! Started logfile: .//J1032+2756_C_dfm.log on Mon Jan 20 17:53:00 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     .//J1032+2756_C_uva.fits
! Reading UV FITS file: .//J1032+2756_C_uva.fits
! AN table 1: 92 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.991787 visibilities/baseline/integration-bin.
! Found source: J1032+2756
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 32848 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J1032+2756_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001773Jy  sigma=23.681411
! Fit after  self-cal, rms=0.977744Jy  sigma=23.100239
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.181 mas, bmaj=3.802 mas, bpa=-7.251 degrees
! Estimated noise=0.43775 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0176718 Jy
! Component: 100  -  total flux cleaned = 0.0218207 Jy
! Total flux subtracted in 100 components = 0.0218207 Jy
! Clean residual min=-0.001574 max=0.001835 Jy/beam
! Clean residual mean=-0.000000 rms=0.000402 Jy/beam
! Combined flux in latest and established models = 0.0218207 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0218207 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032907Jy  sigma=0.762859
! Fit after  self-cal, rms=0.030407Jy  sigma=0.699866
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00477806 Jy
! Component: 100  -  total flux cleaned = 0.00701029 Jy
! Total flux subtracted in 100 components = 0.00701029 Jy
! Clean residual min=-0.001335 max=0.001396 Jy/beam
! Clean residual mean=-0.000000 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.028831 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 15 components and 0.028831 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029804Jy  sigma=0.684399
! Fit after  self-cal, rms=0.029797Jy  sigma=0.684105
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.566 mas, bmaj=4.224 mas, bpa=-6.875 degrees
! Estimated noise=0.167091 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.3, 3.9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000794196 Jy
! Component: 100  -  total flux cleaned = 0.000935691 Jy
! Component: 150  -  total flux cleaned = 0.00102043 Jy
! Component: 200  -  total flux cleaned = 0.00108517 Jy
! Total flux subtracted in 200 components = 0.00108517 Jy
! Clean residual min=-0.000617 max=0.000772 Jy/beam
! Clean residual mean=-0.000000 rms=0.000150 Jy/beam
! Combined flux in latest and established models = 0.0299162 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 34 components and 0.0299162 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029751Jy  sigma=0.682951
! Fit after  self-cal, rms=0.029746Jy  sigma=0.682844
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.566 x 4.224 at -6.875 degrees (North through East)
! Clean map  min=-0.00057038  max=0.026642 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.95     HN        0.93     KP        1.03     
!   LA        0.99     MK        0.96     NL        1.00     OV        1.02     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.91     HN        0.99     KP        0.95     
!   LA        1.00     MK        1.06     NL        0.98     OV        1.10     
!   PT        0.96     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.98     KP        0.98     
!   LA        0.98     MK        0.89     NL        0.98     OV        1.15     
!   PT        1.00     SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.05     HN        1.02     KP        0.99     
!   LA        1.03     MK        1.00     NL        1.00     OV        1.03     
!   PT        0.95     SC        0.97     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.03     HN        0.99     KP        1.00     
!   LA        0.93     MK        0.97     NL        0.97     OV        1.13     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.96     HN        0.96     KP        1.08     
!   LA        1.00     MK        1.02     NL        0.99     OV        1.07     
!   PT        0.97     SC        0.94     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.91     KP        0.96     
!   LA        1.02     MK        0.96     NL        1.02     OV        1.04     
!   PT        1.00     SC        0.94     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.03     HN        1.06     KP        0.98     
!   LA        1.04     MK        0.92     NL        1.01     OV        1.01     
!   PT        0.95     SC        0.92     
! 
! 
