! Started logfile: .//J1512-0905_C_dfm.log on Mon Jan 20 00:06:24 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     .//J1512-0905_C_uvm.fits
! Reading UV FITS file: .//J1512-0905_C_uvm.fits
! AN table 1: 17 integrations on 15 of 15 possible baselines.
! AN table 2: 17 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.913495 visibilities/baseline/integration-bin.
! Found source: J1512-0905
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 6336 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J1512-0905_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=2.391846Jy  sigma=50.892386
! Fit after  self-cal, rms=1.187382Jy  sigma=25.160679
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.385 mas, bmaj=3.614 mas, bpa=3.38 degrees
! Estimated noise=0.590692 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.61582 Jy
! Component: 100  -  total flux cleaned = 2.00867 Jy
! Total flux subtracted in 100 components = 2.00867 Jy
! Clean residual min=-0.058632 max=0.154901 Jy/beam
! Clean residual mean=0.000222 rms=0.018247 Jy/beam
! Combined flux in latest and established models = 2.00867 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 2.00867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.314500Jy  sigma=6.736964
! Fit after  self-cal, rms=0.314279Jy  sigma=6.729664
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.161171 Jy
! Component: 100  -  total flux cleaned = 0.241091 Jy
! Total flux subtracted in 100 components = 0.241091 Jy
! Clean residual min=-0.043087 max=0.105757 Jy/beam
! Clean residual mean=0.000090 rms=0.011339 Jy/beam
! Combined flux in latest and established models = 2.24976 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 22 components and 2.24976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.191185Jy  sigma=3.999460
! Fit after  self-cal, rms=0.190821Jy  sigma=3.984859
! Inverting map 
! Added new window around map position (-2.4, 2.7).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0859092 Jy
! Component: 100  -  total flux cleaned = 0.129102 Jy
! Total flux subtracted in 100 components = 0.129102 Jy
! Clean residual min=-0.036124 max=0.050858 Jy/beam
! Clean residual mean=0.000031 rms=0.008225 Jy/beam
! Combined flux in latest and established models = 2.37886 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 26 components and 2.37886 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.138976Jy  sigma=2.832809
! Fit after  self-cal, rms=0.132761Jy  sigma=2.722420
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.679 mas, bmaj=4.103 mas, bpa=2.412 degrees
! Estimated noise=0.431612 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0463207 Jy
! Component: 100  -  total flux cleaned = 0.0651468 Jy
! Component: 150  -  total flux cleaned = 0.0703642 Jy
! Component: 200  -  total flux cleaned = 0.0744797 Jy
! Total flux subtracted in 200 components = 0.0744797 Jy
! Clean residual min=-0.025321 max=0.026729 Jy/beam
! Clean residual mean=-0.000005 rms=0.005836 Jy/beam
! Combined flux in latest and established models = 2.45334 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 38 components and 2.45334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.115653Jy  sigma=2.335406
! Fit after  self-cal, rms=0.113080Jy  sigma=2.289580
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.679 x 4.103 at 2.412 degrees (North through East)
! Clean map  min=-0.023962  max=2.0569 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        0.99     LA        1.00     NL        1.00     
!   PT        0.98     SC        1.08     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.93     FD        1.01     KP        0.99     LA        0.99     
!   MK        1.05     NL        1.02     OV        0.99     PT        1.01     
!   SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        1.00     LA        0.99     NL        1.01     
!   PT        0.98     SC        1.09     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        1.00     KP        1.02     LA        1.01     
!   MK        1.05     NL        1.06     OV        1.00     PT        1.01     
!   SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.00     LA        0.99     NL        1.01     
!   PT        0.98     SC        1.03     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        0.99     KP        1.00     LA        1.01     
!   MK        1.06     NL        1.02     OV        0.99     PT        1.00     
!   SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        0.99     LA        1.00     NL        1.01     
!   PT        1.00     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        1.00     KP        1.00     LA        1.01     
!   MK        1.04     NL        1.02     OV        0.99     PT        1.00     
!   SC        0.96     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.01     LA        0.99     NL        1.01     
!   PT        0.98     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.09     FD        0.99     KP        1.00     LA        1.02     
!   MK        1.00     NL        0.97     OV        1.00     PT        1.01     
!   SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        1.00     LA        0.99     NL        1.02     
!   PT        0.98     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        0.99     KP        0.99     LA        1.01     
!   MK        0.94     NL        0.96     OV        0.99     PT        1.00     
!   SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.02     LA        1.00     NL        1.01     
!   PT        0.98     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        0.99     KP        0.99     LA        1.01     
!   MK        0.91     NL        0.95     OV        0.99     PT        1.00     
!   SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        1.02     LA        1.00     NL        1.02     
!   PT        0.98     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        0.99     KP        0.99     LA        1.01     
!   MK        0.89     NL        0.95     OV        0.99     PT        1.00     
!   SC        1.05     
! 
