! Started logfile: J0038-2459_X_1997_07_02_yyk_uvs.log on Mon Jan 8 01:49:11 2007 obs J0038-2459_X_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J0038-2459_X_1997_07_02_yyk_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1.73056 visibilities/baseline/integration-bin. ! Found source: J0038-2459 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 753 lines of history. ! ! Reading 44856 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0038-2459_X_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.393295 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6902 mas, bmaj=1.791 mas, bpa=0.5868 degrees ! Estimated noise=1112.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.274282 Jy ! Component: 100 - total flux cleaned = 0.32466 Jy ! Total flux subtracted in 100 components = 0.32466 Jy ! Clean residual min=-0.009657 max=0.017367 Jy/beam ! Clean residual mean=0.000001 rms=0.003096 Jy/beam ! Combined flux in latest and established models = 0.32466 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.32466 Jy ! ! Correcting IF 1. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.212325Jy sigma=0.001776 ! Fit after self-cal, rms=0.212132Jy sigma=0.001775 ! Inverting map and beam ! Estimated beam: bmin=0.6902 mas, bmaj=1.791 mas, bpa=0.5868 degrees ! Estimated noise=1112.25 mJy/beam. ! Added new window around map position (-1.6, -0.6). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0225357 Jy ! Component: 100 - total flux cleaned = 0.0347351 Jy ! Total flux subtracted in 100 components = 0.0347351 Jy ! Clean residual min=-0.009291 max=0.013702 Jy/beam ! Clean residual mean=-0.000003 rms=0.002552 Jy/beam ! Combined flux in latest and established models = 0.359395 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 26 components and 0.359395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210094Jy sigma=0.001749 ! Fit after self-cal, rms=0.209903Jy sigma=0.001748 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9138 mas, bmaj=2.397 mas, bpa=-0.1262 degrees ! Estimated noise=512.252 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170383 Jy ! Component: 100 - total flux cleaned = 0.0245665 Jy ! Component: 150 - total flux cleaned = 0.0271501 Jy ! Component: 200 - total flux cleaned = 0.0282276 Jy ! Total flux subtracted in 200 components = 0.0282276 Jy ! Clean residual min=-0.005604 max=0.007891 Jy/beam ! Clean residual mean=-0.000049 rms=0.001879 Jy/beam ! Combined flux in latest and established models = 0.387623 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 49 components and 0.387623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209390Jy sigma=0.001738 ! Fit after self-cal, rms=0.209360Jy sigma=0.001738 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9138 x 2.397 at -0.1262 degrees (North through East) ! Clean map min=-0.0052144 max=0.32796 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.999623 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 1.04 KP 1.00 ! LA 1.00 MK 1.03 NL 0.99 OV 1.00 ! PT 0.94 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01033 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 1.01 KP 0.99 ! LA 0.98 MK 0.98 NL 0.99 OV 1.06 ! PT 0.90 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.988998 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.06 HN 1.09 KP 0.99 ! LA 1.00 MK 1.00 NL 1.01 OV 1.00 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.986251 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.04 HN 1.08 KP 0.99 ! LA 1.00 MK 1.01 NL 0.99 OV 1.00 ! PT 0.98 SC 1.00 ! ! ! Fit before self-cal, rms=0.209360Jy sigma=0.001738 ! Fit after self-cal, rms=0.209327Jy sigma=0.001733 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209327Jy sigma=0.001733 ! Fit after self-cal, rms=0.209330Jy sigma=0.001733 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9162 mas, bmaj=2.391 mas, bpa=0.3007 degrees ! Estimated noise=506.768 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.8, 5.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00518743 Jy ! Component: 100 - total flux cleaned = 0.00614017 Jy ! Component: 150 - total flux cleaned = 0.00615616 Jy ! Component: 200 - total flux cleaned = 0.00615847 Jy ! Total flux subtracted in 200 components = 0.00615847 Jy ! Clean residual min=-0.003199 max=0.003503 Jy/beam ! Clean residual mean=0.000002 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.393781 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 67 components and 0.393781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209073Jy sigma=0.001731 ! Fit after self-cal, rms=0.209065Jy sigma=0.001730 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209065Jy sigma=0.001730 ! Fit after self-cal, rms=0.202237Jy sigma=0.001672 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188666 Jy ! Component: 100 - total flux cleaned = 0.00220154 Jy ! Component: 150 - total flux cleaned = 0.00237821 Jy ! Component: 200 - total flux cleaned = 0.00245368 Jy ! Total flux subtracted in 200 