! Fit before self-cal, rms=0.029746Jy  sigma=0.682844
! Fit after  self-cal, rms=0.029608Jy  sigma=0.681479
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.546 mas, bmaj=4.22 mas, bpa=-6.92 degrees
! Estimated noise=0.165612 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000325092 Jy
! Component: 100  -  total flux cleaned = 0.000377338 Jy
! Component: 150  -  total flux cleaned = 0.000411508 Jy
! Component: 200  -  total flux cleaned = 0.000419146 Jy
! Total flux subtracted in 200 components = 0.000419146 Jy
! Clean residual min=-0.000511 max=0.000506 Jy/beam
! Clean residual mean=-0.000000 rms=0.000121 Jy/beam
! Combined flux in latest and established models = 0.0303353 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 41 components and 0.0303353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029602Jy  sigma=0.681328
! Fit after  self-cal, rms=0.029621Jy  sigma=0.681218
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029621Jy  sigma=0.681218
! Fit after  self-cal, rms=0.029661Jy  sigma=0.681204
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.543 mas, bmaj=4.213 mas, bpa=-6.905 degrees
! Estimated noise=0.16569 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000162244 Jy
! Component: 100  -  total flux cleaned = 0.000180611 Jy
! Component: 150  -  total flux cleaned = 0.000196176 Jy
! Component: 200  -  total flux cleaned = 0.000196105 Jy
! Total flux subtracted in 200 components = 0.000196105 Jy
! Clean residual min=-0.000504 max=0.000504 Jy/beam
! Clean residual mean=-0.000000 rms=0.000119 Jy/beam
! Combined flux in latest and established models = 0.0305314 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 48 components and 0.0305314 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029659Jy  sigma=0.681152
! Fit after  self-cal, rms=0.029660Jy  sigma=0.681147
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.06194e-05 Jy
! Component: 100  -  total flux cleaned = 1.26622e-05 Jy
! Component: 150  -  total flux cleaned = 5.43784e-06 Jy
! Component: 200  -  total flux cleaned = -1.22901e-06 Jy
! Total flux subtracted in 200 components = -1.22901e-06 Jy
! Clean residual min=-0.000497 max=0.000499 Jy/beam
! Clean residual mean=-0.000000 rms=0.000118 Jy/beam
! Combined flux in latest and established models = 0.0305302 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 54 components and 0.0305302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029660Jy  sigma=0.681123
! Fit after  self-cal, rms=0.029659Jy  sigma=0.681124
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029659Jy  sigma=0.681124
! Fit after  self-cal, rms=0.029687Jy  sigma=0.681121
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.543 mas, bmaj=4.21 mas, bpa=-6.871 degrees
! Estimated noise=0.165796 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.53235e-05 Jy
! Component: 100  -  total flux cleaned = 8.17591e-05 Jy
! Component: 150  -  total flux cleaned = 8.16676e-05 Jy
! Component: 200  -  total flux cleaned = 8.15606e-05 Jy
! Total flux subtracted in 200 components = 8.15606e-05 Jy
! Clean residual min=-0.000498 max=0.000498 Jy/beam
! Clean residual mean=-0.000000 rms=0.000118 Jy/beam
! Combined flux in latest and established models = 0.0306118 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 61 components and 0.0306118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029686Jy  sigma=0.681106
! Fit after  self-cal, rms=0.029686Jy  sigma=0.681102
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.28673e-07 Jy
! Component: 100  -  total flux cleaned = -2.11963e-06 Jy
! Component: 150  -  total flux cleaned = -2.16961e-06 Jy
! Component: 200  -  total flux cleaned = -6.63268e-06 Jy
! Total flux subtracted in 200 components = -6.63268e-06 Jy
! Clean residual min=-0.000496 max=0.000495 Jy/beam
! Clean residual mean=-0.000000 rms=0.000117 Jy/beam
! Combined flux in latest and established models = 0.0306051 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 68 components and 0.0306051 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029686Jy  sigma=0.681093
