! Started logfile: .//J1517-2422_C_dfm.log on Mon Jan 20 00:06:44 2020 float field_size field_size = 1024 float field_cell field_cell = 0.3000 float taper_size taper_size = 40.0 float freq freq = 4.12800 obs .//J1517-2422_C_uvm.fits ! Reading UV FITS file: .//J1517-2422_C_uvm.fits ! AN table 1: 17 integrations on 36 of 36 possible baselines. ! AN table 2: 17 integrations on 36 of 36 possible baselines. ! AN table 3: 17 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.964806 visibilities/baseline/integration-bin. ! Found source: J1517-2422 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 15352 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/opt64/bin/pima_mupet_01.dfm J1517-2422_C] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.845908Jy sigma=33.730179 ! Fit after self-cal, rms=0.950737Jy sigma=17.715059 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.225 mas, bmaj=3.337 mas, bpa=-3.187 degrees ! Estimated noise=0.547247 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.884875 Jy ! Component: 100 - total flux cleaned = 1.20702 Jy ! Total flux subtracted in 100 components = 1.20702 Jy ! Clean residual min=-0.129140 max=0.519740 Jy/beam ! Clean residual mean=-0.000019 rms=0.032277 Jy/beam ! Combined flux in latest and established models = 1.20702 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.20702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.867866Jy sigma=15.820245 ! Fit after self-cal, rms=0.867973Jy sigma=15.797098 ! Inverting map ! Added new window around map position (2.1, -7.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.427063 Jy ! Component: 100 - total flux cleaned = 0.630967 Jy ! Total flux subtracted in 100 components = 0.630967 Jy ! Clean residual min=-0.084143 max=0.197484 Jy/beam ! Clean residual mean=-0.000033 rms=0.019997 Jy/beam ! Combined flux in latest and established models = 1.83799 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 23 components and 1.83799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.542697Jy sigma=9.797209 ! Fit after self-cal, rms=0.488950Jy sigma=9.180187 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.186137 Jy ! Component: 100 - total flux cleaned = 0.304713 Jy ! Total flux subtracted in 100 components = 0.304713 Jy ! Clean residual min=-0.050074 max=0.138960 Jy/beam ! Clean residual mean=-0.000007 rms=0.012848 Jy/beam ! Combined flux in latest and established models = 2.1427 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 35 components and 2.1427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.362379Jy sigma=6.603746 ! Fit after self-cal, rms=0.350325Jy sigma=6.477757 ! Inverting map ! Added new window around map position (-2.1, 3.9). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.121724 Jy ! Component: 100 - total flux cleaned = 0.200768 Jy ! Total flux subtracted in 100 components = 0.200768 Jy ! Clean residual min=-0.038321 max=0.098828 Jy/beam ! Clean residual mean=-0.000004 rms=0.009367 Jy/beam ! Combined flux in latest and established models = 2.34347 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 48 components and 2.34347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.281156Jy sigma=5.044166 ! Fit after self-cal, rms=0.279844Jy sigma=5.004373 ! Inverting map ! Added new window around map position (4.2, -9.9). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0884093 Jy ! Component: 100 - total flux cleaned = 0.148505 Jy ! Total flux subtracted in 100 components = 0.148505 Jy ! Clean residual min=-0.033171 max=0.051039 Jy/beam ! Clean residual mean=-0.000005 rms=0.007527 Jy/beam ! Combined flux in latest and established models = 2.49197 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 60 components and 2.49197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.228712Jy sigma=4.011041 ! Fit after self-cal, rms=0.225923Jy sigma=3.985335 ! Inverting map ! Added new window around map position (20.1, -34.