! 
! Fit before self-cal, rms=0.113080Jy  sigma=2.289580
! Fit after  self-cal, rms=0.071516Jy  sigma=1.408593
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.673 mas, bmaj=4.1 mas, bpa=2.181 degrees
! Estimated noise=0.430704 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.6, 6.9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00596069 Jy
! Component: 100  -  total flux cleaned = 0.00699256 Jy
! Component: 150  -  total flux cleaned = 0.00700019 Jy
! Component: 200  -  total flux cleaned = 0.00699491 Jy
! Total flux subtracted in 200 components = 0.00699491 Jy
! Clean residual min=-0.013075 max=0.014811 Jy/beam
! Clean residual mean=0.000006 rms=0.002827 Jy/beam
! Combined flux in latest and established models = 2.46033 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 55 components and 2.46033 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.064465Jy  sigma=1.264256
! Fit after  self-cal, rms=0.063842Jy  sigma=1.251675
! Inverting map 
! Added new window around map position (0.6, 8.1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.004978 Jy
! Component: 100  -  total flux cleaned = 0.00635577 Jy
! Component: 150  -  total flux cleaned = 0.00640433 Jy
! Component: 200  -  total flux cleaned = 0.00642088 Jy
! Total flux subtracted in 200 components = 0.00642088 Jy
! Clean residual min=-0.011330 max=0.010145 Jy/beam
! Clean residual mean=0.000007 rms=0.002365 Jy/beam
! Combined flux in latest and established models = 2.46675 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 67 components and 2.46675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.057880Jy  sigma=1.126542
! Fit after  self-cal, rms=0.057571Jy  sigma=1.119257
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.057571Jy  sigma=1.119257
! Fit after  self-cal, rms=0.056927Jy  sigma=1.109076
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.671 mas, bmaj=4.096 mas, bpa=2.164 degrees
! Estimated noise=0.43041 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00383889 Jy
! Component: 100  -  total flux cleaned = 0.00443041 Jy
! Component: 150  -  total flux cleaned = 0.00442959 Jy
! Component: 200  -  total flux cleaned = 0.00419974 Jy
! Total flux subtracted in 200 components = 0.00419974 Jy
! Clean residual min=-0.009929 max=0.008518 Jy/beam
! Clean residual mean=0.000009 rms=0.002051 Jy/beam
! Combined flux in latest and established models = 2.47095 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 77 components and 2.47095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.054052Jy  sigma=1.050138
! Fit after  self-cal, rms=0.053771Jy  sigma=1.043713
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000456878 Jy
! Component: 100  -  total flux cleaned = 0.000254079 Jy
! Component: 150  -  total flux cleaned = -0.00013303 Jy
! Component: 200  -  total flux cleaned = -0.000317874 Jy
! Total flux subtracted in 200 components = -0.000317874 Jy
! Clean residual min=-0.009503 max=0.008337 Jy/beam
! Clean residual mean=0.000007 rms=0.001904 Jy/beam
! Combined flux in latest and established models = 2.47063 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 87 components and 2.47063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052063Jy  sigma=1.009358
! Fit after  self-cal, rms=0.051856Jy  sigma=1.004090
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051856Jy  sigma=1.004090
! Fit after  self-cal, rms=0.051706Jy  sigma=1.000570
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.671 mas, bmaj=4.095 mas, bpa=2.135 degrees
! Estimated noise=0.43045 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000157835 Jy
! Component: 100  -  total flux cleaned = 0.000527977 Jy
! Component: 150  -  total flux cleaned = 0.000529153 Jy
