! Started logfile: .//J2101+0913_X_dfm.log on Mon Jan 20 19:10:05 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J2101+0913_X_uva.fits
! Reading UV FITS file: .//J2101+0913_X_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.955083 visibilities/baseline/integration-bin.
! Found source: J2101+0913
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 16160 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2101+0913_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001372Jy  sigma=20.250025
! Fit after  self-cal, rms=0.983216Jy  sigma=19.928266
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7661 mas, bmaj=1.966 mas, bpa=4.84 degrees
! Estimated noise=0.610472 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.012737 Jy
! Component: 100  -  total flux cleaned = 0.0156436 Jy
! Total flux subtracted in 100 components = 0.0156436 Jy
! Clean residual min=-0.002153 max=0.002139 Jy/beam
! Clean residual mean=0.000000 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.0156436 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0156436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043536Jy  sigma=0.702345
! Fit after  self-cal, rms=0.041966Jy  sigma=0.663116
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00413327 Jy
! Component: 100  -  total flux cleaned = 0.00540633 Jy
! Total flux subtracted in 100 components = 0.00540633 Jy
! Clean residual min=-0.002245 max=0.002028 Jy/beam
! Clean residual mean=0.000000 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.02105 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 15 components and 0.02105 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041449Jy  sigma=0.656764
! Fit after  self-cal, rms=0.041446Jy  sigma=0.656703
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9741 mas, bmaj=2.248 mas, bpa=3.997 degrees
! Estimated noise=0.281852 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000935568 Jy
! Component: 100  -  total flux cleaned = 0.00124149 Jy
! Component: 150  -  total flux cleaned = 0.00128304 Jy
! Component: 200  -  total flux cleaned = 0.00130468 Jy
! Total flux subtracted in 200 components = 0.00130468 Jy
! Clean residual min=-0.001205 max=0.001114 Jy/beam
! Clean residual mean=0.000001 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.0223546 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 27 components and 0.0223546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041408Jy  sigma=0.656281
! Fit after  self-cal, rms=0.041389Jy  sigma=0.656107
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9741 x 2.248 at 3.997 degrees (North through East)
! Clean map  min=-0.0011697  max=0.020292 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.20     FD        0.98     HN        1.03     KP        1.03     
!   LA        1.10     MK        1.12     NL        0.90     OV        1.31     
!   PT        0.93     SC        0.94     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.04     HN        1.02     KP        1.08     
!   LA        1.12     MK        1.05     NL        0.93     OV        1.08     
!   PT        0.95     SC        1.16     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        0.84     HN        1.01     KP        1.03     
!   LA        0.98     MK        1.06     NL        0.99     OV        1.17     
!   PT        1.03     SC        1.05     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.24     FD        0.98     HN        0.94     KP        1.07     
!   LA        0.93     MK        1.05     NL        0.97     OV        1.06     
!   PT        1.02     SC        1.06     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        0.87     HN        1.07     KP        0.99     
!   LA        0.99     MK        1.12     NL        0.85     OV        1.23     
!   PT        0.87     SC        1.12     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.32     FD        0.93     HN        0.88     KP        1.09     
!   LA        0.98     MK        0.96     NL        0.81     OV        1.20     
!   PT        0.92     SC        1.08     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.98     HN        1.05     KP        1.11     
!   LA        1.03     MK        1.01     NL        0.94     OV        1.14     
!   PT        0.86     SC        1.04     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.10     HN        0.96     KP        1.17     
!   LA        1.02     MK        1.03     NL        0.89     OV        1.20     
!   PT        0.83     SC        0.91     
! 
! 
