! Started logfile: .//J0836-3430_X_dfm.log on Mon Jan 20 17:46:06 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J0836-3430_X_uva.fits
! Reading UV FITS file: .//J0836-3430_X_uva.fits
! AN table 1: 15 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0836-3430
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 76 lines of history.
! 
! Reading 1800 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0836-3430_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=1.003619Jy  sigma=10.964787
! Fit after  self-cal, rms=0.938853Jy  sigma=10.204067
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.32 mas, bmaj=18.03 mas, bpa=-13.72 degrees
! Estimated noise=2.74641 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.050448 Jy
! Component: 100  -  total flux cleaned = 0.0620584 Jy
! Total flux subtracted in 100 components = 0.0620584 Jy
! Clean residual min=-0.006461 max=0.006433 Jy/beam
! Clean residual mean=0.000013 rms=0.002350 Jy/beam
! Combined flux in latest and established models = 0.0620584 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0620584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.077428Jy  sigma=0.682688
! Fit after  self-cal, rms=0.076759Jy  sigma=0.675040
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.528 mas, bmaj=18.41 mas, bpa=-14 degrees
! Estimated noise=1.60255 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00739793 Jy
! Component: 100  -  total flux cleaned = 0.0105937 Jy
! Component: 150  -  total flux cleaned = 0.0117589 Jy
! Component: 200  -  total flux cleaned = 0.0117756 Jy
! Total flux subtracted in 200 components = 0.0117756 Jy
! Clean residual min=-0.002235 max=0.002248 Jy/beam
! Clean residual mean=0.000012 rms=0.000954 Jy/beam
! Combined flux in latest and established models = 0.073834 Jy
! Performing phase self-cal
! Adding 73 model components to the UV plane model.
! The established model now contains 93 components and 0.073834 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.075326Jy  sigma=0.651946
! Fit after  self-cal, rms=0.075089Jy  sigma=0.650895
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.528 x 18.41 at -14 degrees (North through East)
! Clean map  min=-0.0055134  max=0.063148 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.79     HN        1.19     KP        1.16     NL        1.07     
!   OV        1.06     PT        0.83     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.13     HN        1.08     KP        0.94     NL        0.95     
!   OV        1.13     PT        0.86     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.85     HN        0.79     KP        1.05     NL        1.01     
!   OV        1.18     PT        1.14     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     HN        1.11     KP        1.03     NL        0.97     
!   OV        0.98     PT        0.86     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.87     HN        1.00     KP        1.23     NL        1.11     
!   OV        1.08     PT        1.04     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     HN        0.97     KP        0.85     NL        1.04     
!   OV        1.00     PT        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.90     HN        0.98     KP        0.94     NL        0.82     
!   OV        0.97     PT        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        0.90     KP        1.01     NL        1.09     
!   OV        1.08     PT        0.89     
! 
! 
! Fit before self-cal, rms=0.075089Jy  sigma=0.650895
! Fit after  self-cal, rms=0.074124Jy  sigma=0.640497
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.538 mas, bmaj=18.45 mas, bpa=-14 degrees
! Estimated noise=1.55656 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00292099 Jy
! Component: 100  -  total flux cleaned = 0.00428074 Jy
! Component: 150  -  total flux cleaned = 0.00482607 Jy
! Component: 200  -  total flux cleaned = 0.0048304 Jy
! Total flux subtracted in 200 components = 0.0048304 Jy
! Clean residual min=-0.001286 max=0.001292 Jy/beam
! Clean residual mean=-0.000006 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.0786644 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 137 components and 0.0786644 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.073821Jy  sigma=0.638005
! Fit after  self-cal, rms=0.073963Jy  sigma=0.636785
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.073963Jy  sigma=0.636785
! Fit after  self-cal, rms=0.072625Jy  sigma=0.636455
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.529 mas, bmaj=18.39 mas, bpa=-13.97 degrees
! Estimated noise=1.54017 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00212518 Jy
! Component: 100  -  total flux cleaned = 0.00310494 Jy
! Component: 150  -  total flux cleaned = 0.00332231 Jy
! Component: 200  -  total flux cleaned = 0.00338436 Jy
! Total flux subtracted in 200 components = 0.00338436 Jy
! Clean residual min=-0.001031 max=0.001028 Jy/beam
! Clean residual mean=-0.000005 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.0820487 Jy
