! Started logfile: difmap.log_146 on Sat Feb 1 22:25:50 2020 ![@/tmp/difmap__15848.1] ! Obeying initialization file: /tmp/difmap__15848.1 ![@/home/lpetrov/config/difmap.cnf] device /XW ! Attempting to open device: '/XW' vflags="fb3" integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float taper_size taper_size = 70. integer field_size field_size = 1024 float field_cell field_cell = 0.1 float old_peak float new_peak float flux_cutoff ![Exited script file: /home/lpetrov/config/difmap.cnf] ![@/tmp/difmap__15848.2] ![Exited script file: /tmp/difmap__15848.2] obs J1033+4116_X_uva.fits ! Reading UV FITS file: J1033+4116_X_uva.fits ! AN table 1: 15 integrations on 10 of 10 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1033+4116 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 67 lines of history. ! ! Reading 1200 visibilities. ![Exited script file: /tmp/difmap__15848.1] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clrmod true,true clean 200, 0.02 ! clean: No data stream selected yet. ! clean: Use the 'select' command to select a data stream. ! Error occured in command: clean ! sele I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 field_size=1024 field_cell=0.1 taper_size = 70. mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=1.588688Jy sigma=25.070852 ! Fit after self-cal, rms=0.383487Jy sigma=6.144633 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. radplot ! Using default options string "m1" ! Move the cursor into the plot window and press 'H' for help uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clrmod true,true clean 200, 0.02 ! Inverting map and beam ! Estimated beam: bmin=2.104 mas, bmaj=4.886 mas, bpa=-66.84 degrees ! Estimated noise=1.48957 mJy/beam. ! clean: niter=200 gain=0.02 cutoff=0 ! Component: 050 - total flux cleaned = 0.867385 Jy ! Component: 100 - total flux cleaned = 1.18326 Jy ! Component: 150 - total flux cleaned = 1.26804 Jy ! Component: 200 - total flux cleaned = 1.32049 Jy ! Total flux subtracted in 200 components = 1.32049 Jy ! Clean residual min=-0.074798 max=0.075234 Jy/beam ! Clean residual mean=0.000495 rms=0.040372 Jy/beam ! Combined flux in latest and established models = 1.32049 Jy mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=1.351785Jy sigma=21.634195 ! Fit after self-cal, rms=1.351785Jy sigma=21.634195 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.104 mas, bmaj=4.886 mas, bpa=-66.84 degrees ! Estimated noise=1.48957 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.538842 Jy ! Component: 100 - total flux cleaned = 0.864844 Jy ! Component: 150 - total flux cleaned = 1.06208 Jy ! Component: 200 - total flux cleaned = 1.1814 Jy ! Component: 250 - total flux cleaned = 1.25364 Jy ! Component: 300 - total flux cleaned = 1.30305 Jy ! Component: 350 - total flux cleaned = 1.34208 Jy ! Component: 400 - total flux cleaned = 1.37343 Jy ! Component: 450 - total flux cleaned = 1.39898 Jy ! Component: 500 - total flux cleaned = 1.41984 Jy ! Component: 550 - total flux cleaned = 1.4369 Jy ! Component: 600 - total flux cleaned = 1.45087 Jy ! Component: 650 - total flux cleaned = 1.4623 Jy ! Component: 700 - total flux cleaned = 1.47165 Jy ! Component: 750 - total flux cleaned = 1.47931 Jy ! Component: 800 - total flux cleaned = 1.48557 Jy ! Total flux subtracted in 800 components = 1.48557 Jy ! Clean residual min=-0.089991 max=0.120221 Jy/beam ! Clean residual mean=0.000286 rms=0.038226 Jy/beam ! Combined flux in latest and established models = 1.48558 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 1.48558 Jy ! Inverting map and beam ! Estimated beam: bmin=2.13 mas, bmaj=5.266 mas, bpa=-63.43 degrees ! Estimated noise=1.27724 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00928456 Jy ! Component: 100 - total flux cleaned = -0.0161729 Jy ! Component: 150 - total flux cleaned = -0.0217536 Jy ! Component: 200 - total flux cleaned = -0.0263896 Jy ! Component: 250 - total flux cleaned = -0.0302723 Jy ! Component: 300 - total flux cleaned = -0.0322999 Jy ! Component: 350 - total flux cleaned = -0.0330658 Jy ! Component: 400 - total flux cleaned = -0.0336892 Jy ! Component: 450 - total flux cleaned = -0.0345423 Jy ! Component: 500 - total flux cleaned = -0.035255 Jy ! Component: 550 - total flux cleaned = -0.0359502 Jy ! Component: 600 - total flux cleaned = -0.036629 Jy ! Component: 650 - total flux cleaned = -0.0372912 Jy ! Component: 700 - total flux cleaned = -0.0379377 Jy ! Component: 750 - total flux cleaned = -0.0385685 Jy ! Component: 800 - total flux cleaned = -0.039186 Jy ! Component: 850 - total flux cleaned = -0.0397895 Jy ! Component: 900 - total flux cleaned = -0.0403786 Jy ! Component: 950 - total flux cleaned = -0.0410496 Jy ! Component: 1000 - total flux cleaned = -0.0416091 Jy ! Component: 1050 - total flux cleaned = -0.042158 Jy ! Component: 1100 - total flux cleaned = -0.0426943 Jy ! Component: 1150 - total flux cleaned = -0.043304 Jy ! Component: 1200 - total flux cleaned = -0.0438147 Jy ! Total flux subtracted in 1200 components = -0.0438147 Jy ! Clean residual min=-0.068241 max=0.109220 Jy/beam ! Clean residual mean=0.000157 rms=0.029910 Jy/beam ! Combined flux in latest and established models = 1.44176 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=1.351785Jy sigma=21.634195 ! Fit after self-cal, rms=1.351785Jy sigma=21.634195 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.104 mas, bmaj=4.886 mas, bpa=-66.84 degrees ! Estimated noise=1.48957 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.538842 Jy ! Component: 100 - total flux cleaned = 0.864844 Jy ! Component: 150 - total flux cleaned = 1.06208 Jy ! Component: 200 - total flux cleaned = 1.1814 Jy ! Component: 250 - total flux cleaned = 1.25364 Jy ! Component: 300 - total flux cleaned = 1.30305 Jy ! Component: 350 - total flux cleaned = 1.34206 Jy ! Component: 400 - total flux cleaned = 1.37301 Jy ! Component: 450 - total flux cleaned = 1.3976 Jy ! Component: 500 - total flux cleaned = 1.41716 Jy ! Component: 550 - total flux cleaned = 1.43272 Jy ! Component: 600 - total flux cleaned = 1.4451 Jy ! Component: 650 - total flux cleaned = 1.45495 Jy ! Component: 700 - total flux cleaned = 1.46279 Jy ! Component: 750 - total flux cleaned = 1.46903 Jy ! Component: 800 - total flux cleaned = 1.474 Jy ! Total flux subtracted in 800 components = 1.474 Jy ! Clean residual min=-0.091313 max=0.123935 Jy/beam ! Clean residual mean=0.000309 rms=0.039485 Jy/beam ! Combined flux in latest and established models = 1.474 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 1.474 Jy ! Inverting map and beam ! Estimated beam: bmin=2.13 mas, bmaj=5.266 mas, bpa=-63.43 degrees ! Estimated noise=1.27724 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00689123 Jy ! Component: 100 - total flux cleaned = -0.0123586 Jy ! Component: 150 - total flux cleaned = -0.0167426 Jy ! Component: 200 - total flux cleaned = -0.0202631 Jy ! Component: 250 - total flux cleaned = -0.0230903 Jy ! Component: 300 - total flux cleaned = -0.0253607 Jy ! Component: 350 - total flux cleaned = -0.027184 Jy ! Component: 400 - total flux cleaned = -0.0286481 Jy ! Component: 450 - total flux cleaned = -0.0295649 Jy ! Component: 500 - total flux cleaned = -0.0298251 Jy ! Component: 550 - total flux cleaned = -0.0300727 Jy ! Component: 600 - total flux cleaned = -0.0303084 Jy ! Component: 650 - total flux cleaned = -0.0305334 Jy ! Component: 700 - total flux cleaned = -0.030713 Jy ! Component: 750 - total flux cleaned = -0.030919 Jy ! Component: 800 - total flux cleaned = -0.031115 Jy ! Component: 850 - total flux cleaned = -0.0313024 Jy ! Component: 900 - total flux cleaned = -0.0314809 Jy ! Component: 950 - total flux cleaned = -0.0316237 Jy ! Component: 1000 - total flux cleaned = -0.0317883 Jy ! Component: 1050 - total flux cleaned = -0.0319203 Jy ! Component: 1100 - total flux cleaned = -0.0320474 Jy ! Component: 1150 - total flux cleaned = -0.0321707 Jy ! Component: 1200 - total flux cleaned = -0.03229 Jy ! Total flux subtracted in 1200 components = -0.03229 Jy ! Clean residual min=-0.078458 max=0.109233 Jy/beam ! Clean residual mean=0.000168 rms=0.031035 Jy/beam ! Combined flux in latest and established models = 1.44171 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help uncalib selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 30 components and 1.44171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.155805Jy sigma=2.446460 ! Fit after self-cal, rms=0.155708Jy sigma=2.444981 selfcal true,true,1.e6 ! Performing amp+phase self-cal over 1e+06 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.155708Jy sigma=2.444981 ! Fit after self-cal, rms=0.050669Jy sigma=0.761011 clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=1.350649Jy sigma=21.634195 ! Fit after self-cal, rms=1.350649Jy sigma=21.634195 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.127 mas, bmaj=4.786 mas, bpa=-67.08 degrees ! Estimated noise=1.47391 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.533177 Jy ! Component: 100 - total flux cleaned = 0.855753 Jy ! Component: 150 - total flux cleaned = 1.05091 Jy ! Component: 200 - total flux cleaned = 1.16899 Jy ! Component: 250 - total flux cleaned = 1.24046 Jy ! Component: 300 - total flux cleaned = 1.28454 Jy ! Component: 350 - total flux cleaned = 1.31692 Jy ! Component: 400 - total flux cleaned = 1.34218 Jy ! Component: 450 - total flux cleaned = 1.36199 Jy ! Component: 500 - total flux cleaned = 1.37754 Jy ! Component: 550 - total flux cleaned = 1.38975 Jy ! Component: 600 - total flux cleaned = 1.39933 Jy ! Component: 650 - total flux cleaned = 1.40686 Jy ! Component: 700 - total flux cleaned = 1.41277 Jy ! Component: 750 - total flux cleaned = 1.4174 Jy ! Component: 800 - total flux cleaned = 1.42105 Jy ! Total flux subtracted in 800 components = 1.42105 Jy ! Clean residual min=-0.014499 max=0.015162 Jy/beam ! Clean residual mean=0.000038 rms=0.005262 Jy/beam ! Combined flux in latest and established models = 1.42105 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 1.42105 Jy ! Inverting map and beam ! Estimated beam: bmin=2.14 mas, bmaj=5.091 mas, bpa=-63.75 degrees ! Estimated noise=1.27044 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187553 Jy ! Component: 100 - total flux cleaned = 0.00316717 Jy ! Component: 150 - total flux cleaned = 0.00419965 Jy ! Component: 200 - total flux cleaned = 0.00502498 Jy ! Component: 250 - total flux cleaned = 0.00568471 Jy ! Component: 300 - total flux cleaned = 0.00617407 Jy ! Component: 350 - total flux cleaned = 0.00628522 Jy ! Component: 400 - total flux cleaned = 0.00638952 Jy ! Component: 450 - total flux cleaned = 0.00648699 Jy ! Component: 500 - total flux cleaned = 0.00657869 Jy ! Component: 550 - total flux cleaned = 0.00667813 Jy ! Component: 600 - total flux cleaned = 0.00674478 Jy ! Component: 650 - total flux cleaned = 0.00683209 Jy ! Component: 700 - total flux cleaned = 0.00685587 Jy ! Component: 750 - total flux cleaned = 0.00687956 Jy ! Component: 800 - total flux cleaned = 0.00690258 Jy ! Component: 850 - total flux cleaned = 0.00691401 Jy ! Component: 900 - total flux cleaned = 0.00693668 Jy ! Component: 950 - total flux cleaned = 0.00694779 Jy ! Component: 1000 - total flux cleaned = 0.00696999 Jy ! Component: 1050 - total flux cleaned = 0.0069808 Jy ! Component: 1100 - total flux cleaned = 0.00700221 Jy ! Component: 1150 - total flux cleaned = 0.00702355 Jy ! Component: 1200 - total flux cleaned = 0.00703385 Jy ! Total flux subtracted