! Started logfile: J0050-0452_X_1997_05_07_yyk_uvs.log on Mon Jan 8 01:53:01 2007 obs J0050-0452_X_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J0050-0452_X_1997_05_07_yyk_uva.fits ! AN table 1: 148 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.695045 visibilities/baseline/integration-bin. ! Found source: J0050-0452 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 613 lines of history. ! ! Reading 18516 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0050-0452_X_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.226968 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7575 mas, bmaj=1.927 mas, bpa=-4.042 degrees ! Estimated noise=1290.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0894557 Jy ! Component: 100 - total flux cleaned = 0.106399 Jy ! Total flux subtracted in 100 components = 0.106399 Jy ! Clean residual min=-0.007988 max=0.008394 Jy/beam ! Clean residual mean=0.000051 rms=0.002345 Jy/beam ! Combined flux in latest and established models = 0.106399 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.106399 Jy ! ! Correcting IF 1. ! A total of 266 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 266 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 266 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 266 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.200831Jy sigma=0.001230 ! Fit after self-cal, rms=0.200700Jy sigma=0.001229 ! Inverting map and beam ! Estimated beam: bmin=0.7575 mas, bmaj=1.927 mas, bpa=-4.042 degrees ! Estimated noise=1290.78 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9275 mas, bmaj=2.306 mas, bpa=-5.148 degrees ! Estimated noise=799.505 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108237 Jy ! Component: 100 - total flux cleaned = 0.0155213 Jy ! Component: 150 - total flux cleaned = 0.0178993 Jy ! Component: 200 - total flux cleaned = 0.0191231 Jy ! Total flux subtracted in 200 components = 0.0191231 Jy ! Clean residual min=-0.005784 max=0.005173 Jy/beam ! Clean residual mean=0.000036 rms=0.001391 Jy/beam ! Combined flux in latest and established models = 0.125523 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 42 components and 0.125523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200490Jy sigma=0.001226 ! Fit after self-cal, rms=0.200488Jy sigma=0.001226 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9275 x 2.306 at -5.148 degrees (North through East) ! Clean map min=-0.0055136 max=0.10469 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01157 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 1.03 KP 0.97 ! LA 1.02 MK 0.94 NL 1.11 OV 0.99 ! PT 0.92 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.03281 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 0.97 KP 0.97 ! LA 0.99 MK 0.91 NL 1.06 OV 0.96 ! PT 0.85 SC 1.04 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.200488Jy sigma=0.001226 ! Fit after self-cal, rms=0.202014Jy sigma=0.001225 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202014Jy sigma=0.001225 ! Fit after self-cal, rms=0.202014Jy sigma=0.001225 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9199 mas, bmaj=2.317 mas, bpa=-5.637 degrees ! Estimated noise=790.198 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000262635 Jy ! Component: 100 - total flux cleaned = -0.000139121 Jy ! Component: 150 - total flux cleaned = -6.20011e-05 Jy ! Component: 200 - total flux cleaned = 3.62049e-06 Jy ! Total flux subtracted in 200 components = 3.62049e-06 Jy ! Clean residual min=-0.005059 max=0.004931 Jy/beam ! Clean residual mean=0.000007 rms=0.001236 Jy/beam ! Combined flux in latest and established models = 0.125526 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.125526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202003Jy sigma=0.001225 ! Fit after self-cal, rms=0.202002Jy sigma=0.001225 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202002Jy sigma=0.001225 ! Fit after self-cal, rms=0.199157Jy sigma=0.001208 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331958 Jy ! Component: 100 - total flux cleaned = 0.00296834 Jy ! Component: 150 - total flux cleaned = 0.00280807 Jy ! Component: 200 - total flux cleaned = 0.00276116 Jy ! Total flux subtracted in 200 components = 0.00276116 Jy ! Clean residual min=-0.004117 max=0.004400 Jy/beam ! Clean residual mean=-0.000006 rms=0.001093 Jy/beam ! Combined flux in latest and established models = 0.128287 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 55 components and 0.128287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199106Jy sigma=0.001207 ! Fit after self-cal, rms=0.198875Jy sigma=0.001205 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9199 x 2.317 at -5.637 degrees (North through East) ! Clean