! Started logfile: J0016-0015_S_1997_05_07_yyk_uvs.log on Sun Jan 7 15:18:15 2007 obs J0016-0015_S_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J0016-0015_S_1997_05_07_yyk_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.935648 visibilities/baseline/integration-bin. ! Found source: J0016-0015 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 614 lines of history. ! ! Reading 24252 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0016-0015_S_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.910888 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.832 mas, bmaj=7.321 mas, bpa=-4.998 degrees ! Estimated noise=1871.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.704003 Jy ! Component: 100 - total flux cleaned = 0.822966 Jy ! Total flux subtracted in 100 components = 0.822966 Jy ! Clean residual min=-0.024079 max=0.037045 Jy/beam ! Clean residual mean=0.000124 rms=0.007269 Jy/beam ! Combined flux in latest and established models = 0.822966 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.822966 Jy ! ! Correcting IF 1. ! A total of 165 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.329379Jy sigma=0.001373 ! Fit after self-cal, rms=0.329164Jy sigma=0.001372 ! Inverting map and beam ! Estimated beam: bmin=2.832 mas, bmaj=7.321 mas, bpa=-4.998 degrees ! Estimated noise=1871.25 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.499 mas, bmaj=8.483 mas, bpa=-4.56 degrees ! Estimated noise=978.471 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0680267 Jy ! Component: 100 - total flux cleaned = 0.0987592 Jy ! Component: 150 - total flux cleaned = 0.114535 Jy ! Component: 200 - total flux cleaned = 0.123311 Jy ! Total flux subtracted in 200 components = 0.123311 Jy ! Clean residual min=-0.019094 max=0.022623 Jy/beam ! Clean residual mean=0.000338 rms=0.005895 Jy/beam ! Combined flux in latest and established models = 0.946277 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 39 components and 0.946277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.319173Jy sigma=0.001320 ! Fit after self-cal, rms=0.319133Jy sigma=0.001320 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.499 x 8.483 at -4.56 degrees (North through East) ! Clean map min=-0.018283 max=0.82018 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.0321 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.05 HN 0.99 KP 0.89 ! LA 0.98 MK 0.96 NL 1.00* OV 1.09 ! PT 0.93 SC 0.84 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.972407 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.11 HN 1.09 KP 0.99 ! LA 1.07 MK 1.02 NL 1.10 OV 1.01 ! PT 0.92 SC 0.95 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.04959 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.05 HN 0.96 KP 0.90 ! LA 0.80 MK 0.86 NL 0.97 OV 0.94 ! PT 1.06 SC 1.04 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.970147 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.09 HN 1.08 KP 0.95 ! LA 0.88 MK 1.02 NL 1.19 OV 1.11 ! PT 0.92 SC 1.05 ! ! ! Fit before self-cal, rms=0.319133Jy sigma=0.001320 ! Fit after self-cal, rms=0.303899Jy sigma=0.001266 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.303899Jy sigma=0.001266 ! Fit after self-cal, rms=0.303898Jy sigma=0.001266 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.476 mas, bmaj=8.4 mas, bpa=-4.204 degrees ! Estimated noise=975.874 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, 4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00811937 Jy ! Component: 100 - total flux cleaned = 0.00949225 Jy ! Component: 150 - total flux cleaned = 0.0097685 Jy ! Component: 200 - total flux cleaned = 0.00955732 Jy ! Total flux subtracted in 200 components = 0.00955732 Jy ! Clean residual min=-0.005983 max=0.006755 Jy/beam ! Clean residual mean=0.000019 rms=0.001656 Jy/beam ! Combined flux in latest and established models = 0.955834 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 56 components and 0.955835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.303193Jy sigma=0.001263 ! Fit after self-cal, rms=0.303109Jy sigma=0.001263 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.303109Jy sigma=0.001263 ! Fit after self-cal, rms=0.293992Jy sigma=0.001226 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252693 Jy ! Component: 100 - total flux cleaned = 0.00254311 Jy ! Component: 150 - total flux cleaned = 0.00219549 Jy ! Component: 200 - total flux cleaned = 0.00204262 Jy ! Total flux subtracted in 200 components = 0.00204262 Jy ! Clean residual min=-0.005356 max=0.006158 Jy/beam ! Clean residual mean=0.000006 rms=0.001498 Jy/beam ! Combined flux in latest and established models = 0.957877 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 72 components and 0.957877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293710Jy sigma=0.001225 ! Fit after self-cal, rms=0.292503Jy sigma=0.001221 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.476 x 8.4 at -4.204 degrees (North through East) ! Clean map min=-0.0054901 max=0.81979 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.292503Jy sigma=0.001221 ! Fit after self-cal, rms=0.279711Jy sigma=0.001186 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.279711Jy sigma=0.001186 ! Fit after self-cal, rms=0.279317Jy sigma=0.001184 ! Inverting map and beam ! Estimated beam: bmin=3.463 mas, bmaj=8.347 mas, bpa=-3.853 degrees ! Estimated noise=970.545 mJy/beam. ! Added new window around map position (21, 13.