in 1200 components = 0.00703385 Jy ! Clean residual min=-0.013810 max=0.013709 Jy/beam ! Clean residual mean=0.000001 rms=0.004488 Jy/beam ! Combined flux in latest and established models = 1.42808 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help cma[ ! Syntax error in line: ! cma[ ! ^ ! Unable to identify keyword "cma" ! x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000497341 Jy ! Component: 100 - total flux cleaned = -0.000318513 Jy ! Component: 150 - total flux cleaned = 0.000560858 Jy ! Component: 200 - total flux cleaned = 7.38336e-05 Jy ! Component: 250 - total flux cleaned = -0.000361856 Jy ! Component: 300 - total flux cleaned = -0.000756528 Jy ! Component: 350 - total flux cleaned = -0.00084361 Jy ! Component: 400 - total flux cleaned = -0.00051739 Jy ! Component: 450 - total flux cleaned = -0.000368024 Jy ! Component: 500 - total flux cleaned = -9.23417e-05 Jy ! Component: 550 - total flux cleaned = 0.000164992 Jy ! Component: 600 - total flux cleaned = 0.000287723 Jy ! Component: 650 - total flux cleaned = 0.000463187 Jy ! Component: 700 - total flux cleaned = 0.000630364 Jy ! Component: 750 - total flux cleaned = 0.000896853 Jy ! Component: 800 - total flux cleaned = 0.00110212 Jy ! Component: 850 - total flux cleaned = 0.00130151 Jy ! Component: 900 - total flux cleaned = 0.00139826 Jy ! Component: 950 - total flux cleaned = 0.00149341 Jy ! Component: 1000 - total flux cleaned = 0.00158666 Jy ! Component: 1050 - total flux cleaned = 0.00167662 Jy ! Component: 1100 - total flux cleaned = 0.00185251 Jy ! Component: 1150 - total flux cleaned = 0.00202351 Jy ! Component: 1200 - total flux cleaned = 0.00219124 Jy ! Component: 1250 - total flux cleaned = 0.00239722 Jy ! Component: 1300 - total flux cleaned = 0.00259993 Jy ! Component: 1350 - total flux cleaned = 0.00279973 Jy ! Component: 1400 - total flux cleaned = 0.00299619 Jy ! Component: 1450 - total flux cleaned = 0.00311285 Jy ! Component: 1500 - total flux cleaned = 0.00315159 Jy ! Component: 1550 - total flux cleaned = 0.00319007 Jy ! Component: 1600 - total flux cleaned = 0.00322834 Jy ! Component: 1650 - total flux cleaned = 0.00318852 Jy ! Component: 1700 - total flux cleaned = 0.00322926 Jy ! Component: 1750 - total flux cleaned = 0.00322972 Jy ! Component: 1800 - total flux cleaned = 0.00318686 Jy ! Component: 1850 - total flux cleaned = 0.00323296 Jy ! Component: 1900 - total flux cleaned = 0.00323345 Jy ! Component: 1950 - total flux cleaned = 0.00323461 Jy ! Component: 2000 - total flux cleaned = 0.0032363 Jy ! Component: 2050 - total flux cleaned = 0.00323689 Jy ! Component: 2100 - total flux cleaned = 0.00323643 Jy ! Component: 2150 - total flux cleaned = 0.00323687 Jy ! Component: 2200 - total flux cleaned = 0.00329711 Jy ! Component: 2250 - total flux cleaned = 0.00323923 Jy ! Component: 2300 - total flux cleaned = 0.00330129 Jy ! Component: 2350 - total flux cleaned = 0.00330226 Jy ! Component: 2400 - total flux cleaned = 0.0032362 Jy ! Component: 2450 - total flux cleaned = 0.00330674 Jy ! Component: 2500 - total flux cleaned = 0.00330852 Jy ! Component: 2550 - total flux cleaned = 0.00330814 Jy ! Component: 2600 - total flux cleaned = 0.00330815 Jy ! Component: 2650 - total flux cleaned = 0.00330919 Jy ! Component: 2700 - total flux cleaned = 0.00330858 Jy ! Component: 2750 - total flux cleaned = 0.00339354 Jy ! Component: 2800 - total flux cleaned = 0.00339495 Jy ! Component: 2850 - total flux cleaned = 0.00330413 Jy ! Component: 2900 - total flux cleaned = 0.0034009 Jy ! Component: 2950 - total flux cleaned = 0.00340169 Jy ! Component: 3000 - total flux cleaned = 0.00340111 Jy ! Component: 3050 - total flux cleaned = 0.00340062 Jy ! Component: 3100 - total flux cleaned = 0.00340124 Jy ! Component: 3150 - total flux cleaned = 0.00340145 Jy ! Component: 3200 - total flux