! Started logfile: .//J1807+6429_C_dfm.log on Mon Jan 20 18:43:23 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     .//J1807+6429_C_uva.fits
! Reading UV FITS file: .//J1807+6429_C_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.980615 visibilities/baseline/integration-bin.
! Found source: J1807+6429
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 16592 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J1807+6429_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000434Jy  sigma=23.756980
! Fit after  self-cal, rms=0.981516Jy  sigma=23.296863
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.21 mas, bmaj=5.357 mas, bpa=9.11 degrees
! Estimated noise=0.451329 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0151301 Jy
! Component: 100  -  total flux cleaned = 0.0184418 Jy
! Total flux subtracted in 100 components = 0.0184418 Jy
! Clean residual min=-0.001521 max=0.001466 Jy/beam
! Clean residual mean=0.000000 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.0184418 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.0184418 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032741Jy  sigma=0.747876
! Fit after  self-cal, rms=0.030444Jy  sigma=0.693347
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00375036 Jy
! Component: 100  -  total flux cleaned = 0.00401456 Jy
! Total flux subtracted in 100 components = 0.00401456 Jy
! Clean residual min=-0.001691 max=0.001427 Jy/beam
! Clean residual mean=0.000000 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.0224564 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 5 components and 0.0224564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030100Jy  sigma=0.684166
! Fit after  self-cal, rms=0.030098Jy  sigma=0.684153
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.574 mas, bmaj=5.222 mas, bpa=8.637 degrees
! Estimated noise=0.234455 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.56068e-05 Jy
! Component: 100  -  total flux cleaned = 5.53978e-05 Jy
! Component: 150  -  total flux cleaned = 5.50328e-05 Jy
! Component: 200  -  total flux cleaned = 6.30273e-05 Jy
! Total flux subtracted in 200 components = 6.30273e-05 Jy
! Clean residual min=-0.001130 max=0.000838 Jy/beam
! Clean residual mean=-0.000000 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.0225194 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 34 components and 0.0225194 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030093Jy  sigma=0.683978
! Fit after  self-cal, rms=0.030092Jy  sigma=0.683967
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.574 x 5.222 at 8.637 degrees (North through East)
! Clean map  min=-0.0010788  max=0.023026 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        0.98     KP        1.13     
!   LA        1.02     MK        1.05     NL        0.95     OV        1.06     
!   PT        0.99     SC        0.89     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.08     HN        0.97     KP        0.91     
!   LA        0.92     MK        1.03     NL        0.94     OV        0.94     
!   PT        1.01     SC        1.09     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.06     HN        0.93     KP        1.02     
!   LA        1.01     MK        1.04     NL        0.86     OV        1.00     
!   PT        1.00     SC        0.93     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.19     HN        1.02     KP        1.06     
!   LA        1.00     MK        1.06     NL        0.95     OV        0.97     
!   PT        0.91     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.09     HN        0.90     KP        1.00     
!   LA        1.12     MK        1.05     NL        0.92     OV        0.94     
!   PT        1.01     SC        1.11     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.21     HN        0.95     KP        1.07     
!   LA        1.05     MK        0.88     NL        0.86     OV        1.04     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.10     HN        1.11     KP        0.94     
