! Started logfile: difmap.log_455 on Fri Feb 14 22:50:12 2020 ![@/tmp/difmap__11273.1] ! Obeying initialization file: /tmp/difmap__11273.1 ![@/home/lpetrov/config/difmap.cnf] device /XW ! Attempting to open device: '/XW' vflags="fb3" integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float taper_size taper_size = 70. integer field_size field_size = 1024 float field_cell field_cell = 0.1 float old_peak float new_peak float flux_cutoff ![Exited script file: /home/lpetrov/config/difmap.cnf] ![@/tmp/difmap__11273.2] ![Exited script file: /tmp/difmap__11273.2] obs J2210-1046_X_uva.fits ! Reading UV FITS file: J2210-1046_X_uva.fits ! AN table 1: 15 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.973333 visibilities/baseline/integration-bin. ! Found source: J2210-1046 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 67 lines of history. ! ! Reading 1168 visibilities. ![Exited script file: /tmp/difmap__11273.1] sele I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 field_size=1024 field_cell=0.1 taper_size = 70. mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.000826Jy sigma=20.151111 ! Fit after self-cal, rms=0.975305Jy sigma=19.647124 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. radplot ! Using default options string "m1" ! Move the cursor into the plot window and press 'H' for help ! Applying 7 buffered edits. uvaver77 ! Syntax error in line: ! uvaver77 ! ^ ! Unable to identify keyword "uvaver77" ! uvaver 77 ! Averaging into 77 second bins. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clrmod true,true clean 200, 0.02 ! Inverting map and beam ! Estimated beam: bmin=3.448 mas, bmaj=6.149 mas, bpa=55.09 degrees ! Estimated noise=1.5633 mJy/beam. ! clean: niter=200 gain=0.02 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153253 Jy ! Component: 100 - total flux cleaned = 0.0205096 Jy ! Component: 150 - total flux cleaned = 0.0203023 Jy ! Component: 200 - total flux cleaned = 0.0200737 Jy ! Total flux subtracted in 200 components = 0.0200737 Jy ! Clean residual min=-0.001761 max=0.001762 Jy/beam ! Clean residual mean=0.000004 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 0.0200737 Jy mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029934Jy sigma=1.481717 ! Fit after self-cal, rms=0.029934Jy sigma=1.481717 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=3.448 mas, bmaj=6.149 mas, bpa=55.09 degrees ! Estimated noise=1.5633 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00951937 Jy ! Component: 100 - total flux cleaned = 0.0152804 Jy ! Component: 150 - total flux cleaned = 0.0187672 Jy ! Component: 200 - total flux cleaned = 0.0208777 Jy ! Component: 250 - total flux cleaned = 0.022165 Jy ! Component: 300 - total flux cleaned = 0.0230416 Jy ! Component: 350 - total flux cleaned = 0.0236766 Jy ! Component: 400 - total flux cleaned = 0.0241565 Jy ! Component: 450 - total flux cleaned = 0.0245425 Jy ! Component: 500 - total flux cleaned = 0.0248618 Jy ! Component: 550 - total flux cleaned = 0.0251277 Jy ! Component: 600 - total flux cleaned = 0.0253501 Jy ! Component: 650 - total flux cleaned = 0.0255362 Jy ! Component: 700 - total flux cleaned = 0.0256919 Jy ! Component: 750 - total flux cleaned = 0.0257574 Jy ! Component: 800 - total flux cleaned = 0.0257787 Jy ! Total flux subtracted in 800 components = 0.0257787 Jy ! Clean residual min=-0.003856 max=0.002620 Jy/beam ! Clean residual mean=-0.000008 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.0257786 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.0257786 Jy ! Inverting map and beam ! Estimated beam: bmin=3.866 mas, bmaj=6.27 mas, bpa=54.82 degrees ! Estimated noise=1.02998 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000158732 Jy ! Component: 100 - total flux cleaned = 0.000158421 Jy ! Component: 150 - total flux cleaned = 0.000158175 Jy ! Component: 200 - total flux cleaned = 0.000157994 Jy ! Component: 250 - total flux cleaned = 0.000157835 Jy ! Component: 