! Started logfile: .//J1624-3619_C_dfm.log on Mon Jan 20 18:26:19 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     .//J1624-3619_C_uva.fits
! Reading UV FITS file: .//J1624-3619_C_uva.fits
! AN table 1: 17 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.933333 visibilities/baseline/integration-bin.
! Found source: J1624-3619
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 1904 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J1624-3619_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008699Jy  sigma=11.711596
! Fit after  self-cal, rms=0.952294Jy  sigma=11.024538
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.711 mas, bmaj=7.954 mas, bpa=-3.693 degrees
! Estimated noise=2.08507 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0362916 Jy
! Component: 100  -  total flux cleaned = 0.0456251 Jy
! Total flux subtracted in 100 components = 0.0456251 Jy
! Clean residual min=-0.007020 max=0.006457 Jy/beam
! Clean residual mean=-0.000013 rms=0.001890 Jy/beam
! Combined flux in latest and established models = 0.0456251 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0456251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.074799Jy  sigma=0.689302
! Fit after  self-cal, rms=0.073689Jy  sigma=0.676141
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.945 mas, bmaj=8.548 mas, bpa=-4.2 degrees
! Estimated noise=1.49177 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.011138 Jy
! Component: 100  -  total flux cleaned = 0.0176629 Jy
! Component: 150  -  total flux cleaned = 0.0219496 Jy
! Component: 200  -  total flux cleaned = 0.0249174 Jy
! Total flux subtracted in 200 components = 0.0249174 Jy
! Clean residual min=-0.004221 max=0.004148 Jy/beam
! Clean residual mean=-0.000006 rms=0.001201 Jy/beam
! Combined flux in latest and established models = 0.0705424 Jy
! Performing phase self-cal
! Adding 69 model components to the UV plane model.
! The established model now contains 73 components and 0.0705425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.072110Jy  sigma=0.648275
! Fit after  self-cal, rms=0.071724Jy  sigma=0.646132
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.945 x 8.548 at -4.2 degrees (North through East)
! Clean map  min=-0.0042393  max=0.054247 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.77     KP        0.97     LA        0.97     NL        1.15     
!   PT        0.97     SC        0.94     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.80     KP        1.11     LA        0.89     NL        1.11     
!   PT        0.98     SC        1.06     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.89     KP        0.98     LA        0.82     NL        1.24     
!   PT        1.11     SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.86     KP        1.10     LA        0.84     NL        0.94     
!   PT        0.88     SC        1.02     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.17     KP        0.99     LA        0.87     NL        1.07     
!   PT        0.85     SC        1.22     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.90     KP        0.98     LA        0.97     NL        1.25     
!   PT        0.90     SC        1.06     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.97     KP        0.97     LA        0.94     NL        0.92     
!   PT        1.10     SC        0.97     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.01     KP        1.19     LA        0.93     NL        1.13     
!   PT        0.81     SC        1.11     
! 
! 
! Fit before self-cal, rms=0.071724Jy  sigma=0.646132
! Fit after  self-cal, rms=0.070906Jy  sigma=0.640867
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.951 mas, bmaj=8.588 mas, bpa=-4.581 degrees
! Estimated noise=1.45264 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00169265 Jy
! Component: 100  -  total flux cleaned = 0.00198841 Jy
! Component: 150  -  total flux cleaned = 0.00203333 Jy
! Component: 200  -  total flux cleaned = 0.00196487 Jy
! Total flux subtracted in 200 components = 0.00196487 Jy
! Clean residual min=-0.003173 max=0.002931 Jy/beam
! Clean residual mean=0.000002 rms=0.000792 Jy/beam
! Combined flux in latest and established models = 0.0725073 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 87 components and 0.0725073 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.070806Jy  sigma=0.639704
! Fit after  self-cal, rms=0.071000Jy  sigma=0.638581
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.071000Jy  sigma=0.638581
! Fit after  self-cal, rms=0.070744Jy  sigma=0.638299
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.952 mas, bmaj=8.533 mas, bpa=-4.77 degrees
! Estimated noise=1.45412 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135124 Jy