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00579497 Jy ! Component: 100 - total flux cleaned = 0.00610622 Jy ! Component: 150 - total flux cleaned = 0.00638748 Jy ! Component: 200 - total flux cleaned = 0.00615162 Jy ! Total flux subtracted in 200 components = 0.00615162 Jy ! Clean residual min=-0.003681 max=0.004569 Jy/beam ! Clean residual mean=0.000005 rms=0.001135 Jy/beam ! Combined flux in latest and established models = 0.964029 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 89 components and 0.964029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.279138Jy sigma=0.001183 ! Fit after self-cal, rms=0.278907Jy sigma=0.001183 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278907Jy sigma=0.001183 ! Fit after self-cal, rms=0.278844Jy sigma=0.001181 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278844Jy sigma=0.001181 ! Fit after self-cal, rms=0.278712Jy sigma=0.001180 ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=8.33 mas, bpa=-3.749 degrees ! Estimated noise=970.135 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000946024 Jy ! Component: 100 - total flux cleaned = 0.00116634 Jy ! Component: 150 - total flux cleaned = 0.00116587 Jy ! Component: 200 - total flux cleaned = 0.00116223 Jy ! Total flux subtracted in 200 components = 0.00116223 Jy ! Clean residual min=-0.003499 max=0.004242 Jy/beam ! Clean residual mean=0.000007 rms=0.001071 Jy/beam ! Combined flux in latest and established models = 0.965191 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 101 components and 0.965191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278650Jy sigma=0.001180 ! Fit after self-cal, rms=0.278544Jy sigma=0.001180 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.173 mas, bmaj=12.64 mas, bpa=-0.1868 degrees ! Estimated noise=1219.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000830603 Jy ! Component: 100 - total flux cleaned = 0.00103091 Jy ! Component: 150 - total flux cleaned = 0.00109131 Jy ! Component: 200 - total flux cleaned = 0.00104554 Jy ! Total flux subtracted in 200 components = 0.00104554 Jy ! Clean residual min=-0.003895 max=0.004589 Jy/beam ! Clean residual mean=0.000001 rms=0.001338 Jy/beam ! Combined flux in latest and established models = 0.966236 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 117 components and 0.966236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278540Jy sigma=0.001179 ! Fit after self-cal, rms=0.278459Jy sigma=0.001179 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.814 mas, bmaj=7.248 mas, bpa=-4.688 degrees ! Estimated noise=1853.57 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.700586 Jy ! Component: 100 - total flux cleaned = 0.822016 Jy ! Component: 150 - total flux cleaned = 0.871345 Jy ! Component: 200 - total flux cleaned = 0.896168 Jy ! Total flux subtracted in 200 components = 0.896168 Jy ! Clean residual min=-0.007277 max=0.009769 Jy/beam ! Clean residual mean=0.000083 rms=0.002323 Jy/beam ! Combined flux in latest and established models = 0.896168 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.896168 Jy ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=8.33 mas, bpa=-3.749 degrees ! Estimated noise=970.135 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0285635 Jy ! Component: 100 - total flux cleaned = 0.043627 Jy ! Component: 150 - total flux cleaned = 0.0531233 Jy ! Component: 200 - total flux cleaned = 0.0596547 Jy ! Total flux subtracted in 200 components = 0.0596547 Jy ! Clean residual min=-0.004833 max=0.005996 Jy/beam ! Clean residual mean=0.000043 rms=0.001315 Jy/beam ! Combined flux in latest and established models = 0.955823 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 97 components and 0.955823 Jy ! Inverting map ! Added new window around map position (-4.5, 6.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00472612 Jy ! Component: 100 - total flux cleaned = 0.0062885 Jy ! Component: 150 - total flux cleaned = 0.00729498 Jy ! Component: 200 - total flux cleaned = 0.00802817 Jy ! Total flux subtracted in 200 components = 0.00802817 Jy ! Clean residual min=-0.003382 max=0.003957 Jy/beam ! Clean residual mean=0.000003 rms=0.001034 Jy/beam ! Combined flux in latest and established models = 0.963852 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 139 components and 0.963851 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.173 mas, bmaj=12.64 mas, bpa=-0.1868 degrees ! Estimated noise=1219.