! Started logfile: .//J0749+2313_C_dfm.log on Mon Jan 20 17:42:10 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     .//J0749+2313_C_uva.fits
! Reading UV FITS file: .//J0749+2313_C_uva.fits
! AN table 1: 47 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.990544 visibilities/baseline/integration-bin.
! Found source: J0749+2313
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 85 lines of history.
! 
! Reading 13408 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J0749+2313_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000509Jy  sigma=23.097635
! Fit after  self-cal, rms=0.983816Jy  sigma=22.708607
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.304 mas, bmaj=3.748 mas, bpa=15.84 degrees
! Estimated noise=0.555398 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0127418 Jy
! Component: 100  -  total flux cleaned = 0.0156857 Jy
! Total flux subtracted in 100 components = 0.0156857 Jy
! Clean residual min=-0.001592 max=0.001534 Jy/beam
! Clean residual mean=-0.000001 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.0156857 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0156857 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032713Jy  sigma=0.724780
! Fit after  self-cal, rms=0.030765Jy  sigma=0.677588
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00402989 Jy
! Component: 100  -  total flux cleaned = 0.00512635 Jy
! Total flux subtracted in 100 components = 0.00512635 Jy
! Clean residual min=-0.001515 max=0.001376 Jy/beam
! Clean residual mean=-0.000000 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.020812 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 8 components and 0.020812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030282Jy  sigma=0.665811
! Fit after  self-cal, rms=0.030285Jy  sigma=0.665787
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.679 mas, bmaj=4.082 mas, bpa=13.51 degrees
! Estimated noise=0.269132 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000755162 Jy
! Component: 100  -  total flux cleaned = 0.00110242 Jy
! Component: 150  -  total flux cleaned = 0.00119474 Jy
! Component: 200  -  total flux cleaned = 0.00123262 Jy
! Total flux subtracted in 200 components = 0.00123262 Jy
! Clean residual min=-0.000879 max=0.000966 Jy/beam
! Clean residual mean=0.000001 rms=0.000252 Jy/beam
! Combined flux in latest and established models = 0.0220447 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 16 components and 0.0220447 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030264Jy  sigma=0.665336
! Fit after  self-cal, rms=0.030268Jy  sigma=0.665234
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.679 x 4.082 at 13.51 degrees (North through East)
! Clean map  min=-0.0008093  max=0.020574 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     HN        1.02     KP        1.02     LA        0.99     
!   MK        1.02     NL        0.92     OV        1.04     PT        1.03     
!   SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.86     HN        1.06     KP        1.13     LA        1.00     
!   MK        0.93     NL        0.91     OV        0.90     PT        0.88     
!   SC        1.15     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     HN        1.09     KP        1.04     LA        1.02     
!   MK        0.87     NL        0.93     OV        1.01     PT        1.00     
!   SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     HN        0.78     KP        1.05     LA        0.97     
!   MK        0.98     NL        1.04     OV        0.92     PT        1.01     
!   SC        0.96     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     HN        1.02     KP        1.05     LA        1.05     
!   MK        1.03     NL        1.00     OV        0.91     PT        0.97     
!   SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     HN        1.15     KP        1.03     LA        1.07     
!   MK        0.97     NL        1.02     OV        0.96     PT        1.07     
!   SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     HN        1.15     KP        1.13     LA        1.00     
!   MK        1.00     NL        1.11     OV        1.00     PT        1.03     
!   SC        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     HN        1.02     KP        1.04     LA        1.01     
!   MK        0.92     NL        0.98     OV        0.95     PT        0.97     
!   SC        0.96     
! 
! 
