! Started logfile: .//J2101+0913_C_dfm.log on Mon Jan 20 19:10:00 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     .//J2101+0913_C_uva.fits
! Reading UV FITS file: .//J2101+0913_C_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.955083 visibilities/baseline/integration-bin.
! Found source: J2101+0913
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 16160 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J2101+0913_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000643Jy  sigma=21.596723
! Fit after  self-cal, rms=0.979381Jy  sigma=21.181931
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.39 mas, bmaj=3.411 mas, bpa=6.93 degrees
! Estimated noise=0.44125 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0153015 Jy
! Component: 100  -  total flux cleaned = 0.0190185 Jy
! Total flux subtracted in 100 components = 0.0190185 Jy
! Clean residual min=-0.001589 max=0.002185 Jy/beam
! Clean residual mean=-0.000002 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.0190185 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0190185 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044314Jy  sigma=0.727163
! Fit after  self-cal, rms=0.042760Jy  sigma=0.681363
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00407987 Jy
! Component: 100  -  total flux cleaned = 0.00518181 Jy
! Total flux subtracted in 100 components = 0.00518181 Jy
! Clean residual min=-0.001364 max=0.001510 Jy/beam
! Clean residual mean=-0.000001 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.0242004 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 13 components and 0.0242004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042247Jy  sigma=0.674128
! Fit after  self-cal, rms=0.042239Jy  sigma=0.674082
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.718 mas, bmaj=3.966 mas, bpa=5.072 degrees
! Estimated noise=0.267053 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000363848 Jy
! Component: 100  -  total flux cleaned = 0.000339202 Jy
! Component: 150  -  total flux cleaned = 0.000328872 Jy
! Component: 200  -  total flux cleaned = 0.000320247 Jy
! Total flux subtracted in 200 components = 0.000320247 Jy
! Clean residual min=-0.000744 max=0.000937 Jy/beam
! Clean residual mean=-0.000000 rms=0.000210 Jy/beam
! Combined flux in latest and established models = 0.0245206 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 23 components and 0.0245206 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042217Jy  sigma=0.674031
! Fit after  self-cal, rms=0.042211Jy  sigma=0.674006
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.718 x 3.966 at 5.072 degrees (North through East)
! Clean map  min=-0.00075516  max=0.023382 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.83     HN        0.93     KP        0.95     
!   LA        0.97     MK        1.08     NL        0.88     OV        0.90     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.94     HN        0.92     KP        0.99     
!   LA        1.01     MK        1.05     NL        0.98     OV        0.99     
!   PT        1.07     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        0.93     KP        1.03     
!   LA        1.03     MK        0.94     NL        1.00     OV        1.15     
!   PT        1.04     SC        0.87     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.05     HN        0.93     KP        1.07     
!   LA        0.96     MK        1.01     NL        0.87     OV        0.95     
!   PT        0.91     SC        1.07     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.07     HN        1.01     KP        1.00     
!   LA        1.08     MK        0.99     NL        0.96     OV        1.07     
!   PT        1.10     SC        1.01     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        1.11     HN        0.93     KP        1.03     
!   LA        1.04     MK        1.03     NL        1.07     OV        1.10     
!   PT        0.97     SC        1.04     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.05     HN        0.98     KP        1.05     
!   LA        0.98     MK        1.04     NL        0.98     OV        1.06     
!   PT        1.02     SC        1.16     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.08     HN        0.99     KP        0.94     
!   LA        1.11     MK        1.04     NL        1.04     OV        1.13     
!   PT        1.07     SC        1.05     
! 
! 