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222058 Jy ! Component: 100 - total flux cleaned = 0.00297589 Jy ! Component: 150 - total flux cleaned = 0.00330158 Jy ! Component: 200 - total flux cleaned = 0.00324381 Jy ! Total flux subtracted in 200 components = 0.00324381 Jy ! Clean residual min=-0.003649 max=0.004364 Jy/beam ! Clean residual mean=-0.000015 rms=0.001273 Jy/beam ! Combined flux in latest and established models = 0.967095 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 177 components and 0.967095 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=8.33 mas, bpa=-3.749 degrees ! Estimated noise=970.135 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000703187 Jy ! Component: 100 - total flux cleaned = -0.000867323 Jy ! Component: 150 - total flux cleaned = -0.000784124 Jy ! Component: 200 - total flux cleaned = -0.000638208 Jy ! Total flux subtracted in 200 components = -0.000638208 Jy ! Clean residual min=-0.003454 max=0.003623 Jy/beam ! Clean residual mean=-0.000006 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 0.966457 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 196 components and 0.966457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278356Jy sigma=0.001179 ! Fit after self-cal, rms=0.278294Jy sigma=0.001178 wmodel J0016-0015_S_1997_05_07_yyk\_map.mod ! Writing 196 model components to file: J0016-0015_S_1997_05_07_yyk_map.mod wobs J0016-0015_S_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J0016-0015_S_1997_05_07_yyk_uvs.fits wwins J0016-0015_S_1997_05_07_yyk\_map.win ! wwins: Wrote 4 windows to J0016-0015_S_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000480188 Jy ! Component: 100 - total flux cleaned = 0.000823576 Jy ! Component: 150 - total flux cleaned = 0.000982096 Jy ! Component: 200 - total flux cleaned = 0.00123893 Jy ! Component: 250 - total flux cleaned = 0.00133942 Jy ! Component: 300 - total flux cleaned = 0.00153292 Jy ! Component: 350 - total flux cleaned = 0.00157956 Jy ! Component: 400 - total flux cleaned = 0.00157924 Jy ! Component: 450 - total flux cleaned = 0.00153467 Jy ! Component: 500 - total flux cleaned = 0.00153466 Jy ! Component: 550 - total flux cleaned = 0.00153418 Jy ! Component: 600 - total flux cleaned = 0.00149263 Jy ! Component: 650 - total flux cleaned = 0.00145197 Jy ! Component: 700 - total flux cleaned = 0.0014513 Jy ! Component: 750 - total flux cleaned = 0.00125832 Jy ! Component: 800 - total flux cleaned = 0.00114548 Jy ! Component: 850 - total flux cleaned = 0.00103399 Jy ! Component: 900 - total flux cleaned = 0.000924672 Jy ! Component: 950 - total flux cleaned = 0.000818228 Jy ! Component: 1000 - total flux cleaned = 0.000782797 Jy ! Component: 1050 - total flux cleaned = 0.000611066 Jy ! Component: 1100 - total flux cleaned = 0.00050996 Jy ! Component: 1150 - total flux cleaned = 0.000444348 Jy ! Component: 1200 - total flux cleaned = 0.00034678 Jy ! Component: 1250 - total flux cleaned = 0.000314825 Jy ! Component: 1300 - total flux cleaned = 0.00025239 Jy ! Component: 1350 - total flux cleaned = 0.000221532 Jy ! Component: 1400 - total flux cleaned = 0.000312125 Jy ! Component: 1450 - total flux cleaned = 0.000311183 Jy ! Component: 1500 - total flux cleaned = 0.00031125 Jy ! Component: 1550 - total flux cleaned = 0.000310919 Jy ! Component: 1600 - total flux cleaned = 0.000368275 Jy ! Component: 1650 - total flux cleaned = 0.000453534 Jy ! Component: 1700 - total flux cleaned = 0.000537147 Jy ! Component: 1750 - total flux cleaned = 0.000564706 Jy ! Component: 1800 - total flux cleaned = 0.000673322 Jy ! Component: 1850 - total flux cleaned = 0.000620082 Jy ! Component: 1900 - total flux cleaned = 0.000673428 Jy ! Component: 1950 - total flux cleaned = 0.000699925 Jy ! Component: 2000 - total flux cleaned = 0.000725347 Jy ! Total flux subtracted in 2048 components = 0.000648739 Jy ! Clean residual min=-0.001360 max=0.001379 Jy/beam ! Clean residual mean=0.000008 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.967106 Jy keep ! Adding 124 model components to the UV plane model. ! The established model now contains 320 components and 0.967106 Jy ![Exited script file: muppet] wmap "J0016-0015_S_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.458 x 8.33 at -3.749 degrees (North through East) ! Clean map min=-0.0036529 max=0.82053 Jy/beam ! Writing clean map to FITS file: J0016-0015_S_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.820526 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000524407 device "J0016-0015_S_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J0016-0015_S_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.191733 0.191733 0.383466 0.766932 1.53386 3.06773 6.13546 12.2709 24.5418 49.0837 98.1673 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.82 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.458 x 8.33 at -3.749 degrees (North through East) ! Clean map min=-0.0036529 max=0.82053 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0016-0015_S_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J0016-0015_S_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0016-0015_S_1997_05_07_yyk_uvs.log closed on Sun Jan 7 15:18:24 2007