! Started logfile: J0050-0929_X_1996_05_15_yyk_uvs.log on Mon Jan 8 01:53:54 2007 obs J0050-0929_X_1996_05_15_yyk_uva.fits ! Reading UV FITS file: J0050-0929_X_1996_05_15_yyk_uva.fits ! AN table 1: 107 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.658982 visibilities/baseline/integration-bin. ! Found source: J0050-0929 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15049e+09 8e+06 1 8e+06 ! 02 2 8.23424e+09 8e+06 1 8e+06 ! 03 3 8.41424e+09 8e+06 1 8e+06 ! 04 4 8.55424e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 617 lines of history. ! ! Reading 12692 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0050-0929_X_1996_05_15_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.46827 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6604 mas, bmaj=1.797 mas, bpa=-0.4957 degrees ! Estimated noise=1260.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.23237 Jy ! Component: 100 - total flux cleaned = 1.39871 Jy ! Total flux subtracted in 100 components = 1.39871 Jy ! Clean residual min=-0.031793 max=0.040765 Jy/beam ! Clean residual mean=-0.000045 rms=0.008663 Jy/beam ! Combined flux in latest and established models = 1.39871 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 1.39871 Jy ! ! Correcting IF 1. ! A total of 203 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 203 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 203 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.376257Jy sigma=0.002166 ! Fit after self-cal, rms=0.373904Jy sigma=0.002149 ! Inverting map and beam ! Estimated beam: bmin=0.6604 mas, bmaj=1.797 mas, bpa=-0.4857 degrees ! Estimated noise=1260.22 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.794 mas, bmaj=2.092 mas, bpa=-1.571 degrees ! Estimated noise=920.849 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.047067 Jy ! Component: 100 - total flux cleaned = 0.0603026 Jy ! Component: 150 - total flux cleaned = 0.0645868 Jy ! Component: 200 - total flux cleaned = 0.0648671 Jy ! Total flux subtracted in 200 components = 0.0648671 Jy ! Clean residual min=-0.021002 max=0.027240 Jy/beam ! Clean residual mean=-0.000036 rms=0.005769 Jy/beam ! Combined flux in latest and established models = 1.46358 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 22 components and 1.46358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.371708Jy sigma=0.002120 ! Fit after self-cal, rms=0.371149Jy sigma=0.002116 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.794 x 2.092 at -1.571 degrees (North through East) ! Clean map min=-0.019097 max=1.4258 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.995219 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.96 HN 1.04 KP 0.99 ! LA 1.05 MK 0.98 NL 1.05 OV 1.00* ! PT 1.01 SC 0.96 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00426 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 1.03 KP 1.00 ! LA 1.01 MK 0.98 NL 1.01 OV 1.00* ! PT 0.97 SC 1.00 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.997624 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 1.05 KP 0.98 ! LA 1.02 MK 1.01 NL 1.03 OV 1.00* ! PT 0.96 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.992512 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.06 KP 0.98 ! LA 1.02 MK 0.99 NL 1.05 OV 1.00* ! PT 0.99 SC 1.02 ! ! ! Fit before self-cal, rms=0.371149Jy sigma=0.002116 ! Fit after self-cal, rms=0.373293Jy sigma=0.002085 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.373293Jy sigma=0.002085 ! Fit after self-cal, rms=0.372970Jy sigma=0.002083 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7936 mas, bmaj=2.096 mas, bpa=-1.531 degrees ! Estimated noise=915.794 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.2, -5.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00818855 Jy ! Component: 100 - total flux cleaned = 0.0069645 Jy ! Component: 150 - total flux cleaned = 0.00512671 Jy ! Component: 200 - total flux cleaned = 0.0036432 Jy ! Total flux subtracted in 200 components = 0.0036432 Jy ! Clean residual min=-0.009570 max=0.010959 Jy/beam ! Clean residual mean=0.000017 rms=0.002591 Jy/beam ! Combined flux in latest and established models = 1.46722 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 49 components and 1.46722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372113Jy sigma=0.002077 ! Fit after self-cal, rms=0.371863Jy sigma=0.002075 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.371863Jy sigma=0.002075 ! Fit after self-cal, rms=0.279333Jy sigma=0.001474 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00304251 Jy ! Component: 100 - total flux cleaned = 0.00249432 Jy ! Component: 150 - total flux cleaned = 0.00224404 Jy ! Component: 200 - total flux cleaned = 0.00160441 Jy ! Total flux subtracted in 200 components = 0.00160441 Jy ! Clean residual min=-0.007827 max=0.007183 Jy/beam ! Clean residual mean=0.000018 rms=0.001843 Jy/beam ! Combined flux in latest and established models = 1.46882 