! Fit after  self-cal, rms=0.029686Jy  sigma=0.681094
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029686Jy  sigma=0.681094
! Fit after  self-cal, rms=0.029703Jy  sigma=0.681093
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.562 mas, bmaj=5.253 mas, bpa=-7.489 degrees
! Estimated noise=0.212921 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.10224e-05 Jy
! Component: 100  -  total flux cleaned = 4.98015e-05 Jy
! Component: 150  -  total flux cleaned = 6.32166e-05 Jy
! Component: 200  -  total flux cleaned = 7.15529e-05 Jy
! Total flux subtracted in 200 components = 7.15529e-05 Jy
! Clean residual min=-0.000549 max=0.000611 Jy/beam
! Clean residual mean=-0.000001 rms=0.000149 Jy/beam
! Combined flux in latest and established models = 0.0306767 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 78 components and 0.0306767 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029703Jy  sigma=0.681093
! Fit after  self-cal, rms=0.029703Jy  sigma=0.681090
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.3479e-05 Jy
! Component: 100  -  total flux cleaned = 2.87519e-05 Jy
! Component: 150  -  total flux cleaned = 3.58243e-05 Jy
! Component: 200  -  total flux cleaned = 3.96742e-05 Jy
! Total flux subtracted in 200 components = 3.96742e-05 Jy
! Clean residual min=-0.000545 max=0.000610 Jy/beam
! Clean residual mean=-0.000001 rms=0.000149 Jy/beam
! Combined flux in latest and established models = 0.0307164 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 83 components and 0.0307164 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029703Jy  sigma=0.681093
! Fit after  self-cal, rms=0.029703Jy  sigma=0.681092
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.543 mas, bmaj=4.208 mas, bpa=-6.836 degrees
! Estimated noise=0.165861 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.543 x 4.208 at -6.836 degrees (North through East)
! Clean map  min=-0.00054775  max=0.02658 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.166 mas, bmaj=3.801 mas, bpa=-7.207 degrees
! Estimated noise=0.431393 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0204135 Jy
! Component: 100  -  total flux cleaned = 0.0257286 Jy
! Component: 150  -  total flux cleaned = 0.0283672 Jy
! Component: 200  -  total flux cleaned = 0.0294684 Jy
! Total flux subtracted in 200 components = 0.0294684 Jy
! Clean residual min=-0.001205 max=0.001273 Jy/beam
! Clean residual mean=-0.000000 rms=0.000331 Jy/beam
! Combined flux in latest and established models = 0.0294684 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0294684 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.543 mas, bmaj=4.208 mas, bpa=-6.836 degrees
! Estimated noise=0.165861 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000542091 Jy
! Component: 100  -  total flux cleaned = 0.000778097 Jy
! Component: 150  -  total flux cleaned = 0.000931693 Jy
! Component: 200  -  total flux cleaned = 0.00095484 Jy
! Total flux subtracted in 200 components = 0.00095484 Jy
! Clean residual min=-0.000509 max=0.000534 Jy/beam
! Clean residual mean=-0.000000 rms=0.000123 Jy/beam
! Combined flux in latest and established models = 0.0304233 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 40 components and 0.0304233 Jy
! Inverting map 
! Added new window around map position (6.3, 65.1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000451149 Jy
! Component: 100  -  total flux cleaned = 0.00053762 Jy
! Component: 150  -  total flux cleaned = 0.000556916 Jy
! Component: 200  -  total flux cleaned = 0.000565159 Jy
! Total flux subtracted in 200 components = 0.000565159 Jy
! Clean residual min=-0.000483 max=0.000474 Jy/beam
! Clean residual mean=-0.000000 rms=0.000113 Jy/beam
! Combined flux in latest and established models = 0.0309884 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 63 components and 0.0309884 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.562 mas, bmaj=5.253 mas, bpa=-7.489 degrees
! Estimated noise=0.212921 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000140893 Jy
