! Started logfile: .//J2357-1125_X_dfm.log on Mon Jan 20 00:10:21 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs .//J2357-1125_X_uvm.fits ! Reading UV FITS file: .//J2357-1125_X_uvm.fits ! AN table 1: 22 integrations on 15 of 15 possible baselines. ! AN table 2: 16 integrations on 15 of 15 possible baselines. ! AN table 3: 17 integrations on 15 of 15 possible baselines. ! AN table 4: 30 integrations on 21 of 21 possible baselines. ! AN table 5: 31 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.793201 visibilities/baseline/integration-bin. ! Found source: J2357-1125 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 76 lines of history. ! ! Reading 11200 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2357-1125_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 30 telescope corrections were flagged in sub-array 4. ! A total of 80 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 30 telescope corrections were flagged in sub-array 4. ! A total of 80 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 30 telescope corrections were flagged in sub-array 4. ! A total of 80 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 30 telescope corrections were flagged in sub-array 4. ! A total of 80 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 5. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 30 telescope corrections were flagged in sub-array 4. ! A total of 80 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 6. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 30 telescope corrections were flagged in sub-array 4. ! A total of 80 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 30 telescope corrections were flagged in sub-array 4. ! A total of 80 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 30 telescope corrections were flagged in sub-array 4. ! A total of 80 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=1.469269Jy sigma=27.568732 ! Fit after self-cal, rms=0.334049Jy sigma=6.121356 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.281 mas, bmaj=4.638 mas, bpa=-9.816 degrees ! Estimated noise=0.679562 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.7511 Jy ! Component: 100 - total flux cleaned = 1.00667 Jy ! Total flux subtracted in 100 components = 1.00667 Jy ! Clean residual min=-0.063157 max=0.110450 Jy/beam ! Clean residual mean=-0.000184 rms=0.017164 Jy/beam ! Combined flux in latest and established models = 1.00667 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 1.00667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.278040Jy sigma=5.216255 ! Fit after self-cal, rms=0.277857Jy sigma=5.213690 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129321 Jy ! Component: 100 - total flux cleaned = 0.211575 Jy ! Total flux subtracted in 100 components = 0.211575 Jy ! Clean residual min=-0.046150 max=0.048223 Jy/beam ! Clean residual mean=-0.000097 rms=0.010742 Jy/beam ! Combined flux in latest and established models = 1.21825 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 53 components and 1.21825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.170725Jy sigma=3.137622 ! Fit after self-cal, rms=0.170557Jy sigma=3.135513 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.726 mas, bmaj=4.972 mas, bpa=-6.463 degrees ! Estimated noise=0.36855 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.080288 Jy ! Component: 100 - total flux cleaned = 0.126012 Jy ! Component: 150 - total flux cleaned = 0.155086 Jy ! Component: 200 - total flux cleaned = 0.175069 Jy ! Total flux subtracted in 200 components = 0.175069 Jy ! Clean residual min=-0.036150 max=0.042479 Jy/beam ! Clean residual mean=-0.000009 rms=0.010553 Jy/beam ! Combined flux in latest and established models = 1.39332 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 102 components and 1.39332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.125062Jy sigma=2.318349 ! Fit after self-cal, rms=0.124742Jy sigma=2.314097 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.726 x 4.972 at -6.463 degrees (North through East) ! Clean map min=-0.035244 max=1.0215 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 KP 1.04 LA 1.03 NL 0.96 ! OV 1.12 PT 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.93 HN 0.95 KP 1.03 NL 0.99 ! OV 1.14 PT 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.97 HN 1.07 NL 0.91 ! OV 1.08 PT 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 0.91 HN 1.12 KP 1.01 ! NL 0.93 OV 1.11 PT 0.91 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.92 KP 1.02 MK 1.05 OV 1.08 ! PT 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.97 KP 1.05 LA 1.03 NL 0.96 ! OV 1.11 PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 0.92 KP 1.03 NL 0.98 ! OV 1.13 PT 0.89 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.97 HN 1.07 NL 0.90 ! OV 1.09 PT 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 0.91 HN 1.12 KP 1.01 ! NL 0.92 OV 1.11 PT 0.91 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.94 KP 1.00 MK 0.99 OV 1.07 ! PT 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.97 KP 1.05 LA 1.03 NL 0.96 ! OV 1.11 PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 0.93 KP 1.02 NL 0.99 ! OV 1.13 PT 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.98 HN 1.08 NL 0.92 ! OV 1.06 PT 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 0.92 HN 1.14 KP 1.01 ! NL 0.92 OV 1.10 PT 0.91 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.94 KP 1.00 MK 1.04 OV 1.08 ! PT 0.92 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 0.97 KP 1.05 LA 1.04 NL 0.97 ! OV 1.13 PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 HN 0.94 KP 1.03 NL 0.98 ! OV 1.14 PT 0.89 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.98 HN 1.09 NL 0.92 ! OV 1.08 PT 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 0.92 HN 1.12 KP 1.01 ! NL 0.92 OV 1.11 PT 0.92 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.95 KP 1.01 MK 0.93 OV 1.09 ! PT 0.92 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 KP 1.06 LA 1.04 NL 0.98 ! OV 1.13 PT 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 0.94 KP 1.02 NL 0.99 ! OV 1.13 PT 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.99 HN 1.09 NL 0.91 ! OV 1.07 PT 0.95 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 FD 0.92 HN 1.11 KP 1.02 ! NL 0.93 OV 1.11 PT 0.91 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.94 KP 1.01 MK 0.84 OV 1.11 ! PT 0.94 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 KP 1.07 LA 1.04 NL 0.98 ! OV 1.14 PT 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 HN 0.95 KP 1.04 NL 1.01 ! OV 1.12 PT 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.98 HN 1.09 NL 0.91 ! OV 1.07 PT 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 FD 0.91 HN 1.12 KP 1.02 ! NL 0.93 OV 1.11 PT 0.92 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.97 KP 1.01 MK 0.85 OV 1.11 ! PT 0.92 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 KP 1.08 LA 1.05 NL 0.98 ! OV 1.13 PT 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 0.97 KP 1.04 NL 0.99 ! OV 1.14 PT 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 0.99 HN 1.10 NL 0.93 ! OV 1.08 PT 0.95 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 FD 0.92 HN 1.12 KP 1.02 ! NL 0.92 OV 1.11 PT 0.92 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.96 KP 1.02 MK 0.83 OV 1.09 ! PT 0.94 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 KP 1.07 LA 1.05 NL 0.98 ! OV 1.13 PT 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 HN 0.95 KP 1.03 NL 0.98 ! OV 1.13 PT 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.00 HN 1.08 NL 0.91 ! OV 1.08 PT 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 FD 0.93 HN 1.11 KP 1.02 ! NL 0.92 OV 1.10 PT 0.92 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.96 KP 1.03 MK 0.81 OV 1.08 ! PT 0.95 ! ! ! Fit before self-cal, rms=0.124742Jy sigma=2.314097 ! Fit after self-cal, rms=0.070816Jy sigma=1.281180 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.712 mas, bmaj=4.958 mas, bpa=-7.208 degrees ! Estimated noise=0.365139 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, 7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0238344 Jy ! Component: 100 - total flux cleaned = 0.0341243 Jy ! Component: 150 - total flux cleaned = 0.035605 Jy ! Component: 200 - total flux cleaned = 0.0360394 Jy ! Total flux subtracted in 200 components = 0.0360394 Jy ! Clean residual min=-0.009397 max=0.012572 Jy/beam ! Clean residual mean=-0.000002 rms=0.002610 Jy/beam ! Combined flux in latest and established models = 1.42936 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 116 components and 1.42936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.060155Jy sigma=1.058344 ! Fit after