! Started logfile: .//J0726+7911_X_dfm.log on Mon Jan 20 00:01:31 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs .//J0726+7911_X_uvm.fits ! Reading UV FITS file: .//J0726+7911_X_uvm.fits ! AN table 1: 21 integrations on 15 of 15 possible baselines. ! AN table 2: 33 integrations on 36 of 36 possible baselines. ! AN table 3: 17 integrations on 28 of 28 possible baselines. ! AN table 4: 34 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.876054 visibilities/baseline/integration-bin. ! Found source: J0726+7911 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 67 lines of history. ! ! Reading 22448 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0726+7911_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.212070Jy sigma=21.852871 ! Fit after self-cal, rms=0.361683Jy sigma=6.447491 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8925 mas, bmaj=1.057 mas, bpa=88.06 degrees ! Estimated noise=0.541497 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.46253 Jy ! Component: 100 - total flux cleaned = 0.60709 Jy ! Total flux subtracted in 100 components = 0.60709 Jy ! Clean residual min=-0.026019 max=0.065184 Jy/beam ! Clean residual mean=0.000113 rms=0.005541 Jy/beam ! Combined flux in latest and established models = 0.60709 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.60709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.159370Jy sigma=2.837737 ! Fit after self-cal, rms=0.159354Jy sigma=2.837401 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0749079 Jy ! Component: 100 - total flux cleaned = 0.118647 Jy ! Total flux subtracted in 100 components = 0.118647 Jy ! Clean residual min=-0.016568 max=0.022208 Jy/beam ! Clean residual mean=0.000064 rms=0.003270 Jy/beam ! Combined flux in latest and established models = 0.725737 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 17 components and 0.725737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.098763Jy sigma=1.707337 ! Fit after self-cal, rms=0.098716Jy sigma=1.706173 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0268299 Jy ! Component: 100 - total flux cleaned = 0.0440048 Jy ! Total flux subtracted in 100 components = 0.0440048 Jy ! Clean residual min=-0.013861 max=0.017633 Jy/beam ! Clean residual mean=0.000046 rms=0.002862 Jy/beam ! Combined flux in latest and established models = 0.769741 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 23 components and 0.769742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.090188Jy sigma=1.534683 ! Fit after self-cal, rms=0.090174Jy sigma=1.534319 ! Inverting map ! Added new window around map position (4.8, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171886 Jy ! Component: 100 - total flux cleaned = 0.0284459 Jy ! Total flux subtracted in 100 components = 0.0284459 Jy ! Clean residual min=-0.013152 max=0.016430 Jy/beam ! Clean residual mean=0.000035 rms=0.002654 Jy/beam ! Combined flux in latest and established models = 0.798187 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 34 components and 0.798187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.086625Jy sigma=1.467157 ! Fit after self-cal, rms=0.086183Jy sigma=1.458878 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.319 mas, bmaj=1.503 mas, bpa=62.4 degrees ! Estimated noise=0.268004 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111889 Jy ! Component: 100 - total flux cleaned = 0.0129215 Jy ! Component: 150 - total flux cleaned = 0.0137495 Jy ! Component: 200 - total flux cleaned = 0.0142063 Jy ! Total flux subtracted in 200 components = 0.0142063 Jy ! Clean residual min=-0.018720 max=0.020368 Jy/beam ! Clean residual mean=0.000102 rms=0.004196 Jy/beam ! Combined flux in latest and established models = 0.812394 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 47 components and 0.812394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.084732Jy sigma=1.433464 ! Fit after self-cal, rms=0.084434Jy sigma=1.428041 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.319 x 1.503 at 62.4 degrees (North through East) ! Clean map min=-0.018454 max=0.64992 