! Started logfile: difmap.log_25 on Thu Jan 23 11:38:08 2020 ![@/tmp/difmap__15853.1] ! Obeying initialization file: /tmp/difmap__15853.1 ![@/home/lpetrov/config/difmap.cnf] device /XW ! Attempting to open device: '/XW' vflags="fb3" integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float taper_size taper_size = 70. integer field_size field_size = 1024 float field_cell field_cell = 0.1 float old_peak float new_peak float flux_cutoff ![Exited script file: /home/lpetrov/config/difmap.cnf] ![@/tmp/difmap__15853.2] ![Exited script file: /tmp/difmap__15853.2] obs J0227+7109_X_uva.fits ! Reading UV FITS file: J0227+7109_X_uva.fits ! AN table 1: 15 integrations on 15 of 15 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0227+7109 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 85 lines of history. ! ! Reading 1800 visibilities. ![Exited script file: /tmp/difmap__15853.1] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clrmod true,true clean 200, 0.02 ! clean: No data stream selected yet. ! clean: Use the 'select' command to select a data stream. ! Error occured in command: clean ! sele I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 field_size=1024 field_cell=0.1 taper_size = 70. mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=1.002827Jy sigma=21.273860 ! Fit after self-cal, rms=0.977564Jy sigma=20.725091 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. radplot ! Using default options string "m1" ! Move the cursor into the plot window and press 'H' for help ! Applying 7 buffered edits. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clrmod true,true clean 200, 0.02 ! Inverting map and beam ! Estimated beam: bmin=2.23 mas, bmaj=3.398 mas, bpa=-39.63 degrees ! Estimated noise=1.07412 mJy/beam. ! clean: niter=200 gain=0.02 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132428 Jy ! Component: 100 - total flux cleaned = 0.0177617 Jy ! Component: 150 - total flux cleaned = 0.0187519 Jy ! Component: 200 - total flux cleaned = 0.0198486 Jy ! Total flux subtracted in 200 components = 0.0198486 Jy ! Clean residual min=-0.002296 max=0.002290 Jy/beam ! Clean residual mean=-0.000009 rms=0.001001 Jy/beam ! Combined flux in latest and established models = 0.0198486 Jy mapl map,true ! ! Move the cursor into the plot window and press 'H' for help maps 2048,0.1 ! Map grid = 2048x2048 pixels with 0.100x0.100 milli-arcsec cellsize. clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.040541Jy sigma=0.858683 ! Fit after self-cal, rms=0.040541Jy sigma=0.858683 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.437 mas, bmaj=3.081 mas, bpa=-46.5 degrees ! Estimated noise=1.23704 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00890735 Jy ! Component: 100 - total flux cleaned = 0.0142991 Jy ! Component: 150 - total flux cleaned = 0.0175639 Jy ! Component: 200 - total flux cleaned = 0.0196165 Jy ! Component: 250 - total flux cleaned = 0.0210849 Jy ! Component: 300 - total flux cleaned = 0.0221942 Jy ! Component: 350 - total flux cleaned = 0.0231106 Jy ! Component: 400 - total flux cleaned = 0.0238883 Jy ! Component: 450 - total flux cleaned = 0.0242181 Jy ! Component: 500 - total flux cleaned = 0.0244906 Jy ! Component: 550 - total flux cleaned = 0.0247161 Jy ! Component: 600 - total flux cleaned = 0.0249225 Jy ! Component: 650 - total flux cleaned = 0.025111 Jy ! Component: 700 - total flux cleaned = 0.0253175 Jy ! Component: 750 - total flux cleaned = 0.0255076 Jy ! Component: 800 - total flux cleaned = 0.0256833 Jy ! Total flux subtracted in 800 components = 0.0256833 Jy ! Clean residual min=-0.005095 max=0.007436 Jy/beam ! Clean residual mean=0.000004 rms=0.001742 Jy/beam ! Combined flux in latest and established models = 0.0256832 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 0.0256832 Jy ! Inverting map and beam ! Estimated beam: bmin=2.589 mas, bmaj=3.289 mas, bpa=-38.97 degrees ! Estimated noise=0.787438 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000473498 Jy ! Component: 100 - total flux cleaned = 0.000800416 Jy ! Component: 150 - total flux cleaned = 0.00106445 Jy ! Component: 200 - total flux cleaned = 0.00113701 Jy ! Component: 250 - total flux cleaned = 0.00119501 Jy ! Component: 300 - total flux cleaned = 0.00124855 Jy ! Component: 350 - total flux cleaned = 0.00127723 Jy ! Component: 400 - total flux cleaned = 0.00127729 Jy ! Component: 450 - total flux cleaned = 0.0012838 Jy ! Component: 500 - total flux cleaned = 0.00128372 Jy ! Component: 550 - total flux cleaned = 0.00128379 Jy ! Component: 600 - total flux cleaned = 0.00128967 Jy ! Component: 650 - total flux cleaned = 0.00128965 Jy ! Component: 700 - total flux cleaned = 0.00129523 Jy ! Component: 750 - total flux cleaned = 0.00129517 Jy ! Component: 800 - total flux cleaned = 0.00130578 Jy ! Component: 850 - total flux cleaned = 0.00131607 Jy ! Component: 900 - total flux cleaned = 0.00132619 Jy ! Component: 950 - total flux cleaned = 0.00133107 Jy ! Component: 1000 - total flux cleaned = 0.00133597 Jy ! Component: 1050 - total flux cleaned = 0.00134083 Jy ! Component: 1100 - total flux cleaned = 0.0013408 Jy ! Component: 1150 - total flux cleaned = 0.00134075 Jy ! Component: 1200 - total flux cleaned = 0.00134548 Jy ! Total flux subtracted in 1200 components = 0.00134548 Jy ! Clean residual min=-0.003688 max=0.005990 Jy/beam ! Clean residual mean=0.000001 rms=0.001486 Jy/beam ! Combined flux in latest and established models = 0.0270287 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help ! Note that 69 components lie outside the plot. ! Pixel value at x=-19.8 y=-10.6 (mas) is 0.00455 Jy/beam ! RA = 02 27 28.26941, Dec = +71 09 33.1434 (2000.0) ! Pixel value at x=-19.7 y=-10.7 (mas) is 0.00439 Jy/beam ! RA = 02 27 28.26943, Dec = +71 09 33.1433 (2000.0) ! Pixel value at x=20.5 y=11.5 (mas) is 0.00593 Jy/beam ! RA = 02 27 28.27773, Dec = +71 09 33.1655 (2000.0) clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.040541Jy sigma=0.858683 ! Fit after self-cal, rms=0.040541Jy sigma=0.858683 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.437 mas, bmaj=3.081 mas, bpa=-46.5 degrees ! Estimated noise=1.23704 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00890735 Jy ! Component: 100 - total flux cleaned = 0.0142991 Jy ! Component: 150 - total flux cleaned = 0.0176433 Jy ! Component: 200 - total flux cleaned = 0.0201407 Jy ! Component: 250 - total flux cleaned = 0.0221424 Jy ! Component: 300 - total flux cleaned = 0.0238084 Jy ! Component: 350 - total flux cleaned = 0.0252558 Jy ! Component: 400 - total flux cleaned = 0.0265582 Jy ! Component: 450 - total flux cleaned = 0.0277514 Jy ! Component: 500 - total flux cleaned = 0.0288508 Jy ! Component: 550 - total flux cleaned = 0.0298659 Jy ! Component: 600 - total flux cleaned = 0.0308048 Jy ! Component: 650 - total flux cleaned = 0.0316747 Jy ! Component: 700 - total flux cleaned = 0.0324817 Jy ! Component: 750 - total flux cleaned = 0.0332313 Jy ! Component: 800 - total flux cleaned = 0.0339295 Jy ! Total flux subtracted in 800 components = 0.0339295 Jy ! Clean residual min=-0.003961 max=0.004436 Jy/beam ! Clean residual mean=0.000002 rms=0.001285 Jy/beam ! Combined flux in latest and established models = 0.0339295 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 68 model components to the UV plane model. ! The established model now contains 68 components and 0.0339295 Jy ! Inverting map and beam ! Estimated beam: bmin=2.589 mas, bmaj=3.289 mas, bpa=-38.97 degrees ! Estimated noise=0.787438 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110348 Jy ! Component: 100 - total flux cleaned = 0.00195965 Jy ! Component: 150 - total flux cleaned = 0.00265053 Jy ! Component: 200 - total flux cleaned = 0.00325657 Jy ! Component: 250 - total flux cleaned = 0.00380104 Jy ! Component: 300 - total flux cleaned = 0.00429482 Jy ! Component: 350 - total flux cleaned = 0.00474861 Jy ! Component: 400 - total flux cleaned = 0.00516631 Jy ! Component: 450 - total flux cleaned = 0.00555138 Jy ! Component: 500 - total flux cleaned = 0.00590665 Jy ! Component: 550 - total flux cleaned = 0.00620921 Jy ! Component: 600 - total flux cleaned = 0.00642931 Jy ! Component: 650 - total flux cleaned = 0.00663491 Jy ! Component: 700 - total flux cleaned = 0.00682712 Jy ! Component: 750 - total flux cleaned = 0.00700686 Jy ! Component: 800 - total flux cleaned = 0.00717492 Jy ! Component: 850 - total flux cleaned = 0.00733218 Jy ! Component: 900 - total flux cleaned = 0.00747937 Jy ! Component: 950 - total flux cleaned = 0.00762462 Jy ! Component: 1000 - total flux cleaned = 0.00771832 Jy ! Component: 1050 - total flux cleaned = 0.00778665 Jy ! Component: 1100 - total flux cleaned = 0.00784533 Jy ! Component: 1150 - total flux cleaned = 0.00790773 Jy ! Component: 1200 - total flux cleaned = 0.00796152 Jy ! Total flux subtracted in 1200 components = 0.00796152 Jy ! Clean residual min=-0.002507 max=0.003026 Jy/beam ! Clean residual mean=0.000002 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.041891 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help maps 1024,0.15 ! Map grid = 1024x1024 pixels with 0.150x0.150 milli-arcsec cellsize. clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.040541Jy sigma=0.858683 ! Fit after self-cal, rms=0.040541Jy sigma=0.858683 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.142 mas, bmaj=3.31 mas, bpa=-50.36 degrees ! Estimated noise=1.45059 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00857542 Jy ! Component: 100 - total flux cleaned = 0.0137758 Jy ! Component: 150 - total flux cleaned = 0.0169376 Jy ! Component: 200 - total flux cleaned = 0.0190886 Jy ! Component: 250 - total flux cleaned = 0.0207444 Jy ! Component: 300 - total flux cleaned = 0.0220642 Jy ! Component: 350 - total flux cleaned = 0.0231823 Jy ! Component: 400 - total flux cleaned = 0.024152 Jy ! Component: 450 - total