! Started logfile: J0003-1927_X_1997_07_02_yyk_uvs.log on Mon Jan 8 01:33:04 2007 obs J0003-1927_X_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J0003-1927_X_1997_07_02_yyk_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1.21019 visibilities/baseline/integration-bin. ! Found source: J0003-1927 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 753 lines of history. ! ! Reading 31368 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0003-1927_X_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.258045 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7393 mas, bmaj=2.002 mas, bpa=-9.613 degrees ! Estimated noise=1021.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.115067 Jy ! Component: 100 - total flux cleaned = 0.148932 Jy ! Total flux subtracted in 100 components = 0.148932 Jy ! Clean residual min=-0.008868 max=0.013542 Jy/beam ! Clean residual mean=-0.000024 rms=0.002605 Jy/beam ! Combined flux in latest and established models = 0.148932 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.148932 Jy ! ! Correcting IF 1. ! A total of 230 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 230 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 230 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 230 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.213671Jy sigma=0.001618 ! Fit after self-cal, rms=0.212913Jy sigma=0.001615 ! Inverting map and beam ! Estimated beam: bmin=0.7393 mas, bmaj=2.002 mas, bpa=-9.613 degrees ! Estimated noise=1021.97 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9217 mas, bmaj=2.363 mas, bpa=-10.87 degrees ! Estimated noise=620.181 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, 0.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0298513 Jy ! Component: 100 - total flux cleaned = 0.0441574 Jy ! Component: 150 - total flux cleaned = 0.052496 Jy ! Component: 200 - total flux cleaned = 0.0575891 Jy ! Total flux subtracted in 200 components = 0.0575891 Jy ! Clean residual min=-0.004454 max=0.005655 Jy/beam ! Clean residual mean=-0.000029 rms=0.001352 Jy/beam ! Combined flux in latest and established models = 0.206521 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 67 model components to the UV plane model. ! The established model now contains 69 components and 0.206521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210798Jy sigma=0.001588 ! Fit after self-cal, rms=0.210733Jy sigma=0.001587 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9217 x 2.363 at -10.87 degrees (North through East) ! Clean map min=-0.0041593 max=0.1349 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01522 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 HN 0.99 KP 0.98 ! LA 1.00 MK 1.04 NL 1.01 OV 0.98 ! PT 0.94 SC 0.90 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00855 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.02 KP 1.01 ! LA 0.98 MK 0.95 NL 1.08 OV 0.99 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.990939 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 1.00 KP 1.00 ! LA 1.01 MK 1.04 NL 1.01 OV 0.99 ! PT 0.97 SC 1.06 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.210733Jy sigma=0.001587 ! Fit after self-cal, rms=0.210958Jy sigma=0.001586 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210958Jy sigma=0.001586 ! Fit after self-cal, rms=0.210959Jy sigma=0.001586 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9272 mas, bmaj=2.366 mas, bpa=-10.41 degrees ! Estimated noise=618.266 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00302355 Jy ! Component: 100 - total flux cleaned = 0.00321061 Jy ! Component: 150 - total flux cleaned = 0.00321519 Jy ! Component: 200 - total flux cleaned = 0.00321008 Jy ! Total flux subtracted in 200 components = 0.00321008 Jy ! Clean residual min=-0.003862 max=0.004067 Jy/beam ! Clean residual mean=0.000006 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.209731 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 84 components and 0.209731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210891Jy sigma=0.001586 ! Fit after self-cal, rms=0.210887Jy sigma=0.001586 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210887Jy sigma=0.001586 ! Fit after self-cal, rms=0.207617Jy sigma=0.001564 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188247 Jy ! Component: 100 - total flux cleaned = 0.00222431 Jy ! Component: 150 - total flux cleaned = 0.00228564 Jy ! Component: 200 - total flux cleaned = 0.00233837 Jy ! Total flux subtracted in 200 components = 0.00233837 Jy ! Clean residual min=-0.003259 max=0.004176 Jy/beam ! Clean residual mean=0.000008 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.21207 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 96 components and 0.21207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207614Jy