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 KP 1.02 NL 0.90 ! OV 1.07 PT 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 1.05 KP 1.00 LA 0.98 ! MK 1.01 NL 0.89 OV 1.06 PT 0.90 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.97 HN 0.98 KP 1.19 ! LA 1.00 NL 0.92 OV 1.10 PT 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.06 FD 0.99 HN 1.06 KP 1.05 ! LA 1.02 MK 1.03 NL 0.92 OV 1.11 ! PT 0.94 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 KP 1.02 NL 0.92 ! OV 1.06 PT 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 1.05 KP 1.00 LA 0.98 ! MK 1.02 NL 0.89 OV 1.06 PT 0.90 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.99 HN 0.98 KP 1.17 ! LA 0.99 NL 0.91 OV 1.11 PT 0.95 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 FD 0.98 HN 1.07 KP 1.08 ! LA 1.01 MK 1.02 NL 0.91 OV 1.09 ! PT 0.95 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 KP 1.02 NL 0.92 ! OV 1.08 PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 1.05 KP 1.00 LA 0.98 ! MK 1.01 NL 0.90 OV 1.07 PT 0.90 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.96 HN 1.00 KP 1.19 ! LA 1.02 NL 0.91 OV 1.09 PT 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 FD 0.99 HN 1.06 KP 1.05 ! LA 1.02 MK 1.03 NL 0.92 OV 1.10 ! PT 0.94 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 KP 1.03 NL 0.92 ! OV 1.07 PT 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 1.04 KP 1.00 LA 0.97 ! MK 1.02 NL 0.89 OV 1.07 PT 0.90 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.97 HN 0.98 KP 1.19 ! LA 1.00 NL 0.92 OV 1.11 PT 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 FD 1.02 HN 1.06 KP 1.06 ! LA 1.04 MK 1.02 NL 0.92 OV 1.09 ! PT 0.94 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 KP 1.04 NL 0.90 ! OV 1.08 PT 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 1.05 KP 0.98 LA 0.97 ! MK 1.04 NL 0.89 OV 1.07 PT 0.90 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.98 HN 1.01 KP 1.25 ! LA 1.03 NL 0.92 OV 1.09 PT 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 FD 1.01 HN 1.07 KP 1.07 ! LA 1.02 MK 0.97 NL 0.90 OV 1.09 ! PT 0.95 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 KP 1.04 NL 0.93 ! OV 1.08 PT 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 1.05 KP 0.98 LA 0.98 ! MK 1.04 NL 0.89 OV 1.07 PT 0.90 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.99 HN 1.01 KP 1.28 ! LA 1.02 NL 0.91 OV 1.13 PT 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 FD 1.01 HN 1.08 KP 1.08 ! LA 1.03 MK 0.97 NL 0.89 OV 1.10 ! PT 0.95 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 KP 1.04 NL 0.92 ! OV 1.07 PT 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 1.05 KP 1.00 LA 0.98 ! MK 1.04 NL 0.89 OV 1.07 PT 0.90 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.97 HN 0.99 KP 1.24 ! LA 1.01 NL 0.93 OV 1.10 PT 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 FD 1.01 HN 1.08 KP 1.07 ! LA 1.04 MK 0.95 NL 0.89 OV 1.09 ! PT 0.93 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 KP 1.03 NL 0.92 ! OV 1.08 PT 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 1.05 KP 1.00 LA 0.98 ! MK 1.05 NL 0.89 OV 1.07 PT 0.90 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.98 HN 0.98 KP 1.23 ! LA 1.04 NL 0.92 OV 1.09 PT 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 FD 1.03 HN 1.09 KP 1.07 ! LA 1.03 MK 0.95 NL 0.87 OV 1.08 ! PT 0.95 ! ! ! Fit before self-cal, rms=0.084434Jy sigma=1.428041 ! Fit after self-cal, rms=0.059356Jy sigma=0.948933 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.324 mas, bmaj=1.515 mas, bpa=62.41 degrees ! Estimated noise=0.269509 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0106913 Jy ! Component: 100 - total flux cleaned = -0.0147054 Jy ! Component: 150 - total flux cleaned = -0.0155631 Jy ! Component: 200 - total flux cleaned = -0.0162287 Jy ! Total flux subtracted in 200 components = -0.0162287 Jy ! Clean residual min=-0.006053 max=0.006577 Jy/beam ! Clean residual mean=0.000020 rms=0.001368 Jy/beam ! Combined flux in latest and established models = 0.796165 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.796165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.057426Jy