flux cleaned = 0.0250035 Jy ! Component: 500 - total flux cleaned = 0.0257569 Jy ! Component: 550 - total flux cleaned = 0.0264298 Jy ! Component: 600 - total flux cleaned = 0.027036 Jy ! Component: 650 - total flux cleaned = 0.0275844 Jy ! Component: 700 - total flux cleaned = 0.0280818 Jy ! Component: 750 - total flux cleaned = 0.0285344 Jy ! Component: 800 - total flux cleaned = 0.0289477 Jy ! Total flux subtracted in 800 components = 0.0289477 Jy ! Clean residual min=-0.003751 max=0.004861 Jy/beam ! Clean residual mean=0.000022 rms=0.001334 Jy/beam ! Combined flux in latest and established models = 0.0289477 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 75 model components to the UV plane model. ! The established model now contains 75 components and 0.0289477 Jy ! Inverting map and beam ! Estimated beam: bmin=2.589 mas, bmaj=3.289 mas, bpa=-38.97 degrees ! Estimated noise=0.787438 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 9.87765e-05 Jy ! Component: 100 - total flux cleaned = 9.83777e-05 Jy ! Component: 150 - total flux cleaned = 8.4872e-05 Jy ! Component: 200 - total flux cleaned = 6.05549e-05 Jy ! Component: 250 - total flux cleaned = 6.05481e-05 Jy ! Component: 300 - total flux cleaned = 4.89061e-05 Jy ! Component: 350 - total flux cleaned = 4.90538e-05 Jy ! Component: 400 - total flux cleaned = 3.79799e-05 Jy ! Component: 450 - total flux cleaned = 3.78943e-05 Jy ! Component: 500 - total flux cleaned = 2.72715e-05 Jy ! Component: 550 - total flux cleaned = 1.69757e-05 Jy ! Component: 600 - total flux cleaned = 6.98667e-06 Jy ! Component: 650 - total flux cleaned = -2.78215e-06 Jy ! Component: 700 - total flux cleaned = -2.60213e-06 Jy ! Component: 750 - total flux cleaned = -2.61837e-06 Jy ! Component: 800 - total flux cleaned = -1.186e-05 Jy ! Component: 850 - total flux cleaned = -2.09312e-05 Jy ! Component: 900 - total flux cleaned = -2.96914e-05 Jy ! Component: 950 - total flux cleaned = -2.96003e-05 Jy ! Component: 1000 - total flux cleaned = -2.95488e-05 Jy ! Component: 1050 - total flux cleaned = -3.78376e-05 Jy ! Component: 1100 - total flux cleaned = -5.42333e-05 Jy ! Component: 1150 - total flux cleaned = -6.23604e-05 Jy ! Component: 1200 - total flux cleaned = -7.03588e-05 Jy ! Total flux subtracted in 1200 components = -7.03588e-05 Jy ! Clean residual min=-0.003294 max=0.005488 Jy/beam ! Clean residual mean=0.000024 rms=0.001451 Jy/beam ! Combined flux in latest and established models = 0.0288774 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.040541Jy sigma=0.858683 ! Fit after self-cal, rms=0.040541Jy sigma=0.858683 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.142 mas, bmaj=3.31 mas, bpa=-50.36 degrees ! Estimated noise=1.45059 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00857542 Jy ! Component: 100 - total flux cleaned = 0.0137758 Jy ! Component: 150 - total flux cleaned = 0.0169418 Jy ! Component: 200 - total flux cleaned = 0.0192488 Jy ! Component: 250 - total flux cleaned = 0.0212065 Jy ! Component: 300 - total flux cleaned = 0.0229341 Jy ! Component: 350 - total flux cleaned = 0.0244781 Jy ! Component: 400 - total flux cleaned = 0.0258625 Jy ! Component: 450 - total flux cleaned = 0.0271085 Jy ! Component: 500 - total flux cleaned = 0.0282326 Jy ! Component: 550 - total flux cleaned = 0.0292514 Jy ! Component: 600 - total flux cleaned = 0.0301826 Jy ! Component: 650 - total flux cleaned = 0.0310385 Jy ! Component: 700 - total flux cleaned = 0.031827 Jy ! Component: 750 - total flux cleaned = 0.0325547 Jy ! Component: 800 - total flux cleaned = 0.0332307 Jy ! Total flux subtracted in 800 components = 0.0332307 Jy ! Clean residual min=-0.002762 max=0.002710 Jy/beam ! Clean residual mean=0.000016 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.0332308 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 70 model components to the UV plane model. ! The established model now contains 70 components and 0.0332308 Jy ! Inverting map and beam ! Estimated beam: bmin=2.589 mas, bmaj=3.289 mas, bpa=-38.97 degrees ! Estimated noise=0.787438 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107357 Jy ! Component: 100 - total flux cleaned = 0.00190116 Jy ! Component: 150 - total flux cleaned = 0.00256893 Jy ! Component: 200 - total flux cleaned = 0.00314857 Jy ! Component: 250 - total flux cleaned = 0.00368185 Jy ! Component: 300 - total flux cleaned = 0.00417739 Jy ! Component: 350 - total flux cleaned = 0.00463831 Jy ! Component: 400 - total flux cleaned = 0.00507028 Jy ! Component: 450 - total flux cleaned = 0.00547746 Jy ! Component: 500 - total flux cleaned = 0.00586258 Jy ! Component: 550 - total flux cleaned = 0.00622871 Jy ! Component: 600 - total flux cleaned = 0.00657877 Jy ! Component: 650 - total flux cleaned = 0.00691409 Jy ! Component: 700 - total flux cleaned = 0.00723543 Jy ! Component: 750 - total flux cleaned = 0.00754359 Jy ! Component: 800 - total flux cleaned = 