sigma=0.001563 ! Fit after self-cal, rms=0.207256Jy sigma=0.001561 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9272 x 2.366 at -10.41 degrees (North through East) ! Clean map min=-0.0030703 max=0.13629 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207256Jy sigma=0.001561 ! Fit after self-cal, rms=0.205539Jy sigma=0.001559 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205539Jy sigma=0.001559 ! Fit after self-cal, rms=0.205457Jy sigma=0.001559 ! Inverting map and beam ! Estimated beam: bmin=0.9335 mas, bmaj=2.376 mas, bpa=-10.35 degrees ! Estimated noise=608.768 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000761216 Jy ! Component: 100 - total flux cleaned = -0.000995014 Jy ! Component: 150 - total flux cleaned = -0.00114005 Jy ! Component: 200 - total flux cleaned = -0.00130523 Jy ! Total flux subtracted in 200 components = -0.00130523 Jy ! Clean residual min=-0.003226 max=0.003573 Jy/beam ! Clean residual mean=0.000005 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.210764 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 105 components and 0.210764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205406Jy sigma=0.001559 ! Fit after self-cal, rms=0.205378Jy sigma=0.001559 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205378Jy sigma=0.001559 ! Fit after self-cal, rms=0.206506Jy sigma=0.001557 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206506Jy sigma=0.001557 ! Fit after self-cal, rms=0.206497Jy sigma=0.001557 ! Inverting map and beam ! Estimated beam: bmin=0.9347 mas, bmaj=2.378 mas, bpa=-10.34 degrees ! Estimated noise=605.812 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000351107 Jy ! Component: 100 - total flux cleaned = -0.000522956 Jy ! Component: 150 - total flux cleaned = -0.000669569 Jy ! Component: 200 - total flux cleaned = -0.000764897 Jy ! Total flux subtracted in 200 components = -0.000764897 Jy ! Clean residual min=-0.003157 max=0.003333 Jy/beam ! Clean residual mean=0.000003 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.209999 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 110 components and 0.209999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206472Jy sigma=0.001557 ! Fit after self-cal, rms=0.206468Jy sigma=0.001557 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.217 mas, bmaj=4.675 mas, bpa=-9.926 degrees ! Estimated noise=771.194 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -1.17963e-05 Jy ! Component: 100 - total flux cleaned = -0.000226142 Jy ! Component: 150 - total flux cleaned = -0.000316764 Jy ! Component: 200 - total flux cleaned = -0.000394285 Jy ! Total flux subtracted in 200 components = -0.000394285 Jy ! Clean residual min=-0.003446 max=0.003179 Jy/beam ! Clean residual mean=0.000014 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.209605 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 119 components and 0.209605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206464Jy sigma=0.001557 ! Fit after self-cal, rms=0.206461Jy sigma=0.001557 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7446 mas, bmaj=2.008 mas, bpa=-9.374 degrees ! Estimated noise=1004.07 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.117058 Jy ! Component: 100 - total flux cleaned = 0.152873 Jy ! Component: 150 - total flux cleaned = 0.171243 Jy ! Component: 200 - total flux cleaned = 0.182821 Jy ! Total flux subtracted in 200 components = 0.182821 Jy ! Clean residual min=-0.005980 max=0.006221 Jy/beam ! Clean residual mean=-0.000005 rms=0.001630 Jy/beam ! Combined flux in latest and established models = 0.182821 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.182821 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9347 mas, bmaj=2.378 mas, bpa=-10.34 degrees ! Estimated noise=605.812 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132536 Jy ! Component: 100 - total flux cleaned = 0.0201496 Jy ! Component: 150 - total flux cleaned = 0.0241579 Jy ! Component: 200 - total flux cleaned = 0.0256309 Jy ! Total flux subtracted in 200 components = 0.0256309 Jy ! Clean residual min=-0.003727 max=0.003390 Jy/beam ! Clean residual mean=0.000001 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.208452 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 65 components and 0.208452 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.217 mas, bmaj=4.675 mas, bpa=-9.926 degrees ! Estimated noise=771.194 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143279 Jy ! Component: 100 - total flux cleaned = 0.00144342 Jy ! Component: 150 - total flux cleaned = 0.00133172 Jy ! Component: 200 - total flux cleaned = 0.00118544 Jy ! Total flux subtracted in 200 components = 0.00118544 Jy ! Clean residual min=-0.003751 max=0.003282 Jy/beam ! Clean residual mean=0.000012 rms=0.000936 Jy/beam ! Combined flux