300 - total flux cleaned = 0.000166852 Jy ! Component: 350 - total flux cleaned = 0.000211534 Jy ! Component: 400 - total flux cleaned = 0.000255156 Jy ! Component: 450 - total flux cleaned = 0.000297796 Jy ! Component: 500 - total flux cleaned = 0.000339514 Jy ! Component: 550 - total flux cleaned = 0.000380539 Jy ! Component: 600 - total flux cleaned = 0.000412731 Jy ! Component: 650 - total flux cleaned = 0.00045219 Jy ! Component: 700 - total flux cleaned = 0.000490961 Jy ! Component: 750 - total flux cleaned = 0.000521368 Jy ! Component: 800 - total flux cleaned = 0.000558624 Jy ! Component: 850 - total flux cleaned = 0.000587967 Jy ! Component: 900 - total flux cleaned = 0.000623987 Jy ! Component: 950 - total flux cleaned = 0.000652209 Jy ! Component: 1000 - total flux cleaned = 0.000680282 Jy ! Component: 1050 - total flux cleaned = 0.000701254 Jy ! Component: 1100 - total flux cleaned = 0.000722112 Jy ! Component: 1150 - total flux cleaned = 0.000749825 Jy ! Component: 1200 - total flux cleaned = 0.000770438 Jy ! Total flux subtracted in 1200 components = 0.000770438 Jy ! Clean residual min=-0.004522 max=0.003139 Jy/beam ! Clean residual mean=-0.000007 rms=0.001287 Jy/beam ! Combined flux in latest and established models = 0.0265491 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029934Jy sigma=1.481717 ! Fit after self-cal, rms=0.029934Jy sigma=1.481717 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=3.448 mas, bmaj=6.149 mas, bpa=55.09 degrees ! Estimated noise=1.5633 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00951937 Jy ! Component: 100 - total flux cleaned = 0.0152804 Jy ! Component: 150 - total flux cleaned = 0.0187672 Jy ! Component: 200 - total flux cleaned = 0.0208777 Jy ! Component: 250 - total flux cleaned = 0.0221681 Jy ! Component: 300 - total flux cleaned = 0.0231094 Jy ! Component: 350 - total flux cleaned = 0.0238917 Jy ! Component: 400 - total flux cleaned = 0.02456 Jy ! Component: 450 - total flux cleaned = 0.0251375 Jy ! Component: 500 - total flux cleaned = 0.0256477 Jy ! Component: 550 - total flux cleaned = 0.0261035 Jy ! Component: 600 - total flux cleaned = 0.0265118 Jy ! Component: 650 - total flux cleaned = 0.0268777 Jy ! Component: 700 - total flux cleaned = 0.0272057 Jy ! Component: 750 - total flux cleaned = 0.0274999 Jy ! Component: 800 - total flux cleaned = 0.0277637 Jy ! Total flux subtracted in 800 components = 0.0277637 Jy ! Clean residual min=-0.003574 max=0.002770 Jy/beam ! Clean residual mean=-0.000008 rms=0.001019 Jy/beam ! Combined flux in latest and established models = 0.0277637 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 64 model components to the UV plane model. ! The established model now contains 64 components and 0.0277637 Jy ! Inverting map and beam ! Estimated beam: bmin=3.866 mas, bmaj=6.27 mas, bpa=54.82 degrees ! Estimated noise=1.02998 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000669862 Jy ! Component: 100 - total flux cleaned = 0.00115724 Jy ! Component: 150 - total flux cleaned = 0.00132142 Jy ! Component: 200 - total flux cleaned = 0.00143655 Jy ! Component: 250 - total flux cleaned = 0.00152682 Jy ! Component: 300 - total flux cleaned = 0.00161978 Jy ! Component: 350 - total flux cleaned = 0.00169343 Jy ! Component: 400 - total flux cleaned = 0.00176089 Jy ! Component: 450 - total flux cleaned = 0.001823 Jy ! Component: 500 - total flux cleaned = 0.00188064 Jy ! Component: 550 - total flux cleaned = 0.00192684 Jy ! Component: 600 - total flux cleaned = 0.00197045 Jy ! Component: 650 - total flux cleaned = 0.00201189 Jy ! Component: 700 - total flux cleaned = 0.00204481 Jy ! Component: 750 - total flux cleaned = 0.00208264 Jy ! Component: 800 - total flux cleaned = 0.00211289 Jy ! Component: 850 - total flux cleaned = 0.00214199 Jy ! Component: 900 - total flux cleaned = 0.0021759 Jy ! Component: 950 - total flux cleaned = 0.00220382 Jy ! Component: 1000 - total flux cleaned = 0.00223678 