0.00783917 Jy ! Component: 850 - total flux cleaned = 0.00812282 Jy ! Component: 900 - total flux cleaned = 0.00839511 Jy ! Component: 950 - total flux cleaned = 0.00865662 Jy ! Component: 1000 - total flux cleaned = 0.00890799 Jy ! Component: 1050 - total flux cleaned = 0.00914976 Jy ! Component: 1100 - total flux cleaned = 0.00938233 Jy ! Component: 1150 - total flux cleaned = 0.00960615 Jy ! Component: 1200 - total flux cleaned = 0.00982173 Jy ! Total flux subtracted in 1200 components = 0.00982173 Jy ! Clean residual min=-0.002201 max=0.002125 Jy/beam ! Clean residual mean=0.000010 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.0430525 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.040541Jy sigma=0.858683 ! Fit after self-cal, rms=0.040541Jy sigma=0.858683 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.142 mas, bmaj=3.31 mas, bpa=-50.36 degrees ! Estimated noise=1.45059 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00857542 Jy ! Component: 100 - total flux cleaned = 0.0137758 Jy ! Component: 150 - total flux cleaned = 0.0169418 Jy ! Component: 200 - total flux cleaned = 0.0192488 Jy ! Component: 250 - total flux cleaned = 0.0212065 Jy ! Component: 300 - total flux cleaned = 0.0229341 Jy ! Component: 350 - total flux cleaned = 0.0244781 Jy ! Component: 400 - total flux cleaned = 0.0258625 Jy ! Component: 450 - total flux cleaned = 0.0271085 Jy ! Component: 500 - total flux cleaned = 0.0282326 Jy ! Component: 550 - total flux cleaned = 0.0292514 Jy ! Component: 600 - total flux cleaned = 0.0301826 Jy ! Component: 650 - total flux cleaned = 0.0310395 Jy ! Component: 700 - total flux cleaned = 0.0318311 Jy ! Component: 750 - total flux cleaned = 0.0325668 Jy ! Component: 800 - total flux cleaned = 0.0332571 Jy ! Total flux subtracted in 800 components = 0.0332571 Jy ! Clean residual min=-0.002771 max=0.002705 Jy/beam ! Clean residual mean=0.000016 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.0332571 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 81 model components to the UV plane model. ! The established model now contains 81 components and 0.0332571 Jy ! Inverting map and beam ! Estimated beam: bmin=2.589 mas, bmaj=3.289 mas, bpa=-38.97 degrees ! Estimated noise=0.787438 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110505 Jy ! Component: 100 - total flux cleaned = 0.00197679 Jy ! Component: 150 - total flux cleaned = 0.00270703 Jy ! Component: 200 - total flux cleaned = 0.00335891 Jy ! Component: 250 - total flux cleaned = 0.00394655 Jy ! Component: 300 - total flux cleaned = 0.00448432 Jy ! Component: 350 - total flux cleaned = 0.00498496 Jy ! Component: 400 - total flux cleaned = 0.00545551 Jy ! Component: 450 - total flux cleaned = 0.00590065 Jy ! Component: 500 - total flux cleaned = 0.00632323 Jy ! Component: 550 - total flux cleaned = 0.00672491 Jy ! Component: 600 - total flux cleaned = 0.00710708 Jy ! Component: 650 - total flux cleaned = 0.00747085 Jy ! Component: 700 - total flux cleaned = 0.00781714 Jy ! Component: 750 - total flux cleaned = 0.00814683 Jy ! Component: 800 - total flux cleaned = 0.0084609 Jy ! Component: 850 - total flux cleaned = 0.00876007 Jy ! Component: 900 - total flux cleaned = 0.00904508 Jy ! Component: 950 - total flux cleaned = 0.00931668 Jy ! Component: 1000 - total flux cleaned = 0.0095756 Jy ! Component: 1050 - total flux cleaned = 0.00982246 Jy ! Component: 1100 - total flux cleaned = 0.0100579 Jy ! Component: 1150 - total flux cleaned = 0.0102824 Jy ! Component: 1200 - total flux cleaned = 0.0104967 Jy ! Total flux subtracted in 1200 components = 0.0104967 Jy ! Clean residual min=-0.002081 max=0.001861 Jy/beam ! Clean residual mean=0.000009 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.0437538 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help uncalib selfcal ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 154 components and 0.0437539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032445Jy sigma=0.681167 ! Fit after self-cal, rms=0.030046Jy sigma=0.624120 selfcal true,true,1.e6 ! Performing amp+phase self-cal over 1e+06 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.030046Jy sigma=0.624120 ! Fit after self-cal, rms=0.027479Jy sigma=0.609691 clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.036269Jy sigma=0.858683 ! Fit after self-cal, rms=0.036269Jy sigma=0.858683 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.23 mas, bmaj=3.282 mas, bpa=-50.3 degrees ! Estimated noise=1.3074 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00892061 Jy ! Component: 100 - total flux cleaned = 0.0143224 Jy ! Component: 150 - total flux cleaned = 0.0176466 Jy ! Component: 200 - total flux cleaned = 0.020137 Jy ! Component: 250 - total flux cleaned = 0.02218 Jy ! Component: 300 - total flux cleaned = 0.0239648 Jy ! Component: 350 - total flux cleaned = 0.0255575 Jy ! Component: 400 - total flux cleaned = 0.0269821 Jy ! Component: 450 - total flux cleaned = 0.0282594 Jy ! Component: 500 - total flux cleaned = 0.0294089 Jy ! Component: 550 - total flux cleaned = 0.0304487 Jy ! Component: 600 - total flux cleaned = 0.0313924 Jy ! Component: 650 - total flux cleaned = 0.0322515 Jy ! Component: 700 - total flux cleaned = 0.0330362 Jy ! Component: 750 - total flux cleaned = 0.0337554 Jy ! Component: 800 - total flux cleaned = 0.0344194 Jy ! Total flux subtracted in 800 components = 0.0344194 Jy ! Clean residual min=-0.002718 max=0.002431 Jy/beam ! Clean residual mean=0.000012 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.0344194 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 71 model components to the UV plane model. ! The established model now contains 71 components and 0.0344194 Jy ! Inverting map and beam ! Estimated beam: bmin=2.643 mas, bmaj=3.317 mas, bpa=-43.77 degrees ! Estimated noise=0.664551 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105353 Jy ! Component: 100 - total flux cleaned = 0.00184116 Jy ! Component: 150 - total flux cleaned = 0.00251112 Jy ! Component: 200 - total flux cleaned = 0.00310755 Jy ! Component: 250 - total flux cleaned = 0.00365435 Jy ! Component: 300 - total flux cleaned = 0.0041586 Jy ! Component: 350 - total flux cleaned = 0.00462506 Jy ! Component: 400 - total flux cleaned = 0.0050583 Jy ! Component: 450 - total flux cleaned = 0.00546304 Jy ! Component: 500 - total flux cleaned = 0.00584267 Jy ! Component: 550 - total flux cleaned = 0.00619924 Jy ! Component: 600 - total flux cleaned = 0.00653438 Jy ! Component: 650 - total flux cleaned = 0.00684969 Jy ! Component: 700 - total flux cleaned = 0.00714672 Jy ! Component: 750 - total flux cleaned = 0.00742692 Jy ! Component: 800 - total flux cleaned = 0.00769153 Jy ! Component: 850 - total flux cleaned = 0.00794159 Jy ! Component: 900 - total flux cleaned = 0.00817796 Jy ! Component: 950 - total flux cleaned = 0.00840155 Jy ! Component: 1000 - total flux cleaned = 0.00861318 Jy ! Component: 1050 - total flux cleaned = 0.00881353 Jy ! Component: 1100 - total flux cleaned = 0.00900325 Jy ! Component: 1150 - total flux cleaned = 0.00918291 Jy ! Component: 1200 - total flux cleaned = 0.00933967 Jy ! Total flux subtracted in 1200 components = 0.00933967 Jy ! Clean residual min=-0.001580 max=0.002044 Jy/beam ! Clean residual mean=0.000004 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.0437591 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help levs=1.563,3.125,6.25,12.5,25.0,50.0 mapcol color ! Mapplot colormap: rainbow, contrast: 1 brightness: 0.5. mapl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.643 x 3.317 at -43.77 degrees (North through East) ! Clean map min=-0.0015797 max=0.022197 Jy/beam ! Clean map min=-0.0015797 max=0.023197 Jy/beam ! ! Move the cursor into the plot window and press 'H' for help mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. uvaver e8 ! Syntax error in line: ! uvaver e8 ! ^ ! Unable to identify keyword "e8" ! uvavver 8 ! Syntax error in line: ! uvavver 8 ! ^ ! Unable to identify keyword "uvavver" ! uvaver 8 ! Averaging into 8 second bins. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 uncalib selfcal ! Performing phase self-cal ! Adding 161 model components to the UV plane model. ! The established model now contains 161 components and 0.0437591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.021445Jy sigma=0.632132 ! Fit after self-cal, rms=0.021504Jy sigma=0.630056 selfcal true,true,1.e6 ! Performing amp+phase self-cal over 1e+06 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.021504Jy sigma=0.630056 ! Fit after self-cal, rms=0.021485Jy sigma=0.629469 uc2 ! Syntax error in line: ! uc2 ! ^ ! Unable to identify keyword "uc2" ! uncalib selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.021485Jy sigma=0.629469 ! Fit after self-cal, rms=0.021499Jy sigma=0.629449 selfcal true,true,10. ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.021499Jy sigma=0.629449 ! Fit after self-cal, rms=0.021534Jy sigma=0.629447 proj ! Using default options string "m3" ! Move the cursor into the plot window and press 'H' for help ! Applying 5 buffered edits. clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.031231Jy sigma=1.042205 ! Fit after self-cal, rms=0.031231Jy sigma=1.042205 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.241 mas, bmaj=3.282 mas, bpa=-50.1 degrees ! Estimated noise=1.31506 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0085807 Jy ! Component: 100 - total flux cleaned = 0.0137865 Jy ! Component: 150 - total flux cleaned = 0.0170285 Jy ! Component: 200 - total flux cleaned = 0.0195035 Jy ! Component: 250 - total flux cleaned = 0.0215457 Jy ! Component: 300 - total flux cleaned = 0.0233377 Jy ! Component: 350 - total flux cleaned = 0.0249298 Jy ! Component: 400 - total flux cleaned = 0.0263491 Jy ! Component: 450 - total flux cleaned = 0.0276182 Jy ! Component: 500 - total flux cleaned = 