! Component: 100  -  total flux cleaned = 0.00136163 Jy
! Component: 150  -  total flux cleaned = 0.0012953 Jy
! Component: 200  -  total flux cleaned = 0.00123684 Jy
! Total flux subtracted in 200 components = 0.00123684 Jy
! Clean residual min=-0.003270 max=0.002855 Jy/beam
! Clean residual mean=0.000002 rms=0.000792 Jy/beam
! Combined flux in latest and established models = 0.0737442 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 92 components and 0.0737442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.070694Jy  sigma=0.637794
! Fit after  self-cal, rms=0.070681Jy  sigma=0.637564
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000330862 Jy
! Component: 100  -  total flux cleaned = 0.000231017 Jy
! Component: 150  -  total flux cleaned = 0.000143217 Jy
! Component: 200  -  total flux cleaned = 6.5558e-05 Jy
! Total flux subtracted in 200 components = 6.5558e-05 Jy
! Clean residual min=-0.003250 max=0.002860 Jy/beam
! Clean residual mean=0.000001 rms=0.000806 Jy/beam
! Combined flux in latest and established models = 0.0738097 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 93 components and 0.0738097 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.070649Jy  sigma=0.637227
! Fit after  self-cal, rms=0.070623Jy  sigma=0.637173
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.070623Jy  sigma=0.637173
! Fit after  self-cal, rms=0.069670Jy  sigma=0.636986
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.953 mas, bmaj=8.466 mas, bpa=-4.926 degrees
! Estimated noise=1.45026 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000960918 Jy
! Component: 100  -  total flux cleaned = 0.001027 Jy
! Component: 150  -  total flux cleaned = 0.00100491 Jy
! Component: 200  -  total flux cleaned = 0.000962458 Jy
! Total flux subtracted in 200 components = 0.000962458 Jy
! Clean residual min=-0.003302 max=0.002865 Jy/beam
! Clean residual mean=0.000001 rms=0.000790 Jy/beam
! Combined flux in latest and established models = 0.0747722 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 93 components and 0.0747722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.069643Jy  sigma=0.636718
! Fit after  self-cal, rms=0.069578Jy  sigma=0.636652
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00017597 Jy
! Component: 100  -  total flux cleaned = 0.000107927 Jy
! Component: 150  -  total flux cleaned = 4.83424e-05 Jy
! Component: 200  -  total flux cleaned = -4.57408e-06 Jy
! Total flux subtracted in 200 components = -4.57408e-06 Jy
! Clean residual min=-0.003285 max=0.002807 Jy/beam
! Clean residual mean=0.000001 rms=0.000791 Jy/beam
! Combined flux in latest and established models = 0.0747676 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 93 components and 0.0747676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.069564Jy  sigma=0.636506
! Fit after  self-cal, rms=0.069550Jy  sigma=0.636485
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.069550Jy  sigma=0.636485
! Fit after  self-cal, rms=0.068736Jy  sigma=0.636388
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.259 mas, bmaj=9.035 mas, bpa=-8.388 degrees
! Estimated noise=1.75549 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.95613e-05 Jy
! Component: 100  -  total flux cleaned = -7.36115e-05 Jy
! Component: 150  -  total flux cleaned = -7.35027e-05 Jy
! Component: 200  -  total flux cleaned = -9.18251e-05 Jy
! Total flux subtracted in 200 components = -9.18251e-05 Jy
! Clean residual min=-0.002214 max=0.002149 Jy/beam
! Clean residual mean=0.000001 rms=0.000606 Jy/beam
! Combined flux in latest and established models = 0.0746758 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 97 components and 0.0746758 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.068728Jy  sigma=0.636331
! Fit after  self-cal, rms=0.068676Jy  sigma=0.636288
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.41391e-05 Jy
! Component: 100  -  total flux cleaned = -8.91771e-05 Jy
! Component: 150  -  total flux cleaned = -0.000122355 Jy
! Component: 200  -  total flux cleaned = -0.000153712 Jy
! Total flux subtracted in 200 components = -0.000153712 Jy
! Clean residual min=-0.002184 max=0.002111 Jy/beam
! Clean residual mean=0.000001 rms=0.000605 Jy/beam
! Combined flux in latest and established models = 0.0745221 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 100 components and 0.0745221 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.068670Jy  sigma=0.636288
! Fit after  self-cal, rms=0.068662Jy  sigma=0.636268
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.954 mas, bmaj=8.416 mas, bpa=-5.058 degrees
! Estimated noise=1.44622 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.954 x 8.416 at -5.058 degrees (North through East)
