! Started logfile: .//J2126-3818_C_dfm.log on Mon Jan 20 19:13:44 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     .//J2126-3818_C_uva.fits
! Reading UV FITS file: .//J2126-3818_C_uva.fits
! AN table 1: 15 integrations on 10 of 10 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J2126-3818
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 85 lines of history.
! 
! Reading 1200 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J2126-3818_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=1.003664Jy  sigma=11.540463
! Fit after  self-cal, rms=0.953971Jy  sigma=10.930638
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.166 mas, bmaj=57.49 mas, bpa=-20.5 degrees
! Estimated noise=3.16866 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0390324 Jy
! Component: 100  -  total flux cleaned = 0.0465163 Jy
! Total flux subtracted in 100 components = 0.0465163 Jy
! Clean residual min=-0.003863 max=0.003840 Jy/beam
! Clean residual mean=-0.000080 rms=0.001487 Jy/beam
! Combined flux in latest and established models = 0.0465163 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0465163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.057631Jy  sigma=0.604961
! Fit after  self-cal, rms=0.056533Jy  sigma=0.593746
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.222 mas, bmaj=54.77 mas, bpa=-20.37 degrees
! Estimated noise=1.8247 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00333574 Jy
! Component: 100  -  total flux cleaned = -0.00553743 Jy
! Component: 150  -  total flux cleaned = -0.00666181 Jy
! Component: 200  -  total flux cleaned = -0.00750375 Jy
! Total flux subtracted in 200 components = -0.00750375 Jy
! Clean residual min=-0.001713 max=0.001728 Jy/beam
! Clean residual mean=-0.000014 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 0.0390126 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 65 components and 0.0390126 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.056125Jy  sigma=0.588542
! Fit after  self-cal, rms=0.055922Jy  sigma=0.587383
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.222 x 54.77 at -20.37 degrees (North through East)
! Clean map  min=-0.0047127  max=0.046792 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     KP        0.87     LA        0.84     NL        1.06     
!   PT        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     KP        0.88     LA        1.03     NL        1.01     
!   PT        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     KP        1.22     LA        0.91     NL        0.89     
!   PT        0.87     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     KP        0.86     LA        1.09     NL        1.04     
!   PT        1.07     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.22     KP        0.99     LA        0.92     NL        0.96     
!   PT        0.92     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.83     KP        0.96     LA        1.19     NL        1.06     
!   PT        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     KP        0.89     LA        1.10     NL        1.06     
!   PT        1.08     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.06     KP        1.07     LA        1.05     NL        0.86     
!   PT        0.93     
! 
! 
! Fit before self-cal, rms=0.055922Jy  sigma=0.587383
! Fit after  self-cal, rms=0.054284Jy  sigma=0.582348
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.211 mas, bmaj=55.19 mas, bpa=-20.36 degrees
! Estimated noise=1.75832 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013058 Jy
! Component: 100  -  total flux cleaned = 0.00224862 Jy
! Component: 150  -  total flux cleaned = 0.00308923 Jy
! Component: 200  -  total flux cleaned = 0.00365619 Jy
! Total flux subtracted in 200 components = 0.00365619 Jy
! Clean residual min=-0.001163 max=0.001170 Jy/beam
! Clean residual mean=-0.000015 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.0426688 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 117 components and 0.0426688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.054065Jy  sigma=0.579829
! Fit after  self-cal, rms=0.054170Jy  sigma=0.578585
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.054170Jy  sigma=0.578585
! Fit after  self-cal, rms=0.053759Jy  sigma=0.578169
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.221 mas, bmaj=55.51 mas, bpa=-20.35 degrees
! Estimated noise=1.72993 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00194506 Jy