sigma=0.914530 ! Fit after self-cal, rms=0.057221Jy sigma=0.910333 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.057221Jy sigma=0.910333 ! Fit after self-cal, rms=0.047349Jy sigma=0.712717 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.324 mas, bmaj=1.515 mas, bpa=62.5 degrees ! Estimated noise=0.269118 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0045626 Jy ! Component: 100 - total flux cleaned = -0.00524494 Jy ! Component: 150 - total flux cleaned = -0.00563256 Jy ! Component: 200 - total flux cleaned = -0.00589384 Jy ! Total flux subtracted in 200 components = -0.00589384 Jy ! Clean residual min=-0.003372 max=0.002495 Jy/beam ! Clean residual mean=0.000006 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.790271 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 61 components and 0.790271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.046842Jy sigma=0.703739 ! Fit after self-cal, rms=0.046743Jy sigma=0.701889 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00149804 Jy ! Component: 100 - total flux cleaned = -0.00172701 Jy ! Component: 150 - total flux cleaned = -0.00194698 Jy ! Component: 200 - total flux cleaned = -0.00213124 Jy ! Total flux subtracted in 200 components = -0.00213124 Jy ! Clean residual min=-0.002997 max=0.002464 Jy/beam ! Clean residual mean=0.000009 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.78814 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 63 components and 0.78814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.046628Jy sigma=0.699954 ! Fit after self-cal, rms=0.046606Jy sigma=0.699603 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.046606Jy sigma=0.699603 ! Fit after self-cal, rms=0.046458Jy sigma=0.696284 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.324 mas, bmaj=1.515 mas, bpa=62.83 degrees ! Estimated noise=0.269069 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0020747 Jy ! Component: 100 - total flux cleaned = -0.00235187 Jy ! Component: 150 - total flux cleaned = -0.00253996 Jy ! Component: 200 - total flux cleaned = -0.00260655 Jy ! Total flux subtracted in 200 components = -0.00260655 Jy ! Clean residual min=-0.002725 max=0.002146 Jy/beam ! Clean residual mean=0.000002 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.785533 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 67 components and 0.785533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.046316Jy sigma=0.693828 ! Fit after self-cal, rms=0.046288Jy sigma=0.693324 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000771157 Jy ! Component: 100 - total flux cleaned = -0.00080445 Jy ! Component: 150 - total flux cleaned = -0.000776764 Jy ! Component: 200 - total flux cleaned = -0.000777842 Jy ! Total flux subtracted in 200 components = -0.000777842 Jy ! Clean residual min=-0.002490 max=0.002123 Jy/beam ! Clean residual mean=0.000004 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.784755 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 68 components and 0.784755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.046241Jy sigma=0.692460 ! Fit after self-cal, rms=0.046234Jy sigma=0.692347 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.046234Jy sigma=0.692347 ! Fit after self-cal, rms=0.046190Jy sigma=0.691416 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.608 mas, bmaj=3.285 mas, bpa=33.49 degrees ! Estimated noise=0.323661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00149084 Jy ! Component: 100 - total flux cleaned = -0.00152109 Jy ! Component: 150 - total flux cleaned = -0.00147451 Jy ! Component: 200 - total flux cleaned = -0.00148724 Jy ! Total flux subtracted in 200 components = -0.00148724 Jy ! Clean residual min=-0.002174 max=0.002030 Jy/beam ! Clean residual mean=0.000003 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.783268 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 72 components and 0.783268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.046164Jy sigma=0.690987 ! Fit after self-cal, rms=0.046150Jy sigma=0.690730 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 9.