! Clean map  min=-0.0031554  max=0.051799 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.723 mas, bmaj=7.888 mas, bpa=-4.633 degrees
! Estimated noise=2.02594 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.035331 Jy
! Component: 100  -  total flux cleaned = 0.047532 Jy
! Component: 150  -  total flux cleaned = 0.0560107 Jy
! Component: 200  -  total flux cleaned = 0.062064 Jy
! Total flux subtracted in 200 components = 0.062064 Jy
! Clean residual min=-0.006057 max=0.005527 Jy/beam
! Clean residual mean=-0.000006 rms=0.001557 Jy/beam
! Combined flux in latest and established models = 0.062064 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.062064 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.954 mas, bmaj=8.416 mas, bpa=-5.058 degrees
! Estimated noise=1.44622 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0060409 Jy
! Component: 100  -  total flux cleaned = 0.00961534 Jy
! Component: 150  -  total flux cleaned = 0.011556 Jy
! Component: 200  -  total flux cleaned = 0.012062 Jy
! Total flux subtracted in 200 components = 0.012062 Jy
! Clean residual min=-0.003920 max=0.002890 Jy/beam
! Clean residual mean=-0.000001 rms=0.000884 Jy/beam
! Combined flux in latest and established models = 0.0741259 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 46 components and 0.0741259 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.259 mas, bmaj=9.035 mas, bpa=-8.388 degrees
! Estimated noise=1.75549 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000546324 Jy
! Component: 100  -  total flux cleaned = 0.000365339 Jy
! Component: 150  -  total flux cleaned = 0.000228384 Jy
! Component: 200  -  total flux cleaned = 0.000156721 Jy
! Total flux subtracted in 200 components = 0.000156721 Jy
! Clean residual min=-0.002454 max=0.002303 Jy/beam
! Clean residual mean=0.000000 rms=0.000670 Jy/beam
! Combined flux in latest and established models = 0.0742827 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.29798e-07 Jy
! Component: 100  -  total flux cleaned = -2.65271e-05 Jy
! Component: 150  -  total flux cleaned = -5.03323e-05 Jy
! Component: 200  -  total flux cleaned = -4.99548e-05 Jy
! Total flux subtracted in 200 components = -4.99548e-05 Jy
! Clean residual min=-0.002349 max=0.002218 Jy/beam
! Clean residual mean=0.000000 rms=0.000646 Jy/beam
! Combined flux in latest and established models = 0.0742327 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 57 components and 0.0742327 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.954 mas, bmaj=8.416 mas, bpa=-5.058 degrees
! Estimated noise=1.44622 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00063685 Jy
! Component: 100  -  total flux cleaned = 0.0006366 Jy
! Component: 150  -  total flux cleaned = 0.000656395 Jy
! Component: 200  -  total flux cleaned = 0.000637758 Jy
! Total flux subtracted in 200 components = 0.000637758 Jy
! Clean residual min=-0.003511 max=0.002990 Jy/beam
! Clean residual mean=0.000001 rms=0.000810 Jy/beam
! Combined flux in latest and established models = 0.0748705 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 70 components and 0.0748705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.068695Jy  sigma=0.636532
! Fit after  self-cal, rms=0.068635Jy  sigma=0.636456
wmodel J1624-3619_C_map.mod
! Writing 70 model components to file: J1624-3619_C_map.mod
wobs   J1624-3619_C_uvs.fits
! Writing UV FITS file: J1624-3619_C_uvs.fits
wwins  J1624-3619_C_map.win
! wwins: Wrote 1 windows to J1624-3619_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000255298 Jy
! Component: 100  -  total flux cleaned = 0.000183177 Jy
! Component: 150  -  total flux cleaned = 0.000364897 Jy
! Component: 200  -  total flux cleaned = 0.000324199 Jy
! Component: 250  -  total flux cleaned = 0.000323523 Jy
! Component: 300  -  total flux cleaned = 0.000284918 Jy
! Component: 350  -  total flux cleaned = 0.000174804 Jy
! Component: 400  -  total flux cleaned = 0.000104293 Jy
! Component: 450  -  total flux cleaned = -2.97078e-05 Jy
! Component: 500  -  total flux cleaned = -2.99772e-05 Jy
! Component: 550  -  total flux cleaned = -9.28051e-05 Jy
! Component: 600  -  total flux cleaned = -0.00015189 Jy
! Component: 650  -  total flux cleaned = -0.000266985 Jy
! Component: 700  -  total flux cleaned = -0.000294472 Jy
! Component: 750  -  total flux cleaned = -0.000454549 Jy
! Component: 800  -  total flux cleaned = -0.000531702 Jy
! Component: 850  -  total flux cleaned = -0.000557472 Jy
! Component: 900  -  total flux cleaned = -0.000656408 Jy
! Component: 950  -  total flux cleaned = -0.000704696 Jy
! Component: 1000  -  total flux cleaned = -0.000775163 Jy
! Component: 1050  -  total flux cleaned = -0.000821253 Jy
! Component: 1100  -  total flux cleaned = -0.000910501 Jy