! Component: 100  -  total flux cleaned = 0.000181836 Jy
! Component: 150  -  total flux cleaned = 0.000210413 Jy
! Component: 200  -  total flux cleaned = 0.000230562 Jy
! Total flux subtracted in 200 components = 0.000230562 Jy
! Clean residual min=-0.000506 max=0.000514 Jy/beam
! Clean residual mean=-0.000001 rms=0.000128 Jy/beam
! Combined flux in latest and established models = 0.031219 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.43638e-06 Jy
! Component: 100  -  total flux cleaned = 6.61358e-06 Jy
! Component: 150  -  total flux cleaned = 6.52429e-06 Jy
! Component: 200  -  total flux cleaned = 9.06362e-06 Jy
! Total flux subtracted in 200 components = 9.06362e-06 Jy
! Clean residual min=-0.000505 max=0.000508 Jy/beam
! Clean residual mean=-0.000001 rms=0.000126 Jy/beam
! Combined flux in latest and established models = 0.031228 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 92 components and 0.031228 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.543 mas, bmaj=4.208 mas, bpa=-6.836 degrees
! Estimated noise=0.165861 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000114736 Jy
! Component: 100  -  total flux cleaned = -0.000137167 Jy
! Component: 150  -  total flux cleaned = -0.00013231 Jy
! Component: 200  -  total flux cleaned = -0.000119391 Jy
! Total flux subtracted in 200 components = -0.000119391 Jy
! Clean residual min=-0.000485 max=0.000474 Jy/beam
! Clean residual mean=-0.000000 rms=0.000109 Jy/beam
! Combined flux in latest and established models = 0.0311087 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 111 components and 0.0311087 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029697Jy  sigma=0.680929
! Fit after  self-cal, rms=0.029697Jy  sigma=0.680890
wmodel J1032+2756_C_map.mod
! Writing 111 model components to file: J1032+2756_C_map.mod
wobs   J1032+2756_C_uvs.fits
! Writing UV FITS file: J1032+2756_C_uvs.fits
wwins  J1032+2756_C_map.win
! wwins: Wrote 3 windows to J1032+2756_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -4.44679e-05 Jy
! Component: 100  -  total flux cleaned = -6.82621e-05 Jy
! Component: 150  -  total flux cleaned = -0.000120494 Jy
! Component: 200  -  total flux cleaned = -0.000134924 Jy
! Component: 250  -  total flux cleaned = -0.000162478 Jy
! Component: 300  -  total flux cleaned = -0.00014902 Jy
! Component: 350  -  total flux cleaned = -0.000142527 Jy
! Component: 400  -  total flux cleaned = -0.000142519 Jy
! Component: 450  -  total flux cleaned = -0.000148736 Jy
! Component: 500  -  total flux cleaned = -0.000142639 Jy
! Component: 550  -  total flux cleaned = -0.000142725 Jy
! Component: 600  -  total flux cleaned = -0.000136871 Jy
! Component: 650  -  total flux cleaned = -0.000142585 Jy
! Component: 700  -  total flux cleaned = -0.000142548 Jy
! Component: 750  -  total flux cleaned = -0.000137073 Jy
! Component: 800  -  total flux cleaned = -0.000153626 Jy
! Component: 850  -  total flux cleaned = -0.000153637 Jy
! Component: 900  -  total flux cleaned = -0.000159 Jy
! Component: 950  -  total flux cleaned = -0.000153708 Jy
! Component: 1000  -  total flux cleaned = -0.000148626 Jy
! Component: 1050  -  total flux cleaned = -0.000148619 Jy
! Component: 1100  -  total flux cleaned = -0.000138533 Jy
! Component: 1150  -  total flux cleaned = -0.000123586 Jy
! Component: 1200  -  total flux cleaned = -0.00010883 Jy
! Component: 1250  -  total flux cleaned = -9.91323e-05 Jy
! Component: 1300  -  total flux cleaned = -0.000103965 Jy
! Component: 1350  -  total flux cleaned = -0.000104004 Jy
! Component: 1400  -  total flux cleaned = -0.000113368 Jy
! Component: 1450  -  total flux cleaned = -0.000103966 Jy
! Component: 1500  -  total flux cleaned = -9.48415e-05 Jy
! Component: 1550  -  total flux cleaned = -9.49098e-05 Jy
! Component: 1600  -  total flux cleaned = -9.94491e-05 Jy
! Component: 1650  -  total flux cleaned = -9.94706e-05 Jy
! Component: 1700  -  total flux cleaned = -7.73381e-05 Jy
! Component: 1750  -  total flux cleaned = -8.1722e-05 Jy
