! Started logfile: J0024-0412_S_1997_05_07_yyk_uvs.log on Sun Jan 7 15:23:05 2007 obs J0024-0412_S_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J0024-0412_S_1997_05_07_yyk_uva.fits ! AN table 1: 141 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.615288 visibilities/baseline/integration-bin. ! Found source: J0024-0412 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 614 lines of history. ! ! Reading 15616 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0024-0412_S_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.445183 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.978 mas, bmaj=7.311 mas, bpa=-4.079 degrees ! Estimated noise=1784.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.260186 Jy ! Component: 100 - total flux cleaned = 0.304339 Jy ! Total flux subtracted in 100 components = 0.304339 Jy ! Clean residual min=-0.014473 max=0.021373 Jy/beam ! Clean residual mean=0.000933 rms=0.004529 Jy/beam ! Combined flux in latest and established models = 0.304339 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.304339 Jy ! ! Correcting IF 1. ! A total of 466 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 345 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 344 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 344 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.314575Jy sigma=0.001236 ! Fit after self-cal, rms=0.314376Jy sigma=0.001235 ! Inverting map and beam ! Estimated beam: bmin=2.978 mas, bmaj=7.311 mas, bpa=-4.078 degrees ! Estimated noise=1784.22 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.671 mas, bmaj=8.907 mas, bpa=-7.419 degrees ! Estimated noise=1326.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.024248 Jy ! Component: 100 - total flux cleaned = 0.0353877 Jy ! Component: 150 - total flux cleaned = 0.0381184 Jy ! Component: 200 - total flux cleaned = 0.039631 Jy ! Total flux subtracted in 200 components = 0.039631 Jy ! Clean residual min=-0.011314 max=0.019140 Jy/beam ! Clean residual mean=0.000806 rms=0.003992 Jy/beam ! Combined flux in latest and established models = 0.34397 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 28 components and 0.34397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.312601Jy sigma=0.001228 ! Fit after self-cal, rms=0.312539Jy sigma=0.001228 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.671 x 8.907 at -7.419 degrees (North through East) ! Clean map min=-0.010517 max=0.29408 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00157 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 1.04 KP 0.84 ! LA 0.98 MK 1.01 NL 1.00* OV 1.37 ! PT 0.94 SC 0.81 ! ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.971654 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.10 HN 1.17 KP 1.03 ! LA 1.07 MK 1.03 NL 1.00 OV 1.06 ! PT 0.92 SC 0.91 ! ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.0566 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.03 HN 1.03 KP 0.84 ! LA 0.79 MK 0.89 NL 0.97 OV 0.96 ! PT 1.04 SC 0.98 ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.996832 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 1.13 KP 0.97 ! LA 0.83 MK 1.01 NL 1.15 OV 1.05 ! PT 0.88 SC 0.99 ! ! ! Fit before self-cal, rms=0.312539Jy sigma=0.001228 ! Fit after self-cal, rms=0.308005Jy sigma=0.001215 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.308005Jy sigma=0.001215 ! Fit after self-cal, rms=0.308015Jy sigma=0.001215 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.651 mas, bmaj=8.721 mas, bpa=-6.493 degrees ! Estimated noise=1324.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00461091 Jy ! Component: 100 - total flux cleaned = 0.0048588 Jy ! Component: 150 - total flux cleaned = 0.00496577 Jy ! Component: 200 - total flux cleaned = 0.00505485 Jy ! Total flux subtracted in 200 components = 0.00505485 Jy ! Clean residual min=-0.007821 max=0.011635 Jy/beam ! Clean residual mean=0.000080 rms=0.002648 Jy/beam ! Combined flux in latest and established models = 0.349025 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 36 components and 0.349025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307940Jy sigma=0.001215 ! Fit after self-cal, rms=0.307916Jy sigma=0.001214 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307916Jy sigma=0.001214 ! Fit after self-cal, rms=0.305630Jy sigma=0.001206 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.5, -2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119881 Jy ! Component: 100 - total flux cleaned = 0.0135093 Jy ! Component: 150 - total flux cleaned = 0.0131063 Jy ! Component: 200 - total flux cleaned = 0.0121888 Jy ! Total flux subtracted in 200 components = 0.0121888 Jy ! Clean residual min=-0.006694 max=0.007365 Jy/beam ! Clean residual mean=-0.000121 rms=0.002048 Jy/beam ! Combined flux in latest and established models = 0.361213 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 