components = 0.00245368 Jy ! Clean residual min=-0.002811 max=0.003209 Jy/beam ! Clean residual mean=0.000004 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.396235 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 77 components and 0.396235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202191Jy sigma=0.001672 ! Fit after self-cal, rms=0.201268Jy sigma=0.001664 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9162 x 2.391 at 0.3007 degrees (North through East) ! Clean map min=-0.0036578 max=0.33199 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201268Jy sigma=0.001664 ! Fit after self-cal, rms=0.214787Jy sigma=0.001659 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214787Jy sigma=0.001659 ! Fit after self-cal, rms=0.214626Jy sigma=0.001657 ! Inverting map and beam ! Estimated beam: bmin=0.9094 mas, bmaj=2.362 mas, bpa=0.9483 degrees ! Estimated noise=503.773 mJy/beam. ! Added new window around map position (6.2, -5.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275401 Jy ! Component: 100 - total flux cleaned = 0.00307539 Jy ! Component: 150 - total flux cleaned = 0.0030137 Jy ! Component: 200 - total flux cleaned = 0.00295462 Jy ! Total flux subtracted in 200 components = 0.00295462 Jy ! Clean residual min=-0.002572 max=0.002458 Jy/beam ! Clean residual mean=0.000020 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.39919 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 96 components and 0.39919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214566Jy sigma=0.001657 ! Fit after self-cal, rms=0.214529Jy sigma=0.001656 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214529Jy sigma=0.001656 ! Fit after self-cal, rms=0.215056Jy sigma=0.001654 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215056Jy sigma=0.001654 ! Fit after self-cal, rms=0.215057Jy sigma=0.001654 ! Inverting map and beam ! Estimated beam: bmin=0.9088 mas, bmaj=2.361 mas, bpa=0.9575 degrees ! Estimated noise=503.355 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000798942 Jy ! Component: 100 - total flux cleaned = 0.000797052 Jy ! Component: 150 - total flux cleaned = 0.000750331 Jy ! Component: 200 - total flux cleaned = 0.000749232 Jy ! Total flux subtracted in 200 components = 0.000749232 Jy ! Clean residual min=-0.002489 max=0.002474 Jy/beam ! Clean residual mean=0.000019 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.399939 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 114 components and 0.399939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215038Jy sigma=0.001654 ! Fit after self-cal, rms=0.215043Jy sigma=0.001654 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.41 mas, bmaj=5.812 mas, bpa=4.024 degrees ! Estimated noise=637.295 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000369766 Jy ! Component: 100 - total flux cleaned = 0.000208867 Jy ! Component: 150 - total flux cleaned = 3.95248e-05 Jy ! Component: 200 - total flux cleaned = -2.11063e-05 Jy ! Total flux subtracted in 200 components = -2.11063e-05 Jy ! Clean residual min=-0.002652 max=0.002831 Jy/beam ! Clean residual mean=0.000036 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.399918 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 131 components and 0.399918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215044Jy sigma=0.001654 ! Fit after self-cal, rms=0.215049Jy sigma=0.001654 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6875 mas, bmaj=1.767 mas, bpa=1.212 degrees ! Estimated noise=1117.99 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.281928 Jy ! Component: 100 - total flux cleaned = 0.332863 Jy ! Component: 150 - total flux cleaned = 0.351847 Jy ! Component: 200 - total flux cleaned = 0.363465 Jy ! Total flux subtracted in 200 components = 0.363465 Jy ! Clean residual min=-0.007167 max=0.006959 Jy/beam ! Clean residual mean=-0.000001 rms=0.001772 Jy/beam ! Combined flux in latest and established models = 0.363465 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.363465 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9088 mas, bmaj=2.361 mas, bpa=0.9575 degrees ! Estimated noise=503.355 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, 2.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.014012 Jy ! Component: 100 - total flux cleaned = 0.0214366 Jy ! Component: 150 - total flux cleaned = 0.0263867 Jy ! Component: 200 - total flux cleaned = 0.0299652 Jy ! Total flux subtracted in 200 components = 0.0299652 Jy ! Clean residual min=-0.002659 max=0.002882 Jy/beam ! Clean residual mean=0.000016 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.393431 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 70 components and 0.393431 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.41 mas, bmaj=5.812 mas, bpa=4.024 degrees ! Estimated noise=637.295 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00358012 Jy ! Component: 100 - total flux cleaned = 0.00505104 Jy ! Component: 150 - total flux cleaned = 0.00575924 