! Fit before self-cal, rms=0.041389Jy  sigma=0.656107
! Fit after  self-cal, rms=0.043539Jy  sigma=0.653307
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9792 mas, bmaj=2.28 mas, bpa=3.296 degrees
! Estimated noise=0.293796 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000534777 Jy
! Component: 100  -  total flux cleaned = 0.000723253 Jy
! Component: 150  -  total flux cleaned = 0.000744902 Jy
! Component: 200  -  total flux cleaned = 0.000744852 Jy
! Total flux subtracted in 200 components = 0.000744852 Jy
! Clean residual min=-0.000874 max=0.000853 Jy/beam
! Clean residual mean=0.000001 rms=0.000196 Jy/beam
! Combined flux in latest and established models = 0.0230995 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 34 components and 0.0230995 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043510Jy  sigma=0.653353
! Fit after  self-cal, rms=0.043581Jy  sigma=0.652663
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043581Jy  sigma=0.652663
! Fit after  self-cal, rms=0.045671Jy  sigma=0.652471
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9799 mas, bmaj=2.285 mas, bpa=3.138 degrees
! Estimated noise=0.30465 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00066865 Jy
! Component: 100  -  total flux cleaned = 0.000926072 Jy
! Component: 150  -  total flux cleaned = 0.000926356 Jy
! Component: 200  -  total flux cleaned = 0.000926408 Jy
! Total flux subtracted in 200 components = 0.000926408 Jy
! Clean residual min=-0.000922 max=0.000843 Jy/beam
! Clean residual mean=0.000001 rms=0.000202 Jy/beam
! Combined flux in latest and established models = 0.0240259 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 36 components and 0.0240259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045633Jy  sigma=0.652522
! Fit after  self-cal, rms=0.045660Jy  sigma=0.652462
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.95502e-05 Jy
! Component: 100  -  total flux cleaned = 5.28997e-05 Jy
! Component: 150  -  total flux cleaned = 4.68051e-05 Jy
! Component: 200  -  total flux cleaned = 4.11864e-05 Jy
! Total flux subtracted in 200 components = 4.11864e-05 Jy
! Clean residual min=-0.000938 max=0.000851 Jy/beam
! Clean residual mean=0.000001 rms=0.000202 Jy/beam
! Combined flux in latest and established models = 0.0240671 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 38 components and 0.0240671 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045657Jy  sigma=0.652435
! Fit after  self-cal, rms=0.045658Jy  sigma=0.652431
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045658Jy  sigma=0.652431
! Fit after  self-cal, rms=0.047424Jy  sigma=0.652337
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9785 mas, bmaj=2.282 mas, bpa=3.144 degrees
! Estimated noise=0.31551 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000675775 Jy
! Component: 100  -  total flux cleaned = 0.000916171 Jy
! Component: 150  -  total flux cleaned = 0.000942322 Jy
! Component: 200  -  total flux cleaned = 0.000948203 Jy
! Total flux subtracted in 200 components = 0.000948203 Jy
! Clean residual min=-0.000974 max=0.000862 Jy/beam
! Clean residual mean=0.000001 rms=0.000209 Jy/beam
! Combined flux in latest and established models = 0.0250153 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 38 components and 0.0250153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047386Jy  sigma=0.652402
! Fit after  self-cal, rms=0.047392Jy  sigma=0.652396
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.53978e-05 Jy
! Component: 100  -  total flux cleaned = 9.66346e-06 Jy
! Component: 150  -  total flux cleaned = 1.4953e-05 Jy
! Component: 200  -  total flux cleaned = 1.50272e-05 Jy
! Total flux subtracted in 200 components = 1.50272e-05 Jy
! Clean residual min=-0.000979 max=0.000866 Jy/beam
! Clean residual mean=0.000001 rms=0.000209 Jy/beam