76 components and 0.361214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.305041Jy sigma=0.001203 ! Fit after self-cal, rms=0.304600Jy sigma=0.001201 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.651 x 8.721 at -6.493 degrees (North through East) ! Clean map min=-0.0077173 max=0.29592 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.304600Jy sigma=0.001201 ! Fit after self-cal, rms=0.444901Jy sigma=0.001190 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.444901Jy sigma=0.001190 ! Fit after self-cal, rms=0.444783Jy sigma=0.001190 ! Inverting map and beam ! Estimated beam: bmin=3.634 mas, bmaj=8.626 mas, bpa=-6.389 degrees ! Estimated noise=1304.29 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00564423 Jy ! Component: 100 - total flux cleaned = 0.00484736 Jy ! Component: 150 - total flux cleaned = 0.00416717 Jy ! Component: 200 - total flux cleaned = 0.00369756 Jy ! Total flux subtracted in 200 components = 0.00369756 Jy ! Clean residual min=-0.004943 max=0.004823 Jy/beam ! Clean residual mean=-0.000132 rms=0.001340 Jy/beam ! Combined flux in latest and established models = 0.364911 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 106 components and 0.364911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.444619Jy sigma=0.001189 ! Fit after self-cal, rms=0.444564Jy sigma=0.001189 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.444564Jy sigma=0.001189 ! Fit after self-cal, rms=0.514252Jy sigma=0.001188 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.514252Jy sigma=0.001188 ! Fit after self-cal, rms=0.514449Jy sigma=0.001188 ! Inverting map and beam ! Estimated beam: bmin=3.631 mas, bmaj=8.6 mas, bpa=-6.356 degrees ! Estimated noise=1304.84 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305468 Jy ! Component: 100 - total flux cleaned = 0.00251415 Jy ! Component: 150 - total flux cleaned = 0.00233928 Jy ! Component: 200 - total flux cleaned = 0.00226295 Jy ! Total flux subtracted in 200 components = 0.00226295 Jy ! Clean residual min=-0.004643 max=0.004011 Jy/beam ! Clean residual mean=-0.000137 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 0.367174 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 118 components and 0.367174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.514376Jy sigma=0.001187 ! Fit after self-cal, rms=0.514201Jy sigma=0.001187 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.922 mas, bmaj=13.49 mas, bpa=9.539 degrees ! Estimated noise=1590.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000896277 Jy ! Component: 100 - total flux cleaned = 0.000457794 Jy ! Component: 150 - total flux cleaned = 0.000135402 Jy ! Component: 200 - total flux cleaned = -6.65979e-05 Jy ! Total flux subtracted in 200 components = -6.65979e-05 Jy ! Clean residual min=-0.004445 max=0.004840 Jy/beam ! Clean residual mean=-0.000259 rms=0.001473 Jy/beam ! Combined flux in latest and established models = 0.367107 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 127 components and 0.367108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.514150Jy sigma=0.001187 ! Fit after self-cal, rms=0.514208Jy sigma=0.001187 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.957 mas, bmaj=7.184 mas, bpa=-3.151 degrees ! Estimated noise=1761.38 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.257831 Jy ! Component: 100 - total flux cleaned = 0.306873 Jy ! Component: 150 - total flux cleaned = 0.330501 Jy ! Component: 200 - total flux cleaned = 0.343799 Jy ! Total flux subtracted in 200 components = 0.343799 Jy ! Clean residual min=-0.007311 max=0.007791 Jy/beam ! Clean residual mean=0.000187 rms=0.002168 Jy/beam ! Combined flux in latest and established models = 0.343799 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.343799 Jy ! Inverting map and beam ! Estimated beam: bmin=3.631 mas, bmaj=8.6 mas, bpa=-6.356 degrees ! Estimated noise=1304.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113899 Jy ! Component: 100 - total flux cleaned = 0.0153401 Jy ! Component: 150 - total flux cleaned = 0.0182862 Jy ! Component: 200 - total flux cleaned = 0.0196818 Jy ! Total flux subtracted in 200 components = 0.0196818 Jy ! Clean residual min=-0.004532 max=0.004869 Jy/beam ! Clean residual mean=-0.000069 rms=0.001289 Jy/beam ! Combined flux in latest and established models = 0.363481 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 70 components and 0.363481 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.922 mas, bmaj=13.49 mas, bpa=9.539 degrees ! Estimated noise=1590.