selfcal
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 175 components and 0.0820488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.072442Jy  sigma=0.634911
! Fit after  self-cal, rms=0.072311Jy  sigma=0.634705
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00114433 Jy
! Component: 100  -  total flux cleaned = 0.00205903 Jy
! Component: 150  -  total flux cleaned = 0.00277311 Jy
! Component: 200  -  total flux cleaned = 0.0031612 Jy
! Total flux subtracted in 200 components = 0.0031612 Jy
! Clean residual min=-0.000895 max=0.000894 Jy/beam
! Clean residual mean=-0.000003 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.08521 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 194 components and 0.0852099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.072190Jy  sigma=0.633736
! Fit after  self-cal, rms=0.072038Jy  sigma=0.633628
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.072038Jy  sigma=0.633628
! Fit after  self-cal, rms=0.070526Jy  sigma=0.633460
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.518 mas, bmaj=18.33 mas, bpa=-13.95 degrees
! Estimated noise=1.52253 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000831357 Jy
! Component: 100  -  total flux cleaned = 0.000944653 Jy
! Component: 150  -  total flux cleaned = 0.000993288 Jy
! Component: 200  -  total flux cleaned = 0.00118203 Jy
! Total flux subtracted in 200 components = 0.00118203 Jy
! Clean residual min=-0.000749 max=0.000746 Jy/beam
! Clean residual mean=-0.000003 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.086392 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 224 components and 0.086392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.070437Jy  sigma=0.632677
! Fit after  self-cal, rms=0.070282Jy  sigma=0.632580
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000750416 Jy
! Component: 100  -  total flux cleaned = 0.00128828 Jy
! Component: 150  -  total flux cleaned = 0.00164928 Jy
! Component: 200  -  total flux cleaned = 0.00181985 Jy
! Total flux subtracted in 200 components = 0.00181985 Jy
! Clean residual min=-0.000688 max=0.000685 Jy/beam
! Clean residual mean=-0.000003 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.0882118 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 253 components and 0.0882118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.070213Jy  sigma=0.632006
! Fit after  self-cal, rms=0.070150Jy  sigma=0.631867
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.070150Jy  sigma=0.631867
! Fit after  self-cal, rms=0.069093Jy  sigma=0.631734
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.337 mas, bmaj=19.04 mas, bpa=-15.16 degrees
! Estimated noise=1.53815 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000240761 Jy
! Component: 100  -  total flux cleaned = -0.000239741 Jy
! Component: 150  -  total flux cleaned = -0.000339704 Jy
! Component: 200  -  total flux cleaned = -0.000339708 Jy
! Total flux subtracted in 200 components = -0.000339708 Jy
! Clean residual min=-0.000488 max=0.000488 Jy/beam
! Clean residual mean=-0.000003 rms=0.000170 Jy/beam
! Combined flux in latest and established models = 0.0878721 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 290 components and 0.0878721 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.069051Jy  sigma=0.631429
! Fit after  self-cal, rms=0.068975Jy  sigma=0.631384
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000291609 Jy
! Component: 100  -  total flux cleaned = 0.000354832 Jy
! Component: 150  -  total flux cleaned = 0.000210023 Jy
! Component: 200  -  total flux cleaned = 0.000209341 Jy
! Total flux subtracted in 200 components = 0.000209341 Jy
! Clean residual min=-0.000450 max=0.000450 Jy/beam
! Clean residual mean=-0.000000 rms=0.000157 Jy/beam
! Combined flux in latest and established models = 0.0880814 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 317 components and 0.0880814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.068943Jy  sigma=0.631091
! Fit after  self-cal, rms=0.068914Jy  sigma=0.631065
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.51 mas, bmaj=18.24 mas, bpa=-13.94 degrees
! Estimated noise=1.51189 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.51 x 18.24 at -13.94 degrees (North through East)
! Clean map  min=-0.0035825  max=0.060439 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.313 mas, bmaj=17.87 mas, bpa=-13.7 degrees
! Estimated noise=2.62723 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.047861 Jy
! Component: 100  -  total flux cleaned = 0.0592696 Jy
! Component: 150  -  total flux cleaned = 0.0612567 Jy
! Component: 200  -  total flux cleaned = 0.0634676 Jy
! Total flux subtracted in 200 components = 0.0634676 Jy
! Clean residual min=-0.004234 max=0.004223 Jy/beam
! Clean residual mean=-0.000015 rms=0.001637 Jy/beam
! Combined flux in latest and established models = 0.0634676 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 60 model components to the UV plane model.