self-cal, rms=0.059826Jy sigma=1.053451 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.059826Jy sigma=1.053451 ! Fit after self-cal, rms=0.058528Jy sigma=1.027905 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.713 mas, bmaj=4.953 mas, bpa=-7.222 degrees ! Estimated noise=0.365376 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00662518 Jy ! Component: 100 - total flux cleaned = 0.00771044 Jy ! Component: 150 - total flux cleaned = 0.0089591 Jy ! Component: 200 - total flux cleaned = 0.0103091 Jy ! Total flux subtracted in 200 components = 0.0103091 Jy ! Clean residual min=-0.008241 max=0.010523 Jy/beam ! Clean residual mean=-0.000002 rms=0.002066 Jy/beam ! Combined flux in latest and established models = 1.43967 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 133 components and 1.43967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.054653Jy sigma=0.951070 ! Fit after self-cal, rms=0.054545Jy sigma=0.949432 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, -7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000154948 Jy ! Component: 100 - total flux cleaned = -0.000523936 Jy ! Component: 150 - total flux cleaned = 5.38962e-05 Jy ! Component: 200 - total flux cleaned = 0.000850061 Jy ! Total flux subtracted in 200 components = 0.000850061 Jy ! Clean residual min=-0.007200 max=0.008280 Jy/beam ! Clean residual mean=-0.000002 rms=0.001781 Jy/beam ! Combined flux in latest and established models = 1.44052 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 154 components and 1.44052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.051086Jy sigma=0.881628 ! Fit after self-cal, rms=0.050962Jy sigma=0.880138 ! Inverting map ! Added new window around map position (10.6, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00513237 Jy ! Component: 100 - total flux cleaned = 0.00716642 Jy ! Component: 150 - total flux cleaned = 0.00878668 Jy ! Component: 200 - total flux cleaned = 0.00987658 Jy ! Total flux subtracted in 200 components = 0.00987658 Jy ! Clean residual min=-0.006262 max=0.006586 Jy/beam ! Clean residual mean=-0.000000 rms=0.001495 Jy/beam ! Combined flux in latest and established models = 1.45039 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 178 components and 1.45039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.048617Jy sigma=0.836793 ! Fit after self-cal, rms=0.048537Jy sigma=0.835735 ! Inverting map ! Added new window around map position (-13.8, -11.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00351305 Jy ! Component: 100 - total flux cleaned = 0.00392353 Jy ! Component: 150 - total flux cleaned = 0.00448284 Jy ! Component: 200 - total flux cleaned = 0.00464599 Jy ! Total flux subtracted in 200 components = 0.00464599 Jy ! Clean residual min=-0.005409 max=0.005483 Jy/beam ! Clean residual mean=-0.000001 rms=0.001264 Jy/beam ! Combined flux in latest and established models = 1.45504 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 197 components and 1.45504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.046957Jy sigma=0.806401 ! Fit after self-cal, rms=0.046893Jy sigma=0.805402 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.046893Jy sigma=0.805402 ! Fit after self-cal, rms=0.045884Jy sigma=0.784833 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.712 mas, bmaj=4.951 mas, bpa=-7.267 degrees ! Estimated noise=0.364921 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000135757 Jy ! Component: 100 - total flux cleaned = 0.000549125 Jy ! Component: 150 - total flux cleaned = 0.00102355 Jy ! Component: 200 - total flux cleaned = 0.00162054 Jy ! Total flux subtracted in 200 components = 0.00162054 Jy ! Clean residual min=-0.004805 max=0.005020 Jy/beam ! Clean residual mean=-0.000001 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 1.45666 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 213 components and 1.45666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.044754Jy sigma=0.764839 ! Fit after self-cal, rms=0.044725Jy sigma=0.764400 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000142577 Jy ! Component: 100 - total flux cleaned = 0.000832087 Jy ! Component: 150 - total flux cleaned = 0.00122886 Jy ! Component: 200 - total flux cleaned = 0.00185702 Jy ! Total flux subtracted in 200 components = 0.00185702 Jy ! Clean residual min=-0.004406 max=0.004518 