Jy ! Component: 1050 - total flux cleaned = 0.00226391 Jy ! Component: 1100 - total flux cleaned = 0.00229063 Jy ! Component: 1150 - total flux cleaned = 0.00231707 Jy ! Component: 1200 - total flux cleaned = 0.00234844 Jy ! Total flux subtracted in 1200 components = 0.00234844 Jy ! Clean residual min=-0.003734 max=0.002846 Jy/beam ! Clean residual mean=-0.000009 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.0301122 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029934Jy sigma=1.481717 ! Fit after self-cal, rms=0.029934Jy sigma=1.481717 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=3.448 mas, bmaj=6.149 mas, bpa=55.09 degrees ! Estimated noise=1.5633 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00951937 Jy ! Component: 100 - total flux cleaned = 0.0152804 Jy ! Component: 150 - total flux cleaned = 0.0187672 Jy ! Component: 200 - total flux cleaned = 0.0208777 Jy ! Component: 250 - total flux cleaned = 0.0221681 Jy ! Component: 300 - total flux cleaned = 0.0231094 Jy ! Component: 350 - total flux cleaned = 0.0238917 Jy ! Component: 400 - total flux cleaned = 0.02456 Jy ! Component: 450 - total flux cleaned = 0.0251375 Jy ! Component: 500 - total flux cleaned = 0.0256477 Jy ! Component: 550 - total flux cleaned = 0.0261035 Jy ! Component: 600 - total flux cleaned = 0.0265118 Jy ! Component: 650 - total flux cleaned = 0.0268777 Jy ! Component: 700 - total flux cleaned = 0.0272057 Jy ! Component: 750 - total flux cleaned = 0.0274999 Jy ! Component: 800 - total flux cleaned = 0.0277637 Jy ! Total flux subtracted in 800 components = 0.0277637 Jy ! Clean residual min=-0.003574 max=0.002770 Jy/beam ! Clean residual mean=-0.000008 rms=0.001019 Jy/beam ! Combined flux in latest and established models = 0.0277637 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 64 model components to the UV plane model. ! The established model now contains 64 components and 0.0277637 Jy ! Inverting map and beam ! Estimated beam: bmin=3.866 mas, bmaj=6.27 mas, bpa=54.82 degrees ! Estimated noise=1.02998 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000669862 Jy ! Component: 100 - total flux cleaned = 0.00115724 Jy ! Component: 150 - total flux cleaned = 0.00132142 Jy ! Component: 200 - total flux cleaned = 0.00143655 Jy ! Component: 250 - total flux cleaned = 0.00152682 Jy ! Component: 300 - total flux cleaned = 0.00161978 Jy ! Component: 350 - total flux cleaned = 0.00169343 Jy ! Component: 400 - total flux cleaned = 0.00176089 Jy ! Component: 450 - total flux cleaned = 0.001823 Jy ! Component: 500 - total flux cleaned = 0.00188064 Jy ! Component: 550 - total flux cleaned = 0.00192684 Jy ! Component: 600 - total flux cleaned = 0.00197045 Jy ! Component: 650 - total flux cleaned = 0.00201189 Jy ! Component: 700 - total flux cleaned = 0.00204481 Jy ! Component: 750 - total flux cleaned = 0.00208264 Jy ! Component: 800 - total flux cleaned = 0.00211289 Jy ! Component: 850 - total flux cleaned = 0.00214199 Jy ! Component: 900 - total flux cleaned = 0.0021759 Jy ! Component: 950 - total flux cleaned = 0.00220382 Jy ! Component: 1000 - total flux cleaned = 0.00223678 Jy ! Component: 1050 - total flux cleaned = 0.00226391 Jy ! Component: 1100 - total flux cleaned = 0.00229063 Jy ! Component: 1150 - total flux cleaned = 0.00231707 Jy ! Component: 1200 - total flux cleaned = 0.00234844 Jy ! Total flux subtracted in 1200 components = 0.00234844 Jy ! Clean residual min=-0.003734 max=0.002846 Jy/beam ! Clean residual mean=-0.000009 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.0301122 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029934Jy sigma=1.481717 ! Fit after self-cal, rms=0.029934Jy sigma=1.481717 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=3.448 mas, bmaj=6.149 mas, bpa=55.09 degrees ! Estimated noise=1.5633 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00951937 Jy ! Component: 100 - total flux cleaned = 0.0152804 Jy ! Component: 150 - total flux