! Started logfile: .//J1730-2111_X_dfm.log on Mon Jan 20 18:37:57 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1730-2111_X_uva.fits
! Reading UV FITS file: .//J1730-2111_X_uva.fits
! AN table 1: 17 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.922876 visibilities/baseline/integration-bin.
! Found source: J1730-2111
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 5648 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1730-2111_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001879Jy  sigma=18.482916
! Fit after  self-cal, rms=0.978689Jy  sigma=18.089282
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6888 mas, bmaj=1.999 mas, bpa=-3.297 degrees
! Estimated noise=0.716848 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0161497 Jy
! Component: 100  -  total flux cleaned = 0.0199072 Jy
! Total flux subtracted in 100 components = 0.0199072 Jy
! Clean residual min=-0.002489 max=0.002359 Jy/beam
! Clean residual mean=-0.000000 rms=0.000586 Jy/beam
! Combined flux in latest and established models = 0.0199072 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0199072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047204Jy  sigma=0.723989
! Fit after  self-cal, rms=0.045291Jy  sigma=0.680402
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00428842 Jy
! Component: 100  -  total flux cleaned = 0.00593171 Jy
! Total flux subtracted in 100 components = 0.00593171 Jy
! Clean residual min=-0.002456 max=0.002206 Jy/beam
! Clean residual mean=0.000001 rms=0.000546 Jy/beam
! Combined flux in latest and established models = 0.0258389 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 8 components and 0.0258389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044706Jy  sigma=0.671434
! Fit after  self-cal, rms=0.044674Jy  sigma=0.670821
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8698 mas, bmaj=2.333 mas, bpa=-2.994 degrees
! Estimated noise=0.522075 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127934 Jy
! Component: 100  -  total flux cleaned = 0.00187942 Jy
! Component: 150  -  total flux cleaned = 0.00211428 Jy
! Component: 200  -  total flux cleaned = 0.00215062 Jy
! Total flux subtracted in 200 components = 0.00215062 Jy
! Clean residual min=-0.001878 max=0.001797 Jy/beam
! Clean residual mean=0.000001 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.0279896 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 20 components and 0.0279896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044609Jy  sigma=0.670343
! Fit after  self-cal, rms=0.044607Jy  sigma=0.670267
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8698 x 2.333 at -2.994 degrees (North through East)
! Clean map  min=-0.0017928  max=0.025388 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.94     HN        1.01     KP        0.96     
!   LA        1.43     MK        1.05     NL        0.86     OV        1.27     
!   PT        0.85     SC        1.21     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.00     HN        0.95     KP        0.99     
!   LA        1.04     MK        1.04     NL        0.87     OV        1.18     
!   PT        1.02     SC        0.91     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.89     HN        1.18     KP        0.90     
!   LA        1.10     MK        1.09     NL        1.08     OV        1.15     
!   PT        0.97     SC        0.94     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.25     HN        0.91     KP        1.17     
!   LA        1.06     MK        1.30     NL        0.85     OV        1.05     
!   PT        0.86     SC        0.97     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.94     HN        0.97     KP        0.93     
!   LA        1.01     MK        1.14     NL        0.73     OV        1.30     
!   PT        0.92     SC        1.15     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.95     HN        0.80     KP        1.03     
!   LA        0.92     MK        0.88     NL        0.97     OV        1.12     
!   PT        1.00     SC        1.17     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        0.87     KP        1.01     
!   LA        1.11     MK        0.97     NL        0.91     OV        1.08     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.86     HN        0.85     KP        1.27     
