! Started logfile: J0008-2559_X_1997_07_02_yyk_uvs.log on Mon Jan 8 01:35:37 2007 obs J0008-2559_X_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J0008-2559_X_1997_07_02_yyk_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1.12451 visibilities/baseline/integration-bin. ! Found source: J0008-2559 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 753 lines of history. ! ! Reading 29552 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0008-2559_X_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.570607 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7354 mas, bmaj=2.005 mas, bpa=-12.17 degrees ! Estimated noise=1000.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -0.2). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.118949 Jy ! Component: 100 - total flux cleaned = 0.159666 Jy ! Total flux subtracted in 100 components = 0.159666 Jy ! Clean residual min=-0.015396 max=0.017305 Jy/beam ! Clean residual mean=-0.000186 rms=0.004036 Jy/beam ! Combined flux in latest and established models = 0.159666 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.159666 Jy ! ! Correcting IF 1. ! A total of 333 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 333 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 333 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 333 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.551900Jy sigma=0.002174 ! Fit after self-cal, rms=0.551393Jy sigma=0.002172 ! Inverting map and beam ! Estimated beam: bmin=0.7354 mas, bmaj=2.005 mas, bpa=-12.17 degrees ! Estimated noise=1000.56 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8938 mas, bmaj=2.377 mas, bpa=-12.3 degrees ! Estimated noise=666.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0365552 Jy ! Component: 100 - total flux cleaned = 0.0513278 Jy ! Component: 150 - total flux cleaned = 0.0580811 Jy ! Component: 200 - total flux cleaned = 0.0612682 Jy ! Total flux subtracted in 200 components = 0.0612682 Jy ! Clean residual min=-0.008321 max=0.007780 Jy/beam ! Clean residual mean=-0.000361 rms=0.002152 Jy/beam ! Combined flux in latest and established models = 0.220935 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 43 components and 0.220935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.550930Jy sigma=0.002145 ! Fit after self-cal, rms=0.550918Jy sigma=0.002145 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8938 x 2.377 at -12.3 degrees (North through East) ! Clean map min=-0.0080097 max=0.12945 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01876 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 1.06 KP 0.91 ! LA 0.98 MK 0.89 NL 1.01 OV 1.01 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.550918Jy sigma=0.002145 ! Fit after self-cal, rms=0.551624Jy sigma=0.002145 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.551624Jy sigma=0.002145 ! Fit after self-cal, rms=0.551624Jy sigma=0.002145 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8898 mas, bmaj=2.374 mas, bpa=-12.8 degrees ! Estimated noise=663.943 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00070893 Jy ! Component: 100 - total flux cleaned = 0.00100038 Jy ! Component: 150 - total flux cleaned = 0.00124125 Jy ! Component: 200 - total flux cleaned = 0.00141597 Jy ! Total flux subtracted in 200 components = 0.00141597 Jy ! Clean residual min=-0.008017 max=0.007536 Jy/beam ! Clean residual mean=-0.000360 rms=0.002039 Jy/beam ! Combined flux in latest and established models = 0.222351 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.222351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.551612Jy sigma=0.002145 ! Fit after self-cal, rms=0.551612Jy sigma=0.002145 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.551612Jy sigma=0.002145 ! Fit after self-cal, rms=0.550178Jy sigma=0.002128 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324948 Jy ! Component: 100 - total flux cleaned = 0.00419101 Jy ! Component: 150 - total flux cleaned = 0.00421502 Jy ! Component: 200 - total flux cleaned = 0.00421452 Jy ! Total flux subtracted in 200 components = 0.00421452 Jy ! Clean residual min=-0.007260 max=0.007155 Jy/beam ! Clean residual mean=-0.000295 rms=0.001900 Jy/beam ! Combined flux in latest and established models = 0.226565 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.226565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.550241Jy sigma=0.002127 ! Fit after self-cal, rms=0.550037Jy sigma=0.002125 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8898 x 2.374 at -12.8 degrees (North through East) ! Clean map min=-0.0068472 max=0.13109 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.550037Jy sigma=0.002125 ! Fit