! Fit before self-cal, rms=0.030268Jy  sigma=0.665234
! Fit after  self-cal, rms=0.029983Jy  sigma=0.663515
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.672 mas, bmaj=4.088 mas, bpa=13.55 degrees
! Estimated noise=0.267766 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.5416e-05 Jy
! Component: 100  -  total flux cleaned = 7.60119e-05 Jy
! Component: 150  -  total flux cleaned = 9.24304e-05 Jy
! Component: 200  -  total flux cleaned = 0.000107464 Jy
! Total flux subtracted in 200 components = 0.000107464 Jy
! Clean residual min=-0.000797 max=0.000871 Jy/beam
! Clean residual mean=0.000000 rms=0.000218 Jy/beam
! Combined flux in latest and established models = 0.0221521 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 24 components and 0.0221521 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029977Jy  sigma=0.663404
! Fit after  self-cal, rms=0.029998Jy  sigma=0.663139
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029998Jy  sigma=0.663139
! Fit after  self-cal, rms=0.030106Jy  sigma=0.663091
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.669 mas, bmaj=4.088 mas, bpa=13.43 degrees
! Estimated noise=0.268061 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.64719e-05 Jy
! Component: 100  -  total flux cleaned = 7.94951e-05 Jy
! Component: 150  -  total flux cleaned = 8.68138e-05 Jy
! Component: 200  -  total flux cleaned = 0.000100192 Jy
! Total flux subtracted in 200 components = 0.000100192 Jy
! Clean residual min=-0.000787 max=0.000825 Jy/beam
! Clean residual mean=0.000000 rms=0.000215 Jy/beam
! Combined flux in latest and established models = 0.0222523 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 27 components and 0.0222523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030101Jy  sigma=0.663007
! Fit after  self-cal, rms=0.030110Jy  sigma=0.662962
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.12298e-05 Jy
! Component: 100  -  total flux cleaned = -6.92134e-06 Jy
! Component: 150  -  total flux cleaned = 5.6963e-06 Jy
! Component: 200  -  total flux cleaned = 1.72123e-05 Jy
! Total flux subtracted in 200 components = 1.72123e-05 Jy
! Clean residual min=-0.000791 max=0.000813 Jy/beam
! Clean residual mean=0.000000 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.0222695 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 28 components and 0.0222695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030106Jy  sigma=0.662899
! Fit after  self-cal, rms=0.030107Jy  sigma=0.662881
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030107Jy  sigma=0.662881
! Fit after  self-cal, rms=0.030102Jy  sigma=0.662873
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.668 mas, bmaj=4.087 mas, bpa=13.31 degrees
! Estimated noise=0.268032 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.38464e-05 Jy
! Component: 100  -  total flux cleaned = 9.03226e-05 Jy
! Component: 150  -  total flux cleaned = 9.01268e-05 Jy
! Component: 200  -  total flux cleaned = 8.47326e-05 Jy
! Total flux subtracted in 200 components = 8.47326e-05 Jy
! Clean residual min=-0.000795 max=0.000801 Jy/beam
! Clean residual mean=0.000000 rms=0.000213 Jy/beam
! Combined flux in latest and established models = 0.0223543 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 29 components and 0.0223543 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030099Jy  sigma=0.662819
! Fit after  self-cal, rms=0.030101Jy  sigma=0.662800
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.29506e-06 Jy
! Component: 100  -  total flux cleaned = -9.33664e-06 Jy
! Component: 150  -  total flux cleaned = 6.88966e-07 Jy
! Component: 200  -  total flux cleaned = 5.55296e-06 Jy
! Total flux subtracted in 200 components = 5.55296e-06 Jy
! Clean residual min=-0.000799 max=0.000797 Jy/beam
! Clean residual mean=0.000000 rms=0.000212 Jy/beam