Jy ! Component: 200 - total flux cleaned = 0.00627058 Jy ! Total flux subtracted in 200 components = 0.00627058 Jy ! Clean residual min=-0.002402 max=0.002637 Jy/beam ! Clean residual mean=0.000036 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.399701 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 103 components and 0.399701 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9088 mas, bmaj=2.361 mas, bpa=0.9575 degrees ! Estimated noise=503.355 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000522787 Jy ! Component: 100 - total flux cleaned = 0.000579555 Jy ! Component: 150 - total flux cleaned = 0.000627987 Jy ! Component: 200 - total flux cleaned = 0.000581202 Jy ! Total flux subtracted in 200 components = 0.000581202 Jy ! Clean residual min=-0.002251 max=0.002522 Jy/beam ! Clean residual mean=0.000019 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.400282 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 122 components and 0.400282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215055Jy sigma=0.001654 ! Fit after self-cal, rms=0.215048Jy sigma=0.001654 wmodel J0038-2459_X_1997_07_02_yyk\_map.mod ! Writing 122 model components to file: J0038-2459_X_1997_07_02_yyk_map.mod wobs J0038-2459_X_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J0038-2459_X_1997_07_02_yyk_uvs.fits wwins J0038-2459_X_1997_07_02_yyk\_map.win ! wwins: Wrote 5 windows to J0038-2459_X_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000613535 Jy ! Component: 100 - total flux cleaned = 0.000892632 Jy ! Component: 150 - total flux cleaned = 0.00119472 Jy ! Component: 200 - total flux cleaned = 0.00133983 Jy ! Component: 250 - total flux cleaned = 0.00158578 Jy ! Component: 300 - total flux cleaned = 0.00165259 Jy ! Component: 350 - total flux cleaned = 0.00168501 Jy ! Component: 400 - total flux cleaned = 0.00171672 Jy ! Component: 450 - total flux cleaned = 0.00177927 Jy ! Component: 500 - total flux cleaned = 0.00181005 Jy ! Component: 550 - total flux cleaned = 0.00192789 Jy ! Component: 600 - total flux cleaned = 0.00195649 Jy ! Component: 650 - total flux cleaned = 0.00201254 Jy ! Component: 700 - total flux cleaned = 0.00209492 Jy ! Component: 750 - total flux cleaned = 0.00217592 Jy ! Component: 800 - total flux cleaned = 0.00222947 Jy ! Component: 850 - total flux cleaned = 0.00233368 Jy ! Component: 900 - total flux cleaned = 0.002411 Jy ! Component: 950 - total flux cleaned = 0.00256128 Jy ! Component: 1000 - total flux cleaned = 0.00258556 Jy ! Component: 1050 - total flux cleaned = 0.00263392 Jy ! Component: 1100 - total flux cleaned = 0.00268132 Jy ! Component: 1150 - total flux cleaned = 0.00265792 Jy ! Component: 1200 - total flux cleaned = 0.00272795 Jy ! Component: 1250 - total flux cleaned = 0.0027739 Jy ! Component: 1300 - total flux cleaned = 0.00284177 Jy ! Component: 1350 - total flux cleaned = 0.00281951 Jy ! Component: 1400 - total flux cleaned = 0.00290809 Jy ! Component: 1450 - total flux cleaned = 0.00301712 Jy ! Component: 1500 - total flux cleaned = 0.00308191 Jy ! Component: 1550 - total flux cleaned = 0.00320942 Jy ! Component: 1600 - total flux cleaned = 0.00312548 Jy ! Component: 1650 - total flux cleaned = 0.00316715 Jy ! Component: 1700 - total flux cleaned = 0.00320818 Jy ! Component: 1750 - total flux cleaned = 0.00316776 Jy ! Component: 1800 - total flux cleaned = 0.00318798 Jy ! Component: 1850 - total flux cleaned = 0.00328718 Jy ! Component: 1900 - total flux cleaned = 0.00330681 Jy ! Component: 1950 - total flux cleaned = 0.00324844 Jy ! Component: 2000 - total flux cleaned = 0.00319131 Jy ! Total flux subtracted in 2048 components = 0.00332472 Jy ! Clean residual min=-0.001295 max=0.000947 Jy/beam ! Clean residual mean=0.000010 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.403607 Jy keep ! Adding 149 model components to the UV plane model. ! The established model now contains 271 components and 0.403607 Jy ![Exited script file: muppet] wmap "J0038-2459_X_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9088 x 2.361 at 0.9575 degrees (North through East) ! Clean map min=-0.0016397 max=0.33122 Jy/beam ! Writing clean map to FITS file: J0038-2459_X_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.331224 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000363435 device "J0038-2459_X_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J0038-2459_X_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.329175 0.329175 0.658349 1.3167 2.6334 5.2668 10.5336 21.0672 42.1344 84.2687 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.331 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9088 x 2.361 at 0.9575 degrees (North through East) ! Clean map min=-0.0016397 max=0.33122 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0038-2459_X_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J0038-2459_X_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0038-2459_X_1997_07_02_yyk_uvs.log closed on Mon Jan 8 01:49:21 2007