! The established model now contains 60 components and 0.0634676 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.51 mas, bmaj=18.24 mas, bpa=-13.94 degrees
! Estimated noise=1.51189 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00257931 Jy
! Component: 100  -  total flux cleaned = 0.00352075 Jy
! Component: 150  -  total flux cleaned = 0.00487854 Jy
! Component: 200  -  total flux cleaned = 0.00618105 Jy
! Total flux subtracted in 200 components = 0.00618105 Jy
! Clean residual min=-0.002042 max=0.002047 Jy/beam
! Clean residual mean=0.000001 rms=0.000825 Jy/beam
! Combined flux in latest and established models = 0.0696486 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 120 components and 0.0696486 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.337 mas, bmaj=19.04 mas, bpa=-15.16 degrees
! Estimated noise=1.53815 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000412598 Jy
! Component: 100  -  total flux cleaned = 0.00080501 Jy
! Component: 150  -  total flux cleaned = 0.00184727 Jy
! Component: 200  -  total flux cleaned = 0.00248147 Jy
! Total flux subtracted in 200 components = 0.00248147 Jy
! Clean residual min=-0.001026 max=0.001029 Jy/beam
! Clean residual mean=0.000001 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.0721301 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107984 Jy
! Component: 100  -  total flux cleaned = 0.00235106 Jy
! Component: 150  -  total flux cleaned = 0.00348367 Jy
! Component: 200  -  total flux cleaned = 0.00449178 Jy
! Total flux subtracted in 200 components = 0.00449178 Jy
! Clean residual min=-0.000921 max=0.000930 Jy/beam
! Clean residual mean=0.000005 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.0766219 Jy
! Adding 82 model components to the UV plane model.
! The established model now contains 200 components and 0.0766219 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.51 mas, bmaj=18.24 mas, bpa=-13.94 degrees
! Estimated noise=1.51189 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000826319 Jy
! Component: 100  -  total flux cleaned = 0.00104852 Jy
! Component: 150  -  total flux cleaned = 0.00131254 Jy
! Component: 200  -  total flux cleaned = 0.00155932 Jy
! Total flux subtracted in 200 components = 0.00155932 Jy
! Clean residual min=-0.000998 max=0.000998 Jy/beam
! Clean residual mean=0.000001 rms=0.000369 Jy/beam
! Combined flux in latest and established models = 0.0781812 Jy
selfcal
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 240 components and 0.0781812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.069066Jy  sigma=0.632633
! Fit after  self-cal, rms=0.069002Jy  sigma=0.632399
wmodel J0836-3430_X_map.mod
! Writing 240 model components to file: J0836-3430_X_map.mod
wobs   J0836-3430_X_uvs.fits
! Writing UV FITS file: J0836-3430_X_uvs.fits
wwins  J0836-3430_X_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J0836-3430_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.51 x 18.24 at -13.94 degrees (North through East)
! Clean map  min=-0.0034029  max=0.054542 Jy/beam
! Writing clean map to FITS file: .//J0836-3430_X_map.fits
wmodel .//J0836-3430_X_map.mod
! Writing 240 model components to file: .//J0836-3430_X_map.mod
wobs   .//J0836-3430_X_uvs.fits
! Writing UV FITS file: .//J0836-3430_X_uvs.fits
wwins  .//J0836-3430_X_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0545423 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000350968 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.93043 1.93043 3.86087 7.72174 15.4435 30.887 61.7739
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.054 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  155.405 
quit
! Quitting program
! Log file .//J0836-3430_X_dfm.log closed on Mon Jan 20 17:46:09 2020