map min=-0.0038624 max=0.10869 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198875Jy sigma=0.001205 ! Fit after self-cal, rms=0.192821Jy sigma=0.001204 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192821Jy sigma=0.001204 ! Fit after self-cal, rms=0.192788Jy sigma=0.001204 ! Inverting map and beam ! Estimated beam: bmin=0.9236 mas, bmaj=2.281 mas, bpa=-4.685 degrees ! Estimated noise=763.489 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00272605 Jy ! Component: 100 - total flux cleaned = -0.00333731 Jy ! Component: 150 - total flux cleaned = -0.0034429 Jy ! Component: 200 - total flux cleaned = -0.00344254 Jy ! Total flux subtracted in 200 components = -0.00344254 Jy ! Clean residual min=-0.003657 max=0.003855 Jy/beam ! Clean residual mean=0.000003 rms=0.000976 Jy/beam ! Combined flux in latest and established models = 0.124845 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 60 components and 0.124845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192734Jy sigma=0.001204 ! Fit after self-cal, rms=0.192746Jy sigma=0.001204 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192746Jy sigma=0.001204 ! Fit after self-cal, rms=0.191260Jy sigma=0.001203 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191260Jy sigma=0.001203 ! Fit after self-cal, rms=0.191274Jy sigma=0.001203 ! Inverting map and beam ! Estimated beam: bmin=0.9343 mas, bmaj=2.296 mas, bpa=-4.704 degrees ! Estimated noise=749.389 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00234326 Jy ! Component: 100 - total flux cleaned = -0.00298769 Jy ! Component: 150 - total flux cleaned = -0.00304452 Jy ! Component: 200 - total flux cleaned = -0.00306974 Jy ! Total flux subtracted in 200 components = -0.00306974 Jy ! Clean residual min=-0.003497 max=0.003848 Jy/beam ! Clean residual mean=0.000012 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.121775 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 0.121775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191234Jy sigma=0.001203 ! Fit after self-cal, rms=0.191248Jy sigma=0.001203 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.282 mas, bmaj=3.984 mas, bpa=8.936 degrees ! Estimated noise=948.884 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000272387 Jy ! Component: 100 - total flux cleaned = 0.000214755 Jy ! Component: 150 - total flux cleaned = 0.000213235 Jy ! Component: 200 - total flux cleaned = 0.000231184 Jy ! Total flux subtracted in 200 components = 0.000231184 Jy ! Clean residual min=-0.003670 max=0.004253 Jy/beam ! Clean residual mean=0.000020 rms=0.001175 Jy/beam ! Combined flux in latest and established models = 0.122006 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 62 components and 0.122006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191250Jy sigma=0.001203 ! Fit after self-cal, rms=0.191257Jy sigma=0.001203 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7601 mas, bmaj=1.922 mas, bpa=-3.761 degrees ! Estimated noise=1220.42 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0898998 Jy ! Component: 100 - total flux cleaned = 0.105668 Jy ! Component: 150 - total flux cleaned = 0.113145 Jy ! Component: 200 - total flux cleaned = 0.117563 Jy ! Total flux subtracted in 200 components = 0.117563 Jy ! Clean residual min=-0.006522 max=0.006725 Jy/beam ! Clean residual mean=0.000012 rms=0.001789 Jy/beam ! Combined flux in latest and established models = 0.117563 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.117563 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9343 mas, bmaj=2.296 mas, bpa=-4.704 degrees ! Estimated noise=749.389 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00271044 Jy ! Component: 100 - total flux cleaned = 0.00357636 Jy ! Component: 150 - total flux cleaned = 0.00374343 Jy ! Component: 200 - total flux cleaned = 0.00384147 Jy ! Total flux subtracted in 200 components = 0.00384147 Jy ! Clean residual min=-0.003429 max=0.003849 Jy/beam ! Clean residual mean=0.000013 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.121405 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 41 components and 0.121405 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.282 mas, bmaj=3.984 mas, bpa=8.936 degrees ! Estimated noise=948.884 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000596129 Jy ! Component: 100 - total flux cleaned = 0.000705601 Jy ! Component: 150 - total flux cleaned = 0.000763957 Jy ! Component: 200 - total flux cleaned = 0.000764194 Jy ! Total flux subtracted in 200 components = 0.000764194 Jy ! Clean residual min=-0.003667 max=0.004281 Jy/beam ! Clean residual mean=0.000018 rms=0.001175 Jy/beam ! Combined flux in latest and established models = 0.122169 Jy ! Adding 4 model components