! Component: 1800  -  total flux cleaned = -8.17176e-05 Jy
! Component: 1850  -  total flux cleaned = -8.59848e-05 Jy
! Component: 1900  -  total flux cleaned = -9.02633e-05 Jy
! Component: 1950  -  total flux cleaned = -7.75558e-05 Jy
! Component: 2000  -  total flux cleaned = -8.16985e-05 Jy
! Component: 2050  -  total flux cleaned = -8.58574e-05 Jy
! Component: 2100  -  total flux cleaned = -6.94011e-05 Jy
! Component: 2150  -  total flux cleaned = -8.15851e-05 Jy
! Component: 2200  -  total flux cleaned = -7.34795e-05 Jy
! Component: 2250  -  total flux cleaned = -5.74657e-05 Jy
! Component: 2300  -  total flux cleaned = -4.94773e-05 Jy
! Component: 2350  -  total flux cleaned = -5.73303e-05 Jy
! Component: 2400  -  total flux cleaned = -4.56116e-05 Jy
! Component: 2450  -  total flux cleaned = -2.62725e-05 Jy
! Component: 2500  -  total flux cleaned = -1.85997e-05 Jy
! Component: 2550  -  total flux cleaned = -1.85574e-05 Jy
! Component: 2600  -  total flux cleaned = -2.24158e-05 Jy
! Component: 2650  -  total flux cleaned = -1.86688e-05 Jy
! Component: 2700  -  total flux cleaned = -1.49402e-05 Jy
! Component: 2750  -  total flux cleaned = 3.55932e-06 Jy
! Component: 2800  -  total flux cleaned = 3.47936e-06 Jy
! Component: 2850  -  total flux cleaned = -3.83032e-06 Jy
! Component: 2900  -  total flux cleaned = 7.04075e-06 Jy
! Component: 2950  -  total flux cleaned = 7.04112e-06 Jy
! Component: 3000  -  total flux cleaned = 1.0592e-05 Jy
! Component: 3050  -  total flux cleaned = 7.06961e-06 Jy
! Component: 3100  -  total flux cleaned = 3.56883e-06 Jy
! Component: 3150  -  total flux cleaned = 7.09198e-06 Jy
! Component: 3200  -  total flux cleaned = 7.05555e-06 Jy
! Component: 3250  -  total flux cleaned = 3.59649e-06 Jy
! Component: 3300  -  total flux cleaned = 1.43577e-07 Jy
! Component: 3350  -  total flux cleaned = -1.34581e-05 Jy
! Component: 3400  -  total flux cleaned = -1.00482e-05 Jy
! Component: 3450  -  total flux cleaned = -3.33122e-06 Jy
! Component: 3500  -  total flux cleaned = -1.67282e-05 Jy
! Component: 3550  -  total flux cleaned = -2.00698e-05 Jy
! Component: 3600  -  total flux cleaned = -2.00522e-05 Jy
! Component: 3650  -  total flux cleaned = -2.00343e-05 Jy
! Component: 3700  -  total flux cleaned = -1.35089e-05 Jy
! Component: 3750  -  total flux cleaned = -3.30163e-05 Jy
! Component: 3800  -  total flux cleaned = -1.68881e-05 Jy
! Component: 3850  -  total flux cleaned = -2.32959e-05 Jy
! Component: 3900  -  total flux cleaned = -1.05275e-05 Jy
! Component: 3950  -  total flux cleaned = -2.96009e-05 Jy
! Component: 4000  -  total flux cleaned = -3.27773e-05 Jy
! Component: 4050  -  total flux cleaned = -3.58889e-05 Jy
! Total flux subtracted in 4096 components = -3.90129e-05 Jy
! Clean residual min=-0.000189 max=0.000190 Jy/beam
! Clean residual mean=-0.000000 rms=0.000055 Jy/beam
! Combined flux in latest and established models = 0.0310696 Jy
keep
! Adding 298 model components to the UV plane model.
! The established model now contains 409 components and 0.0310696 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   .//J1032+2756_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.543 x 4.208 at -6.836 degrees (North through East)
! Clean map  min=-0.00040894  max=0.026351 Jy/beam
! Writing clean map to FITS file: .//J1032+2756_C_map.fits
wmodel .//J1032+2756_C_map.mod
! Writing 409 model components to file: .//J1032+2756_C_map.mod
wobs   .//J1032+2756_C_uvs.fits
! Writing UV FITS file: .//J1032+2756_C_uvs.fits
wwins  .//J1032+2756_C_map.win
! wwins: Wrote 4 windows to .//J1032+2756_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.026351 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 5.44502e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.619902 0.619902 1.2398 2.47961 4.95922 9.91843 19.8369 39.6737 79.3475
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.026 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  483.947 
quit
! Quitting program
! Log file .//J1032+2756_C_dfm.log closed on Mon Jan 20 17:53:04 2020