0.0287556 Jy ! Component: 550 - total flux cleaned = 0.0297769 Jy ! Component: 600 - total flux cleaned = 0.0306982 Jy ! Component: 650 - total flux cleaned = 0.0315322 Jy ! Component: 700 - total flux cleaned = 0.0322936 Jy ! Component: 750 - total flux cleaned = 0.0329955 Jy ! Component: 800 - total flux cleaned = 0.0336461 Jy ! Component: 850 - total flux cleaned = 0.0342524 Jy ! Component: 900 - total flux cleaned = 0.0348213 Jy ! Component: 950 - total flux cleaned = 0.0353571 Jy ! Component: 1000 - total flux cleaned = 0.0358624 Jy ! Component: 1050 - total flux cleaned = 0.0363395 Jy ! Component: 1100 - total flux cleaned = 0.0367904 Jy ! Component: 1150 - total flux cleaned = 0.0372165 Jy ! Component: 1200 - total flux cleaned = 0.0376195 Jy ! Total flux subtracted in 1200 components = 0.0376195 Jy ! Clean residual min=-0.001957 max=0.002136 Jy/beam ! Clean residual mean=0.000008 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.0376195 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 2000, 0.01 ! Adding 104 model components to the UV plane model. ! The established model now contains 104 components and 0.0376195 Jy ! Inverting map and beam ! Estimated beam: bmin=2.661 mas, bmaj=3.322 mas, bpa=-43.53 degrees ! Estimated noise=0.649816 mJy/beam. ! clean: niter=2000 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000832831 Jy ! Component: 100 - total flux cleaned = 0.00146918 Jy ! Component: 150 - total flux cleaned = 0.00200213 Jy ! Component: 200 - total flux cleaned = 0.00229495 Jy ! Component: 250 - total flux cleaned = 0.00263285 Jy ! Component: 300 - total flux cleaned = 0.00297507 Jy ! Component: 350 - total flux cleaned = 0.00329347 Jy ! Component: 400 - total flux cleaned = 0.00359083 Jy ! Component: 450 - total flux cleaned = 0.00387033 Jy ! Component: 500 - total flux cleaned = 0.00410026 Jy ! Component: 550 - total flux cleaned = 0.00430746 Jy ! Component: 600 - total flux cleaned = 0.00451437 Jy ! Component: 650 - total flux cleaned = 0.00471045 Jy ! Component: 700 - total flux cleaned = 0.00488732 Jy ! Component: 750 - total flux cleaned = 0.0050734 Jy ! Component: 800 - total flux cleaned = 0.00524181 Jy ! Component: 850 - total flux cleaned = 0.00539443 Jy ! Component: 900 - total flux cleaned = 0.00554758 Jy ! Component: 950 - total flux cleaned = 0.00570063 Jy ! Component: 1000 - total flux cleaned = 0.0058258 Jy ! Component: 1050 - total flux cleaned = 0.00592569 Jy ! Component: 1100 - total flux cleaned = 0.00602145 Jy ! Component: 1150 - total flux cleaned = 0.00610119 Jy ! Component: 1200 - total flux cleaned = 0.00616026 Jy ! Component: 1250 - total flux cleaned = 0.00621725 Jy ! Component: 1300 - total flux cleaned = 0.00625033 Jy ! Component: 1350 - total flux cleaned = 0.00630369 Jy ! Component: 1400 - total flux cleaned = 0.00633971 Jy ! Component: 1450 - total flux cleaned = 0.00637471 Jy ! Component: 1500 - total flux cleaned = 0.00640384 Jy ! Component: 1550 - total flux cleaned = 0.00645086 Jy ! Component: 1600 - total flux cleaned = 0.00647367 Jy ! Component: 1650 - total flux cleaned = 0.00649597 Jy ! Component: 1700 - total flux cleaned = 0.00652638 Jy ! Component: 1750 - total flux cleaned = 0.00655173 Jy ! Component: 1800 - total flux cleaned = 0.00657639 Jy ! Component: 1850 - total flux cleaned = 0.00659647 Jy ! Component: 1900 - total flux cleaned = 0.00661993 Jy ! Component: 1950 - total flux cleaned = 0.00664278 Jy ! Component: 2000 - total flux cleaned = 0.00666131 Jy ! Total flux subtracted in 2000 components = 0.00666131 Jy ! Clean residual min=-0.001708 max=0.001786 Jy/beam ! Clean residual mean=0.000001 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.0442808 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help ! Note that 100 components lie outside the plot. clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.031231Jy sigma=1.042205 ! Fit after self-cal, rms=0.031231Jy sigma=1.042205 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.241 mas, bmaj=3.282 mas, bpa=-50.1 degrees ! Estimated noise=1.31506 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0085807 Jy ! Component: 100 - total flux cleaned = 0.0137865 Jy ! Component: 150 - total flux cleaned = 0.0170285 Jy ! Component: 200 - total flux cleaned = 0.0195035 Jy ! Component: 250 - total flux cleaned = 0.0215457 Jy ! Component: 300 - total flux cleaned = 0.0233377 Jy ! Component: 350 - total flux cleaned = 0.0249298 Jy ! Component: 400 - total flux cleaned = 0.0263491 Jy ! Component: 450 - total flux cleaned = 0.0276182 Jy ! Component: 500 - total flux cleaned = 0.0287556 Jy ! Component: 550 - total flux cleaned = 0.0297769 Jy ! Component: 600 - total flux cleaned = 0.0306982 Jy ! Component: 650 - total flux cleaned = 0.0315322 Jy ! Component: 700 - total flux cleaned = 0.0322935 Jy ! Component: 750 - total flux cleaned = 0.0329946 Jy ! Component: 800 - total flux cleaned = 0.0336433 Jy ! Component: 850 - total flux