!   LA        1.04     MK        0.92     NL        0.91     OV        1.12     
!   PT        1.03     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.23     HN        1.04     KP        1.05     
!   LA        1.10     MK        0.86     NL        0.88     OV        0.95     
!   PT        1.01     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.030092Jy  sigma=0.683967
! Fit after  self-cal, rms=0.030438Jy  sigma=0.681676
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.565 mas, bmaj=5.245 mas, bpa=8.477 degrees
! Estimated noise=0.233975 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.52821e-05 Jy
! Component: 100  -  total flux cleaned = 5.41772e-05 Jy
! Component: 150  -  total flux cleaned = 8.11171e-05 Jy
! Component: 200  -  total flux cleaned = 9.89914e-05 Jy
! Total flux subtracted in 200 components = 9.89914e-05 Jy
! Clean residual min=-0.000742 max=0.000661 Jy/beam
! Clean residual mean=-0.000000 rms=0.000175 Jy/beam
! Combined flux in latest and established models = 0.0226184 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 45 components and 0.0226184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030434Jy  sigma=0.681573
! Fit after  self-cal, rms=0.030492Jy  sigma=0.681261
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030492Jy  sigma=0.681261
! Fit after  self-cal, rms=0.030743Jy  sigma=0.681202
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.563 mas, bmaj=5.247 mas, bpa=8.402 degrees
! Estimated noise=0.234845 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.09663e-05 Jy
! Component: 100  -  total flux cleaned = 7.25466e-05 Jy
! Component: 150  -  total flux cleaned = 8.74775e-05 Jy
! Component: 200  -  total flux cleaned = 0.000100827 Jy
! Total flux subtracted in 200 components = 0.000100827 Jy
! Clean residual min=-0.000753 max=0.000681 Jy/beam
! Clean residual mean=-0.000000 rms=0.000175 Jy/beam
! Combined flux in latest and established models = 0.0227192 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 49 components and 0.0227192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030740Jy  sigma=0.681145
! Fit after  self-cal, rms=0.030751Jy  sigma=0.681128
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.48222e-05 Jy
! Component: 100  -  total flux cleaned = 3.47494e-05 Jy
! Component: 150  -  total flux cleaned = 4.2139e-05 Jy
! Component: 200  -  total flux cleaned = 4.89062e-05 Jy
! Total flux subtracted in 200 components = 4.89062e-05 Jy
! Clean residual min=-0.000756 max=0.000690 Jy/beam
! Clean residual mean=-0.000000 rms=0.000175 Jy/beam
! Combined flux in latest and established models = 0.0227681 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 55 components and 0.0227681 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030750Jy  sigma=0.681102
! Fit after  self-cal, rms=0.030751Jy  sigma=0.681100
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030751Jy  sigma=0.681100
! Fit after  self-cal, rms=0.030853Jy  sigma=0.681089
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.562 mas, bmaj=5.245 mas, bpa=8.344 degrees
! Estimated noise=0.235396 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.32244e-05 Jy
! Component: 100  -  total flux cleaned = 9.37977e-05 Jy
! Component: 150  -  total flux cleaned = 0.000103507 Jy
! Component: 200  -  total flux cleaned = 0.000115485 Jy
! Total flux subtracted in 200 components = 0.000115485 Jy
! Clean residual min=-0.000757 max=0.000688 Jy/beam
! Clean residual mean=-0.000000 rms=0.000175 Jy/beam
! Combined flux in latest and established models = 0.0228836 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 59 components and 0.0228836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030852Jy  sigma=0.681065
! Fit after  self-cal, rms=0.030855Jy  sigma=0.681063
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.68406e-05 Jy
! Component: 100  -  total flux cleaned = 3.57606e-05 Jy
