! Started logfile: J0003-1149_S_1997_05_07_yyk_uvs.log on Sun Jan 7 15:13:50 2007 obs J0003-1149_S_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J0003-1149_S_1997_05_07_yyk_uva.fits ! AN table 1: 153 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.9878 visibilities/baseline/integration-bin. ! Found source: J0003-1149 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 614 lines of history. ! ! Reading 27204 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0003-1149_S_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.455466 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.782 mas, bmaj=7.055 mas, bpa=-4 degrees ! Estimated noise=1698.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.278092 Jy ! Component: 100 - total flux cleaned = 0.352684 Jy ! Total flux subtracted in 100 components = 0.352684 Jy ! Clean residual min=-0.013145 max=0.023820 Jy/beam ! Clean residual mean=0.000255 rms=0.004106 Jy/beam ! Combined flux in latest and established models = 0.352684 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.352684 Jy ! ! Correcting IF 1. ! A total of 167 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.302967Jy sigma=0.001216 ! Fit after self-cal, rms=0.302606Jy sigma=0.001215 ! Inverting map and beam ! Estimated beam: bmin=2.782 mas, bmaj=7.055 mas, bpa=-4 degrees ! Estimated noise=1698.96 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.511 mas, bmaj=8.777 mas, bpa=-5.623 degrees ! Estimated noise=998.588 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0372631 Jy ! Component: 100 - total flux cleaned = 0.0503578 Jy ! Component: 150 - total flux cleaned = 0.0520434 Jy ! Component: 200 - total flux cleaned = 0.0522717 Jy ! Total flux subtracted in 200 components = 0.0522717 Jy ! Clean residual min=-0.008209 max=0.012358 Jy/beam ! Clean residual mean=0.000292 rms=0.003463 Jy/beam ! Combined flux in latest and established models = 0.404956 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 23 components and 0.404956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298932Jy sigma=0.001201 ! Fit after self-cal, rms=0.298894Jy sigma=0.001201 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.511 x 8.777 at -5.623 degrees (North through East) ! Clean map min=-0.0078647 max=0.32181 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02778 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.06 HN 1.01 KP 0.89 ! LA 0.96 MK 1.00 NL 1.00* OV 1.11 ! PT 0.93 SC 0.81 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.972269 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.14 HN 1.09 KP 1.02 ! LA 1.07 MK 1.00 NL 1.04 OV 1.04 ! PT 0.95 SC 0.92 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.05989 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.07 HN 0.99 KP 0.88 ! LA 0.79 MK 0.85 NL 0.96 OV 0.93 ! PT 1.02 SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.996052 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.11 HN 1.09 KP 0.92 ! LA 0.86 MK 1.00 NL 1.08 OV 1.09 ! PT 0.90 SC 1.00 ! ! ! Fit before self-cal, rms=0.298894Jy sigma=0.001201 ! Fit after self-cal, rms=0.291099Jy sigma=0.001190 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291099Jy sigma=0.001190 ! Fit after self-cal, rms=0.291097Jy sigma=0.001190 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.456 mas, bmaj=8.533 mas, bpa=-4.751 degrees ! Estimated noise=1004.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, 1.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112411 Jy ! Component: 100 - total flux cleaned = 0.0131162 Jy ! Component: 150 - total flux cleaned = 0.0139004 Jy ! Component: 200 - total flux cleaned = 0.0143971 Jy ! Total flux subtracted in 200 components = 0.0143971 Jy ! Clean residual min=-0.004732 max=0.005176 Jy/beam ! Clean residual mean=0.000068 rms=0.001506 Jy/beam ! Combined flux in latest and established models = 0.419353 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 49 components and 0.419353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.290614Jy sigma=0.001188 ! Fit after self-cal, rms=0.290573Jy sigma=0.001188 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.290573Jy sigma=0.001188 ! Fit after self-cal, rms=0.289494Jy sigma=0.001183 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00291476 Jy ! Component: 100 - total flux cleaned = 0.0034324 Jy ! Component: 150 - total flux cleaned = 0.00354644 Jy ! Component: 200 - total flux cleaned = 0.00375614 Jy ! Total flux subtracted in 200 components = 0.00375614 Jy ! Clean residual min=-0.004437 max=0.005112 Jy/beam ! Clean residual mean=0.000053 rms=0.001446 Jy/beam ! Combined flux in latest and established models = 0.423109 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 65 components and 0.423109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289383Jy