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199378 Jy ! Component: 100 - total flux cleaned = 0.00275412 Jy ! Component: 150 - total flux cleaned = 0.00302601 Jy ! Component: 200 - total flux cleaned = 0.00323257 Jy ! Total flux subtracted in 200 components = 0.00323257 Jy ! Clean residual min=-0.001705 max=0.001342 Jy/beam ! Clean residual mean=-0.000006 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.786501 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 103 components and 0.786501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.046073Jy sigma=0.689412 ! Fit after self-cal, rms=0.046068Jy sigma=0.689347 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.324 mas, bmaj=1.514 mas, bpa=63.18 degrees ! Estimated noise=0.269025 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.324 x 1.514 at 63.18 degrees (North through East) ! Clean map min=-0.0043835 max=0.6581 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.046068Jy sigma=0.689347 ! Fit after self-cal, rms=0.042255Jy sigma=0.628727 ! Inverting map and beam ! Estimated beam: bmin=1.324 mas, bmaj=1.514 mas, bpa=63.11 degrees ! Estimated noise=0.268808 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000650794 Jy ! Component: 100 - total flux cleaned = 0.000652804 Jy ! Component: 150 - total flux cleaned = 0.000603387 Jy ! Component: 200 - total flux cleaned = 0.000512361 Jy ! Total flux subtracted in 200 components = 0.000512361 Jy ! Clean residual min=-0.001736 max=0.001612 Jy/beam ! Clean residual mean=-0.000004 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.787013 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 124 components and 0.787013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.042144Jy sigma=0.626332 ! Fit after self-cal, rms=0.042142Jy sigma=0.626282 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000210959 Jy ! Component: 100 - total flux cleaned = -0.0002482 Jy ! Component: 150 - total flux cleaned = -0.000211562 Jy ! Component: 200 - total flux cleaned = -0.000213568 Jy ! Total flux subtracted in 200 components = -0.000213568 Jy ! Clean residual min=-0.001554 max=0.001558 Jy/beam ! Clean residual mean=-0.000004 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.786799 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 134 components and 0.786799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.042082Jy sigma=0.625051 ! Fit after self-cal, rms=0.042081Jy sigma=0.625033 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.042081Jy sigma=0.625033 ! Fit after self-cal, rms=0.042066Jy sigma=0.624949 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8985 mas, bmaj=1.069 mas, bpa=87.83 degrees ! Estimated noise=0.54354 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.463723 Jy ! Component: 100 - total flux cleaned = 0.604394 Jy ! Component: 150 - total flux cleaned = 0.67644 Jy ! Component: 200 - total flux cleaned = 0.718072 Jy ! Total flux subtracted in 200 components = 0.718072 Jy ! Clean residual min=-0.008025 max=0.020661 Jy/beam ! Clean residual mean=0.000031 rms=0.001788 Jy/beam ! Combined flux in latest and established models = 0.718072 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.718072 Jy ! Inverting map and beam ! Estimated beam: bmin=1.324 mas, bmaj=1.514 mas, bpa=63.09 degrees ! Estimated noise=0.268752 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0345631 Jy ! Component: 100 - total flux cleaned = 0.0492509 Jy ! Component: 150 - total flux cleaned = 0.0560687 Jy ! Component: 200 - total flux cleaned = 0.0599099 Jy ! Total flux subtracted in 200 components = 0.0599099 Jy ! Clean residual min=-0.002851 max=0.003300 Jy/beam ! Clean residual mean=0.000011 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.777982 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 34 components and 0.777982 Jy ! Inverting map ! Added new window around map position (1.6, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215618 Jy ! Component: 100 - total flux cleaned = 0.00359934 Jy ! Component: 150 - total flux cleaned = 0.00423092 Jy ! Component: 