! Component: 150  -  total flux cleaned = 4.1238e-05 Jy
! Component: 200  -  total flux cleaned = 4.88408e-05 Jy
! Total flux subtracted in 200 components = 4.88408e-05 Jy
! Clean residual min=-0.000757 max=0.000688 Jy/beam
! Clean residual mean=-0.000000 rms=0.000175 Jy/beam
! Combined flux in latest and established models = 0.0229325 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 62 components and 0.0229325 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030854Jy  sigma=0.681049
! Fit after  self-cal, rms=0.030855Jy  sigma=0.681047
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030855Jy  sigma=0.681047
! Fit after  self-cal, rms=0.030918Jy  sigma=0.681044
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.403 mas, bmaj=5.6 mas, bpa=4.026 degrees
! Estimated noise=0.302064 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000146154 Jy
! Component: 100  -  total flux cleaned = 0.000169217 Jy
! Component: 150  -  total flux cleaned = 0.000195876 Jy
! Component: 200  -  total flux cleaned = 0.000202098 Jy
! Total flux subtracted in 200 components = 0.000202098 Jy
! Clean residual min=-0.000868 max=0.000809 Jy/beam
! Clean residual mean=-0.000001 rms=0.000234 Jy/beam
! Combined flux in latest and established models = 0.0231346 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 68 components and 0.0231346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030919Jy  sigma=0.681090
! Fit after  self-cal, rms=0.030921Jy  sigma=0.681078
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.83698e-06 Jy
! Component: 100  -  total flux cleaned = -2.66833e-06 Jy
! Component: 150  -  total flux cleaned = 5.04789e-08 Jy
! Component: 200  -  total flux cleaned = 2.75113e-06 Jy
! Total flux subtracted in 200 components = 2.75113e-06 Jy
! Clean residual min=-0.000866 max=0.000805 Jy/beam
! Clean residual mean=-0.000001 rms=0.000233 Jy/beam
! Combined flux in latest and established models = 0.0231373 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 70 components and 0.0231373 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030922Jy  sigma=0.681108
! Fit after  self-cal, rms=0.030923Jy  sigma=0.681104
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.561 mas, bmaj=5.241 mas, bpa=8.309 degrees
! Estimated noise=0.235781 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.561 x 5.241 at 8.309 degrees (North through East)
! Clean map  min=-0.00071807  max=0.023036 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.204 mas, bmaj=5.364 mas, bpa=8.811 degrees
! Estimated noise=0.450257 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0180531 Jy
! Component: 100  -  total flux cleaned = 0.0220131 Jy
! Component: 150  -  total flux cleaned = 0.0222041 Jy
! Component: 200  -  total flux cleaned = 0.0223972 Jy
! Total flux subtracted in 200 components = 0.0223972 Jy
! Clean residual min=-0.001262 max=0.001181 Jy/beam
! Clean residual mean=0.000000 rms=0.000318 Jy/beam
! Combined flux in latest and established models = 0.0223972 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0223972 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.561 mas, bmaj=5.241 mas, bpa=8.309 degrees
! Estimated noise=0.235781 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000346181 Jy
! Component: 100  -  total flux cleaned = 0.000463773 Jy
! Component: 150  -  total flux cleaned = 0.000484528 Jy
! Component: 200  -  total flux cleaned = 0.000509816 Jy
! Total flux subtracted in 200 components = 0.000509816 Jy
! Clean residual min=-0.000776 max=0.000669 Jy/beam
! Clean residual mean=-0.000000 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.0229071 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 27 components and 0.0229071 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.403 mas, bmaj=5.6 mas, bpa=4.026 degrees
! Estimated noise=0.302064 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000150914 Jy
! Component: 100  -  total flux cleaned = 0.000164322 Jy