!   LA        0.86     MK        0.98     NL        1.08     OV        1.25     
!   PT        0.97     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.044607Jy  sigma=0.670267
! Fit after  self-cal, rms=0.044102Jy  sigma=0.665986
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8803 mas, bmaj=2.356 mas, bpa=-3.198 degrees
! Estimated noise=0.528512 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000308808 Jy
! Component: 100  -  total flux cleaned = 0.000329041 Jy
! Component: 150  -  total flux cleaned = 0.000347201 Jy
! Component: 200  -  total flux cleaned = 0.000362791 Jy
! Total flux subtracted in 200 components = 0.000362791 Jy
! Clean residual min=-0.001641 max=0.001702 Jy/beam
! Clean residual mean=-0.000000 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.0283524 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 27 components and 0.0283524 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044092Jy  sigma=0.665927
! Fit after  self-cal, rms=0.044142Jy  sigma=0.665246
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044142Jy  sigma=0.665246
! Fit after  self-cal, rms=0.044966Jy  sigma=0.665122
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8809 mas, bmaj=2.359 mas, bpa=-3.179 degrees
! Estimated noise=0.534594 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000356043 Jy
! Component: 100  -  total flux cleaned = 0.000384374 Jy
! Component: 150  -  total flux cleaned = 0.000416955 Jy
! Component: 200  -  total flux cleaned = 0.000444787 Jy
! Total flux subtracted in 200 components = 0.000444787 Jy
! Clean residual min=-0.001724 max=0.001708 Jy/beam
! Clean residual mean=-0.000001 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.0287971 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 30 components and 0.0287971 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044955Jy  sigma=0.665087
! Fit after  self-cal, rms=0.044979Jy  sigma=0.665049
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.18098e-05 Jy
! Component: 100  -  total flux cleaned = 7.13917e-05 Jy
! Component: 150  -  total flux cleaned = 7.11564e-05 Jy
! Component: 200  -  total flux cleaned = 7.68828e-05 Jy
! Total flux subtracted in 200 components = 7.68828e-05 Jy
! Clean residual min=-0.001726 max=0.001698 Jy/beam
! Clean residual mean=-0.000001 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.028874 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 32 components and 0.028874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044976Jy  sigma=0.665017
! Fit after  self-cal, rms=0.044978Jy  sigma=0.665008
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044978Jy  sigma=0.665008
! Fit after  self-cal, rms=0.045497Jy  sigma=0.664972
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8797 mas, bmaj=2.357 mas, bpa=-3.165 degrees
! Estimated noise=0.540644 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000350264 Jy
! Component: 100  -  total flux cleaned = 0.0003905 Jy
! Component: 150  -  total flux cleaned = 0.000417389 Jy
! Component: 200  -  total flux cleaned = 0.00044082 Jy
! Total flux subtracted in 200 components = 0.00044082 Jy
! Clean residual min=-0.001742 max=0.001717 Jy/beam
! Clean residual mean=-0.000001 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.0293148 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 32 components and 0.0293148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045487Jy  sigma=0.664960
! Fit after  self-cal, rms=0.045493Jy  sigma=0.664947
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.96015e-05 Jy
! Component: 100  -  total flux cleaned = 7.56238e-05 Jy
! Component: 150  -  total flux cleaned = 8.0491e-05 Jy
! Component: 200  -  total flux cleaned = 8.52325e-05 Jy
! Total flux subtracted in 200 components = 8.52325e-05 Jy
! Clean residual min=-0.001743 max=0.001712 Jy/beam
! Clean residual mean=-0.000001 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.0294001 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 32 components and 0.0294001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045490Jy  sigma=0.664931
! Fit after  self-cal, rms=0.045491Jy  sigma=0.664925
