832832 Jy ! Component: 600 - total flux cleaned = -0.00863854 Jy ! Component: 650 - total flux cleaned = -0.00857909 Jy ! Component: 700 - total flux cleaned = -0.00864046 Jy ! Component: 750 - total flux cleaned = -0.00875658 Jy ! Component: 800 - total flux cleaned = -0.00881309 Jy ! Component: 850 - total flux cleaned = -0.00886757 Jy ! Component: 900 - total flux cleaned = -0.00892229 Jy ! Component: 950 - total flux cleaned = -0.00897533 Jy ! Component: 1000 - total flux cleaned = -0.00897546 Jy ! Component: 1050 - total flux cleaned = -0.00902677 Jy ! Component: 1100 - total flux cleaned = -0.0090776 Jy ! Component: 1150 - total flux cleaned = -0.00912675 Jy ! Component: 1200 - total flux cleaned = -0.00912603 Jy ! Component: 1250 - total flux cleaned = -0.00922156 Jy ! Component: 1300 - total flux cleaned = -0.00931461 Jy ! Component: 1350 - total flux cleaned = -0.00917554 Jy ! Component: 1400 - total flux cleaned = -0.00931251 Jy ! Component: 1450 - total flux cleaned = -0.00935742 Jy ! Component: 1500 - total flux cleaned = -0.00935759 Jy ! Component: 1550 - total flux cleaned = -0.0094443 Jy ! Component: 1600 - total flux cleaned = -0.00948629 Jy ! Component: 1650 - total flux cleaned = -0.00948641 Jy ! Component: 1700 - total flux cleaned = -0.00961059 Jy ! Component: 1750 - total flux cleaned = -0.00969226 Jy ! Component: 1800 - total flux cleaned = -0.00985357 Jy ! Component: 1850 - total flux cleaned = -0.00985402 Jy ! Component: 1900 - total flux cleaned = -0.0100901 Jy ! Component: 1950 - total flux cleaned = -0.0101288 Jy ! Component: 2000 - total flux cleaned = -0.0102059 Jy ! Total flux subtracted in 2048 components = -0.0102827 Jy ! Clean residual min=-0.001889 max=0.002524 Jy/beam ! Clean residual mean=-0.000039 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.168347 Jy keep ! Adding 124 model components to the UV plane model. ! The established model now contains 171 components and 0.168347 Jy ![Exited script file: muppet] wmap "J0104-2416_S_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.532 x 9.864 at -6.148 degrees (North through East) ! Clean map min=-0.0045626 max=0.18199 Jy/beam ! Writing clean map to FITS file: J0104-2416_S_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.181988 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000773247 device "J0104-2416_S_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J0104-2416_S_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.27467 1.27467 2.54933 5.09866 10.1973 20.3946 40.7893 81.5786 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.181 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.532 x 9.864 at -6.148 degrees (North through East) ! Clean map min=-0.0045626 max=0.18199 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0104-2416_S_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J0104-2416_S_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0104-2416_S_1997_08_27_yyk_uvs.log closed on Sun Jan 7 15:33:18 2007