! Fit before self-cal, rms=0.042211Jy  sigma=0.674006
! Fit after  self-cal, rms=0.042572Jy  sigma=0.672320
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.718 mas, bmaj=3.975 mas, bpa=4.614 degrees
! Estimated noise=0.272591 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000436136 Jy
! Component: 100  -  total flux cleaned = 0.000474422 Jy
! Component: 150  -  total flux cleaned = 0.000491481 Jy
! Component: 200  -  total flux cleaned = 0.000510623 Jy
! Total flux subtracted in 200 components = 0.000510623 Jy
! Clean residual min=-0.000754 max=0.000764 Jy/beam
! Clean residual mean=-0.000000 rms=0.000183 Jy/beam
! Combined flux in latest and established models = 0.0250312 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 34 components and 0.0250312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042550Jy  sigma=0.672381
! Fit after  self-cal, rms=0.042569Jy  sigma=0.672179
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042569Jy  sigma=0.672179
! Fit after  self-cal, rms=0.043897Jy  sigma=0.672079
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.719 mas, bmaj=3.976 mas, bpa=4.491 degrees
! Estimated noise=0.280196 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000550548 Jy
! Component: 100  -  total flux cleaned = 0.000639975 Jy
! Component: 150  -  total flux cleaned = 0.000655989 Jy
! Component: 200  -  total flux cleaned = 0.000673994 Jy
! Total flux subtracted in 200 components = 0.000673994 Jy
! Clean residual min=-0.000784 max=0.000799 Jy/beam
! Clean residual mean=-0.000000 rms=0.000188 Jy/beam
! Combined flux in latest and established models = 0.0257052 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 38 components and 0.0257052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043868Jy  sigma=0.672140
! Fit after  self-cal, rms=0.043871Jy  sigma=0.672060
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.25901e-06 Jy
! Component: 100  -  total flux cleaned = 1.23871e-05 Jy
! Component: 150  -  total flux cleaned = 2.45466e-05 Jy
! Component: 200  -  total flux cleaned = 3.27965e-05 Jy
! Total flux subtracted in 200 components = 3.27965e-05 Jy
! Clean residual min=-0.000781 max=0.000786 Jy/beam
! Clean residual mean=-0.000000 rms=0.000187 Jy/beam
! Combined flux in latest and established models = 0.025738 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 46 components and 0.025738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043869Jy  sigma=0.672059
! Fit after  self-cal, rms=0.043869Jy  sigma=0.672052
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043869Jy  sigma=0.672052
! Fit after  self-cal, rms=0.045158Jy  sigma=0.671960
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.719 mas, bmaj=3.978 mas, bpa=4.382 degrees
! Estimated noise=0.288333 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000565458 Jy
! Component: 100  -  total flux cleaned = 0.000685143 Jy
! Component: 150  -  total flux cleaned = 0.000702331 Jy
! Component: 200  -  total flux cleaned = 0.000719421 Jy
! Total flux subtracted in 200 components = 0.000719421 Jy
! Clean residual min=-0.000811 max=0.000812 Jy/beam
! Clean residual mean=-0.000000 rms=0.000193 Jy/beam
! Combined flux in latest and established models = 0.0264574 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 49 components and 0.0264574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045128Jy  sigma=0.672035
! Fit after  self-cal, rms=0.045129Jy  sigma=0.672030
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.22578e-05 Jy
! Component: 100  -  total flux cleaned = 1.49701e-05 Jy
! Component: 150  -  total flux cleaned = 2.31293e-05 Jy
! Component: 200  -  total flux cleaned = 2.80673e-05 Jy
! Total flux subtracted in 200 components = 2.80673e-05 Jy
! Clean residual min=-0.000821 max=0.000812 Jy/beam
! Clean residual mean=-0.000000 rms=0.000192 Jy/beam
! Combined flux in latest and established models = 0.0264855 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 50 components and 0.0264855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045127Jy  sigma=0.672030