! Component: 100  -  total flux cleaned = 0.00223161 Jy
! Component: 150  -  total flux cleaned = 0.00265376 Jy
! Component: 200  -  total flux cleaned = 0.00276191 Jy
! Total flux subtracted in 200 components = 0.00276191 Jy
! Clean residual min=-0.000882 max=0.000883 Jy/beam
! Clean residual mean=-0.000006 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.0454307 Jy
selfcal
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 157 components and 0.0454307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053598Jy  sigma=0.576374
! Fit after  self-cal, rms=0.053583Jy  sigma=0.575971
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000825789 Jy
! Component: 100  -  total flux cleaned = 0.000824072 Jy
! Component: 150  -  total flux cleaned = 0.000723073 Jy
! Component: 200  -  total flux cleaned = 0.000394188 Jy
! Total flux subtracted in 200 components = 0.000394188 Jy
! Clean residual min=-0.000754 max=0.000757 Jy/beam
! Clean residual mean=-0.000007 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.0458249 Jy
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 213 components and 0.0458249 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053468Jy  sigma=0.574721
! Fit after  self-cal, rms=0.053405Jy  sigma=0.574484
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053405Jy  sigma=0.574484
! Fit after  self-cal, rms=0.052925Jy  sigma=0.574222
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.215 mas, bmaj=55.77 mas, bpa=-20.34 degrees
! Estimated noise=1.71345 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00146212 Jy
! Component: 100  -  total flux cleaned = 0.0019383 Jy
! Component: 150  -  total flux cleaned = 0.00220847 Jy
! Component: 200  -  total flux cleaned = 0.00258025 Jy
! Total flux subtracted in 200 components = 0.00258025 Jy
! Clean residual min=-0.000659 max=0.000664 Jy/beam
! Clean residual mean=-0.000004 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.0484051 Jy
selfcal
! Performing phase self-cal
! Adding 88 model components to the UV plane model.
! The established model now contains 286 components and 0.0484051 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052826Jy  sigma=0.573154
! Fit after  self-cal, rms=0.052783Jy  sigma=0.572921
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000448761 Jy
! Component: 100  -  total flux cleaned = 0.000539179 Jy
! Component: 150  -  total flux cleaned = 0.00041574 Jy
! Component: 200  -  total flux cleaned = 0.000298784 Jy
! Total flux subtracted in 200 components = 0.000298784 Jy
! Clean residual min=-0.000638 max=0.000642 Jy/beam
! Clean residual mean=-0.000004 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.0487039 Jy
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 339 components and 0.0487039 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052713Jy  sigma=0.572134
! Fit after  self-cal, rms=0.052684Jy  sigma=0.572028
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052684Jy  sigma=0.572028
! Fit after  self-cal, rms=0.052746Jy  sigma=0.571873
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.932 mas, bmaj=53.98 mas, bpa=-20.34 degrees
! Estimated noise=1.67676 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000707597 Jy
! Component: 100  -  total flux cleaned = 0.00123036 Jy
! Component: 150  -  total flux cleaned = 0.00165444 Jy
! Component: 200  -  total flux cleaned = 0.00171423 Jy
! Total flux subtracted in 200 components = 0.00171423 Jy
! Clean residual min=-0.000464 max=0.000471 Jy/beam
! Clean residual mean=-0.000001 rms=0.000208 Jy/beam
! Combined flux in latest and established models = 0.0504181 Jy
selfcal
! Performing phase self-cal
! Adding 80 model components to the UV plane model.
! The established model now contains 408 components and 0.0504182 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052689Jy  sigma=0.571298
! Fit after  self-cal, rms=0.052661Jy  sigma=0.571157
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000116388 Jy
! Component: 100  -  total flux cleaned = 0.000212785 Jy
! Component: 150  -  total flux cleaned = 0.000154358 Jy
! Component: 200  -  total flux cleaned = 9.73158e-05 Jy
! Total flux subtracted in 200 components = 9.73158e-05 Jy
! Clean residual min=-0.000468 max=0.000471 Jy/beam
! Clean residual mean=-0.000004 rms=0.000201 Jy/beam
! Combined flux in latest and established models = 0.0505155 Jy
! Performing phase self-cal
! Adding 76 model components to the UV plane model.