cleaned = 0.00351881 Jy ! Component: 3250 - total flux cleaned = 0.00339586 Jy ! Component: 3300 - total flux cleaned = 0.00352131 Jy ! Component: 3350 - total flux cleaned = 0.00339151 Jy ! Component: 3400 - total flux cleaned = 0.00339239 Jy ! Component: 3450 - total flux cleaned = 0.00339355 Jy ! Component: 3500 - total flux cleaned = 0.00339375 Jy ! Component: 3550 - total flux cleaned = 0.00354489 Jy ! Component: 3600 - total flux cleaned = 0.00339485 Jy ! Component: 3650 - total flux cleaned = 0.00323513 Jy ! Component: 3700 - total flux cleaned = 0.00323254 Jy ! Component: 3750 - total flux cleaned = 0.00323538 Jy ! Component: 3800 - total flux cleaned = 0.00305772 Jy ! Component: 3850 - total flux cleaned = 0.00287106 Jy ! Component: 3900 - total flux cleaned = 0.00287084 Jy ! Component: 3950 - total flux cleaned = 0.0028744 Jy ! Component: 4000 - total flux cleaned = 0.00288045 Jy ! Component: 4050 - total flux cleaned = 0.00267118 Jy ! Total flux subtracted in 4096 components = 0.00245407 Jy ! Clean residual min=-0.012068 max=0.011259 Jy/beam ! Clean residual mean=0.000004 rms=0.003368 Jy/beam ! Combined flux in latest and established models = 1.43053 Jy levs=1.563,3.125,6.25,12.5,25.0,50.0 mapcol color ! Mapplot colormap: rainbow, contrast: 1 brightness: 0.5. mapl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.14 x 5.091 at -63.75 degrees (North through East) ! Clean map min=-0.012068 max=1.3429 Jy/beam ! Clean map min=-0.053638 max=1.3449 Jy/beam ! ! Move the cursor into the plot window and press 'H' for help mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. levs=1.563,3.125,6.25,12.5,25.0,50.0 mapcol color ! Mapplot colormap: rainbow, contrast: 1 brightness: 0.5. mapl cln ! ! Move the cursor into the plot window and press 'H' for help mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (512),0.01 ! Adding 198 model components to the UV plane model. ! The established model now contains 216 components and 1.43053 Jy ! Inverting map ! clean: niter=512 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.21043e-05 Jy ! Component: 100 - total flux cleaned = 3.90994e-05 Jy ! Component: 150 - total flux cleaned = 5.20705e-05 Jy ! Component: 200 - total flux cleaned = 6.22882e-05 Jy ! Component: 250 - total flux cleaned = 7.04958e-05 Jy ! Component: 300 - total flux cleaned = 7.71799e-05 Jy ! Component: 350 - total flux cleaned = 0.000331222 Jy ! Component: 400 - total flux cleaned = 0.000330241 Jy ! Component: 450 - total flux cleaned = 0.000329596 Jy ! Component: 500 - total flux cleaned = 0.000328827 Jy ! Total flux subtracted in 512 components = 0.000328823 Jy ! Clean residual min=-0.006988 max=0.006976 Jy/beam ! Clean residual mean=0.000017 rms=0.002017 Jy/beam ! Combined flux in latest and established models = 1.43086 Jy levs=1.563,3.125,6.25,12.5,25.0,50.0 mapcol color ! Mapplot colormap: rainbow, contrast: 1 brightness: 0.5. mapl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.14 x 5.091 at -63.75 degrees (North through East) ! Clean map min=-0.035627 max=1.3458 Jy/beam ! Clean map min=-0.016772 max=1.3458 Jy/beam ! ! Move the cursor into the plot window and press 'H' for help mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. save J1033+4116_X ! Writing UV FITS file: J1033+4116_X.uvf ! Writing 230 model components to file: J1033+4116_X.mod ! wwins: Wrote 7 windows to J1033+4116_X.win ! Adding 14 model components to the UV plane model. ! The established model now contains 221 components and 1.43086 Jy ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.14 x 5.091 at -63.75 degrees (North through East) ! Clean map min=-0.026947 max=1.3458 Jy/beam ! Writing clean map to FITS file: J1033+4116_X.fits ! Writing difmap environment to: J1033+4116_X.par quit ! Quitting program ! Log file difmap.log_146 closed on Sat Feb 1 22:26:36 2020