! Component: 200  -  total flux cleaned = 0.000379835 Jy
! Total flux subtracted in 200 components = 0.000379835 Jy
! Clean residual min=-0.008690 max=0.007781 Jy/beam
! Clean residual mean=0.000009 rms=0.001754 Jy/beam
! Combined flux in latest and established models = 2.47101 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 94 components and 2.47102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050365Jy  sigma=0.972942
! Fit after  self-cal, rms=0.050156Jy  sigma=0.968067
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00021061 Jy
! Component: 100  -  total flux cleaned = 7.81966e-05 Jy
! Component: 150  -  total flux cleaned = -0.000443762 Jy
! Component: 200  -  total flux cleaned = -0.000444875 Jy
! Total flux subtracted in 200 components = -0.000444875 Jy
! Clean residual min=-0.008287 max=0.007741 Jy/beam
! Clean residual mean=0.000008 rms=0.001664 Jy/beam
! Combined flux in latest and established models = 2.47057 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 106 components and 2.47057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.049238Jy  sigma=0.949731
! Fit after  self-cal, rms=0.049088Jy  sigma=0.945908
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.049088Jy  sigma=0.945908
! Fit after  self-cal, rms=0.049014Jy  sigma=0.943786
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.85 mas, bmaj=6.825 mas, bpa=0.9858 degrees
! Estimated noise=0.54541 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00332875 Jy
! Component: 100  -  total flux cleaned = 0.00369891 Jy
! Component: 150  -  total flux cleaned = 0.00381087 Jy
! Component: 200  -  total flux cleaned = 0.00401869 Jy
! Total flux subtracted in 200 components = 0.00401869 Jy
! Clean residual min=-0.007239 max=0.006507 Jy/beam
! Clean residual mean=0.000016 rms=0.001690 Jy/beam
! Combined flux in latest and established models = 2.47459 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 115 components and 2.47459 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048461Jy  sigma=0.933725
! Fit after  self-cal, rms=0.048430Jy  sigma=0.932968
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000106933 Jy
! Component: 100  -  total flux cleaned = 0.000197209 Jy
! Component: 150  -  total flux cleaned = 0.000374532 Jy
! Component: 200  -  total flux cleaned = 0.000542644 Jy
! Total flux subtracted in 200 components = 0.000542644 Jy
! Clean residual min=-0.006955 max=0.006364 Jy/beam
! Clean residual mean=0.000015 rms=0.001642 Jy/beam
! Combined flux in latest and established models = 2.47513 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 122 components and 2.47513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048092Jy  sigma=0.927126
! Fit after  self-cal, rms=0.048072Jy  sigma=0.926390
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.67 mas, bmaj=4.094 mas, bpa=2.104 degrees
! Estimated noise=0.430511 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.67 x 4.094 at 2.104 degrees (North through East)
! Clean map  min=-0.014982  max=2.0534 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048072Jy  sigma=0.926390
! Fit after  self-cal, rms=0.042972Jy  sigma=0.827528
! Inverting map and beam 
! Estimated beam: bmin=1.67 mas, bmaj=4.094 mas, bpa=2.094 degrees
! Estimated noise=0.430631 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00127996 Jy
! Component: 100  -  total flux cleaned = -0.000758817 Jy
! Component: 150  -  total flux cleaned = -0.000523897 Jy
! Component: 200  -  total flux cleaned = -0.000524831 Jy
! Total flux subtracted in 200 components = -0.000524831 Jy
! Clean residual min=-0.006683 max=0.007210 Jy/beam
! Clean residual mean=0.000010 rms=0.001478 Jy/beam
