! Started logfile: .//J0600-1858_C_dfm.log on Mon Jan 20 00:00:03 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     .//J0600-1858_C_uvm.fits
! Reading UV FITS file: .//J0600-1858_C_uvm.fits
! AN table 1: 17 integrations on 21 of 21 possible baselines.
! AN table 2: 16 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.974026 visibilities/baseline/integration-bin.
! Found source: J0600-1858
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 76 lines of history.
! 
! Reading 5400 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J0600-1858_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 17 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.007432Jy  sigma=16.317695
! Fit after  self-cal, rms=0.896957Jy  sigma=14.460945
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.131 mas, bmaj=12.08 mas, bpa=-13.44 degrees
! Estimated noise=0.93346 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0806325 Jy
! Component: 100  -  total flux cleaned = 0.0982157 Jy
! Total flux subtracted in 100 components = 0.0982157 Jy
! Clean residual min=-0.003897 max=0.004904 Jy/beam
! Clean residual mean=0.000008 rms=0.000984 Jy/beam
! Combined flux in latest and established models = 0.0982157 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.0982157 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053588Jy  sigma=0.678260
! Fit after  self-cal, rms=0.053574Jy  sigma=0.678180
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.824 mas, bmaj=11.91 mas, bpa=-13.15 degrees
! Estimated noise=0.630134 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0053158 Jy
! Component: 100  -  total flux cleaned = 0.00718985 Jy
! Component: 150  -  total flux cleaned = 0.00813451 Jy
! Component: 200  -  total flux cleaned = 0.00875884 Jy
! Total flux subtracted in 200 components = 0.00875884 Jy
! Clean residual min=-0.002062 max=0.001921 Jy/beam
! Clean residual mean=0.000002 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.106975 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 51 components and 0.106975 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053116Jy  sigma=0.668467
! Fit after  self-cal, rms=0.053128Jy  sigma=0.668436
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.824 x 11.91 at -13.15 degrees (North through East)
! Clean map  min=-0.0020035  max=0.10418 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.05     HN        1.07     KP        0.95     
!   LA        0.94     OV        1.05     PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.93     FD        1.05     HN        0.97     KP        0.98     
!   NL        0.96     OV        0.95     PT        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        1.07     KP        1.02     
!   LA        0.95     OV        1.04     PT        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.95     FD        1.08     HN        1.00     KP        1.00     
!   NL        1.00     OV        0.89     PT        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.03     HN        1.06     KP        0.92     
!   LA        0.97     OV        1.01     PT        0.94     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.95     FD        0.97     HN        1.08     KP        0.99     
!   NL        1.02     OV        0.99     PT        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.05     KP        1.00     
!   LA        0.93     OV        1.00     PT        0.93     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        0.97     HN        0.98     KP        0.94     
!   NL        1.02     OV        0.96     PT        1.06     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        0.96     KP        1.01     
!   LA        1.06     OV        1.00     PT        1.05     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     FD        0.98     HN        1.00     KP        1.03     
!   NL        1.03     OV        0.95     PT        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.02     KP        1.01     
!   LA        1.07     OV        1.06     PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        0.99     HN        1.00     KP        0.97     
!   NL        1.05     OV        1.00     PT        1.05     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.96     HN        1.00     KP        0.98     
!   LA        1.02     OV        1.12     PT        1.05     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.95     FD        0.95     HN        0.97     KP        1.00     
!   NL        1.05     OV        1.03     PT        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.03     HN        1.01     KP        1.05     
!   LA        1.10     OV        0.98     PT        0.94     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     FD        0.97     HN        1.04     KP        0.96     
!   NL        1.04     OV        1.02     PT        0.98     
! 
! 