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0539759 Jy ! Component: 100 - total flux cleaned = 0.0943632 Jy ! Total flux subtracted in 100 components = 0.0943632 Jy ! Clean residual min=-0.031011 max=0.037750 Jy/beam ! Clean residual mean=-0.000002 rms=0.006527 Jy/beam ! Combined flux in latest and established models = 2.58634 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 69 components and 2.58634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.201247Jy sigma=3.470242 ! Fit after self-cal, rms=0.199755Jy sigma=3.457528 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.527 mas, bmaj=4.025 mas, bpa=-2.765 degrees ! Estimated noise=0.3476 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, -13.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0709098 Jy ! Component: 100 - total flux cleaned = 0.117613 Jy ! Component: 150 - total flux cleaned = 0.151904 Jy ! Component: 200 - total flux cleaned = 0.178351 Jy ! Total flux subtracted in 200 components = 0.178351 Jy ! Clean residual min=-0.030530 max=0.038922 Jy/beam ! Clean residual mean=0.000014 rms=0.007676 Jy/beam ! Combined flux in latest and established models = 2.76469 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 99 components and 2.76469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.170139Jy sigma=2.838618 ! Fit after self-cal, rms=0.166509Jy sigma=2.788225 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.527 x 4.025 at -2.765 degrees (North through East) ! Clean map min=-0.027613 max=1.1653 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 HN 1.08 KP 0.96 LA 0.91 ! MK 0.99 NL 0.99 OV 0.99 PT 0.95 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.99 HN 1.06 KP 0.98 ! MK 1.06 NL 1.01 OV 1.00 PT 0.97 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.04 HN 1.19 KP 1.02 ! LA 1.01 MK 1.05 NL 1.06 OV 1.03 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 HN 1.08 KP 0.96 LA 0.91 ! MK 0.99 NL 1.00 OV 0.98 PT 0.95 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.99 HN 1.06 KP 0.98 ! MK 1.06 NL 1.01 OV 1.00 PT 0.96 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.03 HN 1.17 KP 1.03 ! LA 1.02 MK 1.05 NL 1.08 OV 1.04 ! PT 1.03 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 HN 1.09 KP 0.96 LA 0.89 ! MK 0.99 NL 0.99 OV 0.98 PT 0.98 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.98 HN 1.05 KP 0.98 ! MK 1.05 NL 1.01 OV 1.00 PT 0.96 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 FD 1.02 HN 1.16 KP 1.02 ! LA 1.02 MK 1.07 NL 1.06 OV 1.05 ! PT 1.03 SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 HN 1.11 KP 0.95 LA 0.89 ! MK 0.98 NL 1.00 OV 0.95 PT 0.90 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.98 HN 0.91 KP 0.97 ! MK 1.06 NL 0.98 OV 1.06 PT 0.98 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.03 HN 1.16 KP 1.02 ! LA 1.03 MK 1.03 NL 1.07 OV 1.04 ! PT 1.03 SC 0.94 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 HN 1.05 KP 0.97 LA 0.89 ! MK 0.99 NL 1.01 OV 0.98 PT 0.96 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.15 FD 0.98 HN 1.02 KP 0.98 ! MK 1.02 NL 1.01 OV 0.98 PT 0.97 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.03 HN 1.11 KP 1.03 ! LA 1.03 MK 0.99 NL 1.01 OV 1.03 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 HN 1.03 KP 0.97 LA 0.89 ! MK 0.98 NL 1.01 OV 0.98 PT 0.96 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.99 HN 1.03 KP 0.99 ! MK 1.03 NL 1.00 OV 0.97 PT 0.97 ! SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.01 HN 1.14 KP 1.02 ! LA 1.03 MK 0.92 NL 0.99 OV 1.04 ! PT 1.04 SC 1.02 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 HN 1.02 KP 0.98 LA 0.89 ! MK 0.98 NL 1.01 OV 0.98 PT 0.96 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.99 HN 1.03 KP 0.98 ! MK 1.03 NL 1.00 OV 0.98 PT 0.96 ! SC 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.02 HN 1.14 KP 1.01 ! LA 1.03 MK 0.91 NL 0.99 OV 1.03 ! PT 1.04 SC 1.04 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 HN 1.03 KP 0.97 LA 0.89 ! MK 0.98 NL 1.01 OV 0.98 PT 0.97 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.99 HN 1.05 KP 0.98 ! MK 1.02 NL 1.01 OV 0.98 PT 0.96 ! SC 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.01 HN 1.15 KP 1.01 ! LA 1.03 MK 