! Combined flux in latest and established models = 2.47461 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 130 components and 2.47461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042212Jy  sigma=0.810806
! Fit after  self-cal, rms=0.042098Jy  sigma=0.808000
! Inverting map 
! Added new window around map position (-3.3, 21.9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00632929 Jy
! Component: 100  -  total flux cleaned = 0.0074438 Jy
! Component: 150  -  total flux cleaned = 0.00796417 Jy
! Component: 200  -  total flux cleaned = 0.0077277 Jy
! Total flux subtracted in 200 components = 0.0077277 Jy
! Clean residual min=-0.006151 max=0.005721 Jy/beam
! Clean residual mean=0.000010 rms=0.001338 Jy/beam
! Combined flux in latest and established models = 2.48233 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 149 components and 2.48233 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040839Jy  sigma=0.778889
! Fit after  self-cal, rms=0.040773Jy  sigma=0.777372
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040773Jy  sigma=0.777372
! Fit after  self-cal, rms=0.040743Jy  sigma=0.775956
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.377 mas, bmaj=3.604 mas, bpa=3.06 degrees
! Estimated noise=0.587295 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.60539 Jy
! Component: 100  -  total flux cleaned = 2.00161 Jy
! Component: 150  -  total flux cleaned = 2.17962 Jy
! Component: 200  -  total flux cleaned = 2.28008 Jy
! Total flux subtracted in 200 components = 2.28008 Jy
! Clean residual min=-0.028629 max=0.050837 Jy/beam
! Clean residual mean=0.000089 rms=0.007294 Jy/beam
! Combined flux in latest and established models = 2.28008 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 2.28008 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.67 mas, bmaj=4.094 mas, bpa=2.077 degrees
! Estimated noise=0.430609 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0826045 Jy
! Component: 100  -  total flux cleaned = 0.128616 Jy
! Component: 150  -  total flux cleaned = 0.156887 Jy
! Component: 200  -  total flux cleaned = 0.169866 Jy
! Total flux subtracted in 200 components = 0.169866 Jy
! Clean residual min=-0.012378 max=0.019082 Jy/beam
! Clean residual mean=0.000036 rms=0.002929 Jy/beam
! Combined flux in latest and established models = 2.44994 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 47 components and 2.44994 Jy
! Inverting map 
! Added new window around map position (1.8, -3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0137203 Jy
! Component: 100  -  total flux cleaned = 0.0189429 Jy
! Component: 150  -  total flux cleaned = 0.0202991 Jy
! Component: 200  -  total flux cleaned = 0.0219212 Jy
! Total flux subtracted in 200 components = 0.0219212 Jy
! Clean residual min=-0.009533 max=0.009283 Jy/beam
! Clean residual mean=0.000016 rms=0.002117 Jy/beam
! Combined flux in latest and established models = 2.47186 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 69 components and 2.47186 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.849 mas, bmaj=6.825 mas, bpa=0.967 degrees
! Estimated noise=0.545654 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00237359 Jy
! Component: 100  -  total flux cleaned = 0.0023698 Jy
! Component: 150  -  total flux cleaned = 0.00262727 Jy
! Component: 200  -  total flux cleaned = 0.00240894 Jy
! Total flux subtracted in 200 components = 0.00240894 Jy
! Clean residual min=-0.006974 max=0.007515 Jy/beam
! Clean residual mean=0.000018 rms=0.001752 Jy/beam
! Combined flux in latest and established models = 2.47427 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-10.5, -1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00367681 Jy
! Component: 100  -  total flux cleaned = 0.00483532 Jy
