! Started logfile: J0050-0452_S_1997_05_07_yyk_uvs.log on Sun Jan 7 15:28:26 2007 obs J0050-0452_S_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J0050-0452_S_1997_05_07_yyk_uva.fits ! AN table 1: 148 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.695045 visibilities/baseline/integration-bin. ! Found source: J0050-0452 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 614 lines of history. ! ! Reading 18516 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0050-0452_S_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.359029 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.98 mas, bmaj=7.486 mas, bpa=-3.271 degrees ! Estimated noise=1949.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.148765 Jy ! Component: 100 - total flux cleaned = 0.168313 Jy ! Total flux subtracted in 100 components = 0.168313 Jy ! Clean residual min=-0.014525 max=0.015425 Jy/beam ! Clean residual mean=0.000005 rms=0.004060 Jy/beam ! Combined flux in latest and established models = 0.168313 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.168313 Jy ! ! Correcting IF 1. ! A total of 413 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 266 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 266 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 266 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.317713Jy sigma=0.001250 ! Fit after self-cal, rms=0.317510Jy sigma=0.001249 ! Inverting map and beam ! Estimated beam: bmin=2.98 mas, bmaj=7.486 mas, bpa=-3.271 degrees ! Estimated noise=1949.47 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.577 mas, bmaj=8.824 mas, bpa=-6.586 degrees ! Estimated noise=1221.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122677 Jy ! Component: 100 - total flux cleaned = 0.00177094 Jy ! Component: 150 - total flux cleaned = 0.00223937 Jy ! Component: 200 - total flux cleaned = 0.00265479 Jy ! Total flux subtracted in 200 components = 0.00265479 Jy ! Clean residual min=-0.011193 max=0.011191 Jy/beam ! Clean residual mean=0.000012 rms=0.003154 Jy/beam ! Combined flux in latest and established models = 0.170968 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 15 components and 0.170968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317320Jy sigma=0.001248 ! Fit after self-cal, rms=0.317314Jy sigma=0.001248 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.577 x 8.824 at -6.586 degrees (North through East) ! Clean map min=-0.010912 max=0.16491 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.317314Jy sigma=0.001248 ! Fit after self-cal, rms=0.317309Jy sigma=0.001248 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317309Jy sigma=0.001248 ! Fit after self-cal, rms=0.317306Jy sigma=0.001248 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.577 mas, bmaj=8.823 mas, bpa=-6.586 degrees ! Estimated noise=1222.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000341088 Jy ! Component: 100 - total flux cleaned = 0.000569043 Jy ! Component: 150 - total flux cleaned = 0.000672741 Jy ! Component: 200 - total flux cleaned = 0.000860198 Jy ! Total flux subtracted in 200 components = 0.000860198 Jy ! Clean residual min=-0.011097 max=0.011171 Jy/beam ! Clean residual mean=0.000010 rms=0.003123 Jy/beam ! Combined flux in latest and established models = 0.171828 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 19 components and 0.171828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317230Jy sigma=0.001248 ! Fit after self-cal, rms=0.317225Jy sigma=0.001248 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317225Jy sigma=0.001248 ! Fit after self-cal, rms=0.314891Jy sigma=0.001238 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00317323 Jy ! Component: 100 - total flux cleaned = 0.00297988 Jy ! Component: 150 - total flux cleaned = 0.00305945 Jy ! Component: 200 - total flux cleaned = 0.00313767 Jy ! Total flux subtracted in 200 components = 0.00313767 Jy ! Clean residual min=-0.010365 max=0.010008 Jy/beam ! Clean residual mean=-0.000072 rms=0.002888 Jy/beam ! Combined flux in latest and established models = 0.174966 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 25 components and 0.174966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.314820Jy sigma=0.001238 ! Fit after self-cal, rms=0.314227Jy sigma=0.001236 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.577 x 8.823 at -6.586 degrees (North through East) ! Clean map min=-0.0097347 max=0.16854 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.314227Jy sigma=0.001236 ! Fit after self-cal, rms=0.308043Jy sigma=0.001234 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.308043Jy sigma=0.001234 ! Fit after