! Combined flux in latest and established models = 0.0250303 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 38 components and 0.0250303 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047391Jy  sigma=0.652376
! Fit after  self-cal, rms=0.047391Jy  sigma=0.652374
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047391Jy  sigma=0.652374
! Fit after  self-cal, rms=0.049112Jy  sigma=0.652288
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.025 mas, bmaj=3.267 mas, bpa=-6.07 degrees
! Estimated noise=0.410306 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000776485 Jy
! Component: 100  -  total flux cleaned = 0.00101684 Jy
! Component: 150  -  total flux cleaned = 0.00111921 Jy
! Component: 200  -  total flux cleaned = 0.00114191 Jy
! Total flux subtracted in 200 components = 0.00114191 Jy
! Clean residual min=-0.001047 max=0.001035 Jy/beam
! Clean residual mean=0.000003 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.0261722 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 46 components and 0.0261722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.049079Jy  sigma=0.652392
! Fit after  self-cal, rms=0.049081Jy  sigma=0.652354
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.58028e-05 Jy
! Component: 100  -  total flux cleaned = 2.64032e-05 Jy
! Component: 150  -  total flux cleaned = 3.46626e-05 Jy
! Component: 200  -  total flux cleaned = 4.11245e-05 Jy
! Total flux subtracted in 200 components = 4.11245e-05 Jy
! Clean residual min=-0.001046 max=0.001037 Jy/beam
! Clean residual mean=0.000003 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.0262134 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 47 components and 0.0262134 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.049082Jy  sigma=0.652367
! Fit after  self-cal, rms=0.049080Jy  sigma=0.652356
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.977 mas, bmaj=2.279 mas, bpa=3.173 degrees
! Estimated noise=0.326636 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.977 x 2.279 at 3.173 degrees (North through East)
! Clean map  min=-0.0010414  max=0.023255 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.77 mas, bmaj=1.993 mas, bpa=4.132 degrees
! Estimated noise=0.710041 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0181981 Jy
! Component: 100  -  total flux cleaned = 0.0224835 Jy
! Component: 150  -  total flux cleaned = 0.0240627 Jy
! Component: 200  -  total flux cleaned = 0.0247205 Jy
! Total flux subtracted in 200 components = 0.0247205 Jy
! Clean residual min=-0.002243 max=0.002144 Jy/beam
! Clean residual mean=0.000001 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.0247205 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0247205 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.977 mas, bmaj=2.279 mas, bpa=3.173 degrees
! Estimated noise=0.326636 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.2, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000887496 Jy
! Component: 100  -  total flux cleaned = 0.000919967 Jy
! Component: 150  -  total flux cleaned = 0.000944788 Jy
! Component: 200  -  total flux cleaned = 0.000986503 Jy
! Total flux subtracted in 200 components = 0.000986503 Jy
! Clean residual min=-0.001015 max=0.000887 Jy/beam
! Clean residual mean=0.000001 rms=0.000215 Jy/beam
! Combined flux in latest and established models = 0.025707 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 33 components and 0.025707 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.025 mas, bmaj=3.267 mas, bpa=-6.07 degrees
! Estimated noise=0.410306 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000120496 Jy
! Component: 100  -  total flux cleaned = 0.000147725 Jy
! Component: 150  -  total flux cleaned = 0.00014804 Jy
! Component: 200  -  total flux cleaned = 0.00014801 Jy
! Total flux subtracted in 200 components = 0.00014801 Jy