! Combined flux in latest and established models = 0.0223598 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 30 components and 0.0223598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030098Jy  sigma=0.662760
! Fit after  self-cal, rms=0.030099Jy  sigma=0.662747
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030099Jy  sigma=0.662747
! Fit after  self-cal, rms=0.030071Jy  sigma=0.662743
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.317 mas, bmaj=5.537 mas, bpa=0.6413 degrees
! Estimated noise=0.332425 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00029458 Jy
! Component: 100  -  total flux cleaned = 0.000261958 Jy
! Component: 150  -  total flux cleaned = 0.000256389 Jy
! Component: 200  -  total flux cleaned = 0.000256517 Jy
! Total flux subtracted in 200 components = 0.000256517 Jy
! Clean residual min=-0.000896 max=0.001278 Jy/beam
! Clean residual mean=0.000001 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.0226163 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 34 components and 0.0226163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030070Jy  sigma=0.662766
! Fit after  self-cal, rms=0.030068Jy  sigma=0.662703
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.76016e-05 Jy
! Component: 100  -  total flux cleaned = 3.8496e-05 Jy
! Component: 150  -  total flux cleaned = 3.30695e-05 Jy
! Component: 200  -  total flux cleaned = 3.31712e-05 Jy
! Total flux subtracted in 200 components = 3.31712e-05 Jy
! Clean residual min=-0.000902 max=0.001272 Jy/beam
! Clean residual mean=0.000001 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.0226495 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 35 components and 0.0226495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030067Jy  sigma=0.662725
! Fit after  self-cal, rms=0.030067Jy  sigma=0.662687
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.667 mas, bmaj=4.086 mas, bpa=13.19 degrees
! Estimated noise=0.267976 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.667 x 4.086 at 13.19 degrees (North through East)
! Clean map  min=-0.00075231  max=0.02043 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.299 mas, bmaj=3.752 mas, bpa=15.47 degrees
! Estimated noise=0.543511 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0154891 Jy
! Component: 100  -  total flux cleaned = 0.0192659 Jy
! Component: 150  -  total flux cleaned = 0.0206974 Jy
! Component: 200  -  total flux cleaned = 0.0210716 Jy
! Total flux subtracted in 200 components = 0.0210716 Jy
! Clean residual min=-0.001388 max=0.001310 Jy/beam
! Clean residual mean=-0.000000 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.0210716 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0210716 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.667 mas, bmaj=4.086 mas, bpa=13.19 degrees
! Estimated noise=0.267976 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.8, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00114106 Jy
! Component: 100  -  total flux cleaned = 0.00168346 Jy
! Component: 150  -  total flux cleaned = 0.00188225 Jy
! Component: 200  -  total flux cleaned = 0.0019152 Jy
! Total flux subtracted in 200 components = 0.0019152 Jy
! Clean residual min=-0.000872 max=0.000776 Jy/beam
! Clean residual mean=0.000001 rms=0.000206 Jy/beam
! Combined flux in latest and established models = 0.0229868 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 30 components and 0.0229868 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.317 mas, bmaj=5.537 mas, bpa=0.6413 degrees
! Estimated noise=0.332425 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.08294e-05 Jy
! Component: 100  -  total flux cleaned = 7.60151e-06 Jy
! Component: 150  -  total flux cleaned = 3.49585e-05 Jy
! Component: 200  -  total flux cleaned = 5.81213e-05 Jy
! Total flux subtracted in 200 components = 5.81213e-05 Jy
! Clean residual min=-0.000899 max=0.001034 Jy/beam