sigma=0.001183 ! Fit after self-cal, rms=0.289249Jy sigma=0.001182 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.456 x 8.533 at -4.751 degrees (North through East) ! Clean map min=-0.0057177 max=0.32475 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289249Jy sigma=0.001182 ! Fit after self-cal, rms=0.281487Jy sigma=0.001177 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281487Jy sigma=0.001177 ! Fit after self-cal, rms=0.281464Jy sigma=0.001177 ! Inverting map and beam ! Estimated beam: bmin=3.424 mas, bmaj=8.465 mas, bpa=-4.464 degrees ! Estimated noise=993.891 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161458 Jy ! Component: 100 - total flux cleaned = 0.00160575 Jy ! Component: 150 - total flux cleaned = 0.00167951 Jy ! Component: 200 - total flux cleaned = 0.00168093 Jy ! Total flux subtracted in 200 components = 0.00168093 Jy ! Clean residual min=-0.004406 max=0.004789 Jy/beam ! Clean residual mean=0.000063 rms=0.001308 Jy/beam ! Combined flux in latest and established models = 0.42479 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 77 components and 0.42479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281412Jy sigma=0.001177 ! Fit after self-cal, rms=0.281407Jy sigma=0.001177 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281407Jy sigma=0.001177 ! Fit after self-cal, rms=0.281566Jy sigma=0.001176 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281566Jy sigma=0.001176 ! Fit after self-cal, rms=0.281570Jy sigma=0.001176 ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=8.46 mas, bpa=-4.394 degrees ! Estimated noise=994.001 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000981844 Jy ! Component: 100 - total flux cleaned = 0.00111472 Jy ! Component: 150 - total flux cleaned = 0.00117029 Jy ! Component: 200 - total flux cleaned = 0.00116864 Jy ! Total flux subtracted in 200 components = 0.00116864 Jy ! Clean residual min=-0.004377 max=0.004694 Jy/beam ! Clean residual mean=0.000063 rms=0.001282 Jy/beam ! Combined flux in latest and established models = 0.425959 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 85 components and 0.425959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281544Jy sigma=0.001175 ! Fit after self-cal, rms=0.281545Jy sigma=0.001176 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.062 mas, bmaj=14.62 mas, bpa=0.03619 degrees ! Estimated noise=1250.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000934475 Jy ! Component: 100 - total flux cleaned = 0.00112446 Jy ! Component: 150 - total flux cleaned = 0.00122246 Jy ! Component: 200 - total flux cleaned = 0.00130625 Jy ! Total flux subtracted in 200 components = 0.00130625 Jy ! Clean residual min=-0.006162 max=0.006095 Jy/beam ! Clean residual mean=0.000108 rms=0.001830 Jy/beam ! Combined flux in latest and established models = 0.427265 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 98 components and 0.427265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281537Jy sigma=0.001175 ! Fit after self-cal, rms=0.281536Jy sigma=0.001175 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.732 mas, bmaj=6.915 mas, bpa=-3.284 degrees ! Estimated noise=1676.56 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.277938 Jy ! Component: 100 - total flux cleaned = 0.356392 Jy ! Component: 150 - total flux cleaned = 0.389466 Jy ! Component: 200 - total flux cleaned = 0.406137 Jy ! Total flux subtracted in 200 components = 0.406137 Jy ! Clean residual min=-0.008144 max=0.008156 Jy/beam ! Clean residual mean=0.000064 rms=0.002006 Jy/beam ! Combined flux in latest and established models = 0.406137 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.406137 Jy ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=8.46 mas, bpa=-4.394 degrees ! Estimated noise=994.001 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121354 Jy ! Component: 100 - total flux cleaned = 0.0158028 Jy ! Component: 150 - total flux cleaned = 0.0167737 Jy ! Component: 200 - total flux cleaned = 0.0172803 Jy ! Total flux subtracted in 200 components = 0.0172803 Jy ! Clean residual min=-0.004490 max=0.005943 Jy/beam ! Clean residual mean=0.000073 rms=0.001411 Jy/beam ! Combined flux in latest and established models = 0.423417 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 48 components and 0.423417 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.062 mas, bmaj=14.62 mas, bpa=0.03619 degrees ! Estimated noise=1250.