! Started logfile: J0104-2416_S_1997_07_02_yyk_uvs.log on Sun Jan 7 15:33:03 2007 obs J0104-2416_S_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J0104-2416_S_1997_07_02_yyk_uva.fits ! AN table 1: 147 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1.84399 visibilities/baseline/integration-bin. ! Found source: J0104-2416 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 754 lines of history. ! ! Reading 48792 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0104-2416_S_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.387154 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.558 mas, bmaj=6.971 mas, bpa=-2.254 degrees ! Estimated noise=1754.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.157971 Jy ! Component: 100 - total flux cleaned = 0.175623 Jy ! Total flux subtracted in 100 components = 0.175623 Jy ! Clean residual min=-0.012159 max=0.016147 Jy/beam ! Clean residual mean=0.000034 rms=0.003721 Jy/beam ! Combined flux in latest and established models = 0.175623 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.175623 Jy ! ! Correcting IF 1. ! A total of 254 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.341821Jy sigma=0.001665 ! Fit after self-cal, rms=0.340934Jy sigma=0.001663 ! Inverting map and beam ! Estimated beam: bmin=2.558 mas, bmaj=6.971 mas, bpa=-2.254 degrees ! Estimated noise=1754.85 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.637 mas, bmaj=9.785 mas, bpa=-2.958 degrees ! Estimated noise=828.578 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00489695 Jy ! Component: 100 - total flux cleaned = 0.00487864 Jy ! Component: 150 - total flux cleaned = 0.0048811 Jy ! Component: 200 - total flux cleaned = 0.00511178 Jy ! Total flux subtracted in 200 components = 0.00511178 Jy ! Clean residual min=-0.006907 max=0.007284 Jy/beam ! Clean residual mean=0.000144 rms=0.002015 Jy/beam ! Combined flux in latest and established models = 0.180735 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 13 components and 0.180735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.340766Jy sigma=0.001662 ! Fit after self-cal, rms=0.340764Jy sigma=0.001662 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.637 x 9.785 at -2.958 degrees (North through East) ! Clean map min=-0.0067452 max=0.18305 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.340764Jy sigma=0.001662 ! Fit after self-cal, rms=0.340771Jy sigma=0.001662 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.340771Jy sigma=0.001662 ! Fit after self-cal, rms=0.340770Jy sigma=0.001662 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.636 mas, bmaj=9.782 mas, bpa=-2.96 degrees ! Estimated noise=828.843 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000223108 Jy ! Component: 100 - total flux cleaned = 0.000321613 Jy ! Component: 150 - total flux cleaned = 0.00050338 Jy ! Component: 200 - total flux cleaned = 0.000667295 Jy ! Total flux subtracted in 200 components = 0.000667295 Jy ! Clean residual min=-0.007027 max=0.006851 Jy/beam ! Clean residual mean=0.000145 rms=0.001989 Jy/beam ! Combined flux in latest and established models = 0.181402 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 15 components and 0.181402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.340720Jy sigma=0.001661 ! Fit after self-cal, rms=0.340719Jy sigma=0.001661 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.340719Jy sigma=0.001661 ! Fit after self-cal, rms=0.339627Jy sigma=0.001656 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154835 Jy ! Component: 100 - total flux cleaned = 0.00169646 Jy ! Component: 150 - total flux cleaned = 0.00176306 Jy ! Component: 200 - total flux cleaned = 0.00189903 Jy ! Total flux subtracted in 200 components = 0.00189903 Jy ! Clean residual min=-0.006845 max=0.006653 Jy/beam ! Clean residual mean=0.000158 rms=0.001973 Jy/beam ! Combined flux in latest and established models = 0.183301 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 18 components and 0.183301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.339596Jy sigma=0.001656 ! Fit after self-cal, rms=0.339455Jy sigma=0.001655 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.636 x 9.782 at -2.96 degrees (North through East) ! Clean map min=-0.0065232 max=0.18346 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.339455Jy sigma=0.001655 ! Fit after self-cal, rms=0.339729Jy sigma=0.001655 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.339729Jy sigma=0.001655 ! Fit after self-cal, rms=0.339696Jy sigma=0.001655 ! Inverting map and beam ! Estimated beam: bmin=3.624 