! Fit before self-cal, rms=0.053128Jy  sigma=0.668436
! Fit after  self-cal, rms=0.053340Jy  sigma=0.661489
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.842 mas, bmaj=11.9 mas, bpa=-13.18 degrees
! Estimated noise=0.629008 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000298794 Jy
! Component: 100  -  total flux cleaned = -0.000261317 Jy
! Component: 150  -  total flux cleaned = -0.00024439 Jy
! Component: 200  -  total flux cleaned = -0.000244556 Jy
! Total flux subtracted in 200 components = -0.000244556 Jy
! Clean residual min=-0.001583 max=0.001884 Jy/beam
! Clean residual mean=-0.000007 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.10673 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 70 components and 0.10673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053326Jy  sigma=0.661221
! Fit after  self-cal, rms=0.053348Jy  sigma=0.661131
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053348Jy  sigma=0.661131
! Fit after  self-cal, rms=0.053288Jy  sigma=0.661071
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.847 mas, bmaj=11.88 mas, bpa=-13.17 degrees
! Estimated noise=0.628839 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000111933 Jy
! Component: 100  -  total flux cleaned = -8.3175e-05 Jy
! Component: 150  -  total flux cleaned = -8.27823e-05 Jy
! Component: 200  -  total flux cleaned = -9.34989e-05 Jy
! Total flux subtracted in 200 components = -9.34989e-05 Jy
! Clean residual min=-0.001586 max=0.001847 Jy/beam
! Clean residual mean=-0.000007 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.106636 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 84 components and 0.106636 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053281Jy  sigma=0.660936
! Fit after  self-cal, rms=0.053280Jy  sigma=0.660930
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (34.8, 51.9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000670277 Jy
! Component: 100  -  total flux cleaned = 0.000260577 Jy
! Component: 150  -  total flux cleaned = -0.000112117 Jy
! Component: 200  -  total flux cleaned = -0.000266267 Jy
! Total flux subtracted in 200 components = -0.000266267 Jy
! Clean residual min=-0.001549 max=0.001356 Jy/beam
! Clean residual mean=-0.000006 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.10637 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 116 components and 0.10637 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053191Jy  sigma=0.659645
! Fit after  self-cal, rms=0.053184Jy  sigma=0.659572
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053184Jy  sigma=0.659572
! Fit after  self-cal, rms=0.053085Jy  sigma=0.659477
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.85 mas, bmaj=11.86 mas, bpa=-13.16 degrees
! Estimated noise=0.628053 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.04968e-05 Jy
! Component: 100  -  total flux cleaned = -0.000260615 Jy
! Component: 150  -  total flux cleaned = -0.000361641 Jy
! Component: 200  -  total flux cleaned = -0.000474767 Jy
! Total flux subtracted in 200 components = -0.000474767 Jy
! Clean residual min=-0.001488 max=0.001333 Jy/beam
! Clean residual mean=-0.000007 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.105895 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 136 components and 0.105895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053055Jy  sigma=0.659083
! Fit after  self-cal, rms=0.053052Jy  sigma=0.659070
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000104847 Jy
! Component: 100  -  total flux cleaned = -0.000221659 Jy
! Component: 150  -  total flux cleaned = -0.000275579 Jy
! Component: 200  -  total flux cleaned = -0.000343706 Jy
! Total flux subtracted in 200 components = -0.000343706 Jy
! Clean residual min=-0.001456 max=0.001335 Jy/beam
! Clean residual mean=-0.000007 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.105552 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 160 components and 0.105552 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053037Jy  sigma=0.658885
! Fit after  self-cal, rms=0.053035Jy  sigma=0.658882
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053035Jy  sigma=0.658882
! Fit after  self-cal, rms=0.052943Jy  sigma=0.658832
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.725 mas, bmaj=11.42 mas, bpa=-13.85 degrees
! Estimated noise=0.670993 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.83736e-05 Jy
! Component: 100  -  total flux cleaned = -0.000181823 Jy
! Component: 150  -  total flux cleaned = -0.00025448 Jy
! Component: 200  -  total flux cleaned = -0.000321412 Jy
! Total flux subtracted in 200 components = -0.000321412 Jy
! Clean residual min=-0.001197 max=0.001406 Jy/beam
! Clean residual mean=-0.000010 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.10523 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 181 components and 0.10523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052934Jy  sigma=0.658690
! Fit after  self-cal, rms=0.052932Jy  sigma=0.658683
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000109418 Jy
! Component: 100  -  total flux cleaned = -0.00015633 Jy