! Clean residual min=-0.000967 max=0.001073 Jy/beam
! Clean residual mean=0.000002 rms=0.000262 Jy/beam
! Combined flux in latest and established models = 0.025855 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.73328e-06 Jy
! Component: 100  -  total flux cleaned = 1.32729e-05 Jy
! Component: 150  -  total flux cleaned = 1.74083e-05 Jy
! Component: 200  -  total flux cleaned = 2.52829e-05 Jy
! Total flux subtracted in 200 components = 2.52829e-05 Jy
! Clean residual min=-0.000957 max=0.001075 Jy/beam
! Clean residual mean=0.000002 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.0258803 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 58 components and 0.0258803 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.977 mas, bmaj=2.279 mas, bpa=3.173 degrees
! Estimated noise=0.326636 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000161207 Jy
! Component: 100  -  total flux cleaned = -0.000149184 Jy
! Component: 150  -  total flux cleaned = -0.000138672 Jy
! Component: 200  -  total flux cleaned = -0.000118325 Jy
! Total flux subtracted in 200 components = -0.000118325 Jy
! Clean residual min=-0.000965 max=0.000863 Jy/beam
! Clean residual mean=0.000001 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.025762 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 67 components and 0.025762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.049064Jy  sigma=0.652188
! Fit after  self-cal, rms=0.049058Jy  sigma=0.652117
wmodel J2101+0913_X_map.mod
! Writing 67 model components to file: J2101+0913_X_map.mod
wobs   J2101+0913_X_uvs.fits
! Writing UV FITS file: J2101+0913_X_uvs.fits
wwins  J2101+0913_X_map.win
! wwins: Wrote 2 windows to J2101+0913_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -7.33413e-05 Jy
! Component: 100  -  total flux cleaned = -0.000134036 Jy
! Component: 150  -  total flux cleaned = -0.000176225 Jy
! Component: 200  -  total flux cleaned = -0.000176488 Jy
! Component: 250  -  total flux cleaned = -0.000176469 Jy
! Component: 300  -  total flux cleaned = -0.000128403 Jy
! Component: 350  -  total flux cleaned = -7.0579e-05 Jy
! Component: 400  -  total flux cleaned = -3.7058e-05 Jy
! Component: 450  -  total flux cleaned = -1.50382e-05 Jy
! Component: 500  -  total flux cleaned = 2.70051e-05 Jy
! Component: 550  -  total flux cleaned = 4.72307e-05 Jy
! Component: 600  -  total flux cleaned = 5.70259e-05 Jy
! Component: 650  -  total flux cleaned = 5.70063e-05 Jy
! Component: 700  -  total flux cleaned = 8.5191e-05 Jy
! Component: 750  -  total flux cleaned = 0.000103108 Jy
! Component: 800  -  total flux cleaned = 0.000102986 Jy
! Component: 850  -  total flux cleaned = 9.4381e-05 Jy
! Component: 900  -  total flux cleaned = 0.000102956 Jy
! Component: 950  -  total flux cleaned = 7.79374e-05 Jy
! Component: 1000  -  total flux cleaned = 0.000111102 Jy
! Component: 1050  -  total flux cleaned = 9.48185e-05 Jy
! Component: 1100  -  total flux cleaned = 0.000118418 Jy
! Component: 1150  -  total flux cleaned = 7.9147e-05 Jy
! Component: 1200  -  total flux cleaned = 7.1514e-05 Jy
! Component: 1250  -  total flux cleaned = 8.65996e-05 Jy
! Component: 1300  -  total flux cleaned = 9.40111e-05 Jy
! Component: 1350  -  total flux cleaned = 8.6732e-05 Jy
! Component: 1400  -  total flux cleaned = 0.000108507 Jy
! Component: 1450  -  total flux cleaned = 0.000143987 Jy
! Component: 1500  -  total flux cleaned = 0.00013704 Jy
! Component: 1550  -  total flux cleaned = 0.000143963 Jy
! Component: 1600  -  total flux cleaned = 0.000157641 Jy
! Component: 1650  -  total flux cleaned = 0.000197819 Jy
! Component: 1700  -  total flux cleaned = 0.000204439 Jy
! Component: 1750  -  total flux cleaned = 0.000230585 Jy
! Component: 1800  -  total flux cleaned = 0.000249862 Jy
! Component: 1850  -  total flux cleaned = 0.000281608 Jy