0.87 NL 0.97 OV 1.03 ! PT 1.05 SC 1.06 ! ! ! Fit before self-cal, rms=0.166509Jy sigma=2.788225 ! Fit after self-cal, rms=0.118532Jy sigma=1.744997 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.526 mas, bmaj=4.013 mas, bpa=-2.578 degrees ! Estimated noise=0.347448 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0119026 Jy ! Component: 100 - total flux cleaned = -0.0094064 Jy ! Component: 150 - total flux cleaned = -0.00846427 Jy ! Component: 200 - total flux cleaned = -0.00720081 Jy ! Total flux subtracted in 200 components = -0.00720081 Jy ! Clean residual min=-0.015771 max=0.025910 Jy/beam ! Clean residual mean=0.000008 rms=0.004191 Jy/beam ! Combined flux in latest and established models = 2.75749 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 120 components and 2.75749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.111009Jy sigma=1.629739 ! Fit after self-cal, rms=0.109015Jy sigma=1.607193 ! Inverting map ! Added new window around map position (9.3, -19.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187973 Jy ! Component: 100 - total flux cleaned = 0.0253411 Jy ! Component: 150 - total flux cleaned = 0.03069 Jy ! Component: 200 - total flux cleaned = 0.0356428 Jy ! Total flux subtracted in 200 components = 0.0356428 Jy ! Clean residual min=-0.013740 max=0.015059 Jy/beam ! Clean residual mean=0.000002 rms=0.003395 Jy/beam ! Combined flux in latest and established models = 2.79313 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 139 components and 2.79313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.101689Jy sigma=1.476626 ! Fit after self-cal, rms=0.100645Jy sigma=1.464842 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.100645Jy sigma=1.464842 ! Fit after self-cal, rms=0.099720Jy sigma=1.446369 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.526 mas, bmaj=4.011 mas, bpa=-2.659 degrees ! Estimated noise=0.347456 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00260663 Jy ! Component: 100 - total flux cleaned = 0.00240556 Jy ! Component: 150 - total flux cleaned = 0.00490351 Jy ! Component: 200 - total flux cleaned = 0.00551797 Jy ! Total flux subtracted in 200 components = 0.00551797 Jy ! Clean residual min=-0.012168 max=0.013757 Jy/beam ! Clean residual mean=0.000000 rms=0.003152 Jy/beam ! Combined flux in latest and established models = 2.79865 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 152 components and 2.79865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.096195Jy sigma=1.389646 ! Fit after self-cal, rms=0.095389Jy sigma=1.381518 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14.4, -0.9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00826455 Jy ! Component: 100 - total flux cleaned = 0.013733 Jy ! Component: 150 - total flux cleaned = 0.0183422 Jy ! Component: 200 - total flux cleaned = 0.0213422 Jy ! Total flux subtracted in 200 components = 0.0213422 Jy ! Clean residual min=-0.012331 max=0.013072 Jy/beam ! Clean residual mean=0.000001 rms=0.002829 Jy/beam ! Combined flux in latest and established models = 2.81999 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 168 components and 2.81999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.092666Jy sigma=1.330953 ! Fit after self-cal, rms=0.092199Jy sigma=1.325478 ! Inverting map ! Added new window around map position (23.1, 21.3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00255643 Jy ! Component: 100 - total flux cleaned = 0.00152138 Jy ! Component: 150 - total flux cleaned = 0.00182009 Jy ! Component: 200 - total flux cleaned = 0.00262692 Jy ! Total flux subtracted in 200 components = 0.00262692 Jy ! Clean residual min=-0.011780 max=0.012319 Jy/beam ! Clean residual mean=0.000003 rms=0.002648 Jy/beam ! Combined flux in latest and established models = 2.82262 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 181 components and 2.82262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.089685Jy sigma=1.279478 ! Fit after self-cal, rms=0.089413Jy sigma=1.277136 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.089413Jy