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 65 components and 1.46882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278280Jy sigma=0.001467 ! Fit after self-cal, rms=0.274781Jy sigma=0.001435 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7936 x 2.096 at -1.531 degrees (North through East) ! Clean map min=-0.0072832 max=1.4376 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274781Jy sigma=0.001435 ! Fit after self-cal, rms=0.271739Jy sigma=0.001428 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.271739Jy sigma=0.001428 ! Fit after self-cal, rms=0.271592Jy sigma=0.001425 ! Inverting map and beam ! Estimated beam: bmin=0.7917 mas, bmaj=2.088 mas, bpa=-1.398 degrees ! Estimated noise=913.635 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00220807 Jy ! Component: 100 - total flux cleaned = -0.0015363 Jy ! Component: 150 - total flux cleaned = -0.00100253 Jy ! Component: 200 - total flux cleaned = -0.000738441 Jy ! Total flux subtracted in 200 components = -0.000738441 Jy ! Clean residual min=-0.004227 max=0.004487 Jy/beam ! Clean residual mean=-0.000006 rms=0.001236 Jy/beam ! Combined flux in latest and established models = 1.46809 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 1.46809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.271444Jy sigma=0.001424 ! Fit after self-cal, rms=0.271390Jy sigma=0.001423 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.271390Jy sigma=0.001423 ! Fit after self-cal, rms=0.272470Jy sigma=0.001420 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272470Jy sigma=0.001420 ! Fit after self-cal, rms=0.272384Jy sigma=0.001419 ! Inverting map and beam ! Estimated beam: bmin=0.7916 mas, bmaj=2.088 mas, bpa=-1.396 degrees ! Estimated noise=913.545 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000561992 Jy ! Component: 100 - total flux cleaned = -0.000414928 Jy ! Component: 150 - total flux cleaned = -0.000413788 Jy ! Component: 200 - total flux cleaned = -0.000416723 Jy ! Total flux subtracted in 200 components = -0.000416723 Jy ! Clean residual min=-0.004073 max=0.004516 Jy/beam ! Clean residual mean=-0.000005 rms=0.001199 Jy/beam ! Combined flux in latest and established models = 1.46767 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 88 components and 1.46767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272335Jy sigma=0.001419 ! Fit after self-cal, rms=0.272215Jy sigma=0.001418 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.249 mas, bmaj=4.016 mas, bpa=7.006 degrees ! Estimated noise=1240.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000906111 Jy ! Component: 100 - total flux cleaned = 0.00114419 Jy ! Component: 150 - total flux cleaned = 0.00133435 Jy ! Component: 200 - total flux cleaned = 0.00149031 Jy ! Total flux subtracted in 200 components = 0.00149031 Jy ! Clean residual min=-0.005241 max=0.006481 Jy/beam ! Clean residual mean=-0.000008 rms=0.001950 Jy/beam ! Combined flux in latest and established models = 1.46916 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 94 components and 1.46916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272186Jy sigma=0.001418 ! Fit after self-cal, rms=0.272063Jy sigma=0.001417 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6592 mas, bmaj=1.797 mas, bpa=-0.3956 degrees ! Estimated noise=1249.76 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.24131 Jy ! Component: 100 - total flux cleaned = 1.40841 Jy ! Component: 150 - total flux cleaned = 1.44643 Jy ! Component: 200 - total flux cleaned = 1.45874 Jy ! Total flux subtracted in 200 components = 1.45874 Jy ! Clean residual min=-0.007451 max=0.006536 Jy/beam ! Clean residual mean=-0.000008 rms=0.001876 Jy/beam ! Combined flux in latest and established models = 1.45874 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 1.45874 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7916 mas, bmaj=2.088 mas, bpa=-1.396 degrees ! Estimated noise=913.545 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00599189 Jy ! Component: 100 - total flux cleaned = 0.00804945 Jy ! Component: 150 - total flux cleaned = 0.00913723 Jy ! Component: 200 - total flux cleaned = 0.00944554 Jy ! Total flux subtracted in 200 components = 0.00944554 Jy ! Clean residual min=-0.004742 max=0.004845 Jy/beam ! Clean residual mean=-0.000006 rms=0.001372 Jy/beam ! Combined flux in latest and established models = 1.46819 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 32 components and 1.46819 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.249 mas, bmaj=4.016 mas, bpa=7.006 degrees ! Estimated noise=1240.