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264374 Jy ! Component: 100 - total flux cleaned = 0.00320279 Jy ! Component: 150 - total flux cleaned = 0.00337478 Jy ! Component: 200 - total flux cleaned = 0.00352859 Jy ! Total flux subtracted in 200 components = 0.00352859 Jy ! Clean residual min=-0.006076 max=0.006180 Jy/beam ! Clean residual mean=0.000111 rms=0.001877 Jy/beam ! Combined flux in latest and established models = 0.426946 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 70 components and 0.426946 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=8.46 mas, bpa=-4.394 degrees ! Estimated noise=994.001 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110686 Jy ! Component: 100 - total flux cleaned = -0.000895977 Jy ! Component: 150 - total flux cleaned = -0.000711195 Jy ! Component: 200 - total flux cleaned = -0.000468858 Jy ! Total flux subtracted in 200 components = -0.000468858 Jy ! Clean residual min=-0.004316 max=0.005099 Jy/beam ! Clean residual mean=0.000060 rms=0.001279 Jy/beam ! Combined flux in latest and established models = 0.426477 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 88 components and 0.426477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281566Jy sigma=0.001176 ! Fit after self-cal, rms=0.281564Jy sigma=0.001176 wmodel J0003-1149_S_1997_05_07_yyk\_map.mod ! Writing 88 model components to file: J0003-1149_S_1997_05_07_yyk_map.mod wobs J0003-1149_S_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J0003-1149_S_1997_05_07_yyk_uvs.fits wwins J0003-1149_S_1997_05_07_yyk\_map.win ! wwins: Wrote 2 windows to J0003-1149_S_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179362 Jy ! Component: 100 - total flux cleaned = 0.00271943 Jy ! Component: 150 - total flux cleaned = 0.00348929 Jy ! Component: 200 - total flux cleaned = 0.00421206 Jy ! Component: 250 - total flux cleaned = 0.00477531 Jy ! Component: 300 - total flux cleaned = 0.00507396 Jy ! Component: 350 - total flux cleaned = 0.0053605 Jy ! Component: 400 - total flux cleaned = 0.00563681 Jy ! Component: 450 - total flux cleaned = 0.00590525 Jy ! Component: 500 - total flux cleaned = 0.00621662 Jy ! Component: 550 - total flux cleaned = 0.00656966 Jy ! Component: 600 - total flux cleaned = 0.00710744 Jy ! Component: 650 - total flux cleaned = 0.0075818 Jy ! Component: 700 - total flux cleaned = 0.0080441 Jy ! Component: 750 - total flux cleaned = 0.00849442 Jy ! Component: 800 - total flux cleaned = 0.00875818 Jy ! Component: 850 - total flux cleaned = 0.00910192 Jy ! Component: 900 - total flux cleaned = 0.00935486 Jy ! Component: 950 - total flux cleaned = 0.00956146 Jy ! Component: 1000 - total flux cleaned = 0.00988562 Jy ! Component: 1050 - total flux cleaned = 0.0101236 Jy ! Component: 1100 - total flux cleaned = 0.0103572 Jy ! Component: 1150 - total flux cleaned = 0.0105482 Jy ! Component: 1200 - total flux cleaned = 0.0106985 Jy ! Component: 1250 - total flux cleaned = 0.0109199 Jy ! Component: 1300 - total flux cleaned = 0.0110647 Jy ! Component: 1350 - total flux cleaned = 0.0112073 Jy ! Component: 1400 - total flux cleaned = 0.0113827 Jy ! Component: 1450 - total flux cleaned = 0.0115555 Jy ! Component: 1500 - total flux cleaned = 0.0117599 Jy ! Component: 1550 - total flux cleaned = 0.0118608 Jy ! Component: 1600 - total flux cleaned = 0.0120586 Jy ! Component: 1650 - total flux cleaned = 0.0122531 Jy ! Component: 1700 - total flux cleaned = 0.0124131 Jy ! Component: 1750 - total flux cleaned = 0.0126653 Jy ! Component: 1800 - total flux cleaned = 0.0128518 Jy ! Component: 1850 - total flux cleaned = 0.0130358 Jy ! Component: 1900 - total flux cleaned = 0.013248 Jy ! Component: 1950 - total flux cleaned = 0.0134274 Jy ! Component: 2000 - total flux cleaned = 0.0136636 Jy ! Total flux subtracted in 2048 components = 0.013809 Jy ! Clean residual min=-0.001715 max=0.001890 Jy/beam ! Clean residual mean=0.000009 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.440286 Jy keep ! Adding 142 model components to the UV plane model. ! The established model now contains 230 components and 0.440286 Jy ![Exited script file: muppet] wmap "J0003-1149_S_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.423 x 8.46 at -4.394 degrees (North through East) ! Clean map min=-0.0043287 max=0.32364 Jy/beam ! Writing clean map to FITS file: J0003-1149_S_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.323637 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000620712 device "J0003-1149_S_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J0003-1149_S_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.575378 0.575378 1.15076 2.30151 4.60303 9.20605 18.4121 36.8242 73.6484 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.323 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.423 x 8.46 at -4.394 degrees (North through East) ! Clean map min=-0.0043287 max=0.32364 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0003-1149_S_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J0003-1149_S_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0003-1149_S_1997_05_07_yyk_uvs.log closed on Sun Jan 7 15:13:58 2007