! Started logfile: J0050-0929_X_1995_07_15_yyk_uvs.log on Mon Jan 8 01:53:28 2007 obs J0050-0929_X_1995_07_15_yyk_uva.fits ! Reading UV FITS file: J0050-0929_X_1995_07_15_yyk_uva.fits ! AN table 1: 39 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.356125 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0050-0929 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15049e+09 4e+06 1 4e+06 ! 02 2 8.23236e+09 4e+06 1 4e+06 ! 03 3 8.41236e+09 4e+06 1 4e+06 ! 04 4 8.55236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 2500 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0050-0929_X_1995_07_15_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.898976 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.613 mas, bmaj=2.572 mas, bpa=-20.04 degrees ! Estimated noise=3889.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.693089 Jy ! Component: 100 - total flux cleaned = 0.786347 Jy ! Total flux subtracted in 100 components = 0.786347 Jy ! Clean residual min=-0.034116 max=0.042410 Jy/beam ! Clean residual mean=-0.000148 rms=0.010724 Jy/beam ! Combined flux in latest and established models = 0.786347 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.786347 Jy ! ! Correcting IF 1. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.402053Jy sigma=0.002054 ! Fit after self-cal, rms=0.401784Jy sigma=0.002053 ! Inverting map and beam ! Estimated beam: bmin=1.613 mas, bmaj=2.572 mas, bpa=-20.03 degrees ! Estimated noise=3890.44 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.65 mas, bmaj=3.659 mas, bpa=-24.74 degrees ! Estimated noise=2750.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0261574 Jy ! Component: 100 - total flux cleaned = 0.0345479 Jy ! Component: 150 - total flux cleaned = 0.0356839 Jy ! Component: 200 - total flux cleaned = 0.0363941 Jy ! Total flux subtracted in 200 components = 0.0363941 Jy ! Clean residual min=-0.027520 max=0.032233 Jy/beam ! Clean residual mean=0.000002 rms=0.009124 Jy/beam ! Combined flux in latest and established models = 0.822741 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.822741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.400370Jy sigma=0.002046 ! Fit after self-cal, rms=0.400340Jy sigma=0.002046 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.65 x 3.659 at -24.74 degrees (North through East) ! Clean map min=-0.027408 max=0.79981 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00641 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.92 KP 1.12 ! LA 0.96 MK 1.00* NL 1.03 OV 1.00* ! PT 0.97 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00413 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.95 KP 1.13 ! LA 0.94 MK 1.00* NL 1.02 OV 1.00* ! PT 0.98 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00091 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.01 KP 1.03 ! LA 0.91 MK 1.00* NL 1.05 OV 1.00* ! PT 0.95 SC 1.03 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.99147 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.97 KP 1.14 ! LA 0.94 MK 1.00* NL 1.04 OV 1.00* ! PT 1.02 SC 0.99 ! ! ! Fit before self-cal, rms=0.400340Jy sigma=0.002046 ! Fit after self-cal, rms=0.402213Jy sigma=0.002023 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.402213Jy sigma=0.002023 ! Fit after self-cal, rms=0.402220Jy sigma=0.002023 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.637 mas, bmaj=3.634 mas, bpa=-24.42 degrees ! Estimated noise=2733.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00537515 Jy ! Component: 100 - total flux cleaned = 0.00555429 Jy ! Component: 150 - total flux cleaned = 0.00526362 Jy ! Component: 200 - total flux cleaned = 0.00500733 Jy ! Total flux subtracted in 200 components = 0.00500733 Jy ! Clean residual min=-0.014248 max=0.015158 Jy/beam ! Clean residual mean=0.000063 rms=0.004645 Jy/beam ! Combined flux in latest and established models = 0.827748 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 27 components and 0.827748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.402053Jy sigma=0.002022 ! Fit after self-cal, rms=0.402035Jy sigma=0.002022 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.402035Jy sigma=0.002022 ! Fit after self-cal, rms=0.382815Jy sigma=0.001922 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143591 Jy ! Component: 100 - total flux cleaned = 0.00082139 Jy ! Component: 150 - total flux cleaned = 0.00101915 Jy ! Component: 200 - total flux cleaned = 0.00129645 Jy ! Total flux subtracted in 200 components = 0.00129645 Jy ! Clean residual min=-0.013037 max=0.015057 Jy/beam ! Clean residual mean=0.000072 rms=0.004631 Jy/beam ! Combined flux in latest and established models = 0.829045 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 38 components and 0.829045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.382488Jy sigma=0.001920 ! Fit