sigma=1.277136 ! Fit after self-cal, rms=0.089059Jy sigma=1.268353 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.524 mas, bmaj=4.007 mas, bpa=-2.658 degrees ! Estimated noise=0.347095 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00292391 Jy ! Component: 100 - total flux cleaned = -0.00185439 Jy ! Component: 150 - total flux cleaned = -0.000865122 Jy ! Component: 200 - total flux cleaned = 0.00075501 Jy ! Total flux subtracted in 200 components = 0.00075501 Jy ! Clean residual min=-0.010986 max=0.011615 Jy/beam ! Clean residual mean=0.000000 rms=0.002496 Jy/beam ! Combined flux in latest and established models = 2.82337 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 196 components and 2.82337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.087453Jy sigma=1.238877 ! Fit after self-cal, rms=0.087126Jy sigma=1.236180 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.1, 15.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00786907 Jy ! Component: 100 - total flux cleaned = 0.00860632 Jy ! Component: 150 - total flux cleaned = 0.00904096 Jy ! Component: 200 - total flux cleaned = 0.00904204 Jy ! Total flux subtracted in 200 components = 0.00904204 Jy ! Clean residual min=-0.010291 max=0.011632 Jy/beam ! Clean residual mean=-0.000001 rms=0.002358 Jy/beam ! Combined flux in latest and established models = 2.83241 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 218 components and 2.83241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.085320Jy sigma=1.209083 ! Fit after self-cal, rms=0.085163Jy sigma=1.206501 ! Inverting map ! Added new window around map position (-18.6, 25.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00548876 Jy ! Component: 100 - total flux cleaned = 0.00601643 Jy ! Component: 150 - total flux cleaned = 0.00671015 Jy ! Component: 200 - total flux cleaned = 0.00801188 Jy ! Total flux subtracted in 200 components = 0.00801188 Jy ! Clean residual min=-0.009724 max=0.010002 Jy/beam ! Clean residual mean=-0.000001 rms=0.002223 Jy/beam ! Combined flux in latest and established models = 2.84043 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 234 components and 2.84043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.083211Jy sigma=1.172828 ! Fit after self-cal, rms=0.083056Jy sigma=1.170660 ! Inverting map ! Added new window around map position (-12, -35.1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00391194 Jy ! Component: 100 - total flux cleaned = 0.0036758 Jy ! Component: 150 - total flux cleaned = 0.00413324 Jy ! Component: 200 - total flux cleaned = 0.00414713 Jy ! Total flux subtracted in 200 components = 0.00414713 Jy ! Clean residual min=-0.009721 max=0.009325 Jy/beam ! Clean residual mean=-0.000002 rms=0.002114 Jy/beam ! Combined flux in latest and established models = 2.84457 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 250 components and 2.84457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.081234Jy sigma=1.139892 ! Fit after self-cal, rms=0.081126Jy sigma=1.138862 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.081126Jy sigma=1.138862 ! Fit after self-cal, rms=0.080691Jy sigma=1.131535 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.738 mas, bmaj=8.716 mas, bpa=0.8448 degrees ! Estimated noise=0.438613 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00333438 Jy ! Component: 100 - total flux cleaned = 0.00590138 Jy ! Component: 150 - total flux cleaned = 0.00808973 Jy ! Component: 200 - total flux cleaned = 0.00982497 Jy ! Total flux subtracted in 200 components = 0.00982497 Jy ! Clean residual min=-0.009068 max=0.010143 Jy/beam ! Clean residual mean=-0.000006 rms=0.002614 Jy/beam ! Combined flux in latest and established models = 2.8544 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 272 components and 2.8544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.080008Jy sigma=1.119146 ! Fit after self-cal, rms=0.079947Jy sigma=1.117569 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.04142e-05 Jy ! Component: 100 - total flux cleaned = 0.00156666 Jy ! Component: 150 - total flux cleaned = 0.00302154 Jy ! Component: 200 - total flux cleaned = 0.00419506 Jy ! Total flux subtracted in 200 components = 0.00419506 Jy ! Clean residual min=-0.008473 max=0.009637 Jy/beam ! Clean residual mean=-0.000006 rms=0.002455 Jy/beam ! Combined flux in latest and established models = 2.85859 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 288 components and 2.85859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.079604Jy sigma=1.110949 ! Fit after self-cal, rms=0.079519Jy sigma=1.109883 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.522 mas, bmaj=4 mas, bpa=-2.633 degrees ! Estimated noise=0.346408 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.522 x 4 at -2.633 degrees (North through East) ! Clean map min=-0.022463 max=1.1614 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.079519Jy sigma=1.109883 ! Fit after self-cal, rms=0.074227Jy sigma=1.039823 ! Inverting map and beam ! Estimated beam: bmin=1.522 mas, bmaj=3.999 mas, bpa=-2.599 degrees ! Estimated noise=0.346088 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000194249 Jy ! Component: 100 - total flux cleaned = -0.000396812 Jy ! Component: 150 - total flux cleaned = -0.000743066 Jy ! Component: 200 - total flux cleaned = -0.00106888 Jy ! Total flux subtracted in 200 components = -0.00106888 Jy ! Clean residual min=-0.009333 max=0.008905 Jy/beam ! Clean residual mean=-0.000004 rms=0.001917 Jy/beam ! Combined flux in latest and established models = 2.85752 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 303 components and 2.85752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.073213Jy sigma=1.024487 ! Fit after self-cal, rms=0.073081Jy sigma=1.023478 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00025289 Jy ! Component: 100 - total flux cleaned = 9.69957e-05 Jy ! Component: 150 - total flux cleaned = -5.86109e-05 Jy ! Component: 200 - total flux cleaned = -0.000211436 Jy ! Total flux subtracted in 200 components = -0.000211436 Jy ! Clean residual min=-0.009160 max=0.008626 Jy/beam ! Clean residual mean=-0.000004 rms=0.001879 Jy/beam ! Combined flux in latest and established models = 2.85731 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 318 components and 2.85731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.072383Jy sigma=1.012724 ! Fit after self-cal, rms=0.072296Jy sigma=1.012080 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.072296Jy sigma=1.012080 ! Fit after self-cal, rms=0.072200Jy sigma=1.011080 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.219 mas, bmaj=3.311 mas, bpa=-3.003 degrees ! Estimated noise=0.5437 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.942385 Jy ! Component: 100 - total flux cleaned = 1.41613 Jy ! Component: 150 - total flux cleaned = 1.71731 Jy ! Component: 200 - total flux cleaned = 1.91829 Jy ! Total flux subtracted in 200 components = 1.91829 Jy ! Clean residual min=-0.049664 max=0.112605 Jy/beam ! Clean residual mean=0.000035 rms=0.014398 Jy/beam ! Combined flux in latest and established models = 1.91829 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 1.91829 Jy ! Inverting map and beam ! Estimated beam: bmin=1.521 mas, bmaj=3.997 mas, bpa=-2.575 degrees ! Estimated noise=0.345725 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.254589 Jy ! Component: 100 - total flux cleaned = 0.417918 Jy ! Component: 150 - total flux cleaned = 0.531202 Jy ! Component: 200 - total flux cleaned = 0.611964 Jy ! Total flux subtracted in 200 components = 0.611964 Jy ! Clean residual min=-0.024385 max=0.047130 Jy/beam ! Clean residual mean=0.000007 rms=0.009644 Jy/beam ! Combined flux in latest and established models = 2.53026 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 88 components and 2.53026 Jy ! Inverting map ! Added new window around map position (20.7, -41.1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.058608 Jy ! Component: 100 - total flux cleaned = 0.103168 Jy ! Component: 150 - total flux cleaned = 0.138647 Jy ! Component: 200 - total flux cleaned = 0.167206 Jy ! Total flux subtracted