self-cal, rms=0.307981Jy sigma=0.001234 ! Inverting map and beam ! Estimated beam: bmin=3.672 mas, bmaj=8.649 mas, bpa=-4.947 degrees ! Estimated noise=1184.28 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00323437 Jy ! Component: 100 - total flux cleaned = -0.00387313 Jy ! Component: 150 - total flux cleaned = -0.00412923 Jy ! Component: 200 - total flux cleaned = -0.00417915 Jy ! Total flux subtracted in 200 components = -0.00417915 Jy ! Clean residual min=-0.008822 max=0.006780 Jy/beam ! Clean residual mean=-0.000035 rms=0.002236 Jy/beam ! Combined flux in latest and established models = 0.170787 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 42 components and 0.170787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307875Jy sigma=0.001233 ! Fit after self-cal, rms=0.307830Jy sigma=0.001233 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307830Jy sigma=0.001233 ! Fit after self-cal, rms=0.307066Jy sigma=0.001233 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307066Jy sigma=0.001233 ! Fit after self-cal, rms=0.307015Jy sigma=0.001233 ! Inverting map and beam ! Estimated beam: bmin=3.694 mas, bmaj=8.602 mas, bpa=-4.33 degrees ! Estimated noise=1173.06 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00121423 Jy ! Component: 100 - total flux cleaned = -0.00121864 Jy ! Component: 150 - total flux cleaned = -0.0011735 Jy ! Component: 200 - total flux cleaned = -0.00113208 Jy ! Total flux subtracted in 200 components = -0.00113208 Jy ! Clean residual min=-0.008289 max=0.006849 Jy/beam ! Clean residual mean=-0.000030 rms=0.002164 Jy/beam ! Combined flux in latest and established models = 0.169655 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 50 components and 0.169655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.306981Jy sigma=0.001233 ! Fit after self-cal, rms=0.306954Jy sigma=0.001233 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.011 mas, bmaj=13.82 mas, bpa=11.4 degrees ! Estimated noise=1419.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000332374 Jy ! Component: 100 - total flux cleaned = 0.000402606 Jy ! Component: 150 - total flux cleaned = 0.000451549 Jy ! Component: 200 - total flux cleaned = 0.000448611 Jy ! Total flux subtracted in 200 components = 0.000448611 Jy ! Clean residual min=-0.008949 max=0.008507 Jy/beam ! Clean residual mean=-0.000070 rms=0.002631 Jy/beam ! Combined flux in latest and established models = 0.170103 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 51 components and 0.170103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.306939Jy sigma=0.001233 ! Fit after self-cal, rms=0.306934Jy sigma=0.001233 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.014 mas, bmaj=7.369 mas, bpa=-1.977 degrees ! Estimated noise=1879.58 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.147228 Jy ! Component: 100 - total flux cleaned = 0.169064 Jy ! Component: 150 - total flux cleaned = 0.171552 Jy ! Component: 200 - total flux cleaned = 0.172213 Jy ! Total flux subtracted in 200 components = 0.172213 Jy ! Clean residual min=-0.011254 max=0.010359 Jy/beam ! Clean residual mean=-0.000092 rms=0.003186 Jy/beam ! Combined flux in latest and established models = 0.172213 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.172213 Jy ! Inverting map and beam ! Estimated beam: bmin=3.694 mas, bmaj=8.602 mas, bpa=-4.33 degrees ! Estimated noise=1173.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00182304 Jy ! Component: 100 - total flux cleaned = -0.00212157 Jy ! Component: 150 - total flux cleaned = -0.00220358 Jy ! Component: 200 - total flux cleaned = -0.00227578 Jy ! Total flux subtracted in 200 components = -0.00227578 Jy ! Clean residual min=-0.008517 max=0.007066 Jy/beam ! Clean residual mean=-0.000033 rms=0.002185 Jy/beam ! Combined flux in latest and established models = 0.169938 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 23 components and 0.169938 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.011 mas, bmaj=13.82 mas, bpa=11.4 degrees ! Estimated noise=1419.