! Fit after  self-cal, rms=0.045128Jy  sigma=0.672028
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045128Jy  sigma=0.672028
! Fit after  self-cal, rms=0.046449Jy  sigma=0.671937
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.565 mas, bmaj=5.693 mas, bpa=-5.343 degrees
! Estimated noise=0.371456 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00062259 Jy
! Component: 100  -  total flux cleaned = 0.000782381 Jy
! Component: 150  -  total flux cleaned = 0.000794141 Jy
! Component: 200  -  total flux cleaned = 0.000803766 Jy
! Total flux subtracted in 200 components = 0.000803766 Jy
! Clean residual min=-0.000892 max=0.000910 Jy/beam
! Clean residual mean=-0.000000 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.0272893 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 54 components and 0.0272893 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046421Jy  sigma=0.672023
! Fit after  self-cal, rms=0.046421Jy  sigma=0.672004
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.05258e-05 Jy
! Component: 100  -  total flux cleaned = 1.39519e-05 Jy
! Component: 150  -  total flux cleaned = 1.39134e-05 Jy
! Component: 200  -  total flux cleaned = 1.6745e-05 Jy
! Total flux subtracted in 200 components = 1.6745e-05 Jy
! Clean residual min=-0.000894 max=0.000908 Jy/beam
! Clean residual mean=-0.000000 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.027306 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 54 components and 0.027306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046420Jy  sigma=0.672015
! Fit after  self-cal, rms=0.046420Jy  sigma=0.672008
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.719 mas, bmaj=3.98 mas, bpa=4.292 degrees
! Estimated noise=0.29675 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.719 x 3.98 at 4.292 degrees (North through East)
! Clean map  min=-0.00082431  max=0.025916 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.396 mas, bmaj=3.42 mas, bpa=6.009 degrees
! Estimated noise=0.492907 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0202128 Jy
! Component: 100  -  total flux cleaned = 0.0250797 Jy
! Component: 150  -  total flux cleaned = 0.0267079 Jy
! Component: 200  -  total flux cleaned = 0.0269538 Jy
! Total flux subtracted in 200 components = 0.0269538 Jy
! Clean residual min=-0.001369 max=0.001342 Jy/beam
! Clean residual mean=-0.000000 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.0269538 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0269538 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.719 mas, bmaj=3.98 mas, bpa=4.292 degrees
! Estimated noise=0.29675 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000189192 Jy
! Component: 100  -  total flux cleaned = 0.000201775 Jy
! Component: 150  -  total flux cleaned = 0.000223154 Jy
! Component: 200  -  total flux cleaned = 0.000232047 Jy
! Total flux subtracted in 200 components = 0.000232047 Jy
! Clean residual min=-0.000841 max=0.000866 Jy/beam
! Clean residual mean=-0.000000 rms=0.000201 Jy/beam
! Combined flux in latest and established models = 0.0271858 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 30 components and 0.0271858 Jy
! Inverting map 
! Added new window around map position (76.5, -24.3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000264657 Jy
! Component: 100  -  total flux cleaned = 0.000198533 Jy
! Component: 150  -  total flux cleaned = 0.000246678 Jy
! Component: 200  -  total flux cleaned = 0.000257096 Jy
! Total flux subtracted in 200 components = 0.000257096 Jy
! Clean residual min=-0.000804 max=0.000809 Jy/beam
! Clean residual mean=-0.000000 rms=0.000193 Jy/beam
! Combined flux in latest and established models = 0.0274429 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 44 components and 0.0274429 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.565 mas, bmaj=5.693 mas, bpa=-5.343 degrees
! Estimated noise=0.371456 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.89075e-05 Jy