! Component: 150  -  total flux cleaned = -0.000232561 Jy
! Component: 200  -  total flux cleaned = -0.000294249 Jy
! Total flux subtracted in 200 components = -0.000294249 Jy
! Clean residual min=-0.001171 max=0.001411 Jy/beam
! Clean residual mean=-0.000010 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.104936 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 191 components and 0.104936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052927Jy  sigma=0.658608
! Fit after  self-cal, rms=0.052925Jy  sigma=0.658605
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.852 mas, bmaj=11.85 mas, bpa=-13.15 degrees
! Estimated noise=0.627814 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.852 x 11.85 at -13.15 degrees (North through East)
! Clean map  min=-0.0016519  max=0.1038 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.145 mas, bmaj=11.99 mas, bpa=-13.44 degrees
! Estimated noise=0.937439 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0809452 Jy
! Component: 100  -  total flux cleaned = 0.0985968 Jy
! Component: 150  -  total flux cleaned = 0.10231 Jy
! Component: 200  -  total flux cleaned = 0.102672 Jy
! Total flux subtracted in 200 components = 0.102672 Jy
! Clean residual min=-0.002980 max=0.003170 Jy/beam
! Clean residual mean=-0.000000 rms=0.000734 Jy/beam
! Combined flux in latest and established models = 0.102672 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.102672 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.852 mas, bmaj=11.85 mas, bpa=-13.15 degrees
! Estimated noise=0.627814 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0014398 Jy
! Component: 100  -  total flux cleaned = 0.00202757 Jy
! Component: 150  -  total flux cleaned = 0.00202904 Jy
! Component: 200  -  total flux cleaned = 0.00206752 Jy
! Total flux subtracted in 200 components = 0.00206752 Jy
! Clean residual min=-0.001696 max=0.001311 Jy/beam
! Clean residual mean=-0.000006 rms=0.000396 Jy/beam
! Combined flux in latest and established models = 0.104739 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 59 components and 0.104739 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.725 mas, bmaj=11.42 mas, bpa=-13.85 degrees
! Estimated noise=0.670993 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000440631 Jy
! Component: 100  -  total flux cleaned = 0.000513702 Jy
! Component: 150  -  total flux cleaned = 0.000452535 Jy
! Component: 200  -  total flux cleaned = 0.00037809 Jy
! Total flux subtracted in 200 components = 0.00037809 Jy
! Clean residual min=-0.001283 max=0.001406 Jy/beam
! Clean residual mean=-0.000009 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.105117 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.43124e-05 Jy
! Component: 100  -  total flux cleaned = -5.0515e-05 Jy
! Component: 150  -  total flux cleaned = -9.53393e-05 Jy
! Component: 200  -  total flux cleaned = -0.000123303 Jy
! Total flux subtracted in 200 components = -0.000123303 Jy
! Clean residual min=-0.001224 max=0.001417 Jy/beam
! Clean residual mean=-0.000010 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.104994 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 103 components and 0.104994 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.852 mas, bmaj=11.85 mas, bpa=-13.15 degrees
! Estimated noise=0.627814 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000153376 Jy
! Component: 100  -  total flux cleaned = -0.000337209 Jy
! Component: 150  -  total flux cleaned = -0.000464167 Jy
! Component: 200  -  total flux cleaned = -0.000498631 Jy
! Total flux subtracted in 200 components = -0.000498631 Jy
! Clean residual min=-0.001586 max=0.001306 Jy/beam
! Clean residual mean=-0.000007 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.104496 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 126 components and 0.104496 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052938Jy  sigma=0.658831
! Fit after  self-cal, rms=0.052932Jy  sigma=0.658808
wmodel J0600-1858_C_map.mod
! Writing 126 model components to file: J0600-1858_C_map.mod
wobs   J0600-1858_C_uvs.fits
! Writing UV FITS file: J0600-1858_C_uvs.fits
wwins  J0600-1858_C_map.win
! wwins: Wrote 2 windows to J0600-1858_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000343835 Jy
! Component: 100  -  total flux cleaned = -0.000274514 Jy
! Component: 150  -  total flux cleaned = -0.000253454 Jy
! Component: 200  -  total flux cleaned = -0.000212663 Jy
! Component: 250  -  total flux cleaned = -0.000173791 Jy
! Component: 300  -  total flux cleaned = -0.0001551 Jy
! Component: 350  -  total flux cleaned = -0.000119869 Jy
! Component: 400  -  total flux cleaned = -0.000137579 Jy
! Component: 450  -  total flux cleaned = -0.000188092 Jy
! Component: 500  -  total flux cleaned = -0.000269376 Jy
! Component: 550  -  total flux cleaned = -0.00028538 Jy
! Component: 600  -  total flux cleaned = -0.000348332 Jy
! Component: 650  -  total flux cleaned = -0.000454951 Jy
! Component: 700  -  total flux cleaned = -0.000529604 Jy
! Component: 750  -  total flux cleaned = -0.000602544 Jy
! Component: 800  -  total flux cleaned = -0.000631055 Jy