! Component: 150  -  total flux cleaned = 0.000189328 Jy
! Component: 200  -  total flux cleaned = 0.000205064 Jy
! Total flux subtracted in 200 components = 0.000205064 Jy
! Clean residual min=-0.000866 max=0.000823 Jy/beam
! Clean residual mean=-0.000001 rms=0.000236 Jy/beam
! Combined flux in latest and established models = 0.0231121 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.61067e-07 Jy
! Component: 100  -  total flux cleaned = 6.7528e-06 Jy
! Component: 150  -  total flux cleaned = 9.77378e-06 Jy
! Component: 200  -  total flux cleaned = 9.72016e-06 Jy
! Total flux subtracted in 200 components = 9.72016e-06 Jy
! Clean residual min=-0.000864 max=0.000816 Jy/beam
! Clean residual mean=-0.000001 rms=0.000235 Jy/beam
! Combined flux in latest and established models = 0.0231218 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 41 components and 0.0231218 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.561 mas, bmaj=5.241 mas, bpa=8.309 degrees
! Estimated noise=0.235781 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.02798e-05 Jy
! Component: 100  -  total flux cleaned = -0.000123959 Jy
! Component: 150  -  total flux cleaned = -0.000123095 Jy
! Component: 200  -  total flux cleaned = -0.000111053 Jy
! Total flux subtracted in 200 components = -0.000111053 Jy
! Clean residual min=-0.000761 max=0.000678 Jy/beam
! Clean residual mean=-0.000000 rms=0.000175 Jy/beam
! Combined flux in latest and established models = 0.0230108 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 51 components and 0.0230108 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030922Jy  sigma=0.681077
! Fit after  self-cal, rms=0.030919Jy  sigma=0.681067
wmodel J1807+6429_C_map.mod
! Writing 51 model components to file: J1807+6429_C_map.mod
wobs   J1807+6429_C_uvs.fits
! Writing UV FITS file: J1807+6429_C_uvs.fits
wwins  J1807+6429_C_map.win
! wwins: Wrote 1 windows to J1807+6429_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000111825 Jy
! Component: 100  -  total flux cleaned = -0.000134833 Jy
! Component: 150  -  total flux cleaned = -9.09763e-05 Jy
! Component: 200  -  total flux cleaned = -7.02091e-05 Jy
! Component: 250  -  total flux cleaned = -2.02919e-05 Jy
! Component: 300  -  total flux cleaned = 3.76642e-05 Jy
! Component: 350  -  total flux cleaned = 0.000103298 Jy
! Component: 400  -  total flux cleaned = 0.000157831 Jy
! Component: 450  -  total flux cleaned = 0.000184531 Jy
! Component: 500  -  total flux cleaned = 0.000210568 Jy
! Component: 550  -  total flux cleaned = 0.000202024 Jy
! Component: 600  -  total flux cleaned = 0.000210518 Jy
! Component: 650  -  total flux cleaned = 0.000210514 Jy
! Component: 700  -  total flux cleaned = 0.000202475 Jy
! Component: 750  -  total flux cleaned = 0.00020248 Jy
! Component: 800  -  total flux cleaned = 0.000187142 Jy
! Component: 850  -  total flux cleaned = 0.00018719 Jy
! Component: 900  -  total flux cleaned = 0.0001648 Jy
! Component: 950  -  total flux cleaned = 0.000157443 Jy
! Component: 1000  -  total flux cleaned = 0.000164729 Jy
! Component: 1050  -  total flux cleaned = 0.000143311 Jy
! Component: 1100  -  total flux cleaned = 0.000129401 Jy
! Component: 1150  -  total flux cleaned = 0.000129556 Jy
! Component: 1200  -  total flux cleaned = 0.000143376 Jy
! Component: 1250  -  total flux cleaned = 0.000129719 Jy
! Component: 1300  -  total flux cleaned = 0.000136348 Jy
! Component: 1350  -  total flux cleaned = 0.000123021 Jy
! Component: 1400  -  total flux cleaned = 0.000103358 Jy
! Component: 1450  -  total flux cleaned = 9.68331e-05 Jy
! Component: 1500  -  total flux cleaned = 6.48598e-05 Jy
! Component: 1550  -  total flux cleaned = 7.74584e-05 Jy
! Component: 1600  -  total flux cleaned = 5.86519e-05 Jy
! Component: 1650  -  total flux cleaned = 5.86638e-05 Jy
! Component: 1700  -  total flux cleaned = 4.03009e-05 Jy
! Component: 1750  -  total flux cleaned = 4.03368e-05 Jy
! Component: 1800  -  total flux cleaned = 1.02397e-05 Jy