! Component: 100  -  total flux cleaned = 7.67008e-05 Jy
! Component: 150  -  total flux cleaned = 8.29241e-05 Jy
! Component: 200  -  total flux cleaned = 8.28984e-05 Jy
! Total flux subtracted in 200 components = 8.28984e-05 Jy
! Clean residual min=-0.000860 max=0.000927 Jy/beam
! Clean residual mean=0.000000 rms=0.000235 Jy/beam
! Combined flux in latest and established models = 0.0275258 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.42355e-06 Jy
! Component: 100  -  total flux cleaned = 1.0482e-05 Jy
! Component: 150  -  total flux cleaned = 1.51334e-05 Jy
! Component: 200  -  total flux cleaned = 1.95274e-05 Jy
! Total flux subtracted in 200 components = 1.95274e-05 Jy
! Clean residual min=-0.000856 max=0.000922 Jy/beam
! Clean residual mean=0.000000 rms=0.000234 Jy/beam
! Combined flux in latest and established models = 0.0275453 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 63 components and 0.0275453 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.719 mas, bmaj=3.98 mas, bpa=4.292 degrees
! Estimated noise=0.29675 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.83753e-05 Jy
! Component: 100  -  total flux cleaned = 5.23865e-05 Jy
! Component: 150  -  total flux cleaned = 3.78103e-05 Jy
! Component: 200  -  total flux cleaned = 1.75107e-05 Jy
! Total flux subtracted in 200 components = 1.75107e-05 Jy
! Clean residual min=-0.000808 max=0.000780 Jy/beam
! Clean residual mean=-0.000000 rms=0.000189 Jy/beam
! Combined flux in latest and established models = 0.0275628 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 80 components and 0.0275628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046399Jy  sigma=0.671678
! Fit after  self-cal, rms=0.046396Jy  sigma=0.671554
wmodel J2101+0913_C_map.mod
! Writing 80 model components to file: J2101+0913_C_map.mod
wobs   J2101+0913_C_uvs.fits
! Writing UV FITS file: J2101+0913_C_uvs.fits
wwins  J2101+0913_C_map.win
! wwins: Wrote 2 windows to J2101+0913_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 4.09294e-05 Jy
! Component: 100  -  total flux cleaned = 0.000162509 Jy
! Component: 150  -  total flux cleaned = 0.000263237 Jy
! Component: 200  -  total flux cleaned = 0.000346228 Jy
! Component: 250  -  total flux cleaned = 0.00040283 Jy
! Component: 300  -  total flux cleaned = 0.000457148 Jy
! Component: 350  -  total flux cleaned = 0.000477913 Jy
! Component: 400  -  total flux cleaned = 0.000477795 Jy
! Component: 450  -  total flux cleaned = 0.000448426 Jy
! Component: 500  -  total flux cleaned = 0.000400882 Jy
! Component: 550  -  total flux cleaned = 0.00033613 Jy
! Component: 600  -  total flux cleaned = 0.000272928 Jy
! Component: 650  -  total flux cleaned = 0.000228469 Jy
! Component: 700  -  total flux cleaned = 0.000150149 Jy
! Component: 750  -  total flux cleaned = 9.02885e-05 Jy
! Component: 800  -  total flux cleaned = 3.11978e-05 Jy
! Component: 850  -  total flux cleaned = -5.9918e-05 Jy
! Component: 900  -  total flux cleaned = -0.000108926 Jy
! Component: 950  -  total flux cleaned = -0.000189314 Jy
! Component: 1000  -  total flux cleaned = -0.000268369 Jy
! Component: 1050  -  total flux cleaned = -0.000361959 Jy
! Component: 1100  -  total flux cleaned = -0.000438792 Jy
! Component: 1150  -  total flux cleaned = -0.000529828 Jy
! Component: 1200  -  total flux cleaned = -0.000612208 Jy
! Component: 1250  -  total flux cleaned = -0.000686149 Jy
! Component: 1300  -  total flux cleaned = -0.000759069 Jy
! Component: 1350  -  total flux cleaned = -0.000816685 Jy
! Component: 1400  -  total flux cleaned = -0.000902225 Jy
! Component: 1450  -  total flux cleaned = -0.000944552 Jy
! Component: 1500  -  total flux cleaned = -0.00102118 Jy
! Component: 1550  -  total flux cleaned = -0.00106913 Jy
! Component: 1600  -  total flux cleaned = -0.00112359 Jy
! Component: 1650  -  total flux cleaned = -0.00116399 Jy
! Component: 1700  -  total flux cleaned = -0.0012107 Jy
! Component: 1750  -  total flux cleaned = -0.00126341 Jy