after self-cal, rms=0.377184Jy sigma=0.001892 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.637 x 3.634 at -24.42 degrees (North through East) ! Clean map min=-0.013266 max=0.8098 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.377184Jy sigma=0.001892 ! Fit after self-cal, rms=0.374829Jy sigma=0.001891 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.374829Jy sigma=0.001891 ! Fit after self-cal, rms=0.373450Jy sigma=0.001883 ! Inverting map and beam ! Estimated beam: bmin=1.636 mas, bmaj=3.626 mas, bpa=-24.53 degrees ! Estimated noise=2721.56 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00412074 Jy ! Component: 100 - total flux cleaned = 0.00455267 Jy ! Component: 150 - total flux cleaned = 0.00473928 Jy ! Component: 200 - total flux cleaned = 0.00482531 Jy ! Total flux subtracted in 200 components = 0.00482531 Jy ! Clean residual min=-0.013162 max=0.013423 Jy/beam ! Clean residual mean=0.000076 rms=0.004417 Jy/beam ! Combined flux in latest and established models = 0.83387 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.83387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.373368Jy sigma=0.001882 ! Fit after self-cal, rms=0.373000Jy sigma=0.001880 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.373000Jy sigma=0.001880 ! Fit after self-cal, rms=0.372624Jy sigma=0.001878 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372624Jy sigma=0.001878 ! Fit after self-cal, rms=0.372556Jy sigma=0.001878 ! Inverting map and beam ! Estimated beam: bmin=1.632 mas, bmaj=3.621 mas, bpa=-24.6 degrees ! Estimated noise=2721.28 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0038662 Jy ! Component: 100 - total flux cleaned = 0.00440365 Jy ! Component: 150 - total flux cleaned = 0.00454659 Jy ! Component: 200 - total flux cleaned = 0.00462016 Jy ! Total flux subtracted in 200 components = 0.00462016 Jy ! Clean residual min=-0.013709 max=0.013641 Jy/beam ! Clean residual mean=0.000077 rms=0.004337 Jy/beam ! Combined flux in latest and established models = 0.83849 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.83849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372501Jy sigma=0.001877 ! Fit after self-cal, rms=0.372487Jy sigma=0.001877 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.11 mas, bmaj=4.466 mas, bpa=-26.76 degrees ! Estimated noise=2980.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00118374 Jy ! Component: 100 - total flux cleaned = -0.00144945 Jy ! Component: 150 - total flux cleaned = -0.00144373 Jy ! Component: 200 - total flux cleaned = -0.00139439 Jy ! Total flux subtracted in 200 components = -0.00139439 Jy ! Clean residual min=-0.013785 max=0.014667 Jy/beam ! Clean residual mean=0.000110 rms=0.005389 Jy/beam ! Combined flux in latest and established models = 0.837096 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.837096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372465Jy sigma=0.001877 ! Fit after self-cal, rms=0.372463Jy sigma=0.001877 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.612 mas, bmaj=2.553 mas, bpa=-19.91 degrees ! Estimated noise=3833.3 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.694205 Jy ! Component: 100 - total flux cleaned = 0.785004 Jy ! Component: 150 - total flux cleaned = 0.804447 Jy ! Component: 200 - total flux cleaned = 0.815208 Jy ! Total flux subtracted in 200 components = 0.815208 Jy ! Clean residual min=-0.020015 max=0.017620 Jy/beam ! Clean residual mean=0.000010 rms=0.005363 Jy/beam ! Combined flux in latest and established models = 0.815208 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.815208 Jy ! Inverting map and beam ! Estimated beam: bmin=1.632 mas, bmaj=3.621 mas, bpa=-24.6 degrees ! Estimated noise=2721.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163925 Jy ! Component: 100 - total flux cleaned = 0.0204411 Jy ! Component: 150 - total flux cleaned = 0.0217846 Jy ! Component: 200 - total flux cleaned = 0.0220613 Jy ! Total flux subtracted in 200 components = 0.0220613 Jy ! Clean residual min=-0.012446 max=0.014248 Jy/beam ! Clean residual mean=0.000073 rms=0.004375 Jy/beam ! Combined flux in latest and established models = 0.837269 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 29 components and 0.837269 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.11 mas, bmaj=4.466 mas, bpa=-26.76 degrees ! Estimated noise=2980.