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -3.76421e-05 Jy ! Component: 100 - total flux cleaned = 4.21754e-05 Jy ! Component: 150 - total flux cleaned = 9.8261e-05 Jy ! Component: 200 - total flux cleaned = 9.80632e-05 Jy ! Total flux subtracted in 200 components = 9.80632e-05 Jy ! Clean residual min=-0.008990 max=0.008482 Jy/beam ! Clean residual mean=-0.000069 rms=0.002639 Jy/beam ! Combined flux in latest and established models = 0.170036 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 26 components and 0.170036 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.694 mas, bmaj=8.602 mas, bpa=-4.33 degrees ! Estimated noise=1173.06 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000225134 Jy ! Component: 100 - total flux cleaned = -0.00045737 Jy ! Component: 150 - total flux cleaned = -0.000577927 Jy ! Component: 200 - total flux cleaned = -0.000674545 Jy ! Total flux subtracted in 200 components = -0.000674545 Jy ! Clean residual min=-0.008359 max=0.006918 Jy/beam ! Clean residual mean=-0.000028 rms=0.002174 Jy/beam ! Combined flux in latest and established models = 0.169361 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 39 components and 0.169361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.306969Jy sigma=0.001233 ! Fit after self-cal, rms=0.306970Jy sigma=0.001233 wmodel J0050-0452_S_1997_05_07_yyk\_map.mod ! Writing 39 model components to file: J0050-0452_S_1997_05_07_yyk_map.mod wobs J0050-0452_S_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J0050-0452_S_1997_05_07_yyk_uvs.fits wwins J0050-0452_S_1997_05_07_yyk\_map.win ! wwins: Wrote 1 windows to J0050-0452_S_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00243432 Jy ! Component: 100 - total flux cleaned = -0.00391561 Jy ! Component: 150 - total flux cleaned = -0.00529589 Jy ! Component: 200 - total flux cleaned = -0.00594378 Jy ! Component: 250 - total flux cleaned = -0.00645811 Jy ! Component: 300 - total flux cleaned = -0.00675901 Jy ! Component: 350 - total flux cleaned = -0.00714147 Jy ! Component: 400 - total flux cleaned = -0.00750875 Jy ! Component: 450 - total flux cleaned = -0.00821786 Jy ! Component: 500 - total flux cleaned = -0.00864697 Jy ! Component: 550 - total flux cleaned = -0.00931521 Jy ! Component: 600 - total flux cleaned = -0.009964 Jy ! Component: 650 - total flux cleaned = -0.0105178 Jy ! Component: 700 - total flux cleaned = -0.0109804 Jy ! Component: 750 - total flux cleaned = -0.0115091 Jy ! Component: 800 - total flux cleaned = -0.0119521 Jy ! Component: 850 - total flux cleaned = -0.0126 Jy ! Component: 900 - total flux cleaned = -0.0129525 Jy ! Component: 950 - total flux cleaned = -0.0133659 Jy ! Component: 1000 - total flux cleaned = -0.0137704 Jy ! Component: 1050 - total flux cleaned = -0.0142999 Jy ! Component: 1100 - total flux cleaned = -0.014754 Jy ! Component: 1150 - total flux cleaned = -0.0153267 Jy ! Component: 1200 - total flux cleaned = -0.015701 Jy ! Component: 1250 - total flux cleaned = -0.0162522 Jy ! Component: 1300 - total flux cleaned = -0.0168532 Jy ! Component: 1350 - total flux cleaned = -0.0173849 Jy ! Component: 1400 - total flux cleaned = -0.017909 Jy ! Component: 1450 - total flux cleaned = -0.0182537 Jy ! Component: 1500 - total flux cleaned = -0.0187634 Jy ! Component: 1550 - total flux cleaned = -0.0191528 Jy ! Component: 1600 - total flux cleaned = -0.0193182 Jy ! Component: 1650 - total flux cleaned = -0.0197503 Jy ! Component: 1700 - total flux cleaned = -0.0200708 Jy ! Component: 1750 - total flux cleaned = -0.0202298 Jy ! Component: 1800 - total flux cleaned = -0.0206961 Jy ! Component: 1850 - total flux cleaned = -0.0209 Jy ! Component: 1900 - total flux cleaned = -0.0211024 Jy ! Component: 1950 - total flux cleaned = -0.0215512 Jy ! Component: 2000 - total flux cleaned = -0.0214525 Jy ! Total flux subtracted in 2048 components = -0.0217935 Jy ! Clean residual min=-0.003311 max=0.003114 Jy/beam ! Clean residual mean=-0.000075 rms=0.001037 Jy/beam ! Combined flux in latest and established models = 0.147568 Jy keep ! Adding 149 model components to the UV plane model. ! The established model now contains 188 components and 0.147567 Jy ![Exited script file: muppet] wmap "J0050-0452_S_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.694 x 8.602 at -4.33 degrees (North through East) ! Clean map min=-0.0058537 max=0.16291 Jy/beam ! Writing clean map to FITS file: J0050-0452_S_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.162909 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00103633 device "J0050-0452_S_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J0050-0452_S_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.90842 1.90842 3.81685 7.63369 15.2674 30.5348 61.0695 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0031 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.162 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.694 x 8.602 at -4.33 degrees (North through East) ! Clean map min=-0.0058537 max=0.16291 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0050-0452_S_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J0050-0452_S_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0050-0452_S_1997_05_07_yyk_uvs.log closed on Sun Jan 7 15:28:32 2007