cleaned = 0.0187672 Jy ! Component: 200 - total flux cleaned = 0.0208777 Jy ! Component: 250 - total flux cleaned = 0.0221681 Jy ! Component: 300 - total flux cleaned = 0.0231156 Jy ! Component: 350 - total flux cleaned = 0.0239423 Jy ! Component: 400 - total flux cleaned = 0.0246917 Jy ! Component: 450 - total flux cleaned = 0.0253787 Jy ! Component: 500 - total flux cleaned = 0.0260133 Jy ! Component: 550 - total flux cleaned = 0.0266012 Jy ! Component: 600 - total flux cleaned = 0.0271482 Jy ! Component: 650 - total flux cleaned = 0.0276586 Jy ! Component: 700 - total flux cleaned = 0.028136 Jy ! Component: 750 - total flux cleaned = 0.0285832 Jy ! Component: 800 - total flux cleaned = 0.0290032 Jy ! Total flux subtracted in 800 components = 0.0290032 Jy ! Clean residual min=-0.003234 max=0.002219 Jy/beam ! Clean residual mean=-0.000004 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.0290032 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 96 model components to the UV plane model. ! The established model now contains 96 components and 0.0290032 Jy ! Inverting map and beam ! Estimated beam: bmin=3.866 mas, bmaj=6.27 mas, bpa=54.82 degrees ! Estimated noise=1.02998 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000708139 Jy ! Component: 100 - total flux cleaned = 0.00124474 Jy ! Component: 150 - total flux cleaned = 0.00170252 Jy ! Component: 200 - total flux cleaned = 0.00209763 Jy ! Component: 250 - total flux cleaned = 0.00244034 Jy ! Component: 300 - total flux cleaned = 0.00273809 Jy ! Component: 350 - total flux cleaned = 0.00299721 Jy ! Component: 400 - total flux cleaned = 0.00322302 Jy ! Component: 450 - total flux cleaned = 0.00331981 Jy ! Component: 500 - total flux cleaned = 0.00340159 Jy ! Component: 550 - total flux cleaned = 0.00348404 Jy ! Component: 600 - total flux cleaned = 0.00356014 Jy ! Component: 650 - total flux cleaned = 0.00363049 Jy ! Component: 700 - total flux cleaned = 0.00369552 Jy ! Component: 750 - total flux cleaned = 0.0037557 Jy ! Component: 800 - total flux cleaned = 0.0038069 Jy ! Component: 850 - total flux cleaned = 0.00385878 Jy ! Component: 900 - total flux cleaned = 0.00390298 Jy ! Component: 950 - total flux cleaned = 0.00394783 Jy ! Component: 1000 - total flux cleaned = 0.0039759 Jy ! Component: 1050 - total flux cleaned = 0.00400296 Jy ! Component: 1100 - total flux cleaned = 0.00402585 Jy ! Component: 1150 - total flux cleaned = 0.004048 Jy ! Component: 1200 - total flux cleaned = 0.00407243 Jy ! Total flux subtracted in 1200 components = 0.00407243 Jy ! Clean residual min=-0.003272 max=0.002671 Jy/beam ! Clean residual mean=-0.000007 rms=0.000936 Jy/beam ! Combined flux in latest and established models = 0.0330757 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help uy1 ! Syntax error in line: ! uy1 ! ^ ! Unable to identify keyword "uy1" ! uncalib selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 133 components and 0.0330756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.014119Jy sigma=0.644004 ! Fit after self-cal, rms=0.013838Jy sigma=0.631844 selfcal true,true,1.e6 ! Performing amp+phase self-cal over 1e+06 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.013838Jy sigma=0.631844 ! Fit after self-cal, rms=0.014312Jy sigma=0.545381 clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.030129Jy sigma=1.481717 ! Fit after self-cal, rms=0.030129Jy sigma=1.481717 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Inverting map and beam ! Estimated beam: bmin=3.387 mas, bmaj=6.49 mas, bpa=54.73 degrees ! Estimated noise=1.59431 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00975366 Jy ! Component: 100 - total flux cleaned = 0.0156547 Jy ! Component: 150 - total flux cleaned = 0.0192256 Jy ! Component: 200 - total flux cleaned = 0.0213869 Jy ! Component: 250 - total flux cleaned = 0.0227084 Jy ! Component: 300 - total flux cleaned = 0.0236878 Jy ! Component: 350 - total flux cleaned = 0.0245109 Jy ! Component: 400 - total flux cleaned = 0.0252114 Jy ! Component: 450 - total flux cleaned = 0.0258087 Jy ! Component: 500 - total flux cleaned = 0.0263185 Jy ! Component: 550 - total flux cleaned = 0.0267724 Jy ! Component: 600 - total flux cleaned = 0.0271917 Jy ! Component: 650 - total flux cleaned = 0.0275792 Jy ! Component: 700 - total flux cleaned = 0.0279377 Jy ! Component: 750 - total flux cleaned = 0.0282717 Jy ! Component: 800 - total flux cleaned = 0.0285833 Jy ! Component: 850 - total flux cleaned = 0.0288743 Jy ! Component: 900 - total flux cleaned = 0.029146 Jy ! Component: 950 - total flux cleaned = 0.0293996 Jy ! Component: 1000 - total flux cleaned = 0.0296365 Jy ! Component: 1050 - total flux cleaned = 0.0298578 Jy ! Component: 1100 - total flux cleaned = 0.0300645 Jy ! Component: 1150 - total flux cleaned = 0.0302577 Jy ! Component: 1200 - total flux cleaned = 0.0303606 Jy ! Total flux subtracted in 1200 components = 0.0303606 Jy ! Clean residual min=-0.002331 max=0.002026 Jy/beam ! Clean residual mean=0.000008 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.0303605 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 2000, 0.01 ! Adding 49 model components to the UV plane model. ! The established model now contains 49 components and 0.0303605 Jy ! Inverting map and beam ! Estimated beam: bmin=3.852 mas, bmaj=6.702 mas, bpa=53.33 degrees ! Estimated noise=1.02096 mJy/beam. ! clean: niter=2000 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000663625 Jy ! Component: 100 - total flux cleaned = 0.00108214 Jy ! Component: 150 - total flux cleaned = 0.00120959 Jy ! Component: 200 - total flux cleaned = 0.00132151 Jy ! Component: 250 - total flux cleaned = 0.00140824 Jy ! Component: 300 - total flux cleaned = 0.00148588 Jy ! Component: 350 - total flux cleaned = 0.00156454 Jy ! Component: 400 - total flux cleaned = 0.00161731 Jy ! Component: 450 - total flux cleaned = 0.00168964 Jy ! Component: 500 - total flux cleaned = 0.0017485 Jy ! Component: 550 - total flux cleaned = 0.00180949 Jy ! Component: 600 - total flux cleaned = 0.00187341 Jy ! Component: 650 - total flux cleaned = 0.00193397 Jy ! Component: 700 - total flux cleaned = 0.00199137 Jy ! Component: 750 - total flux cleaned = 0.00204578 Jy ! Component: 800 - total flux cleaned = 0.00209228 Jy ! Component: 850 - total flux cleaned = 0.00214135 Jy ! Component: 900 - total flux cleaned = 0.0021833 Jy ! Component: 950 - total flux cleaned = 0.00222327 Jy ! Component: 1000 - total flux cleaned = 0.0022613 Jy ! Component: 1050 - total flux cleaned = 0.0022975 Jy ! Component: 1100 - total flux cleaned = 0.00233201 Jy ! Component: 1150 - total flux cleaned = 0.00236488 Jy ! Component: 1200 - total flux cleaned = 0.00239276 Jy ! Component: 1250 - total flux cleaned = 0.00241946 Jy ! Component: 1300 - total flux cleaned = 0.00244509 Jy ! Component: 1350 - total flux cleaned = 0.00246972 Jy ! Component: 1400 - total flux cleaned = 0.00249339 Jy ! Component: 1450 - total flux cleaned = 0.00251611 Jy ! Component: 1500 - total flux cleaned = 0.00253525 Jy ! Component: 1550 - total flux cleaned = 0.00255374 Jy ! Component: 1600 - total flux cleaned = 0.00257416 Jy ! Component: 1650 - total flux cleaned = 0.00259137 Jy ! Component: 1700 - total flux cleaned = 0.00260805 Jy ! Component: 1750 - total flux cleaned = 0.00262646 Jy ! Component: 1800 - total flux cleaned = 0.00264204 Jy ! Component: 1850 - total flux cleaned = 0.00265501 Jy ! Component: 1900 - total flux cleaned = 0.00267179 Jy ! Component: 1950 - total flux cleaned = 0.00268401 Jy ! Component: 2000 - total flux cleaned = 0.00269787 Jy ! Total flux subtracted in 2000 components = 0.00269787 Jy ! Clean residual min=-0.001361 max=0.001560 Jy/beam ! Clean residual mean=0.000010 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.0330584 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.030129Jy sigma=1.481717 ! Fit after self-cal, rms=0.030129Jy sigma=1.481717 