200 - total flux cleaned = 0.00473438 Jy ! Total flux subtracted in 200 components = 0.00473438 Jy ! Clean residual min=-0.002253 max=0.002106 Jy/beam ! Clean residual mean=0.000002 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.782716 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 56 components and 0.782716 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.608 mas, bmaj=3.285 mas, bpa=33.46 degrees ! Estimated noise=0.323357 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144486 Jy ! Component: 100 - total flux cleaned = 0.00243338 Jy ! Component: 150 - total flux cleaned = 0.00286722 Jy ! Component: 200 - total flux cleaned = 0.00300107 Jy ! Total flux subtracted in 200 components = 0.00300107 Jy ! Clean residual min=-0.001108 max=0.001165 Jy/beam ! Clean residual mean=-0.000005 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.785717 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00012135 Jy ! Component: 100 - total flux cleaned = 0.00016636 Jy ! Component: 150 - total flux cleaned = 0.00020825 Jy ! Component: 200 - total flux cleaned = 0.000247933 Jy ! Total flux subtracted in 200 components = 0.000247933 Jy ! Clean residual min=-0.001098 max=0.001151 Jy/beam ! Clean residual mean=-0.000005 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.785965 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 84 components and 0.785965 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.324 mas, bmaj=1.514 mas, bpa=63.09 degrees ! Estimated noise=0.268752 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000413063 Jy ! Component: 100 - total flux cleaned = -0.000360018 Jy ! Component: 150 - total flux cleaned = -0.000306793 Jy ! Component: 200 - total flux cleaned = -0.000358933 Jy ! Total flux subtracted in 200 components = -0.000358933 Jy ! Clean residual min=-0.001754 max=0.001836 Jy/beam ! Clean residual mean=-0.000002 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.785606 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 95 components and 0.785606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.042407Jy sigma=0.630807 ! Fit after self-cal, rms=0.042378Jy sigma=0.630233 wmodel J0726+7911_X_map.mod ! Writing 95 model components to file: J0726+7911_X_map.mod wobs J0726+7911_X_uvs.fits ! Writing UV FITS file: J0726+7911_X_uvs.fits wwins J0726+7911_X_map.win ! wwins: Wrote 4 windows to J0726+7911_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00048555 Jy ! Component: 100 - total flux cleaned = 0.000571962 Jy ! Component: 150 - total flux cleaned = 0.000652237 Jy ! Component: 200 - total flux cleaned = 0.000756408 Jy ! Component: 250 - total flux cleaned = 0.000882261 Jy ! Component: 300 - total flux cleaned = 0.00100355 Jy ! Component: 350 - total flux cleaned = 0.00107404 Jy ! Component: 400 - total flux cleaned = 0.00111983 Jy ! Component: 450 - total flux cleaned = 0.00116402 Jy ! Component: 500 - total flux cleaned = 0.00118568 Jy ! Component: 550 - total flux cleaned = 0.00129213 Jy ! Component: 600 - total flux cleaned = 0.00137557 Jy ! Component: 650 - total flux cleaned = 0.00151898 Jy ! Component: 700 - total flux cleaned = 0.00161954 Jy ! Component: 750 - total flux cleaned = 0.00173825 Jy ! Component: 800 - total flux cleaned = 0.00187413 Jy ! Component: 850 - total flux cleaned = 0.00196957 Jy ! Component: 900 - total flux cleaned = 0.00208259 Jy ! Component: 950 - total flux cleaned = 0.00213822 Jy ! Component: 1000 - total flux cleaned = 0.00228457 Jy ! Component: 1050 - total flux cleaned = 0.00237448 Jy ! Component: 1100 - total flux cleaned = 0.00244543 Jy ! Component: 1150 - total flux cleaned = 0.00255061 Jy ! Component: 1200 - total flux cleaned = 0.00263689 Jy ! Component: 1250 - total flux cleaned = 0.00279062 Jy ! Component: 1300 - total flux cleaned = 0.00285797 Jy ! Component: 1350 - total flux cleaned = 0.002958 Jy ! Component: 1400 - total flux cleaned = 0.00305683 Jy ! Component: 1450 - total flux cleaned = 0.00317097 Jy ! Component: 1500 - total flux cleaned = 0.00325143 Jy ! Component: 1550 - total flux cleaned = 0.003347 Jy ! Component: 