! Component: 850  -  total flux cleaned = -0.000645172 Jy
! Component: 900  -  total flux cleaned = -0.0006729 Jy
! Component: 950  -  total flux cleaned = -0.000645812 Jy
! Component: 1000  -  total flux cleaned = -0.0007132 Jy
! Component: 1050  -  total flux cleaned = -0.000699816 Jy
! Component: 1100  -  total flux cleaned = -0.000725847 Jy
! Component: 1150  -  total flux cleaned = -0.000699947 Jy
! Component: 1200  -  total flux cleaned = -0.000725411 Jy
! Component: 1250  -  total flux cleaned = -0.00068798 Jy
! Component: 1300  -  total flux cleaned = -0.000725047 Jy
! Component: 1350  -  total flux cleaned = -0.000749313 Jy
! Component: 1400  -  total flux cleaned = -0.000725103 Jy
! Component: 1450  -  total flux cleaned = -0.000748881 Jy
! Component: 1500  -  total flux cleaned = -0.00077237 Jy
! Component: 1550  -  total flux cleaned = -0.000772494 Jy
! Component: 1600  -  total flux cleaned = -0.00074965 Jy
! Component: 1650  -  total flux cleaned = -0.000795002 Jy
! Component: 1700  -  total flux cleaned = -0.000794886 Jy
! Component: 1750  -  total flux cleaned = -0.000794794 Jy
! Component: 1800  -  total flux cleaned = -0.000827473 Jy
! Component: 1850  -  total flux cleaned = -0.000816758 Jy
! Component: 1900  -  total flux cleaned = -0.000859304 Jy
! Component: 1950  -  total flux cleaned = -0.000848618 Jy
! Component: 2000  -  total flux cleaned = -0.000817249 Jy
! Component: 2050  -  total flux cleaned = -0.000806982 Jy
! Component: 2100  -  total flux cleaned = -0.000776364 Jy
! Component: 2150  -  total flux cleaned = -0.000756268 Jy
! Component: 2200  -  total flux cleaned = -0.000746198 Jy
! Component: 2250  -  total flux cleaned = -0.000686872 Jy
! Component: 2300  -  total flux cleaned = -0.000667405 Jy
! Component: 2350  -  total flux cleaned = -0.000599577 Jy
! Component: 2400  -  total flux cleaned = -0.000590102 Jy
! Component: 2450  -  total flux cleaned = -0.000561629 Jy
! Component: 2500  -  total flux cleaned = -0.000523938 Jy
! Component: 2550  -  total flux cleaned = -0.000514514 Jy
! Component: 2600  -  total flux cleaned = -0.000458855 Jy
! Component: 2650  -  total flux cleaned = -0.000440464 Jy
! Component: 2700  -  total flux cleaned = -0.000422181 Jy
! Component: 2750  -  total flux cleaned = -0.000394993 Jy
! Component: 2800  -  total flux cleaned = -0.000377017 Jy
! Component: 2850  -  total flux cleaned = -0.000341226 Jy
! Component: 2900  -  total flux cleaned = -0.000305757 Jy
! Component: 2950  -  total flux cleaned = -0.000261812 Jy
! Component: 3000  -  total flux cleaned = -0.000252998 Jy
! Component: 3050  -  total flux cleaned = -0.000209565 Jy
! Component: 3100  -  total flux cleaned = -0.000175115 Jy
! Component: 3150  -  total flux cleaned = -0.000158025 Jy
! Component: 3200  -  total flux cleaned = -0.000157995 Jy
! Component: 3250  -  total flux cleaned = -0.000132648 Jy
! Component: 3300  -  total flux cleaned = -9.06528e-05 Jy
! Component: 3350  -  total flux cleaned = -9.89934e-05 Jy
! Component: 3400  -  total flux cleaned = -9.05499e-05 Jy
! Component: 3450  -  total flux cleaned = -4.93623e-05 Jy
! Component: 3500  -  total flux cleaned = -2.48644e-05 Jy
! Component: 3550  -  total flux cleaned = -4.86436e-07 Jy
! Component: 3600  -  total flux cleaned = 2.37468e-05 Jy
! Component: 3650  -  total flux cleaned = 4.78501e-05 Jy
! Component: 3700  -  total flux cleaned = 6.38022e-05 Jy
! Component: 3750  -  total flux cleaned = 8.76088e-05 Jy
! Component: 3800  -  total flux cleaned = 0.000111227 Jy
! Component: 3850  -  total flux cleaned = 0.00015035 Jy
! Component: 3900  -  total flux cleaned = 0.000150384 Jy
! Component: 3950  -  total flux cleaned = 0.0001814 Jy
! Component: 4000  -  total flux cleaned = 0.000196788 Jy
! Component: 4050  -  total flux cleaned = 0.000227352 Jy
! Total flux subtracted in 4096 components = 0.000234946 Jy
! Clean residual min=-0.000473 max=0.000419 Jy/beam
! Clean residual mean=-0.000002 rms=0.000158 Jy/beam
! Combined flux in latest and established models = 0.10473 Jy
keep
! Adding 322 model components to the UV plane model.
! The established model now contains 448 components and 0.104731 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   .//J0600-1858_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.852 x 11.85 at -13.15 degrees (North through East)
! Clean map  min=-0.0014376  max=0.10387 Jy/beam
! Writing clean map to FITS file: .//J0600-1858_C_map.fits
wmodel .//J0600-1858_C_map.mod
! Writing 448 model components to file: .//J0600-1858_C_map.mod
wobs   .//J0600-1858_C_uvs.fits
! Writing UV FITS file: .//J0600-1858_C_uvs.fits
wwins  .//J0600-1858_C_map.win
! wwins: Wrote 3 windows to .//J0600-1858_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.103871 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000157544 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.455021 0.455021 0.910042 1.82008 3.64017 7.28034 14.5607 29.1213 58.2427
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.103 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  659.31 
quit
! Quitting program
! Log file .//J0600-1858_C_dfm.log closed on Mon Jan 20 00:00:07 2020