! Clean residual mean=0.000002 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.0230449 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.92948e-05 Jy
! Component: 100  -  total flux cleaned = 2.48949e-05 Jy
! Component: 150  -  total flux cleaned = 3.52868e-05 Jy
! Component: 200  -  total flux cleaned = 3.54997e-05 Jy
! Total flux subtracted in 200 components = 3.54997e-05 Jy
! Clean residual min=-0.000892 max=0.001018 Jy/beam
! Clean residual mean=0.000002 rms=0.000293 Jy/beam
! Combined flux in latest and established models = 0.0230804 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 70 components and 0.0230804 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.667 mas, bmaj=4.086 mas, bpa=13.19 degrees
! Estimated noise=0.267976 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.14606e-05 Jy
! Component: 100  -  total flux cleaned = -4.41687e-05 Jy
! Component: 150  -  total flux cleaned = -2.56292e-05 Jy
! Component: 200  -  total flux cleaned = -9.23887e-06 Jy
! Total flux subtracted in 200 components = -9.23887e-06 Jy
! Clean residual min=-0.000864 max=0.000725 Jy/beam
! Clean residual mean=0.000001 rms=0.000196 Jy/beam
! Combined flux in latest and established models = 0.0230712 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 85 components and 0.0230712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030054Jy  sigma=0.662346
! Fit after  self-cal, rms=0.030039Jy  sigma=0.662139
wmodel J0749+2313_C_map.mod
! Writing 85 model components to file: J0749+2313_C_map.mod
wobs   J0749+2313_C_uvs.fits
! Writing UV FITS file: J0749+2313_C_uvs.fits
wwins  J0749+2313_C_map.win
! wwins: Wrote 2 windows to J0749+2313_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000141652 Jy
! Component: 100  -  total flux cleaned = -0.000129588 Jy
! Component: 150  -  total flux cleaned = -0.000117581 Jy
! Component: 200  -  total flux cleaned = -0.000105844 Jy
! Component: 250  -  total flux cleaned = -0.000128323 Jy
! Component: 300  -  total flux cleaned = -0.000160369 Jy
! Component: 350  -  total flux cleaned = -0.000180722 Jy
! Component: 400  -  total flux cleaned = -0.000160819 Jy
! Component: 450  -  total flux cleaned = -0.00015115 Jy
! Component: 500  -  total flux cleaned = -0.000141757 Jy
! Component: 550  -  total flux cleaned = -0.000123578 Jy
! Component: 600  -  total flux cleaned = -0.000123758 Jy
! Component: 650  -  total flux cleaned = -0.000115197 Jy
! Component: 700  -  total flux cleaned = -0.000123651 Jy
! Component: 750  -  total flux cleaned = -9.82718e-05 Jy
! Component: 800  -  total flux cleaned = -6.57409e-05 Jy
! Component: 850  -  total flux cleaned = -3.41624e-05 Jy
! Component: 900  -  total flux cleaned = -1.12172e-05 Jy
! Component: 950  -  total flux cleaned = -1.11406e-05 Jy
! Component: 1000  -  total flux cleaned = -1.11495e-05 Jy
! Component: 1050  -  total flux cleaned = -3.88456e-06 Jy
! Component: 1100  -  total flux cleaned = -1.09792e-05 Jy
! Component: 1150  -  total flux cleaned = -1.80024e-05 Jy
! Component: 1200  -  total flux cleaned = -1.79595e-05 Jy
! Component: 1250  -  total flux cleaned = -1.13e-05 Jy
! Component: 1300  -  total flux cleaned = -2.44343e-05 Jy
! Component: 1350  -  total flux cleaned = -1.78237e-05 Jy
! Component: 1400  -  total flux cleaned = -3.05542e-05 Jy
! Component: 1450  -  total flux cleaned = -3.68598e-05 Jy
! Component: 1500  -  total flux cleaned = -4.94137e-05 Jy
! Component: 1550  -  total flux cleaned = -5.54887e-05 Jy
! Component: 1600  -  total flux cleaned = -6.13964e-05 Jy
! Component: 1650  -  total flux cleaned = -4.9474e-05 Jy
! Component: 1700  -  total flux cleaned = -4.9567e-05 Jy
! Component: 1750  -  total flux cleaned = -3.79689e-05 Jy
! Component: 1800  -  total flux cleaned = -4.37423e-05 Jy
! Component: 1850  -  total flux cleaned = -9.8889e-06 Jy