! Component: 150  -  total flux cleaned = 0.00523215 Jy
! Component: 200  -  total flux cleaned = 0.00542564 Jy
! Total flux subtracted in 200 components = 0.00542564 Jy
! Clean residual min=-0.005535 max=0.005667 Jy/beam
! Clean residual mean=0.000001 rms=0.001424 Jy/beam
! Combined flux in latest and established models = 2.4797 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 116 components and 2.4797 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.67 mas, bmaj=4.094 mas, bpa=2.077 degrees
! Estimated noise=0.430609 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000246248 Jy
! Component: 100  -  total flux cleaned = -0.000268897 Jy
! Component: 150  -  total flux cleaned = -0.000268647 Jy
! Component: 200  -  total flux cleaned = -3.96948e-05 Jy
! Total flux subtracted in 200 components = -3.96948e-05 Jy
! Clean residual min=-0.006685 max=0.006662 Jy/beam
! Clean residual mean=-0.000000 rms=0.001459 Jy/beam
! Combined flux in latest and established models = 2.47966 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 144 components and 2.47966 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042708Jy  sigma=0.824371
! Fit after  self-cal, rms=0.041859Jy  sigma=0.804585
wmodel J1512-0905_C_map.mod
! Writing 144 model components to file: J1512-0905_C_map.mod
wobs   J1512-0905_C_uvs.fits
! Writing UV FITS file: J1512-0905_C_uvs.fits
wwins  J1512-0905_C_map.win
! wwins: Wrote 7 windows to J1512-0905_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00179463 Jy
! Component: 100  -  total flux cleaned = 0.00247348 Jy
! Component: 150  -  total flux cleaned = 0.00279305 Jy
! Component: 200  -  total flux cleaned = 0.00299536 Jy
! Component: 250  -  total flux cleaned = 0.00308917 Jy
! Component: 300  -  total flux cleaned = 0.0033578 Jy
! Component: 350  -  total flux cleaned = 0.00335517 Jy
! Component: 400  -  total flux cleaned = 0.0035197 Jy
! Component: 450  -  total flux cleaned = 0.00351891 Jy
! Component: 500  -  total flux cleaned = 0.00359724 Jy
! Component: 550  -  total flux cleaned = 0.0035235 Jy
! Component: 600  -  total flux cleaned = 0.00352536 Jy
! Component: 650  -  total flux cleaned = 0.00338308 Jy
! Component: 700  -  total flux cleaned = 0.00310817 Jy
! Component: 750  -  total flux cleaned = 0.00297628 Jy
! Component: 800  -  total flux cleaned = 0.00297609 Jy
! Component: 850  -  total flux cleaned = 0.0029117 Jy
! Component: 900  -  total flux cleaned = 0.0029736 Jy
! Component: 950  -  total flux cleaned = 0.00309337 Jy
! Component: 1000  -  total flux cleaned = 0.00297303 Jy
! Component: 1050  -  total flux cleaned = 0.00314994 Jy
! Component: 1100  -  total flux cleaned = 0.00309336 Jy
! Component: 1150  -  total flux cleaned = 0.00315053 Jy
! Component: 1200  -  total flux cleaned = 0.00320714 Jy
! Component: 1250  -  total flux cleaned = 0.00336831 Jy
! Component: 1300  -  total flux cleaned = 0.00347091 Jy
! Component: 1350  -  total flux cleaned = 0.0032634 Jy
! Component: 1400  -  total flux cleaned = 0.00321258 Jy
! Component: 1450  -  total flux cleaned = 0.00316312 Jy
! Component: 1500  -  total flux cleaned = 0.00311549 Jy
! Component: 1550  -  total flux cleaned = 0.00306577 Jy
! Component: 1600  -  total flux cleaned = 0.00287729 Jy
! Component: 1650  -  total flux cleaned = 0.00278499 Jy
! Component: 1700  -  total flux cleaned = 0.00278552 Jy
! Component: 1750  -  total flux cleaned = 0.00274023 Jy
! Component: 1800  -  total flux cleaned = 0.00269562 Jy
! Component: 1850  -  total flux cleaned = 0.00252522 Jy
! Component: 1900  -  total flux cleaned = 0.00265281 Jy
! Component: 1950  -  total flux cleaned = 0.00248749 Jy
! Component: 2000  -  total flux cleaned = 0.00256879 Jy