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045491Jy  sigma=0.664925
! Fit after  self-cal, rms=0.045968Jy  sigma=0.664895
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.129 mas, bmaj=4.872 mas, bpa=1.799 degrees
! Estimated noise=0.697336 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000429192 Jy
! Component: 100  -  total flux cleaned = 0.000554863 Jy
! Component: 150  -  total flux cleaned = 0.000560578 Jy
! Component: 200  -  total flux cleaned = 0.000568338 Jy
! Total flux subtracted in 200 components = 0.000568338 Jy
! Clean residual min=-0.002156 max=0.001873 Jy/beam
! Clean residual mean=-0.000001 rms=0.000536 Jy/beam
! Combined flux in latest and established models = 0.0299684 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 36 components and 0.0299684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045961Jy  sigma=0.664941
! Fit after  self-cal, rms=0.045962Jy  sigma=0.664922
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.7695e-05 Jy
! Component: 100  -  total flux cleaned = 5.16767e-05 Jy
! Component: 150  -  total flux cleaned = 5.50639e-05 Jy
! Component: 200  -  total flux cleaned = 5.82498e-05 Jy
! Total flux subtracted in 200 components = 5.82498e-05 Jy
! Clean residual min=-0.002157 max=0.001856 Jy/beam
! Clean residual mean=-0.000001 rms=0.000536 Jy/beam
! Combined flux in latest and established models = 0.0300267 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 40 components and 0.0300267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045962Jy  sigma=0.664943
! Fit after  self-cal, rms=0.045962Jy  sigma=0.664933
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8779 mas, bmaj=2.354 mas, bpa=-3.192 degrees
! Estimated noise=0.546595 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8779 x 2.354 at -3.192 degrees (North through East)
! Clean map  min=-0.0016259  max=0.025642 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6949 mas, bmaj=2.008 mas, bpa=-3.467 degrees
! Estimated noise=0.766038 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.020088 Jy
! Component: 100  -  total flux cleaned = 0.0253022 Jy
! Component: 150  -  total flux cleaned = 0.0277109 Jy
! Component: 200  -  total flux cleaned = 0.0288152 Jy
! Total flux subtracted in 200 components = 0.0288152 Jy
! Clean residual min=-0.002388 max=0.002383 Jy/beam
! Clean residual mean=-0.000000 rms=0.000545 Jy/beam
! Combined flux in latest and established models = 0.0288152 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0288152 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8779 mas, bmaj=2.354 mas, bpa=-3.192 degrees
! Estimated noise=0.546595 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000704523 Jy
! Component: 100  -  total flux cleaned = 0.00084057 Jy
! Component: 150  -  total flux cleaned = 0.000909137 Jy
! Component: 200  -  total flux cleaned = 0.000966869 Jy
! Total flux subtracted in 200 components = 0.000966869 Jy
! Clean residual min=-0.001771 max=0.001725 Jy/beam
! Clean residual mean=-0.000001 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.0297821 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 19 components and 0.0297821 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.129 mas, bmaj=4.872 mas, bpa=1.799 degrees
! Estimated noise=0.697336 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000200589 Jy
! Component: 100  -  total flux cleaned = 0.000213409 Jy
! Component: 150  -  total flux cleaned = 0.000218344 Jy
! Component: 200  -  total flux cleaned = 0.000226827 Jy
! Total flux subtracted in 200 components = 0.000226827 Jy
! Clean residual min=-0.002175 max=0.001848 Jy/beam
! Clean residual mean=-0.000001 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.0300089 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.42101e-06 Jy
! Component: 100  -  total flux cleaned = 6.59254e-06 Jy
! Component: 150  -  total flux cleaned = 1.26311e-05 Jy
! Component: 200  -  total flux cleaned = 1.55078e-05 Jy
! Total flux subtracted in 200 components = 1.55078e-05 Jy
! Clean residual min=-0.002166 max=0.001859 Jy/beam
! Clean residual mean=-0.000001 rms=0.000536 Jy/beam
! Combined flux in latest and established models = 0.0300244 Jy
! Adding 11 model components to the UV plane model.