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167432 Jy ! Component: 100 - total flux cleaned = 0.00210949 Jy ! Component: 150 - total flux cleaned = 0.00249823 Jy ! Component: 200 - total flux cleaned = 0.0025568 Jy ! Total flux subtracted in 200 components = 0.0025568 Jy ! Clean residual min=-0.004475 max=0.005083 Jy/beam ! Clean residual mean=-0.000221 rms=0.001436 Jy/beam ! Combined flux in latest and established models = 0.366038 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 104 components and 0.366038 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.631 mas, bmaj=8.6 mas, bpa=-6.356 degrees ! Estimated noise=1304.84 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000448659 Jy ! Component: 100 - total flux cleaned = -0.000538054 Jy ! Component: 150 - total flux cleaned = -0.000454317 Jy ! Component: 200 - total flux cleaned = -0.000454436 Jy ! Total flux subtracted in 200 components = -0.000454436 Jy ! Clean residual min=-0.003968 max=0.004550 Jy/beam ! Clean residual mean=-0.000111 rms=0.001183 Jy/beam ! Combined flux in latest and established models = 0.365583 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 119 components and 0.365583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.514237Jy sigma=0.001188 ! Fit after self-cal, rms=0.514420Jy sigma=0.001188 wmodel J0024-0412_S_1997_05_07_yyk\_map.mod ! Writing 119 model components to file: J0024-0412_S_1997_05_07_yyk_map.mod wobs J0024-0412_S_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J0024-0412_S_1997_05_07_yyk_uvs.fits wwins J0024-0412_S_1997_05_07_yyk\_map.win ! wwins: Wrote 2 windows to J0024-0412_S_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000371651 Jy ! Component: 100 - total flux cleaned = 0.000858203 Jy ! Component: 150 - total flux cleaned = 0.00118709 Jy ! Component: 200 - total flux cleaned = 0.00150112 Jy ! Component: 250 - total flux cleaned = 0.00174157 Jy ! Component: 300 - total flux cleaned = 0.00203099 Jy ! Component: 350 - total flux cleaned = 0.0021998 Jy ! Component: 400 - total flux cleaned = 0.00257417 Jy ! Component: 450 - total flux cleaned = 0.00287991 Jy ! Component: 500 - total flux cleaned = 0.00302781 Jy ! Component: 550 - total flux cleaned = 0.00322071 Jy ! Component: 600 - total flux cleaned = 0.00345345 Jy ! Component: 650 - total flux cleaned = 0.00349919 Jy ! Component: 700 - total flux cleaned = 0.00363287 Jy ! Component: 750 - total flux cleaned = 0.00372082 Jy ! Component: 800 - total flux cleaned = 0.00393136 Jy ! Component: 850 - total flux cleaned = 0.00405486 Jy ! Component: 900 - total flux cleaned = 0.00425596 Jy ! Component: 950 - total flux cleaned = 0.00457064 Jy ! Component: 1000 - total flux cleaned = 0.00480181 Jy ! Component: 1050 - total flux cleaned = 0.00506672 Jy ! Component: 1100 - total flux cleaned = 0.0054018 Jy ! Component: 1150 - total flux cleaned = 0.00569415 Jy ! Component: 1200 - total flux cleaned = 0.00594526 Jy ! Component: 1250 - total flux cleaned = 0.00608713 Jy ! Component: 1300 - total flux cleaned = 0.00636663 Jy ! Component: 1350 - total flux cleaned = 0.00653801 Jy ! Component: 1400 - total flux cleaned = 0.00677534 Jy ! Component: 1450 - total flux cleaned = 0.00694217 Jy ! Component: 1500 - total flux cleaned = 0.00704096 Jy ! Component: 1550 - total flux cleaned = 0.00713873 Jy ! Component: 1600 - total flux cleaned = 0.00749102 Jy ! Component: 1650 - total flux cleaned = 0.00768054 Jy ! Component: 1700 - total flux cleaned = 0.00786813 Jy ! Component: 1750 - total flux cleaned = 0.00817633 Jy ! Component: 1800 - total flux cleaned = 0.00845006 Jy ! Component: 1850 - total flux cleaned = 0.00863041 Jy ! Component: 1900 - total flux cleaned = 0.00889774 Jy ! Component: 1950 - total flux cleaned = 0.00907409 Jy ! Component: 2000 - total flux cleaned = 0.00936434 Jy ! Total flux subtracted in 2048 components = 0.00962194 Jy ! Clean residual min=-0.001656 max=0.001757 Jy/beam ! Clean residual mean=-0.000002 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.375205 Jy keep ! Adding 121 model components to the UV plane model. ! The established model now contains 240 components and 0.375205 Jy ![Exited script file: muppet] wmap "J0024-0412_S_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.631 x 8.6 at -6.356 degrees (North through East) ! Clean map min=-0.0066198 max=0.29837 Jy/beam ! Writing clean map to FITS file: J0024-0412_S_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.298374 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000567756 device "J0024-0412_S_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J0024-0412_S_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.570849 0.570849 1.1417 2.2834 4.56679 9.13358 18.2672 36.5343 73.0686 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.298 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.631 x 8.6 at -6.356 degrees (North through East) ! Clean map min=-0.0066198 max=0.29837 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0024-0412_S_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J0024-0412_S_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0024-0412_S_1997_05_07_yyk_uvs.log closed on Sun Jan 7 15:23:11 2007