! Component: 2050  -  total flux cleaned = 0.00236846 Jy
! Component: 2100  -  total flux cleaned = 0.002408 Jy
! Component: 2150  -  total flux cleaned = 0.00233027 Jy
! Component: 2200  -  total flux cleaned = 0.00221608 Jy
! Component: 2250  -  total flux cleaned = 0.00214145 Jy
! Component: 2300  -  total flux cleaned = 0.00206724 Jy
! Component: 2350  -  total flux cleaned = 0.00203181 Jy
! Component: 2400  -  total flux cleaned = 0.00185197 Jy
! Component: 2450  -  total flux cleaned = 0.00188699 Jy
! Component: 2500  -  total flux cleaned = 0.00171228 Jy
! Component: 2550  -  total flux cleaned = 0.00167844 Jy
! Component: 2600  -  total flux cleaned = 0.00171251 Jy
! Component: 2650  -  total flux cleaned = 0.00167859 Jy
! Component: 2700  -  total flux cleaned = 0.00171139 Jy
! Component: 2750  -  total flux cleaned = 0.00164626 Jy
! Component: 2800  -  total flux cleaned = 0.00161469 Jy
! Component: 2850  -  total flux cleaned = 0.00177285 Jy
! Component: 2900  -  total flux cleaned = 0.00167918 Jy
! Component: 2950  -  total flux cleaned = 0.00174053 Jy
! Component: 3000  -  total flux cleaned = 0.00161853 Jy
! Component: 3050  -  total flux cleaned = 0.0017388 Jy
! Component: 3100  -  total flux cleaned = 0.00164983 Jy
! Component: 3150  -  total flux cleaned = 0.00176594 Jy
! Component: 3200  -  total flux cleaned = 0.00165075 Jy
! Component: 3250  -  total flux cleaned = 0.00159376 Jy
! Component: 3300  -  total flux cleaned = 0.00170542 Jy
! Component: 3350  -  total flux cleaned = 0.00156742 Jy
! Component: 3400  -  total flux cleaned = 0.00159452 Jy
! Component: 3450  -  total flux cleaned = 0.00154123 Jy
! Component: 3500  -  total flux cleaned = 0.00151475 Jy
! Component: 3550  -  total flux cleaned = 0.00148822 Jy
! Component: 3600  -  total flux cleaned = 0.00151344 Jy
! Component: 3650  -  total flux cleaned = 0.00141103 Jy
! Component: 3700  -  total flux cleaned = 0.00146154 Jy
! Component: 3750  -  total flux cleaned = 0.00141131 Jy
! Component: 3800  -  total flux cleaned = 0.00145998 Jy
! Component: 3850  -  total flux cleaned = 0.00138646 Jy
! Component: 3900  -  total flux cleaned = 0.00131412 Jy
! Component: 3950  -  total flux cleaned = 0.00129035 Jy
! Component: 4000  -  total flux cleaned = 0.00131355 Jy
! Component: 4050  -  total flux cleaned = 0.0011742 Jy
! Total flux subtracted in 4096 components = 0.00117471 Jy
! Clean residual min=-0.001160 max=0.001295 Jy/beam
! Clean residual mean=0.000004 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 2.48083 Jy
keep
! Adding 256 model components to the UV plane model.
! The established model now contains 394 components and 2.48083 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   .//J1512-0905_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.67 x 4.094 at 2.077 degrees (North through East)
! Clean map  min=-0.011015  max=2.0462 Jy/beam
! Writing clean map to FITS file: .//J1512-0905_C_map.fits
wmodel .//J1512-0905_C_map.mod
! Writing 394 model components to file: .//J1512-0905_C_map.mod
wobs   .//J1512-0905_C_uvs.fits
! Writing UV FITS file: .//J1512-0905_C_uvs.fits
wwins  .//J1512-0905_C_map.win
! wwins: Wrote 8 windows to .//J1512-0905_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 2.04624 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000405869 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0595045 0.0595045 0.119009 0.238018 0.476036 0.952073 1.90415 3.80829 7.61658 15.2332 30.4663 60.9327
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       2.046 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  5041.63 
quit
! Quitting program
! Log file .//J1512-0905_C_dfm.log closed on Mon Jan 20 00:06:28 2020