Jy/beam ! Clean residual mean=-0.000001 rms=0.000951 Jy/beam ! Combined flux in latest and established models = 1.45852 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 226 components and 1.45852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.043970Jy sigma=0.751245 ! Fit after self-cal, rms=0.043949Jy sigma=0.750895 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.043949Jy sigma=0.750895 ! Fit after self-cal, rms=0.043872Jy sigma=0.749882 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.538 mas, bmaj=5.645 mas, bpa=-0.3882 degrees ! Estimated noise=0.379849 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190795 Jy ! Component: 100 - total flux cleaned = 0.00298206 Jy ! Component: 150 - total flux cleaned = 0.00326181 Jy ! Component: 200 - total flux cleaned = 0.00314137 Jy ! Total flux subtracted in 200 components = 0.00314137 Jy ! Clean residual min=-0.003211 max=0.002587 Jy/beam ! Clean residual mean=0.000000 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 1.46166 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 252 components and 1.46166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.043586Jy sigma=0.744489 ! Fit after self-cal, rms=0.043551Jy sigma=0.744120 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000473869 Jy ! Component: 100 - total flux cleaned = 0.00018681 Jy ! Component: 150 - total flux cleaned = 2.6884e-05 Jy ! Component: 200 - total flux cleaned = -0.000168658 Jy ! Total flux subtracted in 200 components = -0.000168658 Jy ! Clean residual min=-0.003121 max=0.002480 Jy/beam ! Clean residual mean=0.000001 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 1.46149 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 268 components and 1.46149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.043401Jy sigma=0.741338 ! Fit after self-cal, rms=0.043381Jy sigma=0.741126 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.711 mas, bmaj=4.951 mas, bpa=-7.292 degrees ! Estimated noise=0.364731 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.711 x 4.951 at -7.292 degrees (North through East) ! Clean map min=-0.0060392 max=1.0146 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.043381Jy sigma=0.741126 ! Fit after self-cal, rms=0.038648Jy sigma=0.640559 ! Inverting map and beam ! Estimated beam: bmin=1.713 mas, bmaj=4.953 mas, bpa=-7.275 degrees ! Estimated noise=0.364783 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000931358 Jy ! Component: 100 - total flux cleaned = -0.000936137 Jy ! Component: 150 - total flux cleaned = -0.000935109 Jy ! Component: 200 - total flux cleaned = -0.000627339 Jy ! Total flux subtracted in 200 components = -0.000627339 Jy ! Clean residual min=-0.004169 max=0.003668 Jy/beam ! Clean residual mean=0.000000 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 1.46086 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 286 components and 1.46086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.038040Jy sigma=0.630313 ! Fit after self-cal, rms=0.038033Jy sigma=0.630201 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.72254e-06 Jy ! Component: 100 - total flux cleaned = 0.000275953 Jy ! Component: 150 - total flux cleaned = 0.000547173 Jy ! Component: 200 - total flux cleaned = 0.000632278 Jy ! Total flux subtracted in 200 components = 0.000632278 Jy ! Clean residual min=-0.003801 max=0.003364 Jy/beam ! Clean residual mean=0.000000 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 1.4615 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 298 components and 1.4615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.037614Jy sigma=0.623104 ! Fit after self-cal, rms=0.037608Jy sigma=0.622977 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.037608Jy sigma=0.622977 ! Fit after self-cal, rms=0.037561Jy sigma=0.622521 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.263 mas, bmaj=4.662 mas, bpa=-10.52 degrees ! Estimated noise=0.671526 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.748249 Jy ! Component: 100 - total flux cleaned = 1.01489 Jy ! Component: 150 - total flux cleaned = 1.15077 Jy ! Component: 200 - total flux cleaned = 1.23486 Jy ! Total flux subtracted in 200 components = 1.23486 Jy ! Clean residual min=-0.031321 max=0.045040 Jy/beam ! Clean residual mean=-0.000087 rms=0.007608 Jy/beam ! Combined flux in latest and