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000482506 Jy ! Component: 100 - total flux cleaned = -0.000485063 Jy ! Component: 150 - total flux cleaned = -0.000427359 Jy ! Component: 200 - total flux cleaned = -0.00043203 Jy ! Total flux subtracted in 200 components = -0.00043203 Jy ! Clean residual min=-0.013747 max=0.014468 Jy/beam ! Clean residual mean=0.000109 rms=0.005423 Jy/beam ! Combined flux in latest and established models = 0.836837 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.836837 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.632 mas, bmaj=3.621 mas, bpa=-24.6 degrees ! Estimated noise=2721.28 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000217259 Jy ! Component: 100 - total flux cleaned = 0.000344495 Jy ! Component: 150 - total flux cleaned = 0.00051972 Jy ! Component: 200 - total flux cleaned = 0.000737297 Jy ! Total flux subtracted in 200 components = 0.000737297 Jy ! Clean residual min=-0.012362 max=0.014177 Jy/beam ! Clean residual mean=0.000073 rms=0.004320 Jy/beam ! Combined flux in latest and established models = 0.837575 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 42 components and 0.837575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372466Jy sigma=0.001877 ! Fit after self-cal, rms=0.372475Jy sigma=0.001877 wmodel J0050-0929_X_1995_07_15_yyk\_map.mod ! Writing 42 model components to file: J0050-0929_X_1995_07_15_yyk_map.mod wobs J0050-0929_X_1995_07_15_yyk\_uvs.fits ! Writing UV FITS file: J0050-0929_X_1995_07_15_yyk_uvs.fits wwins J0050-0929_X_1995_07_15_yyk\_map.win ! wwins: Wrote 1 windows to J0050-0929_X_1995_07_15_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0059955 Jy ! Component: 100 - total flux cleaned = 0.00862571 Jy ! Component: 150 - total flux cleaned = 0.0100182 Jy ! Component: 200 - total flux cleaned = 0.01057 Jy ! Component: 250 - total flux cleaned = 0.0110664 Jy ! Component: 300 - total flux cleaned = 0.0110617 Jy ! Component: 350 - total flux cleaned = 0.0110644 Jy ! Component: 400 - total flux cleaned = 0.0113293 Jy ! Component: 450 - total flux cleaned = 0.0109583 Jy ! Component: 500 - total flux cleaned = 0.0109638 Jy ! Component: 550 - total flux cleaned = 0.011294 Jy ! Component: 600 - total flux cleaned = 0.0114001 Jy ! Component: 650 - total flux cleaned = 0.0112 Jy ! Component: 700 - total flux cleaned = 0.0110081 Jy ! Component: 750 - total flux cleaned = 0.0109126 Jy ! Component: 800 - total flux cleaned = 0.010641 Jy ! Component: 850 - total flux cleaned = 0.0104681 Jy ! Component: 900 - total flux cleaned = 0.010132 Jy ! Component: 950 - total flux cleaned = 0.00980062 Jy ! Component: 1000 - total flux cleaned = 0.00955785 Jy ! Component: 1050 - total flux cleaned = 0.00939953 Jy ! Component: 1100 - total flux cleaned = 0.00916411 Jy ! Component: 1150 - total flux cleaned = 0.00885451 Jy ! Component: 1200 - total flux cleaned = 0.0087033 Jy ! Component: 1250 - total flux cleaned = 0.00855243 Jy ! Component: 1300 - total flux cleaned = 0.00840352 Jy ! Component: 1350 - total flux cleaned = 0.00854906 Jy ! Component: 1400 - total flux cleaned = 0.00862181 Jy ! Component: 1450 - total flux cleaned = 0.0087663 Jy ! Component: 1500 - total flux cleaned = 0.00876581 Jy ! Component: 1550 - total flux cleaned = 0.00876632 Jy ! Component: 1600 - total flux cleaned = 0.00869125 Jy ! Component: 1650 - total flux cleaned = 0.00861466 Jy ! Component: 1700 - total flux cleaned = 0.00853675 Jy ! Component: 1750 - total flux cleaned = 0.00845544 Jy ! Component: 1800 - total flux cleaned = 0.00828921 Jy ! Component: 1850 - total flux cleaned = 0.00820212 Jy ! Component: 1900 - total flux cleaned = 0.00820206 Jy ! Component: 1950 - total flux cleaned = 0.00811332 Jy ! Component: 2000 - total flux cleaned = 0.00811355 Jy ! Total flux subtracted in 2048 components = 0.00802069 Jy ! Clean residual min=-0.005602 max=0.004800 Jy/beam ! Clean residual mean=0.000003 rms=0.001656 Jy/beam ! Combined flux in latest and established models = 0.845595 Jy keep ! Adding 112 model components to the UV plane model. ! The established model now contains 154 components and 0.845595 Jy ![Exited script file: muppet] wmap "J0050-0929_X_1995_07_15_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.632 x 3.621 at -24.6 degrees (North through East) ! Clean map min=-0.010714 max=0.807 Jy/beam ! Writing clean map to FITS file: J0050-0929_X_1995_07_15_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.807004 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00155469 device "J0050-0929_X_1995_07_15_yyk\_map.eps/VPS" ! Attempting to open device: 'J0050-0929_X_1995_07_15_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.577947 0.577947 1.15589 2.31179 4.62358 9.24715 18.4943 36.9886 73.9772 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0046 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.807 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.632 x 3.621 at -24.6 degrees (North through East) ! Clean map min=-0.010714 max=0.807 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0050-0929_X_1995_07_15_yyk\_map.gif/gif" ! Attempting to open device: 'J0050-0929_X_1995_07_15_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0050-0929_X_1995_07_15_yyk_uvs.log closed on Mon Jan 8 01:53:35 2007