mas, bmaj=9.76 mas, bpa=-2.557 degrees ! Estimated noise=829.573 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139545 Jy ! Component: 100 - total flux cleaned = 0.00145052 Jy ! Component: 150 - total flux cleaned = 0.00150792 Jy ! Component: 200 - total flux cleaned = 0.00155552 Jy ! Total flux subtracted in 200 components = 0.00155552 Jy ! Clean residual min=-0.006702 max=0.006884 Jy/beam ! Clean residual mean=0.000154 rms=0.001895 Jy/beam ! Combined flux in latest and established models = 0.184857 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 20 components and 0.184857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.339672Jy sigma=0.001655 ! Fit after self-cal, rms=0.339663Jy sigma=0.001655 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.339663Jy sigma=0.001655 ! Fit after self-cal, rms=0.338890Jy sigma=0.001654 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.338890Jy sigma=0.001654 ! Fit after self-cal, rms=0.338890Jy sigma=0.001654 ! Inverting map and beam ! Estimated beam: bmin=3.591 mas, bmaj=9.685 mas, bpa=-2.248 degrees ! Estimated noise=829.131 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160835 Jy ! Component: 100 - total flux cleaned = 0.00171337 Jy ! Component: 150 - total flux cleaned = 0.00181064 Jy ! Component: 200 - total flux cleaned = 0.00185577 Jy ! Total flux subtracted in 200 components = 0.00185577 Jy ! Clean residual min=-0.006478 max=0.006787 Jy/beam ! Clean residual mean=0.000143 rms=0.001843 Jy/beam ! Combined flux in latest and established models = 0.186713 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 26 components and 0.186713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.338868Jy sigma=0.001654 ! Fit after self-cal, rms=0.338875Jy sigma=0.001654 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.621 mas, bmaj=20.45 mas, bpa=3.748 degrees ! Estimated noise=1008.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.002134 Jy ! Component: 100 - total flux cleaned = 0.00226377 Jy ! Component: 150 - total flux cleaned = 0.00237713 Jy ! Component: 200 - total flux cleaned = 0.00248279 Jy ! Total flux subtracted in 200 components = 0.00248279 Jy ! Clean residual min=-0.006987 max=0.006626 Jy/beam ! Clean residual mean=0.000261 rms=0.002317 Jy/beam ! Combined flux in latest and established models = 0.189195 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 28 components and 0.189195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.338869Jy sigma=0.001654 ! Fit after self-cal, rms=0.338877Jy sigma=0.001654 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.549 mas, bmaj=6.968 mas, bpa=-1.98 degrees ! Estimated noise=1754.16 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.160387 Jy ! Component: 100 - total flux cleaned = 0.178997 Jy ! Component: 150 - total flux cleaned = 0.181059 Jy ! Component: 200 - total flux cleaned = 0.181617 Jy ! Total flux subtracted in 200 components = 0.181617 Jy ! Clean residual min=-0.012281 max=0.014298 Jy/beam ! Clean residual mean=0.000018 rms=0.003536 Jy/beam ! Combined flux in latest and established models = 0.181617 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.181617 Jy ! Inverting map and beam ! Estimated beam: bmin=3.591 mas, bmaj=9.685 mas, bpa=-2.248 degrees ! Estimated noise=829.131 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00355361 Jy ! Component: 100 - total flux cleaned = 0.00391756 Jy ! Component: 150 - total flux cleaned = 0.00412589 Jy ! Component: 200 - total flux cleaned = 0.00422038 Jy ! Total flux subtracted in 200 components = 0.00422038 Jy ! Clean residual min=-0.006268 max=0.006686 Jy/beam ! Clean residual mean=0.000143 rms=0.001876 Jy/beam ! Combined flux in latest and established models = 0.185837 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 20 components and 0.185837 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.621 mas, bmaj=20.45 mas, bpa=3.748 degrees ! Estimated noise=1008.