! The established model now contains 29 components and 0.0300244 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8779 mas, bmaj=2.354 mas, bpa=-3.192 degrees
! Estimated noise=0.546595 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.53854e-05 Jy
! Component: 100  -  total flux cleaned = -2.68522e-05 Jy
! Component: 150  -  total flux cleaned = -2.00051e-06 Jy
! Component: 200  -  total flux cleaned = 5.71845e-06 Jy
! Total flux subtracted in 200 components = 5.71845e-06 Jy
! Clean residual min=-0.001747 max=0.001717 Jy/beam
! Clean residual mean=-0.000001 rms=0.000402 Jy/beam
! Combined flux in latest and established models = 0.0300302 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 32 components and 0.0300302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045966Jy  sigma=0.664979
! Fit after  self-cal, rms=0.045964Jy  sigma=0.664964
wmodel J1730-2111_X_map.mod
! Writing 32 model components to file: J1730-2111_X_map.mod
wobs   J1730-2111_X_uvs.fits
! Writing UV FITS file: J1730-2111_X_uvs.fits
wwins  J1730-2111_X_map.win
! wwins: Wrote 1 windows to J1730-2111_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000123954 Jy
! Component: 100  -  total flux cleaned = 0.000152622 Jy
! Component: 150  -  total flux cleaned = 0.000231699 Jy
! Component: 200  -  total flux cleaned = 0.000256306 Jy
! Component: 250  -  total flux cleaned = 0.000352152 Jy
! Component: 300  -  total flux cleaned = 0.000466249 Jy
! Component: 350  -  total flux cleaned = 0.000510246 Jy
! Component: 400  -  total flux cleaned = 0.000552691 Jy
! Component: 450  -  total flux cleaned = 0.000675769 Jy
! Component: 500  -  total flux cleaned = 0.000715154 Jy
! Component: 550  -  total flux cleaned = 0.00069538 Jy
! Component: 600  -  total flux cleaned = 0.000733531 Jy
! Component: 650  -  total flux cleaned = 0.000751878 Jy
! Component: 700  -  total flux cleaned = 0.000787757 Jy
! Component: 750  -  total flux cleaned = 0.000857479 Jy
! Component: 800  -  total flux cleaned = 0.000891599 Jy
! Component: 850  -  total flux cleaned = 0.000958548 Jy
! Component: 900  -  total flux cleaned = 0.00100754 Jy
! Component: 950  -  total flux cleaned = 0.00107192 Jy
! Component: 1000  -  total flux cleaned = 0.0011195 Jy
! Component: 1050  -  total flux cleaned = 0.00116607 Jy
! Component: 1100  -  total flux cleaned = 0.00118109 Jy
! Component: 1150  -  total flux cleaned = 0.00119553 Jy
! Component: 1200  -  total flux cleaned = 0.0011807 Jy
! Component: 1250  -  total flux cleaned = 0.0011806 Jy
! Component: 1300  -  total flux cleaned = 0.00113792 Jy
! Component: 1350  -  total flux cleaned = 0.00110986 Jy
! Component: 1400  -  total flux cleaned = 0.00111004 Jy
! Component: 1450  -  total flux cleaned = 0.00113719 Jy
! Component: 1500  -  total flux cleaned = 0.00112377 Jy
! Component: 1550  -  total flux cleaned = 0.00113674 Jy
! Component: 1600  -  total flux cleaned = 0.00113667 Jy
! Component: 1650  -  total flux cleaned = 0.001149 Jy
! Component: 1700  -  total flux cleaned = 0.00109901 Jy
! Component: 1750  -  total flux cleaned = 0.00114811 Jy
! Component: 1800  -  total flux cleaned = 0.00112383 Jy
! Component: 1850  -  total flux cleaned = 0.00115951 Jy
! Component: 1900  -  total flux cleaned = 0.00114778 Jy
! Component: 1950  -  total flux cleaned = 0.00118252 Jy
! Component: 2000  -  total flux cleaned = 0.00112543 Jy
! Component: 2050  -  total flux cleaned = 0.00108058 Jy
! Component: 2100  -  total flux cleaned = 0.00108055 Jy
! Component: 2150  -  total flux cleaned = 0.00105834 Jy