! Component: 1850  -  total flux cleaned = -7.63324e-06 Jy
! Component: 1900  -  total flux cleaned = -3.71591e-05 Jy
! Component: 1950  -  total flux cleaned = -6.05265e-05 Jy
! Component: 2000  -  total flux cleaned = -0.000106939 Jy
! Component: 2050  -  total flux cleaned = -0.000118424 Jy
! Component: 2100  -  total flux cleaned = -0.000158223 Jy
! Component: 2150  -  total flux cleaned = -0.000175124 Jy
! Component: 2200  -  total flux cleaned = -0.000186281 Jy
! Component: 2250  -  total flux cleaned = -0.000197394 Jy
! Component: 2300  -  total flux cleaned = -0.000224914 Jy
! Component: 2350  -  total flux cleaned = -0.00024668 Jy
! Component: 2400  -  total flux cleaned = -0.000279196 Jy
! Component: 2450  -  total flux cleaned = -0.000306034 Jy
! Component: 2500  -  total flux cleaned = -0.000327408 Jy
! Component: 2550  -  total flux cleaned = -0.000364383 Jy
! Component: 2600  -  total flux cleaned = -0.000380089 Jy
! Component: 2650  -  total flux cleaned = -0.000400941 Jy
! Component: 2700  -  total flux cleaned = -0.000431941 Jy
! Component: 2750  -  total flux cleaned = -0.000462692 Jy
! Component: 2800  -  total flux cleaned = -0.000493243 Jy
! Component: 2850  -  total flux cleaned = -0.000513469 Jy
! Component: 2900  -  total flux cleaned = -0.000543562 Jy
! Component: 2950  -  total flux cleaned = -0.000573483 Jy
! Component: 3000  -  total flux cleaned = -0.000603165 Jy
! Component: 3050  -  total flux cleaned = -0.000632644 Jy
! Component: 3100  -  total flux cleaned = -0.000656989 Jy
! Component: 3150  -  total flux cleaned = -0.000671488 Jy
! Component: 3200  -  total flux cleaned = -0.000710015 Jy
! Component: 3250  -  total flux cleaned = -0.000719555 Jy
! Component: 3300  -  total flux cleaned = -0.000743352 Jy
! Component: 3350  -  total flux cleaned = -0.00076694 Jy
! Component: 3400  -  total flux cleaned = -0.000785758 Jy
! Component: 3450  -  total flux cleaned = -0.000804413 Jy
! Component: 3500  -  total flux cleaned = -0.0008183 Jy
! Component: 3550  -  total flux cleaned = -0.00083678 Jy
! Component: 3600  -  total flux cleaned = -0.000859686 Jy
! Component: 3650  -  total flux cleaned = -0.000859679 Jy
! Component: 3700  -  total flux cleaned = -0.000895929 Jy
! Component: 3750  -  total flux cleaned = -0.000891414 Jy
! Component: 3800  -  total flux cleaned = -0.000918329 Jy
! Component: 3850  -  total flux cleaned = -0.000918284 Jy
! Component: 3900  -  total flux cleaned = -0.000931524 Jy
! Component: 3950  -  total flux cleaned = -0.000944753 Jy
! Component: 4000  -  total flux cleaned = -0.00094474 Jy
! Component: 4050  -  total flux cleaned = -0.000953479 Jy
! Total flux subtracted in 4096 components = -0.000970825 Jy
! Clean residual min=-0.000264 max=0.000234 Jy/beam
! Clean residual mean=-0.000000 rms=0.000080 Jy/beam
! Combined flux in latest and established models = 0.02204 Jy
keep
! Adding 311 model components to the UV plane model.
! The established model now contains 362 components and 0.02204 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   .//J1807+6429_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.561 x 5.241 at 8.309 degrees (North through East)
! Clean map  min=-0.00049276  max=0.023037 Jy/beam
! Writing clean map to FITS file: .//J1807+6429_C_map.fits
wmodel .//J1807+6429_C_map.mod
! Writing 362 model components to file: .//J1807+6429_C_map.mod
wobs   .//J1807+6429_C_uvs.fits
! Writing UV FITS file: .//J1807+6429_C_uvs.fits
wwins  .//J1807+6429_C_map.win
! wwins: Wrote 2 windows to .//J1807+6429_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0230372 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 7.90378e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.02926 1.02926 2.05852 4.11704 8.23409 16.4682 32.9364 65.8727
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.023 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  291.471 
quit
! Quitting program
! Log file .//J1807+6429_C_dfm.log closed on Mon Jan 20 18:43:27 2020