after self-cal, rms=0.548097Jy sigma=0.002122 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.548097Jy sigma=0.002122 ! Fit after self-cal, rms=0.548013Jy sigma=0.002122 ! Inverting map and beam ! Estimated beam: bmin=0.8675 mas, bmaj=2.348 mas, bpa=-13.15 degrees ! Estimated noise=632.312 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00458323 Jy ! Component: 100 - total flux cleaned = -0.00572838 Jy ! Component: 150 - total flux cleaned = -0.00577315 Jy ! Component: 200 - total flux cleaned = -0.00579171 Jy ! Total flux subtracted in 200 components = -0.00579171 Jy ! Clean residual min=-0.006302 max=0.005651 Jy/beam ! Clean residual mean=-0.000221 rms=0.001582 Jy/beam ! Combined flux in latest and established models = 0.220774 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 62 components and 0.220774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.547913Jy sigma=0.002121 ! Fit after self-cal, rms=0.547830Jy sigma=0.002121 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.547830Jy sigma=0.002121 ! Fit after self-cal, rms=0.546016Jy sigma=0.002120 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.546016Jy sigma=0.002120 ! Fit after self-cal, rms=0.545937Jy sigma=0.002120 ! Inverting map and beam ! Estimated beam: bmin=0.8502 mas, bmaj=2.33 mas, bpa=-14.01 degrees ! Estimated noise=608.208 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00412772 Jy ! Component: 100 - total flux cleaned = -0.00522685 Jy ! Component: 150 - total flux cleaned = -0.00537177 Jy ! Component: 200 - total flux cleaned = -0.00548198 Jy ! Total flux subtracted in 200 components = -0.00548198 Jy ! Clean residual min=-0.005880 max=0.005276 Jy/beam ! Clean residual mean=-0.000192 rms=0.001475 Jy/beam ! Combined flux in latest and established models = 0.215292 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 67 components and 0.215292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.545846Jy sigma=0.002120 ! Fit after self-cal, rms=0.545788Jy sigma=0.002120 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.209 mas, bmaj=5.394 mas, bpa=-9.768 degrees ! Estimated noise=808.208 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106644 Jy ! Component: 100 - total flux cleaned = 0.000136372 Jy ! Component: 150 - total flux cleaned = 0.00016356 Jy ! Component: 200 - total flux cleaned = 0.0001884 Jy ! Total flux subtracted in 200 components = 0.0001884 Jy ! Clean residual min=-0.007826 max=0.007532 Jy/beam ! Clean residual mean=-0.000410 rms=0.002357 Jy/beam ! Combined flux in latest and established models = 0.21548 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 69 components and 0.21548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.545780Jy sigma=0.002120 ! Fit after self-cal, rms=0.545739Jy sigma=0.002120 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7186 mas, bmaj=1.995 mas, bpa=-13 degrees ! Estimated noise=913.007 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.114378 Jy ! Component: 100 - total flux cleaned = 0.154883 Jy ! Component: 150 - total flux cleaned = 0.174745 Jy ! Component: 200 - total flux cleaned = 0.186147 Jy ! Total flux subtracted in 200 components = 0.186147 Jy ! Clean residual min=-0.010222 max=0.010329 Jy/beam ! Clean residual mean=-0.000144 rms=0.002622 Jy/beam ! Combined flux in latest and established models = 0.186147 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.186147 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8502 mas, bmaj=2.33 mas, bpa=-14.01 degrees ! Estimated noise=608.208 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.01585 Jy ! Component: 100 - total flux cleaned = 0.0225265 Jy ! Component: 150 - total flux cleaned = 0.0257464 Jy ! Component: 200 - total flux cleaned = 0.0273235 Jy ! Total flux subtracted in 200 components = 0.0273235 Jy ! Clean residual min=-0.005874 max=0.005133 Jy/beam ! Clean residual mean=-0.000195 rms=0.001489 Jy/beam ! Combined flux in latest and established models = 0.21347 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 49 components and 0.21347 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.209 mas, bmaj=5.394 mas, bpa=-9.768 degrees ! Estimated noise=808.208 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136114 Jy ! Component: 100 - total flux cleaned = 0.00139612 Jy ! Component: 150 - total flux cleaned = 0.00142692 Jy ! Component: 200 - total flux cleaned = 0.00145559 Jy ! Total flux subtracted in 200 components = 0.00145559 Jy ! Clean residual min=-0.007634 max=0.007486 Jy/beam ! Clean residual mean=-0.000415 rms=0.002362 Jy/beam ! Combined flux in latest and established models = 0.214926 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 