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=3.387 mas, bmaj=6.49 mas, bpa=54.73 degrees ! Estimated noise=1.59431 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00975366 Jy ! Component: 100 - total flux cleaned = 0.0156547 Jy ! Component: 150 - total flux cleaned = 0.0192256 Jy ! Component: 200 - total flux cleaned = 0.0213869 Jy ! Component: 250 - total flux cleaned = 0.0227089 Jy ! Component: 300 - total flux cleaned = 0.0236975 Jy ! Component: 350 - total flux cleaned = 0.024527 Jy ! Component: 400 - total flux cleaned = 0.0252291 Jy ! Component: 450 - total flux cleaned = 0.0258252 Jy ! Component: 500 - total flux cleaned = 0.0263327 Jy ! Component: 550 - total flux cleaned = 0.0267874 Jy ! Component: 600 - total flux cleaned = 0.027205 Jy ! Component: 650 - total flux cleaned = 0.0275884 Jy ! Component: 700 - total flux cleaned = 0.0279406 Jy ! Component: 750 - total flux cleaned = 0.0282652 Jy ! Component: 800 - total flux cleaned = 0.0285649 Jy ! Total flux subtracted in 800 components = 0.0285649 Jy ! Clean residual min=-0.002463 max=0.002092 Jy/beam ! Clean residual mean=0.000008 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.0285649 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.0285649 Jy ! Inverting map and beam ! Estimated beam: bmin=3.852 mas, bmaj=6.702 mas, bpa=53.33 degrees ! Estimated noise=1.02096 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000835566 Jy ! Component: 100 - total flux cleaned = 0.00141526 Jy ! Component: 150 - total flux cleaned = 0.001824 Jy ! Component: 200 - total flux cleaned = 0.00187595 Jy ! Component: 250 - total flux cleaned = 0.0019095 Jy ! Component: 300 - total flux cleaned = 0.00193896 Jy ! Component: 350 - total flux cleaned = 0.0020025 Jy ! Component: 400 - total flux cleaned = 0.00206175 Jy ! Component: 450 - total flux cleaned = 0.00212719 Jy ! Component: 500 - total flux cleaned = 0.00219062 Jy ! Component: 550 - total flux cleaned = 0.00225208 Jy ! Component: 600 - total flux cleaned = 0.00231183 Jy ! Component: 650 - total flux cleaned = 0.00236982 Jy ! Component: 700 - total flux cleaned = 0.00243299 Jy ! Component: 750 - total flux cleaned = 0.00248743 Jy ! Component: 800 - total flux cleaned = 0.00254027 Jy ! Component: 850 - total flux cleaned = 0.00259789 Jy ! Component: 900 - total flux cleaned = 0.00264762 Jy ! Component: 950 - total flux cleaned = 0.00269585 Jy ! Component: 1000 - total flux cleaned = 0.00274851 Jy ! Component: 1050 - total flux cleaned = 0.00279378 Jy ! Component: 1100 - total flux cleaned = 0.00283777 Jy ! Component: 1150 - total flux cleaned = 0.00288059 Jy ! Component: 1200 - total flux cleaned = 0.00292737 Jy ! Total flux subtracted in 1200 components = 0.00292737 Jy ! Clean residual min=-0.001663 max=0.001576 Jy/beam ! Clean residual mean=0.000010 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.0314923 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.030129Jy sigma=1.481717 ! Fit after self-cal, rms=0.030129Jy sigma=1.481717 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=3.387 mas, bmaj=6.49 mas, bpa=54.73 degrees ! Estimated noise=1.59431 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00975366 Jy ! Component: 100 - total flux cleaned = 0.0156547 Jy ! Component: 150 - total flux cleaned = 0.0192256 Jy ! Component: 200 - total flux cleaned = 0.0213869 Jy ! Component: 250 - total flux cleaned = 0.0227089 Jy ! Component: 300 - total flux cleaned = 0.0236977 Jy ! Component: 350 - total flux cleaned = 0.0245288 Jy ! Component: 400 - total flux cleaned = 0.0252343 Jy ! Component: 450 - total flux cleaned = 0.0258352 Jy ! Component: 500 - total flux cleaned = 0.0263502 Jy ! Component: 550 - total flux cleaned = 0.0268177 Jy ! Component: 600 - total flux cleaned = 0.0272507 Jy ! Component: 650 - total flux cleaned = 0.0276537 Jy ! Component: 700 - total flux cleaned = 0.0280298 Jy ! Component: 750 - total flux cleaned = 0.0283815 Jy ! Component: 800 - total