to the UV plane model. ! The established model now contains 43 components and 0.122169 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9343 mas, bmaj=2.296 mas, bpa=-4.704 degrees ! Estimated noise=749.389 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000367479 Jy ! Component: 100 - total flux cleaned = -0.000449052 Jy ! Component: 150 - total flux cleaned = -0.000427642 Jy ! Component: 200 - total flux cleaned = -0.000406725 Jy ! Total flux subtracted in 200 components = -0.000406725 Jy ! Clean residual min=-0.003405 max=0.003886 Jy/beam ! Clean residual mean=0.000011 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.121762 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.121762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191256Jy sigma=0.001203 ! Fit after self-cal, rms=0.191255Jy sigma=0.001203 wmodel J0050-0452_X_1997_05_07_yyk\_map.mod ! Writing 46 model components to file: J0050-0452_X_1997_05_07_yyk_map.mod wobs J0050-0452_X_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J0050-0452_X_1997_05_07_yyk_uvs.fits wwins J0050-0452_X_1997_05_07_yyk\_map.win ! wwins: Wrote 1 windows to J0050-0452_X_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105365 Jy ! Component: 100 - total flux cleaned = 0.00171666 Jy ! Component: 150 - total flux cleaned = 0.00239032 Jy ! Component: 200 - total flux cleaned = 0.00281407 Jy ! Component: 250 - total flux cleaned = 0.00306974 Jy ! Component: 300 - total flux cleaned = 0.0030217 Jy ! Component: 350 - total flux cleaned = 0.00288005 Jy ! Component: 400 - total flux cleaned = 0.00278871 Jy ! Component: 450 - total flux cleaned = 0.00265557 Jy ! Component: 500 - total flux cleaned = 0.00230953 Jy ! Component: 550 - total flux cleaned = 0.00209959 Jy ! Component: 600 - total flux cleaned = 0.00189367 Jy ! Component: 650 - total flux cleaned = 0.00165292 Jy ! Component: 700 - total flux cleaned = 0.00137954 Jy ! Component: 750 - total flux cleaned = 0.00115204 Jy ! Component: 800 - total flux cleaned = 0.000891306 Jy ! Component: 850 - total flux cleaned = 0.000744916 Jy ! Component: 900 - total flux cleaned = 0.000566235 Jy ! Component: 950 - total flux cleaned = 0.000357461 Jy ! Component: 1000 - total flux cleaned = 0.000220397 Jy ! Component: 1050 - total flux cleaned = -1.5694e-05 Jy ! Component: 1100 - total flux cleaned = -0.00018057 Jy ! Component: 1150 - total flux cleaned = -0.000375958 Jy ! Component: 1200 - total flux cleaned = -0.000472189 Jy ! Component: 1250 - total flux cleaned = -0.00072471 Jy ! Component: 1300 - total flux cleaned = -0.000817404 Jy ! Component: 1350 - total flux cleaned = -0.00103063 Jy ! Component: 1400 - total flux cleaned = -0.00109043 Jy ! Component: 1450 - total flux cleaned = -0.00123888 Jy ! Component: 1500 - total flux cleaned = -0.00144388 Jy ! Component: 1550 - total flux cleaned = -0.00158843 Jy ! Component: 1600 - total flux cleaned = -0.00181541 Jy ! Component: 1650 - total flux cleaned = -0.00189951 Jy ! Component: 1700 - total flux cleaned = -0.00198274 Jy ! Component: 1750 - total flux cleaned = -0.00220145 Jy ! Component: 1800 - total flux cleaned = -0.00236294 Jy ! Component: 1850 - total flux cleaned = -0.00246957 Jy ! Component: 1900 - total flux cleaned = -0.00257481 Jy ! Component: 1950 - total flux cleaned = -0.00278209 Jy ! Component: 2000 - total flux cleaned = -0.00285852 Jy ! Total flux subtracted in 2048 components = -0.00295969 Jy ! Clean residual min=-0.001436 max=0.001669 Jy/beam ! Clean residual mean=0.000011 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.118802 Jy keep ! Adding 133 model components to the UV plane model. ! The established model now contains 179 components and 0.118802 Jy ![Exited script file: muppet] wmap "J0050-0452_X_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9343 x 2.296 at -4.704 degrees (North through East) ! Clean map min=-0.0022729 max=0.10314 Jy/beam ! Writing clean map to FITS file: J0050-0452_X_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.103145 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000487715 device "J0050-0452_X_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J0050-0452_X_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.41854 1.41854 2.83707 5.67414 11.3483 22.6966 45.3932 90.7863 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.103 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9343 x 2.296 at -4.704 degrees (North through East) ! Clean map min=-0.0022729 max=0.10314 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0050-0452_X_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J0050-0452_X_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0050-0452_X_1997_05_07_yyk_uvs.log closed on Mon Jan 8 01:53:10 2007