51 components and 0.214926 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8502 mas, bmaj=2.33 mas, bpa=-14.01 degrees ! Estimated noise=608.208 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000299667 Jy ! Component: 100 - total flux cleaned = -0.000336799 Jy ! Component: 150 - total flux cleaned = -0.000309511 Jy ! Component: 200 - total flux cleaned = -0.000263969 Jy ! Total flux subtracted in 200 components = -0.000263969 Jy ! Clean residual min=-0.005868 max=0.005213 Jy/beam ! Clean residual mean=-0.000193 rms=0.001475 Jy/beam ! Combined flux in latest and established models = 0.214662 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 56 components and 0.214662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.545759Jy sigma=0.002120 ! Fit after self-cal, rms=0.545840Jy sigma=0.002120 wmodel J0008-2559_X_1997_07_02_yyk\_map.mod ! Writing 56 model components to file: J0008-2559_X_1997_07_02_yyk_map.mod wobs J0008-2559_X_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J0008-2559_X_1997_07_02_yyk_uvs.fits wwins J0008-2559_X_1997_07_02_yyk\_map.win ! wwins: Wrote 1 windows to J0008-2559_X_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00166732 Jy ! Component: 100 - total flux cleaned = -0.00322808 Jy ! Component: 150 - total flux cleaned = -0.00460092 Jy ! Component: 200 - total flux cleaned = -0.00622951 Jy ! Component: 250 - total flux cleaned = -0.00779371 Jy ! Component: 300 - total flux cleaned = -0.00923302 Jy ! Component: 350 - total flux cleaned = -0.0106993 Jy ! Component: 400 - total flux cleaned = -0.0118376 Jy ! Component: 450 - total flux cleaned = -0.012947 Jy ! Component: 500 - total flux cleaned = -0.0141 Jy ! Component: 550 - total flux cleaned = -0.0154247 Jy ! Component: 600 - total flux cleaned = -0.0165245 Jy ! Component: 650 - total flux cleaned = -0.0177271 Jy ! Component: 700 - total flux cleaned = -0.0187162 Jy ! Component: 750 - total flux cleaned = -0.019565 Jy ! Component: 800 - total flux cleaned = -0.0203987 Jy ! Component: 850 - total flux cleaned = -0.02116 Jy ! Component: 900 - total flux cleaned = -0.0219661 Jy ! Component: 950 - total flux cleaned = -0.022815 Jy ! Component: 1000 - total flux cleaned = -0.0234833 Jy ! Component: 1050 - total flux cleaned = -0.0242509 Jy ! Component: 1100 - total flux cleaned = -0.0248447 Jy ! Component: 1150 - total flux cleaned = -0.025644 Jy ! Component: 1200 - total flux cleaned = -0.0263262 Jy ! Component: 1250 - total flux cleaned = -0.0268437 Jy ! Component: 1300 - total flux cleaned = -0.0274059 Jy ! Component: 1350 - total flux cleaned = -0.0281113 Jy ! Component: 1400 - total flux cleaned = -0.0287083 Jy ! Component: 1450 - total flux cleaned = -0.0291997 Jy ! Component: 1500 - total flux cleaned = -0.0297339 Jy ! Component: 1550 - total flux cleaned = -0.030357 Jy ! Component: 1600 - total flux cleaned = -0.0307835 Jy ! Component: 1650 - total flux cleaned = -0.0312522 Jy ! Component: 1700 - total flux cleaned = -0.0318077 Jy ! Component: 1750 - total flux cleaned = -0.0324025 Jy ! Component: 1800 - total flux cleaned = -0.0328547 Jy ! Component: 1850 - total flux cleaned = -0.0332574 Jy ! Component: 1900 - total flux cleaned = -0.0337003 Jy ! Component: 1950 - total flux cleaned = -0.0341386 Jy ! Component: 2000 - total flux cleaned = -0.0344425 Jy ! Total flux subtracted in 2048 components = -0.0348302 Jy ! Clean residual min=-0.002245 max=0.002186 Jy/beam ! Clean residual mean=-0.000135 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.179832 Jy keep ! Adding 155 model components to the UV plane model. ! The established model now contains 211 components and 0.179832 Jy ![Exited script file: muppet] wmap "J0008-2559_X_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8502 x 2.33 at -14.01 degrees (North through East) ! Clean map min=-0.0051042 max=0.1186 Jy/beam ! Writing clean map to FITS file: J0008-2559_X_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.118604 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000891706 device "J0008-2559_X_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J0008-2559_X_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.2555 2.2555 4.511 9.02201 18.044 36.088 72.1761 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.118 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8502 x 2.33 at -14.01 degrees (North through East) ! Clean map min=-0.0051042 max=0.1186 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0008-2559_X_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J0008-2559_X_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0008-2559_X_1997_07_02_yyk_uvs.log closed on Mon Jan 8 01:35:45 2007