flux cleaned = 0.0287111 Jy ! Total flux subtracted in 800 components = 0.0287111 Jy ! Clean residual min=-0.002376 max=0.002071 Jy/beam ! Clean residual mean=0.000008 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.0287111 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 55 model components to the UV plane model. ! The established model now contains 55 components and 0.0287111 Jy ! Inverting map and beam ! Estimated beam: bmin=3.852 mas, bmaj=6.702 mas, bpa=53.33 degrees ! Estimated noise=1.02096 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000877993 Jy ! Component: 100 - total flux cleaned = 0.0015556 Jy ! Component: 150 - total flux cleaned = 0.00209712 Jy ! Component: 200 - total flux cleaned = 0.00252991 Jy ! Component: 250 - total flux cleaned = 0.00287715 Jy ! Component: 300 - total flux cleaned = 0.00306284 Jy ! Component: 350 - total flux cleaned = 0.00314289 Jy ! Component: 400 - total flux cleaned = 0.0031971 Jy ! Component: 450 - total flux cleaned = 0.0032543 Jy ! Component: 500 - total flux cleaned = 0.00332841 Jy ! Component: 550 - total flux cleaned = 0.00340448 Jy ! Component: 600 - total flux cleaned = 0.0034691 Jy ! Component: 650 - total flux cleaned = 0.00353565 Jy ! Component: 700 - total flux cleaned = 0.00359233 Jy ! Component: 750 - total flux cleaned = 0.00364569 Jy ! Component: 800 - total flux cleaned = 0.00369658 Jy ! Component: 850 - total flux cleaned = 0.00374032 Jy ! Component: 900 - total flux cleaned = 0.0037823 Jy ! Component: 950 - total flux cleaned = 0.00382254 Jy ! Component: 1000 - total flux cleaned = 0.00386114 Jy ! Component: 1050 - total flux cleaned = 0.00389807 Jy ! Component: 1100 - total flux cleaned = 0.00393351 Jy ! Component: 1150 - total flux cleaned = 0.00396373 Jy ! Component: 1200 - total flux cleaned = 0.00399285 Jy ! Total flux subtracted in 1200 components = 0.00399285 Jy ! Clean residual min=-0.001389 max=0.001440 Jy/beam ! Clean residual mean=0.000010 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.0327039 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.030129Jy sigma=1.481717 ! Fit after self-cal, rms=0.030129Jy sigma=1.481717 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=3.387 mas, bmaj=6.49 mas, bpa=54.73 degrees ! Estimated noise=1.59431 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00975366 Jy ! Component: 100 - total flux cleaned = 0.0156547 Jy ! Component: 150 - total flux cleaned = 0.0192256 Jy ! Component: 200 - total flux cleaned = 0.0213869 Jy ! Component: 250 - total flux cleaned = 0.0227089 Jy ! Component: 300 - total flux cleaned = 0.0236977 Jy ! Component: 350 - total flux cleaned = 0.0245288 Jy ! Component: 400 - total flux cleaned = 0.0252343 Jy ! Component: 450 - total flux cleaned = 0.0258352 Jy ! Component: 500 - total flux cleaned = 0.0263479 Jy ! Component: 550 - total flux cleaned = 0.0267855 Jy ! Component: 600 - total flux cleaned = 0.0271595 Jy ! Component: 650 - total flux cleaned = 0.0274804 Jy ! Component: 700 - total flux cleaned = 0.0277564 Jy ! Component: 750 - total flux cleaned = 0.0279939 Jy ! Component: 800 - total flux cleaned = 0.0281985 Jy ! Total flux subtracted in 800 components = 0.0281985 Jy ! Clean residual min=-0.002429 max=0.002565 Jy/beam ! Clean residual mean=0.000006 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.0281985 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.0281985 Jy ! Inverting map and beam ! Estimated beam: bmin=3.852 mas, bmaj=6.702 mas, bpa=53.33 degrees ! Estimated noise=1.02096 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000613659 Jy ! Component: 100 - total flux cleaned = 0.00076905 Jy ! Component: 150 - total flux cleaned = 0.000796173 Jy ! Component: 200 - total flux cleaned = 0.000821339 Jy ! Component: 250 - total flux cleaned = 0.000855984 Jy ! Component: 300 - total flux cleaned = 0.000877478 Jy ! Component: 350 - total flux cleaned = 0.000897639 Jy ! Component: 400 - total flux cleaned = 