! Component: 1800  -  total flux cleaned = -0.00129604 Jy
! Component: 1850  -  total flux cleaned = -0.00133469 Jy
! Component: 1900  -  total flux cleaned = -0.00136014 Jy
! Component: 1950  -  total flux cleaned = -0.00139166 Jy
! Component: 2000  -  total flux cleaned = -0.00141663 Jy
! Component: 2050  -  total flux cleaned = -0.00145373 Jy
! Component: 2100  -  total flux cleaned = -0.00145985 Jy
! Component: 2150  -  total flux cleaned = -0.00149029 Jy
! Component: 2200  -  total flux cleaned = -0.00152041 Jy
! Component: 2250  -  total flux cleaned = -0.00153835 Jy
! Component: 2300  -  total flux cleaned = -0.00155021 Jy
! Component: 2350  -  total flux cleaned = -0.00156783 Jy
! Component: 2400  -  total flux cleaned = -0.00159696 Jy
! Component: 2450  -  total flux cleaned = -0.00161418 Jy
! Component: 2500  -  total flux cleaned = -0.00165423 Jy
! Component: 2550  -  total flux cleaned = -0.00165991 Jy
! Component: 2600  -  total flux cleaned = -0.00169375 Jy
! Component: 2650  -  total flux cleaned = -0.00169934 Jy
! Component: 2700  -  total flux cleaned = -0.00174921 Jy
! Component: 2750  -  total flux cleaned = -0.00174368 Jy
! Component: 2800  -  total flux cleaned = -0.00174367 Jy
! Component: 2850  -  total flux cleaned = -0.00175454 Jy
! Component: 2900  -  total flux cleaned = -0.00179225 Jy
! Component: 2950  -  total flux cleaned = -0.00178158 Jy
! Component: 3000  -  total flux cleaned = -0.00180278 Jy
! Component: 3050  -  total flux cleaned = -0.00180274 Jy
! Component: 3100  -  total flux cleaned = -0.00180796 Jy
! Component: 3150  -  total flux cleaned = -0.00182881 Jy
! Component: 3200  -  total flux cleaned = -0.00183396 Jy
! Component: 3250  -  total flux cleaned = -0.00184419 Jy
! Component: 3300  -  total flux cleaned = -0.00184933 Jy
! Component: 3350  -  total flux cleaned = -0.00188988 Jy
! Component: 3400  -  total flux cleaned = -0.001915 Jy
! Component: 3450  -  total flux cleaned = -0.00191998 Jy
! Component: 3500  -  total flux cleaned = -0.00194979 Jy
! Component: 3550  -  total flux cleaned = -0.00194973 Jy
! Component: 3600  -  total flux cleaned = -0.001935 Jy
! Component: 3650  -  total flux cleaned = -0.00197409 Jy
! Component: 3700  -  total flux cleaned = -0.00197407 Jy
! Component: 3750  -  total flux cleaned = -0.00198848 Jy
! Component: 3800  -  total flux cleaned = -0.00199328 Jy
! Component: 3850  -  total flux cleaned = -0.00202187 Jy
! Component: 3900  -  total flux cleaned = -0.00204554 Jy
! Component: 3950  -  total flux cleaned = -0.0020691 Jy
! Component: 4000  -  total flux cleaned = -0.00207848 Jy
! Component: 4050  -  total flux cleaned = -0.00209717 Jy
! Total flux subtracted in 4096 components = -0.00209714 Jy
! Clean residual min=-0.000253 max=0.000293 Jy/beam
! Clean residual mean=0.000000 rms=0.000084 Jy/beam
! Combined flux in latest and established models = 0.0254657 Jy
keep
! Adding 304 model components to the UV plane model.
! The established model now contains 384 components and 0.0254657 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   .//J2101+0913_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.719 x 3.98 at 4.292 degrees (North through East)
! Clean map  min=-0.00062353  max=0.025936 Jy/beam
! Writing clean map to FITS file: .//J2101+0913_C_map.fits
wmodel .//J2101+0913_C_map.mod
! Writing 384 model components to file: .//J2101+0913_C_map.mod
wobs   .//J2101+0913_C_uvs.fits
! Writing UV FITS file: .//J2101+0913_C_uvs.fits
wwins  .//J2101+0913_C_map.win
! wwins: Wrote 3 windows to .//J2101+0913_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0259363 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 8.39197e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.970682 0.970682 1.94136 3.88273 7.76546 15.5309 31.0618 62.1237
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.025 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  309.06 
quit
! Quitting program
! Log file .//J2101+0913_C_dfm.log closed on Mon Jan 20 19:10:04 2020