cleaned = 0.034247 Jy ! Component: 900 - total flux cleaned = 0.0348128 Jy ! Component: 950 - total flux cleaned = 0.0353452 Jy ! Component: 1000 - total flux cleaned = 0.0358467 Jy ! Component: 1050 - total flux cleaned = 0.0363196 Jy ! Component: 1100 - total flux cleaned = 0.0367658 Jy ! Component: 1150 - total flux cleaned = 0.037187 Jy ! Component: 1200 - total flux cleaned = 0.0375849 Jy ! Total flux subtracted in 1200 components = 0.0375849 Jy ! Clean residual min=-0.001976 max=0.002152 Jy/beam ! Clean residual mean=0.000007 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.0375849 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 2000, 0.01 ! Adding 106 model components to the UV plane model. ! The established model now contains 106 components and 0.0375849 Jy ! Inverting map and beam ! Estimated beam: bmin=2.661 mas, bmaj=3.322 mas, bpa=-43.53 degrees ! Estimated noise=0.649816 mJy/beam. ! clean: niter=2000 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000783146 Jy ! Component: 100 - total flux cleaned = 0.00140437 Jy ! Component: 150 - total flux cleaned = 0.00193621 Jy ! Component: 200 - total flux cleaned = 0.00239644 Jy ! Component: 250 - total flux cleaned = 0.00280194 Jy ! Component: 300 - total flux cleaned = 0.00313897 Jy ! Component: 350 - total flux cleaned = 0.00340801 Jy ! Component: 400 - total flux cleaned = 0.00367071 Jy ! Component: 450 - total flux cleaned = 0.00392737 Jy ! Component: 500 - total flux cleaned = 0.00416752 Jy ! Component: 550 - total flux cleaned = 0.0043829 Jy ! Component: 600 - total flux cleaned = 0.00459503 Jy ! Component: 650 - total flux cleaned = 0.00478536 Jy ! Component: 700 - total flux cleaned = 0.00496459 Jy ! Component: 750 - total flux cleaned = 0.00513326 Jy ! Component: 800 - total flux cleaned = 0.00528474 Jy ! Component: 850 - total flux cleaned = 0.00543486 Jy ! Component: 900 - total flux cleaned = 0.00556979 Jy ! Component: 950 - total flux cleaned = 0.00569735 Jy ! Component: 1000 - total flux cleaned = 0.00581786 Jy ! Component: 1050 - total flux cleaned = 0.00593171 Jy ! Component: 1100 - total flux cleaned = 0.0060181 Jy ! Component: 1150 - total flux cleaned = 0.00610023 Jy ! Component: 1200 - total flux cleaned = 0.00617366 Jy ! Component: 1250 - total flux cleaned = 0.00624374 Jy ! Component: 1300 - total flux cleaned = 0.00631505 Jy ! Component: 1350 - total flux cleaned = 0.00637877 Jy ! Component: 1400 - total flux cleaned = 0.00643564 Jy ! Component: 1450 - total flux cleaned = 0.00648625 Jy ! Component: 1500 - total flux cleaned = 0.00653475 Jy ! Component: 1550 - total flux cleaned = 0.00657764 Jy ! Component: 1600 - total flux cleaned = 0.00660871 Jy ! Component: 1650 - total flux cleaned = 0.0066288 Jy ! Component: 1700 - total flux cleaned = 0.00665169 Jy ! Component: 1750 - total flux cleaned = 0.0066645 Jy ! Component: 1800 - total flux cleaned = 0.00667706 Jy ! Component: 1850 - total flux cleaned = 0.0066894 Jy ! Component: 1900 - total flux cleaned = 0.00669851 Jy ! Component: 1950 - total flux cleaned = 0.00671343 Jy ! Component: 2000 - total flux cleaned = 0.00672804 Jy ! Total flux subtracted in 2000 components = 0.00672804 Jy ! Clean residual min=-0.001730 max=0.001968 Jy/beam ! Clean residual mean=0.000000 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.044313 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help ! Note that 89 components lie outside the plot. uncalib selfcal ! Performing phase self-cal ! Adding 85 model components to the UV plane model. ! The established model now contains 190 components and 0.0443129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.020727Jy sigma=0.626291 ! Fit after self-cal, rms=0.020670Jy sigma=0.625174 selfcal true,true,10. ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.020670Jy sigma=0.625174 ! Fit after self-cal, rms=0.020435Jy sigma=0.624820 x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map and beam ! Estimated beam: bmin=2.636 mas, bmaj=3.335 mas, bpa=-44.28 degrees ! Estimated noise=0.643708 mJy/beam. ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00019257 Jy ! Component: 100 - total flux cleaned = 0.000144065 Jy ! Component: 150 - total flux cleaned = 0.0001019 Jy ! Component: 200 - total flux cleaned = 4.40694e-05 Jy ! Component: 250 - total flux cleaned = 2.67507e-05 Jy ! Component: 300 - total flux cleaned = -2.25053e-05 Jy ! Component: 350 - total flux cleaned = -8.37854e-05 Jy ! Component: 400 - total flux cleaned = -0.000154952 Jy ! Component: 450 - total flux cleaned = -0.000236281 Jy ! Component: 500 - total flux cleaned = -0.000327003 Jy ! Component: 550 - total flux cleaned = -0.00042544 Jy ! Component: 600 - total flux cleaned = -0.000495897 Jy ! Component: 650 - total flux cleaned = -0.000585603 Jy ! Component: 700 - total flux cleaned = -0.000649775 Jy ! Component: 750 - total flux cleaned = -0.00071118 Jy ! Component: 800 - total flux cleaned = -0.000740491 Jy ! Component: 850 - total flux cleaned = -0.00077825 Jy ! Component: 900 - total flux cleaned = -0.000823365 Jy ! Component: 950 - total flux cleaned = -0.000884829 Jy ! Component: 1000 - total flux cleaned = -0.000944693 Jy ! Component: 1050 - total flux cleaned = -0.00101076 Jy ! Component: 1100 - total flux cleaned = -0.00109089 Jy ! Component: 1150 - total flux cleaned = -0.00116066 Jy ! Component: 1200 - total flux cleaned = -0.00121328 Jy ! Component: 1250 - total flux cleaned = -0.00122753 Jy ! Component: 1300 - total flux cleaned = -0.00125586 Jy ! Component: 1350 - total flux cleaned = -0.00126284 Jy ! Component: 1400 - total flux cleaned = -0.0012898 Jy ! Component: 1450 - total flux cleaned = -0.00131585 Jy ! Component: 1500 - total flux cleaned = -0.00132211 Jy ! Component: 1550 - total flux cleaned = -0.00133454 Jy ! Component: 1600 - total flux cleaned = -0.00133481 Jy ! Component: 1650 - total flux cleaned = -0.00135835 Jy ! Component: 1700 - total flux cleaned = -0.00135822 Jy ! Component: 1750 - total flux cleaned = -0.00135825 Jy ! Component: 1800 - total flux cleaned = -0.00134729 Jy ! Component: 1850 - total flux cleaned = -0.00135804 Jy ! Component: 1900 - total flux cleaned = -0.00134757 Jy ! Component: 1950 - total flux cleaned = -0.00135265 Jy ! Component: 2000 - total flux cleaned = -0.00134255 Jy ! Component: 2050 - total flux cleaned = -0.00134745 Jy ! Component: 2100 - total flux cleaned = -0.00132804 Jy ! Component: 2150 - total flux cleaned = -0.00130428 Jy ! Component: 2200 - total flux cleaned = -0.00128561 Jy ! Component: 2250 - total flux cleaned = -0.00127634 Jy ! Component: 2300 - total flux cleaned = -0.00125816 Jy ! Component: 2350 - total flux cleaned = -0.00124474 Jy ! Component: 2400 - total flux cleaned = -0.00122271 Jy ! Component: 2450 - total flux cleaned = -0.00120977 Jy ! Component: 2500 - total flux cleaned = -0.00118841 Jy ! Component: 2550 - total flux cleaned = -0.00117577 Jy ! Component: 2600 - total flux cleaned = -0.00115911 Jy ! Component: 2650 - total flux cleaned = -0.00113455 Jy ! Component: 2700 - total flux cleaned = -0.00111437 Jy ! Component: 2750 - total flux cleaned = -0.00109848 Jy ! Component: 2800 - total flux cleaned = -0.0010827 Jy ! Component: 2850 - total flux cleaned = -0.00106331 Jy ! Component: 2900 - total flux cleaned = -0.00104797 Jy ! Component: 2950 - total flux cleaned = -0.00103285 Jy ! Component: 3000 - total flux cleaned = -0.00101416 Jy ! Component: 3050 - total flux cleaned = -0.000999425 Jy ! Component: 3100 - total flux cleaned = -0.000981216 Jy ! Component: 3150 - total flux cleaned = -0.000963241 Jy ! Component: 3200 - total flux cleaned = -0.000949042 Jy ! Component: 3250 - total flux cleaned = -0.000934995 Jy ! Component: 3300 - total flux cleaned = -0.000914183 Jy ! Component: 3350 - total flux cleaned = -0.000900471 Jy ! Component: 3400 - total flux cleaned = -0.000880177 Jy ! Component: 3450 - total flux cleaned = -0.000870141 Jy ! Component: 3500 - total flux cleaned = -0.000860189 Jy ! Component: 3550 - total flux cleaned = -0.000843765 Jy ! Component: 3600 - total flux cleaned = -0.000824314 Jy ! Component: 3650 - total flux cleaned = -0.000814692 Jy ! Component: 3700 - total flux cleaned = -0.000801932 Jy ! Component: 3750 - total flux cleaned = -0.000783012 Jy ! Component: 3800 - total flux cleaned = -0.000767427 Jy ! Component: 3850 - total flux cleaned = -0.000748883 Jy ! Component: 3900 - total flux cleaned = -0.000736614 Jy ! Component: 3950 - total flux cleaned = -0.000715372 Jy ! Component: 4000 - total flux cleaned = -0.000703343 Jy ! Component: 4050 - total flux cleaned = -0.00068548 Jy ! Total flux subtracted in 4096 components = -0.000679572 Jy ! Clean residual min=-0.000439 max=0.000393 Jy/beam ! Clean residual mean=-0.000000 rms=0.000092 Jy/beam ! Combined flux in latest and established models = 0.0436334 Jy levs=1.563,3.125,6.25,12.5,25.0,50.0 mapcol color ! Mapplot colormap: rainbow, contrast: 1 brightness: 0.5. mapl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.636 x 3.335 at -44.28 degrees (North through East) ! Clean map min=-0.00043425 max=0.022855 Jy/beam ! Clean map min=-0.0014235 max=0.022855 Jy/beam ! ! Move the cursor into the plot window and press 'H' for help mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. save J0227+7109_X ! Writing UV FITS file: J0227+7109_X.uvf ! Writing 439 model components to file: J0227+7109_X.mod ! wwins: Wrote 8 windows to J0227+7109_X.win ! Adding 249 model components to the UV plane model. ! The established model now contains 439 components and 0.0436333 Jy ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.636 x 3.335 at -44.28 degrees (North through East) ! Clean map min=-0.0014147 max=0.022854 Jy/beam ! Writing clean map to FITS file: J0227+7109_X.fits ! Writing difmap environment to: J0227+7109_X.par quit ! Quitting program ! Log file difmap.log_25 closed on Thu Jan 23 11:42:10 2020