! Component: 1900  -  total flux cleaned = 0.00029411 Jy
! Component: 1950  -  total flux cleaned = 0.000319052 Jy
! Component: 2000  -  total flux cleaned = 0.000337475 Jy
! Component: 2050  -  total flux cleaned = 0.000373871 Jy
! Component: 2100  -  total flux cleaned = 0.000391733 Jy
! Component: 2150  -  total flux cleaned = 0.000385813 Jy
! Component: 2200  -  total flux cleaned = 0.000421068 Jy
! Component: 2250  -  total flux cleaned = 0.000438545 Jy
! Component: 2300  -  total flux cleaned = 0.000461512 Jy
! Component: 2350  -  total flux cleaned = 0.000472918 Jy
! Component: 2400  -  total flux cleaned = 0.00049548 Jy
! Component: 2450  -  total flux cleaned = 0.000506686 Jy
! Component: 2500  -  total flux cleaned = 0.000534392 Jy
! Component: 2550  -  total flux cleaned = 0.000550887 Jy
! Component: 2600  -  total flux cleaned = 0.000556294 Jy
! Component: 2650  -  total flux cleaned = 0.000583117 Jy
! Component: 2700  -  total flux cleaned = 0.000588453 Jy
! Component: 2750  -  total flux cleaned = 0.000604299 Jy
! Component: 2800  -  total flux cleaned = 0.000609574 Jy
! Component: 2850  -  total flux cleaned = 0.000625097 Jy
! Component: 2900  -  total flux cleaned = 0.000640513 Jy
! Component: 2950  -  total flux cleaned = 0.000650678 Jy
! Component: 3000  -  total flux cleaned = 0.000640586 Jy
! Component: 3050  -  total flux cleaned = 0.000645638 Jy
! Component: 3100  -  total flux cleaned = 0.0006605 Jy
! Component: 3150  -  total flux cleaned = 0.000680262 Jy
! Component: 3200  -  total flux cleaned = 0.000690009 Jy
! Component: 3250  -  total flux cleaned = 0.00072401 Jy
! Component: 3300  -  total flux cleaned = 0.000719186 Jy
! Component: 3350  -  total flux cleaned = 0.000762295 Jy
! Component: 3400  -  total flux cleaned = 0.000781295 Jy
! Component: 3450  -  total flux cleaned = 0.000786049 Jy
! Component: 3500  -  total flux cleaned = 0.000800191 Jy
! Component: 3550  -  total flux cleaned = 0.000818879 Jy
! Component: 3600  -  total flux cleaned = 0.000837414 Jy
! Component: 3650  -  total flux cleaned = 0.000837405 Jy
! Component: 3700  -  total flux cleaned = 0.000851167 Jy
! Component: 3750  -  total flux cleaned = 0.000878484 Jy
! Component: 3800  -  total flux cleaned = 0.000883021 Jy
! Component: 3850  -  total flux cleaned = 0.000896527 Jy
! Component: 3900  -  total flux cleaned = 0.000905537 Jy
! Component: 3950  -  total flux cleaned = 0.000923424 Jy
! Component: 4000  -  total flux cleaned = 0.000941215 Jy
! Component: 4050  -  total flux cleaned = 0.000950034 Jy
! Total flux subtracted in 4096 components = 0.000972009 Jy
! Clean residual min=-0.000233 max=0.000244 Jy/beam
! Clean residual mean=-0.000000 rms=0.000074 Jy/beam
! Combined flux in latest and established models = 0.026734 Jy
keep
! Adding 269 model components to the UV plane model.
! The established model now contains 336 components and 0.026734 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   .//J2101+0913_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.977 x 2.279 at 3.173 degrees (North through East)
! Clean map  min=-0.00066024  max=0.023387 Jy/beam
! Writing clean map to FITS file: .//J2101+0913_X_map.fits
wmodel .//J2101+0913_X_map.mod
! Writing 336 model components to file: .//J2101+0913_X_map.mod
wobs   .//J2101+0913_X_uvs.fits
! Writing UV FITS file: .//J2101+0913_X_uvs.fits
wwins  .//J2101+0913_X_map.win
! wwins: Wrote 3 windows to .//J2101+0913_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.023387 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 7.24119e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.928874 0.928874 1.85775 3.7155 7.43099 14.862 29.724 59.448
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.023 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  322.971 
quit
! Quitting program
! Log file .//J2101+0913_X_dfm.log closed on Mon Jan 20 19:10:09 2020