in latest and established models = 0.209638 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 81 components and 0.209638 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9347 mas, bmaj=2.378 mas, bpa=-10.34 degrees ! Estimated noise=605.812 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000160985 Jy ! Component: 100 - total flux cleaned = -0.000265644 Jy ! Component: 150 - total flux cleaned = -0.00026677 Jy ! Component: 200 - total flux cleaned = -0.000309921 Jy ! Total flux subtracted in 200 components = -0.000309921 Jy ! Clean residual min=-0.003345 max=0.003276 Jy/beam ! Clean residual mean=0.000002 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.209328 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 95 components and 0.209328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206480Jy sigma=0.001557 ! Fit after self-cal, rms=0.206475Jy sigma=0.001557 wmodel J0003-1927_X_1997_07_02_yyk\_map.mod ! Writing 95 model components to file: J0003-1927_X_1997_07_02_yyk_map.mod wobs J0003-1927_X_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J0003-1927_X_1997_07_02_yyk_uvs.fits wwins J0003-1927_X_1997_07_02_yyk\_map.win ! wwins: Wrote 2 windows to J0003-1927_X_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.90794e-06 Jy ! Component: 100 - total flux cleaned = -6.25479e-05 Jy ! Component: 150 - total flux cleaned = -6.37083e-05 Jy ! Component: 200 - total flux cleaned = -0.000156075 Jy ! Component: 250 - total flux cleaned = -0.000287005 Jy ! Component: 300 - total flux cleaned = -0.000495598 Jy ! Component: 350 - total flux cleaned = -0.000576485 Jy ! Component: 400 - total flux cleaned = -0.000810638 Jy ! Component: 450 - total flux cleaned = -0.000923612 Jy ! Component: 500 - total flux cleaned = -0.00103365 Jy ! Component: 550 - total flux cleaned = -0.00114065 Jy ! Component: 600 - total flux cleaned = -0.00117532 Jy ! Component: 650 - total flux cleaned = -0.00124387 Jy ! Component: 700 - total flux cleaned = -0.00137743 Jy ! Component: 750 - total flux cleaned = -0.00150785 Jy ! Component: 800 - total flux cleaned = -0.00160478 Jy ! Component: 850 - total flux cleaned = -0.00173103 Jy ! Component: 900 - total flux cleaned = -0.00191546 Jy ! Component: 950 - total flux cleaned = -0.00206634 Jy ! Component: 1000 - total flux cleaned = -0.00224433 Jy ! Component: 1050 - total flux cleaned = -0.00236151 Jy ! Component: 1100 - total flux cleaned = -0.00261976 Jy ! Component: 1150 - total flux cleaned = -0.0027889 Jy ! Component: 1200 - total flux cleaned = -0.00303856 Jy ! Component: 1250 - total flux cleaned = -0.00322907 Jy ! Component: 1300 - total flux cleaned = -0.00344369 Jy ! Component: 1350 - total flux cleaned = -0.00365487 Jy ! Component: 1400 - total flux cleaned = -0.00381126 Jy ! Component: 1450 - total flux cleaned = -0.00404215 Jy ! Component: 1500 - total flux cleaned = -0.00416826 Jy ! Component: 1550 - total flux cleaned = -0.00441749 Jy ! Component: 1600 - total flux cleaned = -0.00458927 Jy ! Component: 1650 - total flux cleaned = -0.00471095 Jy ! Component: 1700 - total flux cleaned = -0.00483109 Jy ! Component: 1750 - total flux cleaned = -0.00492597 Jy ! Component: 1800 - total flux cleaned = -0.00504328 Jy ! Component: 1850 - total flux cleaned = -0.00513567 Jy ! Component: 1900 - total flux cleaned = -0.00518168 Jy ! Component: 1950 - total flux cleaned = -0.00529488 Jy ! Component: 2000 - total flux cleaned = -0.0053393 Jy ! Total flux subtracted in 2048 components = -0.00545005 Jy ! Clean residual min=-0.001333 max=0.001267 Jy/beam ! Clean residual mean=-0.000003 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.203878 Jy keep ! Adding 143 model components to the UV plane model. ! The established model now contains 238 components and 0.203878 Jy ![Exited script file: muppet] wmap "J0003-1927_X_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9347 x 2.378 at -10.34 degrees (North through East) ! Clean map min=-0.0025522 max=0.13514 Jy/beam ! Writing clean map to FITS file: J0003-1927_X_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.135138 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000415767 device "J0003-1927_X_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J0003-1927_X_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.922987 0.922987 1.84597 3.69195 7.38389 14.7678 29.5356 59.0712 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.135 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9347 x 2.378 at -10.34 degrees (North through East) ! Clean map min=-0.0025522 max=0.13514 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0003-1927_X_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J0003-1927_X_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0003-1927_X_1997_07_02_yyk_uvs.log closed on Mon Jan 8 01:33:13 2007