in 200 components = 0.167206 Jy ! Clean residual min=-0.014493 max=0.020194 Jy/beam ! Clean residual mean=0.000002 rms=0.004797 Jy/beam ! Combined flux in latest and established models = 2.69746 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 139 components and 2.69746 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.738 mas, bmaj=8.715 mas, bpa=0.8561 degrees ! Estimated noise=0.438142 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0381901 Jy ! Component: 100 - total flux cleaned = 0.0650469 Jy ! Component: 150 - total flux cleaned = 0.0855287 Jy ! Component: 200 - total flux cleaned = 0.101473 Jy ! Total flux subtracted in 200 components = 0.101473 Jy ! Clean residual min=-0.010859 max=0.016241 Jy/beam ! Clean residual mean=-0.000008 rms=0.004466 Jy/beam ! Combined flux in latest and established models = 2.79893 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011804 Jy ! Component: 100 - total flux cleaned = 0.0190986 Jy ! Component: 150 - total flux cleaned = 0.0265112 Jy ! Component: 200 - total flux cleaned = 0.0329762 Jy ! Total flux subtracted in 200 components = 0.0329762 Jy ! Clean residual min=-0.009306 max=0.012810 Jy/beam ! Clean residual mean=-0.000010 rms=0.003290 Jy/beam ! Combined flux in latest and established models = 2.83191 Jy ! Adding 118 model components to the UV plane model. ! The established model now contains 245 components and 2.83191 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.521 mas, bmaj=3.997 mas, bpa=-2.575 degrees ! Estimated noise=0.345725 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257176 Jy ! Component: 100 - total flux cleaned = 0.0044721 Jy ! Component: 150 - total flux cleaned = 0.0068913 Jy ! Component: 200 - total flux cleaned = 0.00870045 Jy ! Total flux subtracted in 200 components = 0.00870045 Jy ! Clean residual min=-0.010198 max=0.011177 Jy/beam ! Clean residual mean=-0.000003 rms=0.002359 Jy/beam ! Combined flux in latest and established models = 2.84061 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 275 components and 2.84061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.083493Jy sigma=1.163267 ! Fit after self-cal, rms=0.080643Jy sigma=1.133916 wmodel J1517-2422_C_map.mod ! Writing 275 model components to file: J1517-2422_C_map.mod wobs J1517-2422_C_uvs.fits ! Writing UV FITS file: J1517-2422_C_uvs.fits wwins J1517-2422_C_map.win ! wwins: Wrote 13 windows to J1517-2422_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00309739 Jy ! Component: 100 - total flux cleaned = 0.00507754 Jy ! Component: 150 - total flux cleaned = 0.00611187 Jy ! Component: 200 - total flux cleaned = 0.00660951 Jy ! Component: 250 - total flux cleaned = 0.00661082 Jy ! Component: 300 - total flux cleaned = 0.00630035 Jy ! Component: 350 - total flux cleaned = 0.00585236 Jy ! Component: 400 - total flux cleaned = 0.00585257 Jy ! Component: 450 - total flux cleaned = 0.00557046 Jy ! Component: 500 - total flux cleaned = 0.00626425 Jy ! Component: 550 - total flux cleaned = 0.00626211 Jy ! Component: 600 - total flux cleaned = 0.0061309 Jy ! Component: 650 - total flux cleaned = 0.00678463 Jy ! Component: 700 - total flux cleaned = 0.00703841 Jy ! Component: 750 - total flux cleaned = 0.007289 Jy ! Component: 800 - total flux cleaned = 0.00753519 Jy ! Component: 850 - total flux cleaned = 0.00789927 Jy ! Component: 900 - total flux cleaned = 0.00813786 Jy ! Component: 950 - total flux cleaned = 0.0082581 Jy ! Component: 1000 - total flux cleaned = 0.00849189 Jy ! Component: 1050 - total flux cleaned = 0.00894896 Jy ! Component: 1100 - total flux cleaned = 0.00950584 Jy ! Component: 1150 - total flux cleaned = 0.00939787 Jy ! Component: 1200 - total flux cleaned = 0.0099426 Jy ! Component: 1250 - total flux cleaned = 0.0101593 Jy ! Component: 1300 - total flux cleaned = 0.0105848 Jy ! Component: 1350 - total flux cleaned = 0.0107949 Jy ! Component: 1400 - total flux cleaned = 0.0110019 Jy ! Component: 1450 - total flux cleaned = 0.0113074 Jy ! Component: 1500 - total flux cleaned = 0.0112067 Jy ! Component: 1550 - total flux cleaned = 0.0111097 Jy ! Component: 1600 - total flux cleaned = 0.0115036 Jy ! Component: 1650 - total flux cleaned = 0.0115053 Jy ! Component: 1700 - total flux cleaned = 0.0116008 Jy ! Component: 1750 - total flux cleaned = 0.0117914 Jy ! Component: 1800 - total flux cleaned = 0.0118833 Jy ! Component: 1850 - total flux cleaned = 0.011973 Jy ! Component: 1900 - total flux cleaned = 0.011696 Jy ! Component: 1950 - total flux cleaned = 0.0114256 Jy ! Component: 2000 - total flux cleaned = 0.0117841 Jy ! Component: 2050 - total flux cleaned = 0.0113411 Jy ! Component: 2100 - total flux cleaned = 0.01143 Jy ! Component: 2150 - total flux cleaned = 0.0113427 Jy ! Component: 2200 - total flux cleaned = 0.0111717 Jy ! Component: 2250 - total flux cleaned = 0.0115966 Jy ! Component: 2300 - total flux cleaned = 0.011764 Jy ! Component: 2350 - total flux cleaned = 0.011762 Jy ! Component: 2400 - total flux cleaned = 0.0115959 Jy ! Component: 2450 - total flux cleaned = 0.0119259 Jy ! Component: 2500 - total flux cleaned = 0.0118442 Jy ! Component: 2550 - total flux cleaned = 0.0117641 Jy ! Component: 2600 - total flux cleaned = 0.0118437 Jy ! Component: 2650 - total flux cleaned = 0.0117648 Jy ! Component: 2700 - total flux cleaned = 0.0120783 Jy ! Component: 2750 - total flux cleaned = 0.011845 Jy ! Component: 2800 - total flux cleaned = 0.0120764 Jy ! Component: 2850 - total flux cleaned = 0.0119236 Jy ! Component: 2900 - total flux cleaned = 0.0119998 Jy ! Component: 2950 - total flux cleaned = 0.0123017 Jy ! Component: 3000 - total flux cleaned = 0.0124514 Jy ! Component: 3050 - total flux cleaned = 0.0125249 Jy ! Component: 3100 - total flux cleaned = 0.0127469 Jy ! Component: 3150 - total flux cleaned = 0.0129654 Jy ! Component: 3200 - total flux cleaned = 0.013184 Jy ! Component: 3250 - total flux cleaned = 0.0132553 Jy ! Component: 3300 - total flux cleaned = 0.0131112 Jy ! Component: 3350 - total flux cleaned = 0.0133957 Jy ! Component: 3400 - total flux cleaned = 0.0133965 Jy ! Component: 3450 - total flux cleaned = 0.0137478 Jy ! Component: 3500 - total flux cleaned = 0.0140265 Jy ! Component: 3550 - total flux cleaned = 0.0142333 Jy ! Component: 3600 - total flux cleaned = 0.0146448 Jy ! Component: 3650 - total flux cleaned = 0.0145762 Jy ! Component: 3700 - total flux cleaned = 0.0146436 Jy ! Component: 3750 - total flux cleaned = 0.0150486 Jy ! Component: 3800 - total flux cleaned = 0.0153158 Jy ! Component: 3850 - total flux cleaned = 0.0156481 Jy ! Component: 3900 - total flux cleaned = 0.0157143 Jy ! Component: 3950 - total flux cleaned = 0.0161737 Jy ! Component: 4000 - total flux cleaned = 0.0163033 Jy ! Component: 4050 - total flux cleaned = 0.0166279 Jy ! Total flux subtracted in 4096 components = 0.0170787 Jy ! Clean residual min=-0.003213 max=0.003465 Jy/beam ! Clean residual mean=-0.000003 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 2.85769 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 559 components and 2.85769 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap .//J1517-2422_C_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.521 x 3.997 at -2.575 degrees (North through East) ! Clean map min=-0.007437 max=1.1882 Jy/beam ! Writing clean map to FITS file: .//J1517-2422_C_map.fits wmodel .//J1517-2422_C_map.mod ! Writing 559 model components to file: .//J1517-2422_C_map.mod wobs .//J1517-2422_C_uvs.fits ! Writing UV FITS file: .//J1517-2422_C_uvs.fits wwins .//J1517-2422_C_map.win ! wwins: Wrote 14 windows to .//J1517-2422_C_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.18816 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00116717 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.294702 0.294702 0.589404 1.17881 2.35762 4.71523 9.43046 18.8609 37.7219 75.4437 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0035 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.188 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1017.98 quit ! Quitting program ! Log file .//J1517-2422_C_dfm.log closed on Mon Jan 20 00:06:49 2020