! Component: 1150  -  total flux cleaned = -0.000910526 Jy
! Component: 1200  -  total flux cleaned = -0.000932114 Jy
! Component: 1250  -  total flux cleaned = -0.000973926 Jy
! Component: 1300  -  total flux cleaned = -0.000994625 Jy
! Component: 1350  -  total flux cleaned = -0.00105489 Jy
! Component: 1400  -  total flux cleaned = -0.00107433 Jy
! Component: 1450  -  total flux cleaned = -0.00099702 Jy
! Component: 1500  -  total flux cleaned = -0.00101608 Jy
! Component: 1550  -  total flux cleaned = -0.000997399 Jy
! Component: 1600  -  total flux cleaned = -0.000923212 Jy
! Component: 1650  -  total flux cleaned = -0.000849885 Jy
! Component: 1700  -  total flux cleaned = -0.000759275 Jy
! Component: 1750  -  total flux cleaned = -0.00066956 Jy
! Component: 1800  -  total flux cleaned = -0.000563123 Jy
! Component: 1850  -  total flux cleaned = -0.000510199 Jy
! Component: 1900  -  total flux cleaned = -0.000423022 Jy
! Component: 1950  -  total flux cleaned = -0.000336727 Jy
! Component: 2000  -  total flux cleaned = -0.00025129 Jy
! Component: 2050  -  total flux cleaned = -0.000149353 Jy
! Component: 2100  -  total flux cleaned = -3.11501e-05 Jy
! Component: 2150  -  total flux cleaned = 3.61174e-05 Jy
! Component: 2200  -  total flux cleaned = 0.000136409 Jy
! Component: 2250  -  total flux cleaned = 0.000219591 Jy
! Component: 2300  -  total flux cleaned = 0.000302388 Jy
! Component: 2350  -  total flux cleaned = 0.000417725 Jy
! Component: 2400  -  total flux cleaned = 0.000483332 Jy
! Component: 2450  -  total flux cleaned = 0.00054876 Jy
! Component: 2500  -  total flux cleaned = 0.000662944 Jy
! Component: 2550  -  total flux cleaned = 0.000711692 Jy
! Component: 2600  -  total flux cleaned = 0.000760299 Jy
! Component: 2650  -  total flux cleaned = 0.000808842 Jy
! Component: 2700  -  total flux cleaned = 0.000857351 Jy
! Component: 2750  -  total flux cleaned = 0.000873495 Jy
! Component: 2800  -  total flux cleaned = 0.000921969 Jy
! Component: 2850  -  total flux cleaned = 0.000954245 Jy
! Component: 2900  -  total flux cleaned = 0.000986602 Jy
! Component: 2950  -  total flux cleaned = 0.00105135 Jy
! Component: 3000  -  total flux cleaned = 0.0010999 Jy
! Component: 3050  -  total flux cleaned = 0.0011648 Jy
! Component: 3100  -  total flux cleaned = 0.0012135 Jy
! Component: 3150  -  total flux cleaned = 0.00126217 Jy
! Component: 3200  -  total flux cleaned = 0.00131094 Jy
! Component: 3250  -  total flux cleaned = 0.00137634 Jy
! Component: 3300  -  total flux cleaned = 0.00142549 Jy
! Component: 3350  -  total flux cleaned = 0.00145843 Jy
! Component: 3400  -  total flux cleaned = 0.00149151 Jy
! Component: 3450  -  total flux cleaned = 0.00149146 Jy
! Component: 3500  -  total flux cleaned = 0.00152513 Jy
! Component: 3550  -  total flux cleaned = 0.00152513 Jy
! Component: 3600  -  total flux cleaned = 0.00154235 Jy
! Component: 3650  -  total flux cleaned = 0.00154231 Jy
! Component: 3700  -  total flux cleaned = 0.00155938 Jy
! Component: 3750  -  total flux cleaned = 0.00155912 Jy
! Component: 3800  -  total flux cleaned = 0.00161195 Jy
! Component: 3850  -  total flux cleaned = 0.00161229 Jy
! Component: 3900  -  total flux cleaned = 0.00163017 Jy
! Component: 3950  -  total flux cleaned = 0.00164801 Jy
! Component: 4000  -  total flux cleaned = 0.00164816 Jy
! Component: 4050  -  total flux cleaned = 0.00168475 Jy
! Total flux subtracted in 4096 components = 0.00168484 Jy
! Clean residual min=-0.000966 max=0.001107 Jy/beam
! Clean residual mean=0.000002 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.0765553 Jy
keep
! Adding 237 model components to the UV plane model.
! The established model now contains 307 components and 0.0765553 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   .//J1624-3619_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.954 x 8.416 at -5.058 degrees (North through East)
! Clean map  min=-0.0021776  max=0.051252 Jy/beam
! Writing clean map to FITS file: .//J1624-3619_C_map.fits
wmodel .//J1624-3619_C_map.mod
! Writing 307 model components to file: .//J1624-3619_C_map.mod
wobs   .//J1624-3619_C_uvs.fits
! Writing UV FITS file: .//J1624-3619_C_uvs.fits
wwins  .//J1624-3619_C_map.win
! wwins: Wrote 2 windows to .//J1624-3619_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0512517 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000333273 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.9508 1.9508 3.9016 7.8032 15.6064 31.2128 62.4256
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.051 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  153.783 
quit
! Quitting program
! Log file .//J1624-3619_C_dfm.log closed on Mon Jan 20 18:26:22 2020