0.000925841 Jy ! Component: 450 - total flux cleaned = 0.000943342 Jy ! Component: 500 - total flux cleaned = 0.000959698 Jy ! Component: 550 - total flux cleaned = 0.000967294 Jy ! Component: 600 - total flux cleaned = 0.000974411 Jy ! Component: 650 - total flux cleaned = 0.000974468 Jy ! Component: 700 - total flux cleaned = 0.00098092 Jy ! Component: 750 - total flux cleaned = 0.000981028 Jy ! Component: 800 - total flux cleaned = 0.000986788 Jy ! Component: 850 - total flux cleaned = 0.000986779 Jy ! Component: 900 - total flux cleaned = 0.000986836 Jy ! Component: 950 - total flux cleaned = 0.000986919 Jy ! Component: 1000 - total flux cleaned = 0.000986877 Jy ! Component: 1050 - total flux cleaned = 0.000982248 Jy ! Component: 1100 - total flux cleaned = 0.000982298 Jy ! Component: 1150 - total flux cleaned = 0.000982305 Jy ! Component: 1200 - total flux cleaned = 0.000978208 Jy ! Total flux subtracted in 1200 components = 0.000978208 Jy ! Clean residual min=-0.002099 max=0.002661 Jy/beam ! Clean residual mean=0.000008 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.0291767 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help uncalib selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 70 components and 0.0291767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.014341Jy sigma=0.564691 ! Fit after self-cal, rms=0.014351Jy sigma=0.563099 selfcal true,true,1.e6 ! Performing amp+phase self-cal over 1e+06 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.014351Jy sigma=0.563099 ! Fit after self-cal, rms=0.014841Jy sigma=0.556081 levs=1.563,3.125,6.25,12.5,25.0,50.0 mapcol color ! Mapplot colormap: rainbow, contrast: 1 brightness: 0.5. mapl cln ! Inverting map and beam ! Estimated beam: bmin=3.853 mas, bmaj=6.958 mas, bpa=52.99 degrees ! Estimated noise=1.02695 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.853 x 6.958 at 52.99 degrees (North through East) ! Clean map min=-0.0016218 max=0.024974 Jy/beam ! ! Move the cursor into the plot window and press 'H' for help mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (512),0.01 ! Inverting map ! clean: niter=512 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000765066 Jy ! Component: 100 - total flux cleaned = 0.000808196 Jy ! Component: 150 - total flux cleaned = 0.000828632 Jy ! Component: 200 - total flux cleaned = 0.000864477 Jy ! Component: 250 - total flux cleaned = 0.000909278 Jy ! Component: 300 - total flux cleaned = 0.000947461 Jy ! Component: 350 - total flux cleaned = 0.00108646 Jy ! Component: 400 - total flux cleaned = 0.00119355 Jy ! Component: 450 - total flux cleaned = 0.00130577 Jy ! Component: 500 - total flux cleaned = 0.00141417 Jy ! Total flux subtracted in 512 components = 0.00143364 Jy ! Clean residual min=-0.000483 max=0.000504 Jy/beam ! Clean residual mean=0.000010 rms=0.000176 Jy/beam ! Combined flux in latest and established models = 0.0306103 Jy levs=1.563,3.125,6.25,12.5,25.0,50.0 mapcol color ! Mapplot colormap: rainbow, contrast: 1 brightness: 0.5. mapl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.853 x 6.958 at 52.99 degrees (North through East) ! Clean map min=-0.00048231 max=0.025147 Jy/beam ! Clean map min=-0.0011237 max=0.025147 Jy/beam ! ! Move the cursor into the plot window and press 'H' for help mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. save J2210-1046_X ! Writing UV FITS file: J2210-1046_X.uvf ! Writing 148 model components to file: J2210-1046_X.mod ! wwins: Wrote 3 windows to J2210-1046_X.win ! Adding 78 model components to the UV plane model. ! The established model now contains 148 components and 0.0306103 Jy ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.853 x 6.958 at 52.99 degrees (North through East) ! Clean map min=-0.0010859 max=0.025145 Jy/beam ! Writing clean map to FITS file: J2210-1046_X.fits ! Writing difmap environment to: J2210-1046_X.par quit ! Quitting program ! Log file difmap.log_455 closed on Fri Feb 14 22:51:19 2020