! The established model now contains 461 components and 0.0505155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052621Jy  sigma=0.570681
! Fit after  self-cal, rms=0.052604Jy  sigma=0.570618
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.219 mas, bmaj=55.92 mas, bpa=-20.35 degrees
! Estimated noise=1.70691 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.219 x 55.92 at -20.35 degrees (North through East)
! Clean map  min=-0.0052121  max=0.044876 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.173 mas, bmaj=58.36 mas, bpa=-20.48 degrees
! Estimated noise=3.00853 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0349135 Jy
! Component: 100  -  total flux cleaned = 0.037125 Jy
! Component: 150  -  total flux cleaned = 0.0384079 Jy
! Component: 200  -  total flux cleaned = 0.0404576 Jy
! Total flux subtracted in 200 components = 0.0404576 Jy
! Clean residual min=-0.003452 max=0.003511 Jy/beam
! Clean residual mean=-0.000034 rms=0.001493 Jy/beam
! Combined flux in latest and established models = 0.0404576 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 64 model components to the UV plane model.
! The established model now contains 64 components and 0.0404576 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.219 mas, bmaj=55.92 mas, bpa=-20.35 degrees
! Estimated noise=1.70691 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00144584 Jy
! Component: 100  -  total flux cleaned = -0.00297194 Jy
! Component: 150  -  total flux cleaned = -0.00363722 Jy
! Component: 200  -  total flux cleaned = -0.00469896 Jy
! Total flux subtracted in 200 components = -0.00469896 Jy
! Clean residual min=-0.001918 max=0.001903 Jy/beam
! Clean residual mean=-0.000022 rms=0.000709 Jy/beam
! Combined flux in latest and established models = 0.0357587 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 123 components and 0.0357587 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.932 mas, bmaj=53.98 mas, bpa=-20.34 degrees
! Estimated noise=1.67676 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000428377 Jy
! Component: 100  -  total flux cleaned = 0.000424641 Jy
! Component: 150  -  total flux cleaned = 0.00105389 Jy
! Component: 200  -  total flux cleaned = 0.00164314 Jy
! Total flux subtracted in 200 components = 0.00164314 Jy
! Clean residual min=-0.001076 max=0.001059 Jy/beam
! Clean residual mean=-0.000001 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.0374018 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.00536e-05 Jy
! Component: 100  -  total flux cleaned = 0.000377574 Jy
! Component: 150  -  total flux cleaned = 0.000656348 Jy
! Component: 200  -  total flux cleaned = 0.000899417 Jy
! Total flux subtracted in 200 components = 0.000899417 Jy
! Clean residual min=-0.001426 max=0.001380 Jy/beam
! Clean residual mean=-0.000001 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.0383012 Jy
! Adding 110 model components to the UV plane model.
! The established model now contains 230 components and 0.0383012 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.219 mas, bmaj=55.92 mas, bpa=-20.35 degrees
! Estimated noise=1.70691 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00186985 Jy
! Component: 100  -  total flux cleaned = -0.00257794 Jy
! Component: 150  -  total flux cleaned = -0.00338981 Jy
! Component: 200  -  total flux cleaned = -0.00392585 Jy
! Total flux subtracted in 200 components = -0.00392585 Jy
! Clean residual min=-0.000867 max=0.000864 Jy/beam
! Clean residual mean=-0.000014 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.0343754 Jy
selfcal
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 284 components and 0.0343754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052741Jy  sigma=0.571577
! Fit after  self-cal, rms=0.052696Jy  sigma=0.571211
wmodel J2126-3818_C_map.mod
! Writing 284 model components to file: J2126-3818_C_map.mod
wobs   J2126-3818_C_uvs.fits
! Writing UV FITS file: J2126-3818_C_uvs.fits
wwins  J2126-3818_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J2126-3818_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.219 x 55.92 at -20.35 degrees (North through East)
! Clean map  min=-0.0034184  max=0.042229 Jy/beam
! Writing clean map to FITS file: .//J2126-3818_C_map.fits
wmodel .//J2126-3818_C_map.mod
! Writing 284 model components to file: .//J2126-3818_C_map.mod
wobs   .//J2126-3818_C_uvs.fits
! Writing UV FITS file: .//J2126-3818_C_uvs.fits
wwins  .//J2126-3818_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0422294 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000339987 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.41529 2.41529 4.83057 9.66114 19.3223 38.6446 77.2891
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.042 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  124.208 
quit
! Quitting program
! Log file .//J2126-3818_C_dfm.log closed on Mon Jan 20 19:13:47 2020