established models = 1.23486 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 59 model components to the UV plane model. ! The established model now contains 59 components and 1.23486 Jy ! Inverting map and beam ! Estimated beam: bmin=1.714 mas, bmaj=4.954 mas, bpa=-7.276 degrees ! Estimated noise=0.364696 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0718458 Jy ! Component: 100 - total flux cleaned = 0.111459 Jy ! Component: 150 - total flux cleaned = 0.137561 Jy ! Component: 200 - total flux cleaned = 0.154546 Jy ! Total flux subtracted in 200 components = 0.154546 Jy ! Clean residual min=-0.011316 max=0.012558 Jy/beam ! Clean residual mean=-0.000023 rms=0.002998 Jy/beam ! Combined flux in latest and established models = 1.3894 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 92 components and 1.38941 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.537 mas, bmaj=5.645 mas, bpa=-0.4419 degrees ! Estimated noise=0.379711 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145395 Jy ! Component: 100 - total flux cleaned = 0.0246401 Jy ! Component: 150 - total flux cleaned = 0.0324498 Jy ! Component: 200 - total flux cleaned = 0.0388428 Jy ! Total flux subtracted in 200 components = 0.0388428 Jy ! Clean residual min=-0.005257 max=0.005577 Jy/beam ! Clean residual mean=-0.000015 rms=0.001529 Jy/beam ! Combined flux in latest and established models = 1.42825 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00540611 Jy ! Component: 100 - total flux cleaned = 0.0100195 Jy ! Component: 150 - total flux cleaned = 0.0140397 Jy ! Component: 200 - total flux cleaned = 0.017161 Jy ! Total flux subtracted in 200 components = 0.017161 Jy ! Clean residual min=-0.003810 max=0.003845 Jy/beam ! Clean residual mean=-0.000009 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 1.44541 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 156 components and 1.44541 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.714 mas, bmaj=4.954 mas, bpa=-7.276 degrees ! Estimated noise=0.364696 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00062403 Jy ! Component: 100 - total flux cleaned = 0.000843713 Jy ! Component: 150 - total flux cleaned = 0.00182245 Jy ! Component: 200 - total flux cleaned = 0.00181355 Jy ! Total flux subtracted in 200 components = 0.00181355 Jy ! Clean residual min=-0.006400 max=0.006236 Jy/beam ! Clean residual mean=-0.000006 rms=0.001299 Jy/beam ! Combined flux in latest and established models = 1.44722 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 173 components and 1.44722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.043787Jy sigma=0.730931 ! Fit after self-cal, rms=0.042854Jy sigma=0.713125 wmodel J2357-1125_X_map.mod ! Writing 173 model components to file: J2357-1125_X_map.mod wobs J2357-1125_X_uvs.fits ! Writing UV FITS file: J2357-1125_X_uvs.fits wwins J2357-1125_X_map.win ! wwins: Wrote 5 windows to J2357-1125_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000269523 Jy ! Component: 100 - total flux cleaned = 0.000425933 Jy ! Component: 150 - total flux cleaned = 0.000612656 Jy ! Component: 200 - total flux cleaned = 0.000523358 Jy ! Component: 250 - total flux cleaned = 0.000695908 Jy ! Component: 300 - total flux cleaned = 0.000697163 Jy ! Component: 350 - total flux cleaned = 0.000936518 Jy ! Component: 400 - total flux cleaned = 0.00132244 Jy ! Component: 450 - total flux cleaned = 0.00162138 Jy ! Component: 500 - total flux cleaned = 0.00205719 Jy ! Component: 550 - total flux cleaned = 0.00241093 Jy ! Component: 600 - total flux cleaned = 0.00289331 Jy ! Component: 650 - total flux cleaned = 0.00322892 Jy ! Component: 700 - total flux cleaned = 0.00349278 Jy ! Component: 750 - total flux cleaned = 0.00381448 Jy ! Component: 800 - total flux cleaned = 0.00419124 Jy ! Component: 850 - total flux cleaned = 0.00419006 Jy ! Component: 900 - total flux cleaned = 0.00430999 Jy ! Component: 950 - total flux cleaned = 0.00419154 Jy ! Component: 1000 - total flux cleaned = 0.00413469 Jy ! Component: 1050 - total flux cleaned = 0.00424884 Jy ! Component: 1100 - total flux cleaned = 0.00430419 Jy ! Component: 1150 - total flux cleaned = 0.00414034 Jy ! Component: 1200 - total flux cleaned = 0.00430117 Jy ! Component: 1250 - total flux cleaned = 0.0043007 Jy ! Component: 1300 - total flux cleaned = 0.00445546 Jy ! Component: 1350 - total flux cleaned = 0.00450652 Jy ! Component: 1400 - total flux cleaned = 0.00475583 Jy ! Component: 1450 - total flux cleaned = 0.0047554 Jy ! Component: 1500 - total flux cleaned = 0.00485193 Jy ! Component: 1550 - total flux cleaned = 0.00504197 Jy ! Component: 1600 - total flux cleaned = 0.00513602 Jy ! Component: 1650 - total flux cleaned = 0.00527451 Jy ! Component: 1700 - total flux cleaned = 0.00532045 Jy ! Component: 1750 - total flux cleaned = 0.00545358 Jy ! Component: 1800 - total flux cleaned = 0.00549728 Jy ! Component: 1850 - total flux cleaned = 0.00562574 Jy ! Component: 1900 - total flux cleaned = 0.00566697 Jy ! Component: 1950 - total flux cleaned = 0.00570815 Jy ! Component: 2000 - total flux cleaned = 0.00574937 Jy ! Component: 2050 - total flux cleaned = 0.00583115 Jy ! Component: 2100 - total flux cleaned = 0.00595108 Jy ! Component: 2150 - total flux cleaned = 0.0061083 Jy ! Component: 2200 - total flux cleaned = 0.00614634 Jy ! Component: 2250 - total flux cleaned = 0.00618481 Jy ! Component: 2300 - total flux cleaned = 0.00637215 Jy ! Component: 2350 - total flux cleaned = 0.00633496 Jy ! Component: 2400 - total flux cleaned = 0.00651764 Jy ! Component: 2450 - total flux cleaned = 0.00662539 Jy ! Component: 2500 - total flux cleaned = 0.00669606 Jy ! Component: 2550 - total flux cleaned = 0.00687069 Jy ! Component: 2600 - total flux cleaned = 0.00693961 Jy ! Component: 2650 - total flux cleaned = 0.00710944 Jy ! Component: 2700 - total flux cleaned = 0.00720956 Jy ! Component: 2750 - total flux cleaned = 0.007276 Jy ! Component: 2800 - total flux cleaned = 0.00740617 Jy ! Component: 2850 - total flux cleaned = 0.00750275 Jy ! Component: 2900 - total flux cleaned = 0.00766106 Jy ! Component: 2950 - total flux cleaned = 0.00772329 Jy ! Component: 3000 - total flux cleaned = 0.00778464 Jy ! Component: 3050 - total flux cleaned = 0.00790627 Jy ! Component: 3100 - total flux cleaned = 0.00790568 Jy ! Component: 3150 - total flux cleaned = 0.00793494 Jy ! Component: 3200 - total flux cleaned = 0.00790577 Jy ! Component: 3250 - total flux cleaned = 0.00796349 Jy ! Component: 3300 - total flux cleaned = 0.00790627 Jy ! Component: 3350 - total flux cleaned = 0.00790625 Jy ! Component: 3400 - total flux cleaned = 0.00782297 Jy ! Component: 3450 - total flux cleaned = 0.00785056 Jy ! Component: 3500 - total flux cleaned = 0.0077417 Jy ! Component: 3550 - total flux cleaned = 0.00771451 Jy ! Component: 3600 - total flux cleaned = 0.00755513 Jy ! Component: 3650 - total flux cleaned = 0.00760763 Jy ! Component: 3700 - total flux cleaned = 0.00750355 Jy ! Component: 3750 - total flux cleaned = 0.00747804 Jy ! Component: 3800 - total flux cleaned = 0.00750302 Jy ! Component: 3850 - total flux cleaned = 0.00742738 Jy ! Component: 3900 - total flux cleaned = 0.00735295 Jy ! Component: 3950 - total flux cleaned = 0.00737799 Jy ! Component: 4000 - total flux cleaned = 0.00732958 Jy ! Component: 4050 - total flux cleaned = 0.00735336 Jy ! Total flux subtracted in 4096 components = 0.00725844 Jy ! Clean residual min=-0.001260 max=0.001272 Jy/beam ! Clean residual mean=-0.000000 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 1.45448 Jy keep ! Adding 197 model components to the UV plane model. ! The established model now contains 368 components and 1.45448 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap .//J2357-1125_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.714 x 4.954 at -7.276 degrees (North through East) ! Clean map min=-0.0040703 max=1.015 Jy/beam ! Writing clean map to FITS file: .//J2357-1125_X_map.fits wmodel .//J2357-1125_X_map.mod ! Writing 368 model components to file: .//J2357-1125_X_map.mod wobs .//J2357-1125_X_uvs.fits ! Writing UV FITS file: .//J2357-1125_X_uvs.fits wwins .//J2357-1125_X_map.win ! wwins: Wrote 6 windows to .//J2357-1125_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.01504 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000424741 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.125535 0.125535 0.25107 0.50214 1.00428 2.00856 4.01712 8.03424 16.0685 32.1369 64.2739 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.015 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2389.77 quit ! Quitting program ! Log file .//J2357-1125_X_dfm.log closed on Mon Jan 20 00:10:26 2020