1600 - total flux cleaned = 0.00339422 Jy ! Component: 1650 - total flux cleaned = 0.00344108 Jy ! Component: 1700 - total flux cleaned = 0.00351794 Jy ! Component: 1750 - total flux cleaned = 0.00353319 Jy ! Component: 1800 - total flux cleaned = 0.0035331 Jy ! Component: 1850 - total flux cleaned = 0.00354797 Jy ! Component: 1900 - total flux cleaned = 0.00357764 Jy ! Component: 1950 - total flux cleaned = 0.00357753 Jy ! Component: 2000 - total flux cleaned = 0.00359184 Jy ! Component: 2050 - total flux cleaned = 0.00356306 Jy ! Component: 2100 - total flux cleaned = 0.00359171 Jy ! Component: 2150 - total flux cleaned = 0.003606 Jy ! Component: 2200 - total flux cleaned = 0.00363404 Jy ! Component: 2250 - total flux cleaned = 0.00363413 Jy ! Component: 2300 - total flux cleaned = 0.00363412 Jy ! Component: 2350 - total flux cleaned = 0.00370233 Jy ! Component: 2400 - total flux cleaned = 0.00364799 Jy ! Component: 2450 - total flux cleaned = 0.00367493 Jy ! Component: 2500 - total flux cleaned = 0.00368817 Jy ! Component: 2550 - total flux cleaned = 0.0037278 Jy ! Component: 2600 - total flux cleaned = 0.00370151 Jy ! Component: 2650 - total flux cleaned = 0.00370164 Jy ! Component: 2700 - total flux cleaned = 0.0037275 Jy ! Component: 2750 - total flux cleaned = 0.00372769 Jy ! Component: 2800 - total flux cleaned = 0.00375318 Jy ! Component: 2850 - total flux cleaned = 0.00371531 Jy ! Component: 2900 - total flux cleaned = 0.0037404 Jy ! Component: 2950 - total flux cleaned = 0.0037155 Jy ! Component: 3000 - total flux cleaned = 0.00372791 Jy ! Component: 3050 - total flux cleaned = 0.00375251 Jy ! Component: 3100 - total flux cleaned = 0.00377685 Jy ! Component: 3150 - total flux cleaned = 0.00377689 Jy ! Component: 3200 - total flux cleaned = 0.00375271 Jy ! Component: 3250 - total flux cleaned = 0.00371689 Jy ! Component: 3300 - total flux cleaned = 0.00371682 Jy ! Component: 3350 - total flux cleaned = 0.00372867 Jy ! Component: 3400 - total flux cleaned = 0.00371689 Jy ! Component: 3450 - total flux cleaned = 0.00372852 Jy ! Component: 3500 - total flux cleaned = 0.0037749 Jy ! Component: 3550 - total flux cleaned = 0.00376342 Jy ! Component: 3600 - total flux cleaned = 0.00375193 Jy ! Component: 3650 - total flux cleaned = 0.00372918 Jy ! Component: 3700 - total flux cleaned = 0.00376291 Jy ! Component: 3750 - total flux cleaned = 0.00378509 Jy ! Component: 3800 - total flux cleaned = 0.00384084 Jy ! Component: 3850 - total flux cleaned = 0.00379648 Jy ! Component: 3900 - total flux cleaned = 0.0038295 Jy ! Component: 3950 - total flux cleaned = 0.00378575 Jy ! Component: 4000 - total flux cleaned = 0.00376406 Jy ! Component: 4050 - total flux cleaned = 0.00379651 Jy ! Total flux subtracted in 4096 components = 0.00379644 Jy ! Clean residual min=-0.000547 max=0.000630 Jy/beam ! Clean residual mean=-0.000002 rms=0.000173 Jy/beam ! Combined flux in latest and established models = 0.789403 Jy keep ! Adding 252 model components to the UV plane model. ! The established model now contains 345 components and 0.789403 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap .//J0726+7911_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.324 x 1.514 at 63.09 degrees (North through East) ! Clean map min=-0.0018396 max=0.66001 Jy/beam ! Writing clean map to FITS file: .//J0726+7911_X_map.fits wmodel .//J0726+7911_X_map.mod ! Writing 345 model components to file: .//J0726+7911_X_map.mod wobs .//J0726+7911_X_uvs.fits ! Writing UV FITS file: .//J0726+7911_X_uvs.fits wwins .//J0726+7911_X_map.win ! wwins: Wrote 5 windows to .//J0726+7911_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.660007 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000172514 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0784147 0.0784147 0.156829 0.313659 0.627317 1.25463 2.50927 5.01854 10.0371 20.0742 40.1483 80.2966 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.66 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3825.81 quit ! Quitting program ! Log file .//J0726+7911_X_dfm.log closed on Mon Jan 20 00:01:36 2020