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000368299 Jy ! Component: 100 - total flux cleaned = 0.00075146 Jy ! Component: 150 - total flux cleaned = 0.000967985 Jy ! Component: 200 - total flux cleaned = 0.00108144 Jy ! Total flux subtracted in 200 components = 0.00108144 Jy ! Clean residual min=-0.005392 max=0.006618 Jy/beam ! Clean residual mean=-0.000008 rms=0.001964 Jy/beam ! Combined flux in latest and established models = 1.46927 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 46 components and 1.46927 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7916 mas, bmaj=2.088 mas, bpa=-1.396 degrees ! Estimated noise=913.545 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -7.32603e-05 Jy ! Component: 100 - total flux cleaned = 3.29467e-05 Jy ! Component: 150 - total flux cleaned = -0.000252685 Jy ! Component: 200 - total flux cleaned = -0.00050647 Jy ! Total flux subtracted in 200 components = -0.00050647 Jy ! Clean residual min=-0.004223 max=0.004729 Jy/beam ! Clean residual mean=-0.000004 rms=0.001234 Jy/beam ! Combined flux in latest and established models = 1.46876 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 55 components and 1.46876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272125Jy sigma=0.001418 ! Fit after self-cal, rms=0.271984Jy sigma=0.001417 wmodel J0050-0929_X_1996_05_15_yyk\_map.mod ! Writing 55 model components to file: J0050-0929_X_1996_05_15_yyk_map.mod wobs J0050-0929_X_1996_05_15_yyk\_uvs.fits ! Writing UV FITS file: J0050-0929_X_1996_05_15_yyk_uvs.fits wwins J0050-0929_X_1996_05_15_yyk\_map.win ! wwins: Wrote 2 windows to J0050-0929_X_1996_05_15_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121401 Jy ! Component: 100 - total flux cleaned = 0.00179835 Jy ! Component: 150 - total flux cleaned = 0.00213182 Jy ! Component: 200 - total flux cleaned = 0.00225886 Jy ! Component: 250 - total flux cleaned = 0.00248946 Jy ! Component: 300 - total flux cleaned = 0.00287101 Jy ! Component: 350 - total flux cleaned = 0.00323683 Jy ! Component: 400 - total flux cleaned = 0.00348622 Jy ! Component: 450 - total flux cleaned = 0.00372541 Jy ! Component: 500 - total flux cleaned = 0.00395445 Jy ! Component: 550 - total flux cleaned = 0.00435192 Jy ! Component: 600 - total flux cleaned = 0.00482071 Jy ! Component: 650 - total flux cleaned = 0.00498521 Jy ! Component: 700 - total flux cleaned = 0.00530687 Jy ! Component: 750 - total flux cleaned = 0.00550226 Jy ! Component: 800 - total flux cleaned = 0.00565461 Jy ! Component: 850 - total flux cleaned = 0.00587802 Jy ! Component: 900 - total flux cleaned = 0.00609445 Jy ! Component: 950 - total flux cleaned = 0.00616401 Jy ! Component: 1000 - total flux cleaned = 0.00623228 Jy ! Component: 1050 - total flux cleaned = 0.00629972 Jy ! Component: 1100 - total flux cleaned = 0.00629977 Jy ! Component: 1150 - total flux cleaned = 0.00636509 Jy ! Component: 1200 - total flux cleaned = 0.0063974 Jy ! Component: 1250 - total flux cleaned = 0.00655183 Jy ! Component: 1300 - total flux cleaned = 0.00661217 Jy ! Component: 1350 - total flux cleaned = 0.00664125 Jy ! Component: 1400 - total flux cleaned = 0.00667029 Jy ! Component: 1450 - total flux cleaned = 0.00672738 Jy ! Component: 1500 - total flux cleaned = 0.00672747 Jy ! Component: 1550 - total flux cleaned = 0.00672761 Jy ! Component: 1600 - total flux cleaned = 0.006782 Jy ! Component: 1650 - total flux cleaned = 0.00675545 Jy ! Component: 1700 - total flux cleaned = 0.0068084 Jy ! Component: 1750 - total flux cleaned = 0.00688634 Jy ! Component: 1800 - total flux cleaned = 0.00691187 Jy ! Component: 1850 - total flux cleaned = 0.00701306 Jy ! Component: 1900 - total flux cleaned = 0.00703838 Jy ! Component: 1950 - total flux cleaned = 0.007137 Jy ! Component: 2000 - total flux cleaned = 0.00711254 Jy ! Total flux subtracted in 2048 components = 0.0072333 Jy ! Clean residual min=-0.001552 max=0.001636 Jy/beam ! Clean residual mean=-0.000003 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 1.476 Jy keep ! Adding 130 model components to the UV plane model. ! The established model now contains 185 components and 1.476 Jy ![Exited script file: muppet] wmap "J0050-0929_X_1996_05_15_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7916 x 2.088 at -1.396 degrees (North through East) ! Clean map min=-0.0056824 max=1.4344 Jy/beam ! Writing clean map to FITS file: J0050-0929_X_1996_05_15_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.43437 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000417653 device "J0050-0929_X_1996_05_15_yyk\_map.eps/VPS" ! Attempting to open device: 'J0050-0929_X_1996_05_15_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0873524 0.0873524 0.174705 0.349409 0.698819 1.39764 2.79528 5.59055 11.1811 22.3622 44.7244 89.4488 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.434 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7916 x 2.088 at -1.396 degrees (North through East) ! Clean map min=-0.0056824 max=1.4344 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0050-0929_X_1996_05_15_yyk\_map.gif/gif" ! Attempting to open device: 'J0050-0929_X_1996_05_15_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0050-0929_X_1996_05_15_yyk_uvs.log closed on Mon Jan 8 01:54:01 2007