! Component: 1900  -  total flux cleaned = -1.0005e-05 Jy
! Component: 1950  -  total flux cleaned = -1.54582e-05 Jy
! Component: 2000  -  total flux cleaned = 1.17864e-05 Jy
! Component: 2050  -  total flux cleaned = 6.5283e-06 Jy
! Component: 2100  -  total flux cleaned = 4.9089e-05 Jy
! Component: 2150  -  total flux cleaned = 4.91973e-05 Jy
! Component: 2200  -  total flux cleaned = 6.47714e-05 Jy
! Component: 2250  -  total flux cleaned = 7.50502e-05 Jy
! Component: 2300  -  total flux cleaned = 8.52364e-05 Jy
! Component: 2350  -  total flux cleaned = 0.000105397 Jy
! Component: 2400  -  total flux cleaned = 0.000110359 Jy
! Component: 2450  -  total flux cleaned = 0.000120245 Jy
! Component: 2500  -  total flux cleaned = 0.000144545 Jy
! Component: 2550  -  total flux cleaned = 0.000149401 Jy
! Component: 2600  -  total flux cleaned = 0.000168519 Jy
! Component: 2650  -  total flux cleaned = 0.000187418 Jy
! Component: 2700  -  total flux cleaned = 0.000178141 Jy
! Component: 2750  -  total flux cleaned = 0.000219923 Jy
! Component: 2800  -  total flux cleaned = 0.000229073 Jy
! Component: 2850  -  total flux cleaned = 0.000219991 Jy
! Component: 2900  -  total flux cleaned = 0.000224606 Jy
! Component: 2950  -  total flux cleaned = 0.000233562 Jy
! Component: 3000  -  total flux cleaned = 0.00024689 Jy
! Component: 3050  -  total flux cleaned = 0.000251286 Jy
! Component: 3100  -  total flux cleaned = 0.000286154 Jy
! Component: 3150  -  total flux cleaned = 0.000273166 Jy
! Component: 3200  -  total flux cleaned = 0.000290333 Jy
! Component: 3250  -  total flux cleaned = 0.000294601 Jy
! Component: 3300  -  total flux cleaned = 0.000315747 Jy
! Component: 3350  -  total flux cleaned = 0.000328339 Jy
! Component: 3400  -  total flux cleaned = 0.000353312 Jy
! Component: 3450  -  total flux cleaned = 0.000378049 Jy
! Component: 3500  -  total flux cleaned = 0.000390338 Jy
! Component: 3550  -  total flux cleaned = 0.000418777 Jy
! Component: 3600  -  total flux cleaned = 0.000422825 Jy
! Component: 3650  -  total flux cleaned = 0.000438852 Jy
! Component: 3700  -  total flux cleaned = 0.000454749 Jy
! Component: 3750  -  total flux cleaned = 0.000478512 Jy
! Component: 3800  -  total flux cleaned = 0.000490274 Jy
! Component: 3850  -  total flux cleaned = 0.00049803 Jy
! Component: 3900  -  total flux cleaned = 0.000501892 Jy
! Component: 3950  -  total flux cleaned = 0.000525015 Jy
! Component: 4000  -  total flux cleaned = 0.000532696 Jy
! Component: 4050  -  total flux cleaned = 0.000559338 Jy
! Total flux subtracted in 4096 components = 0.000578259 Jy
! Clean residual min=-0.000214 max=0.000201 Jy/beam
! Clean residual mean=0.000001 rms=0.000067 Jy/beam
! Combined flux in latest and established models = 0.0236494 Jy
keep
! Adding 288 model components to the UV plane model.
! The established model now contains 373 components and 0.0236494 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   .//J0749+2313_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.667 x 4.086 at 13.19 degrees (North through East)
! Clean map  min=-0.00053554  max=0.020422 Jy/beam
! Writing clean map to FITS file: .//J0749+2313_C_map.fits
wmodel .//J0749+2313_C_map.mod
! Writing 373 model components to file: .//J0749+2313_C_map.mod
wobs   .//J0749+2313_C_uvs.fits
! Writing UV FITS file: .//J0749+2313_C_uvs.fits
wwins  .//J0749+2313_C_map.win
! wwins: Wrote 3 windows to .//J0749+2313_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0204217 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 6.57996e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.966614 0.966614 1.93323 3.86646 7.73291 15.4658 30.9317 61.8633
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.02 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  310.361 
quit
! Quitting program
! Log file .//J0749+2313_C_dfm.log closed on Mon Jan 20 17:42:14 2020