! Component: 2200  -  total flux cleaned = 0.0010801 Jy
! Component: 2250  -  total flux cleaned = 0.00108002 Jy
! Component: 2300  -  total flux cleaned = 0.00106944 Jy
! Component: 2350  -  total flux cleaned = 0.00103792 Jy
! Component: 2400  -  total flux cleaned = 0.00107944 Jy
! Component: 2450  -  total flux cleaned = 0.00106939 Jy
! Component: 2500  -  total flux cleaned = 0.00108963 Jy
! Component: 2550  -  total flux cleaned = 0.0010896 Jy
! Component: 2600  -  total flux cleaned = 0.00107987 Jy
! Component: 2650  -  total flux cleaned = 0.00109966 Jy
! Component: 2700  -  total flux cleaned = 0.00112876 Jy
! Component: 2750  -  total flux cleaned = 0.00113832 Jy
! Component: 2800  -  total flux cleaned = 0.00114782 Jy
! Component: 2850  -  total flux cleaned = 0.00114777 Jy
! Component: 2900  -  total flux cleaned = 0.00118519 Jy
! Component: 2950  -  total flux cleaned = 0.00117577 Jy
! Component: 3000  -  total flux cleaned = 0.00120331 Jy
! Component: 3050  -  total flux cleaned = 0.00123059 Jy
! Component: 3100  -  total flux cleaned = 0.0012306 Jy
! Component: 3150  -  total flux cleaned = 0.00125763 Jy
! Component: 3200  -  total flux cleaned = 0.00129324 Jy
! Component: 3250  -  total flux cleaned = 0.00128455 Jy
! Component: 3300  -  total flux cleaned = 0.0013283 Jy
! Component: 3350  -  total flux cleaned = 0.00134568 Jy
! Component: 3400  -  total flux cleaned = 0.00134568 Jy
! Component: 3450  -  total flux cleaned = 0.00136278 Jy
! Component: 3500  -  total flux cleaned = 0.00136274 Jy
! Component: 3550  -  total flux cleaned = 0.00137108 Jy
! Component: 3600  -  total flux cleaned = 0.00137941 Jy
! Component: 3650  -  total flux cleaned = 0.00135442 Jy
! Component: 3700  -  total flux cleaned = 0.00137918 Jy
! Component: 3750  -  total flux cleaned = 0.00137095 Jy
! Component: 3800  -  total flux cleaned = 0.00134643 Jy
! Component: 3850  -  total flux cleaned = 0.00137091 Jy
! Component: 3900  -  total flux cleaned = 0.00138707 Jy
! Component: 3950  -  total flux cleaned = 0.00137896 Jy
! Component: 4000  -  total flux cleaned = 0.0013709 Jy
! Component: 4050  -  total flux cleaned = 0.00137886 Jy
! Total flux subtracted in 4096 components = 0.00135502 Jy
! Clean residual min=-0.000453 max=0.000452 Jy/beam
! Clean residual mean=-0.000000 rms=0.000131 Jy/beam
! Combined flux in latest and established models = 0.0313852 Jy
keep
! Adding 252 model components to the UV plane model.
! The established model now contains 284 components and 0.0313852 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   .//J1730-2111_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8779 x 2.354 at -3.192 degrees (North through East)
! Clean map  min=-0.0014868  max=0.025547 Jy/beam
! Writing clean map to FITS file: .//J1730-2111_X_map.fits
wmodel .//J1730-2111_X_map.mod
! Writing 284 model components to file: .//J1730-2111_X_map.mod
wobs   .//J1730-2111_X_uvs.fits
! Writing UV FITS file: .//J1730-2111_X_uvs.fits
wwins  .//J1730-2111_X_map.win
! wwins: Wrote 2 windows to .//J1730-2111_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0255471 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000130956 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.53781 1.53781 3.07563 6.15126 12.3025 24.605 49.2101 98.4202
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.025 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  195.081 
quit
! Quitting program
! Log file .//J1730-2111_X_dfm.log closed on Mon Jan 20 18:38:00 2020