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252791 Jy ! Component: 100 - total flux cleaned = 0.00269793 Jy ! Component: 150 - total flux cleaned = 0.00291425 Jy ! Component: 200 - total flux cleaned = 0.00303867 Jy ! Total flux subtracted in 200 components = 0.00303867 Jy ! Clean residual min=-0.007138 max=0.006523 Jy/beam ! Clean residual mean=0.000262 rms=0.002328 Jy/beam ! Combined flux in latest and established models = 0.188876 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 24 components and 0.188876 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.591 mas, bmaj=9.685 mas, bpa=-2.248 degrees ! Estimated noise=829.131 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00230994 Jy ! Component: 100 - total flux cleaned = -0.00230886 Jy ! Component: 150 - total flux cleaned = -0.00230774 Jy ! Component: 200 - total flux cleaned = -0.00224497 Jy ! Total flux subtracted in 200 components = -0.00224497 Jy ! Clean residual min=-0.006347 max=0.006741 Jy/beam ! Clean residual mean=0.000144 rms=0.001843 Jy/beam ! Combined flux in latest and established models = 0.186631 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 33 components and 0.186631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.338892Jy sigma=0.001654 ! Fit after self-cal, rms=0.338892Jy sigma=0.001654 wmodel J0104-2416_S_1997_07_02_yyk\_map.mod ! Writing 33 model components to file: J0104-2416_S_1997_07_02_yyk_map.mod wobs J0104-2416_S_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J0104-2416_S_1997_07_02_yyk_uvs.fits wwins J0104-2416_S_1997_07_02_yyk\_map.win ! wwins: Wrote 1 windows to J0104-2416_S_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000499966 Jy ! Component: 100 - total flux cleaned = 0.000298364 Jy ! Component: 150 - total flux cleaned = 0.000494601 Jy ! Component: 200 - total flux cleaned = 0.000227574 Jy ! Component: 250 - total flux cleaned = 0.00023067 Jy ! Component: 300 - total flux cleaned = -9.74932e-05 Jy ! Component: 350 - total flux cleaned = -0.000332333 Jy ! Component: 400 - total flux cleaned = -0.000633975 Jy ! Component: 450 - total flux cleaned = -0.000926106 Jy ! Component: 500 - total flux cleaned = -0.000997165 Jy ! Component: 550 - total flux cleaned = -0.00106745 Jy ! Component: 600 - total flux cleaned = -0.00106717 Jy ! Component: 650 - total flux cleaned = -0.00106657 Jy ! Component: 700 - total flux cleaned = -0.00100282 Jy ! Component: 750 - total flux cleaned = -0.000940052 Jy ! Component: 800 - total flux cleaned = -0.000694779 Jy ! Component: 850 - total flux cleaned = -0.000513967 Jy ! Component: 900 - total flux cleaned = -0.000395487 Jy ! Component: 950 - total flux cleaned = -0.000220671 Jy ! Component: 1000 - total flux cleaned = -0.000106953 Jy ! Component: 1050 - total flux cleaned = -0.000162807 Jy ! Component: 1100 - total flux cleaned = 0.000171871 Jy ! Component: 1150 - total flux cleaned = 0.000172518 Jy ! Component: 1200 - total flux cleaned = 0.00022669 Jy ! Component: 1250 - total flux cleaned = 0.000119656 Jy ! Component: 1300 - total flux cleaned = 0.000225124 Jy ! Component: 1350 - total flux cleaned = 0.000276438 Jy ! Component: 1400 - total flux cleaned = 0.000173844 Jy ! Component: 1450 - total flux cleaned = 0.000173988 Jy ! Component: 1500 - total flux cleaned = 7.44465e-05 Jy ! Component: 1550 - total flux cleaned = 0.00012396 Jy ! Component: 1600 - total flux cleaned = 0.000124193 Jy ! Component: 1650 - total flux cleaned = 0.000221098 Jy ! Component: 1700 - total flux cleaned = 0.000269093 Jy ! Component: 1750 - total flux cleaned = 0.000410842 Jy ! Component: 1800 - total flux cleaned = 0.000363939 Jy ! Component: 1850 - total flux cleaned = 0.000503387 Jy ! Component: 1900 - total flux cleaned = 0.000411571 Jy ! Component: 1950 - total flux cleaned = 0.000638969 Jy ! Component: 2000 - total flux cleaned = 0.000548546 Jy ! Total flux subtracted in 2048 components = 0.000503717 Jy ! Clean residual min=-0.003117 max=0.003510 Jy/beam ! Clean residual mean=0.000048 rms=0.000968 Jy/beam ! Combined flux in latest and established models = 0.187134 Jy keep ! Adding 153 model components to the UV plane model. ! The established model now contains 186 components and 0.187134 Jy ![Exited script file: muppet] wmap "J0104-2416_S_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.591 x 9.685 at -2.248 degrees (North through East) ! Clean map min=-0.0046663 max=0.18155 Jy/beam ! Writing clean map to FITS file: J0104-2416_S_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.181547 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00096732 device "J0104-2416_S_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J0104-2416_S_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.59847 1.59847 3.19693 6.39386 12.7877 25.5754 51.1509 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.181 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.591 x 9.685 at -2.248 degrees (North through East) ! Clean map min=-0.0046663 max=0.18155 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0104-2416_S_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J0104-2416_S_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0104-2416_S_1997_07_02_yyk_uvs.log closed on Sun Jan 7 15:33:10 2007